Need PI7.1 technical configuration guide

I used to see the XI3.0 configuration guide on the internet.
Now I cannot find  XI/PI  configuration guide any more.
Any idea where to get the link?
Thanks a lot!

Jenni,
Your heading and your description varies completely! Are u looking for PI 7.1 or XI/PI config guide.
By the way are u looking for Demo config guide, if yes then -https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/soa/soa-management/exchange-infrastructure/xi-design_configuration/configuration%20guide%20sap%20exchange%20infrastructure%203.0%20demo%20examples.pdf
If not, kindly ignore it.
raj.

Similar Messages

  • PI7.0 Configuration Guide

    I need PI 7.0 configuration guide. Can someone please post a link. I couldn't find it.
    I found the XI3.0 configuration guide at https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF
    Thanks

    Hi,
    check this link:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
    SAP Library at Configuring End-to-End Monitoring
    Refer to the url http://help.sap.com/saphelp_nw70/helpdata/EN/06/5d1741b393f26fe10000000a1550b0/frameset.htm and follow the links from there.
    Thanks
    swarup

  • Need configure guide for job progress monitor in JSM

    Hello Guys,
    I have received  an requirement to setup job progress monitoring in JSM(job schedule monitor).i have done my search in Google for configuration guide, but i could not find it.
    My Requirement:- i need to monitor the jobs progress(running on manage system) which consists on nearly 10 setps.End user need to monitoring the job progress  using PI diagram.
    Guys  if any one of you have done this setup please help me with configuration setps.
    Please provide your inputs on this.
    Regards,
    Pavan

    Hi Pavan,
    That should have been my place from where I would have start
    I hope Jansi, Prakhar or Karthik can redirect you on this.
    Meanwhile, If I get any thing, I will share it.
    Regards

  • Need Post installation configuration guide for PI 7.0

    Hi,
    Does anybody have Post installation configuration guide for PI 7.0 ?
    Our basis team has installed PI 7.0.
    Now we need to do the post installation.
    Do we need to do all configuration steps we use to do for XI 3.0 or is it different in PI 7.0.
    Your help appreciated.
    Thanks,
    Vinod

    HI,
    See the below links
    Post Installation steps for activating Adobe Document Services in SAP XI NW 2004S
    -/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
    Link for posnt installation guide
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
    https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
    Regards
    Chilla

  • Need ADS Configuration guide for 04s.

    Hi All,
    Does anybody have ADS configuration guide for Netweaver 04's?
    I need it.
    Could you send me the url for that?
    Thanks in advance.

    Hi shweta,
    Go to <a href="http://service.sap.com/adobe">http://service.sap.com/adobe</a>  -> Media Library -> Documentation. You will find the ADS configuration guide for Nw04s.
    if u r not able to find..update with ur mail id..ill send that to u.
    Regards,
    Sharadha

  • Post XI configuration guide needed

    Hi,
    Does anyone have a post installation configuration guide for XI.
    There are porblems like not able to monitor in RWB, take s/w components into IR, cant create scenario in ID. User has all the roles. But more configuration is there i gues. Please forward the same to the email id [email protected]
    Thanks
    Anju

    Sanju,
    This guide is available on SDN itself.
    Please do a quick search on SDN and you are bound to find it,
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
    http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
    Regards
    Bhavesh

  • Need Cisco ISE Configuration Guide

    Dear Friends,
    Please send me cisco ISE configuration guide ASAP.
    Thanks & Regards,
    Rahul Wankhade

    Check the following link for Step by step configuration guide it cover all the deployment related to ISE
    http://www.cisco.com/en/US/solutions/ns340/ns414/ns742/ns744/landing_DesignZone_TrustSec.html
    ************Do rate helpful posts**********************

  • Configuration guide for ASA Ipsec.

    Ho guys.
    I need configuration guide for ASA Ipsec using Cli.
    Thank you.
    Sent from Cisco Technical Support iPad App

    Hi,
    please check the below link
    http://www.cisco.com/en/US/products/ps9422/products_configuration_example09186a0080b4ae61.shtml?referring_site=smartnavRD
    http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808c9950.shtml
    Thanks and Regards,
            ROHAN 

  • Reg.ECC 6 MM step by step configuration guide

    Dear Experts
    I am in need of ECC 6 MM step by step configuration guide.Kindly provide me. thanks in advance..Installation ECC 6 over and waiting for configuration guide
    Pls help urgently...
    Thanks
    Rajakumar.K

    www.sap-img.com/sap-mm.htm
    www.flipkart.com/search-books/freesapmmfunctionalityandtechnicalconfigurationmartinmurray+download
    www.certbible.org/sap-presssap-mm-funtionality-and-technical-configuration-scan/
    Please Read the Rules Use the Search

  • Need Document/steps for configuring Samba,apache,tomcat

    Hi all,
    I need steps/document for configuring samba,tomcat,apache in solaris 10 x86.please guide.please send to [email protected]

    docs.sun.com should have a lot od the Solaris specific documentation- I don't know how much it would have have specifically on Samba, Apache and Tomcat etc.
    Documentation on configuring Samba and Apache (and probably Tomcat) are available on the respective websites. You may want to Read The existing technical Manuals then post questions on specific issues that are not covered by the exisitng documentaion.

  • Help needed in Time Capsule configuration

    Hello everybody,
    sorry in advance for the probably dummy questions, but I have just bought a Time Capsule and would like some advice in order to obtain the best possible configuration for my needs (the configuration guide was not so clear to me).
    I linked the TC via Ethernet to my modem/router (I have a Vodafone Station 2), and I have the following requirements:
    1) let the TC become the primary WiFi source: what is the best way to do it? Shall I deactivate the Wi-Fi on the Vodafone Station? Shall I create a new network or extend the existing one?
    2) create a guest network (possibly with another password): I can I do it? I didn't succeed in doing it...
    3) I would like to use the TC internal hard disk both as a sort of reporitory for my MacBook Air backup, and at the same time as an external hard disk; can I do it directly or should I create a partition on the disk?
    4) I would like to add another external HD via USB to the TC, in order to have access to its content through various devices (MacBook, iPhone, iPad, PC) linked to the WiFi network. Also in this case I couldn't get it... How should I do that?
    5) Finally, I have a question: is it possible to remotely access (e.g. via 3G) the TC hard disk?
    Thank you in advance for any help you can give me!!
    Regards

    dottorslump wrote:
    Hello everybody,
    sorry in advance for the probably dummy questions, but I have just bought a Time Capsule and would like some advice in order to obtain the best possible configuration for my needs (the configuration guide was not so clear to me).
    I linked the TC via Ethernet to my modem/router (I have a Vodafone Station 2), and I have the following requirements:
    1) let the TC become the primary WiFi source: what is the best way to do it? Shall I deactivate the Wi-Fi on the Vodafone Station? Shall I create a new network or extend the existing one?
    You do not want to extend.. well actually you cannot extend a non-apple router.. so put that out.
    The TC will probably have to be in bridge mode.. but it can become the primary wifi source.. simply create a wireless network. Turn off wireless in the vodafone station.
    But from your other requirement of a guest network.. you cannot do that in bridge on the TC.. so why not use the vodafone station as your guest network. Give TC wireless a different name. Fix the channels. Try to have them sit a bit apart from one another.. A few Meters at least.
    2) create a guest network (possibly with another password): I can I do it? I didn't succeed in doing it...
    You cannot do guest network with the TC in bridge. So you need to either bridge the modem and use pppoe client in the TC.. that depends on if your ISP supports PPPoE authentication.
    3) I would like to use the TC internal hard disk both as a sort of reporitory for my MacBook Air backup, and at the same time as an external hard disk; can I do it directly or should I create a partition on the disk?
    This is not really a good idea.. You cannot partition a TC.. Mixing data and backups can be done but it is not necessarily going to work well. The primary design of the TC is a backup target for TM and mainly looking at laptops.
    Look at Q3 here. http://pondini.org/TM/Time_Capsule.html
    Pondini is our guru on all things TM.
    Particularly remember any files offloaded to the TC have no backups.. And TC is not reliable enough to trust. It is a single hard disk and has no form of automated backup.. nor can TM backup a network drive. Any backup of info on the TC has to be done manually.
    4) I would like to add another external HD via USB to the TC, in order to have access to its content through various devices (MacBook, iPhone, iPad, PC) linked to the WiFi network. Also in this case I couldn't get it... How should I do that?
    The USB port of the TC is renowned for being underpowered even if the hard drive is powered you might need a powered hub. Some hubs work and some don't so even that is not simple.
    USB drive has to be formatted Mac Extended Journelled. Or fat32.
    5) Finally, I have a question: is it possible to remotely access (e.g. via 3G) the TC hard disk?
    In your case the answer is probably.. but this will not be easy.
    Apple's only method is BTMM via iCloud, but the TC must be the main router in the network.
    That means you need to bridge your existing modem.
    You might be able to get it to work via the existing modem. Please google remote access time capsule.
    You will need to port forward AFP to the TC in the modem and use ddns to find the correct address unless your ISP has given you a static IP.
    Sorry for the glass half empty answer.

  • Student self services - configuration guide or cook book

    Dear All,
    We have recently upgraded to EHP4 and enabled student self services.
    But when I changed my program of study no workflow is triggered in the backend.
    Do I need to do any configuration for this ?
    Is there any configuration guide or cook book available for student self services.
    Thanks in Advance,
    Best Regards,
    Aleem Mohiuddin.

    Hi Aleem,
    You can find cookbooks for configuring SLcM on the following page: Student Lifecycle Management [original link is broken]
    For the 'Change of Program' functionality you need to configure the following workflow to your customer need: COP_APPROVAL (WS template: 29800011 via trx PFWS).
    Please also make sure you have applied note 1321998.
    Best regards,
    Rob

  • IC WebClient 5.0 Configuration Guide....

    Hi,
    Could someone please mail me the configuration guide for for IC WebClient (CRM Version 5.0) to my mail id [email protected]?
    Thanks in advance...
    Regards,
    Phani.

    Hello Shivraj,
    As you said and as it's stated in several SAP Guides: 'Configuration guides are only available in SAP Solution Manager'
    But I can't find the config guides in our Solution Manager system...Does our Solution Manager people need to do something in Solution Manager so that I can find the config guides in our Solution Manager?
    If anyone has the answer please get back... so that I can put an end to my configuration guide hunt And does someone have a configuration guide for CRM 5.0? If so I would really appreciate if someone could mail it to me at [email protected]
    Kind regards
    Saima
    Message was edited by: Saima Shah

  • PI(XI 7.0) configuration guides

    Hi,
    Does anybody have Post installation configuration guide for PI 7.0 ?
    Our basis team has installed PI 7.0.But I couldn't see any Configurations completed like Integration Engine Configuration,RFC Connections(LCRSAPRFC,SAPSLDAPI.......)
    and many other steps we use to do for XI 3.0.
    Do we need to do all configration steps we use to do for XI 3.0 or is it different in PI 7.0.
    any help appericiated.
    Thanks,
    Rekha.

    Hi,
    >>>>Do we need to do all configration steps we use to do for XI 3.0 or is it different in PI 7.
    all user names are different (instead of XIDIRuser you have PI.... ) so the config is not the same
    check this link:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
    Regards,
    michal

  • Configuration guide on Solution Manager Service Desk Scenario

    Hi all,
    I have just setup a Solution Manager 3.2 system and have followed the configuration guide, SP9.pdf which directs me to use SPRO to configure it. However, after going thru the SPRO, it doesn't gives me specific steps to setup the Service Desk scenarios. I could not find any specifc steps on creating a service Desk, business partners or configuration on the satelite system. Please kindly provide me with the relevant guide. Thanks in advance.

    Hi Guan,
    I don't know if my message is being sent too late for you, but only now I read your question..
    You have to go through Customer Relationship Management configuration in order to customize Service Desk and Change Request Management the way you need. Before, I believe you must have in your hands the specification of your Organizational Structure, who will be each business partner in your organization, with the correct responsibilities, then you draw the workflow you want to implement, which is the complete landscape, have your RFC connection to SAP working in order to send support messages to them (this should be ok if you already have SolMan working, it needs the RFC connection in order to update the services..). Once you define your processes, based on the ITIL, then you can start configuring your Service Desk. Inside the IMG of the SolMan->Service Desk you have the CRM steps you need (if you have SP09 or up), and the documentation inside the IMG are really useful. If you are not used to CRM, I suggest you take a look at the CRM Documentation, because most of the things are better explained there. Actions, Conditions for Actions, Business partners, Installed Base with default business partners, Solution Database..
    You may be a little bit confused reading the lots of docs that SAP delivers about SolMan Service Desk regarding using SLF1 or SLFN transaction Type. SLF1 was the old one, used by SolMan 3.1, and it has some differences from SLFN. In fact, SLF1 is more complex. It has items, SLFN does not. It uses a Service Confirmation, SLFN does not.. and so on..
    If you need more information, please let me know. I have been working with Service Desk and Change Request Management for one year, in Scandinavia, maybe we can exchange tips.
    Best regards,
    Raquel Cunha
    São Paulo, Brazil

Maybe you are looking for