Need pin connection for HP Mini 210 headset jack

Hi,
Anybody have the pin connections used on the headset jack on the Mini 210? I'd like to plug some external audio into this jack and need to know if the mic input is the tip or ring of the 3.5 mm jack.
Thanks.
This question was solved.
View Solution.

Because the answers to your second and third questions are YES ans YES.
And, If you search this forum, you will see my previous thread on this very subject,
http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/HP-Mini-210-Netbook-Headset-Audio-Combi-Soc...

Similar Messages

Why do I need to connect my Ipad mini with my Mac Book Pro via iCloud?

Why do I need to connect my Ipad mini with my Mac Book Pro via iCloud? I don't have iCloud on my MacBook Pro and only intend to use the mini to check e-mail and use Garage Band and Photo Booth for song writing when traveling . . .

Thanks Community! I solved the problem. In fact it was not a problem but lack of understanding. These guys at Apple are way ahead in thir thinking. I will try to explain as short as I can.
In Lion, ihe Prefferences/Display show only two choices: 6-7 steps of resolution and some color tab. No two screens, no two display to overlap, nothing for us to do. "That was the problem"! Everything is automatic.
When I connected the HDMI cable to the Miniport into a T-bolt slot, the TV screen showed the "spiral galaxy" how Zyriab is calling it. In fact he gave me the best clue. That shows the connection is good. But where is the Mac Book image?
You have to drag it to the right out of the Mac Book display area, and "voila!" it will continue on the TV screen. The same with the mouse pointer, push it out ofthe Mac Book display area and you see it on the TV sreen. Good image, you can keep the max resolution, etc. The sound is still on the Book's speakers. I have to figure that out.
Thank everybody, especialy Zyriab, ne was the closest.
High regards to everybody

How to recover hp pre-installed games and office after system restore for HP Mini 210-4127se?

how to recover hp pre-installed games and office after system restore for HP Mini 210-4127se?

Hi,
You can reinstall them from Recovery Manager by clicking on Start=> All Programs.
If you have performed a complete HP Recovery using F11 then all the software should be there. If you have performed a minimized recovery then you can install applications from recovery manager...If none of these works then you'll need USB recovery..
Here are the links that will guide you through the process:
Using Recovery Manager to Restore Software and Drivers (Windows 7)
Performing an HP System Recovery (Windows 7)
Order USB Recovery
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

HT1657 in order to watch the dowloaded movied do I need internet connection for it?

in order to watch the dowloaded movied do I need internet connection for it?

If you are purchasing the movie, then once the movie has completed downloading, an Internet connection will not longer be needed. That should apply to rentals as well, but people report from time to time that even after the rental has downloaded iTunes still asks to connect to the iTunes Store.
Regards.

Need password reset for hp mini 1101

need password reset for hp mini 1101cnu932bkxrplease help

Hi: Please read this post which should resolve your dilemma. http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/System-Halt... Then... You can: 1. Use the unlock code you generated to enter the BIOS
2. Disable all passwords that are enabled in the BIOS's security menu.
3. If asked for current password - type the unlock code
4. For new password, just press ENTER key
5. Repeat the same for verify password column.

What do I need to connect my Mac Mini to a TV using the S-video jack?

Radio Shack didn't have anything in the store and suggested
that what I needed (something with an S-video connector
at the adapter end and a co-ax/F-connector at the TV end)
would cost $100.
What should I be looking for? I'd like the option to connect
my Mac Mini to a TV (with enough resolution to read text,
which isn't the case with a video-RCA cable), especially in
a hotel room (using the Mac Mini as a laptop!).

The DVI to video adapter
<http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/6454000/wo/jP1F dznaaoNs2dPRALa1K0FqrB2/3.0.21.1.0.8.25.7.11.2.3>
will give best results using the S-Video. Next best is composite video. If your TV set does not have either of these, you will need a RF modulator to connect to the TV antenna connector. For best results get a modulator that takes S-video. It should cost a lot less than $100.00 Radio Shack has one for $25
<http://www.radioshack.com/product/index.jsp?productId=2103095&cp=&origkw=rfmodulator&kw=rfmodulator&parentPage=search>
No matter what connection you use, a standard TV will not give you better than 640 x 480 resolution, so it will always be hard to read small text.

Where to buy charger for hp mini 210 - 104OSL

i'm a hp mini 210-1040SL owner, my charger was not functioning anymore. I just want to know where can i avail a new one. I'm from the Philipinnes.
I'll wait for your response, thank you.

Hi,
Please try the following site:
http://h20141.www2.hp.com/hpparts/?cc=US&lang=EN&jumpid=hpr_r1002_usen
or from eBay (same):
http://www.ebay.com.au/itm/Charger-19v-HP-MINi-Notebook-Laptop-AC-Adapter-210-1015TU-A107-/280677679...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Motherboard for HP mini 210

can I replace my broken motherboard on HP mini 210 1020ez (Intel Atom N450 1.66GHz) with the one for model HP mini 210 1000?

your service guide is here:
http://h10032.www1.hp.com/ctg/Manual/c02241565.pdf
It will support any of the below system board part numbers.
608951-001
608952-001
608953-001
608954-001
608955-001
608956-001
608957-001
608958-001
The service guide has details about the different part numbers. (some support WWAN, some Bluetooth)
-Bryan
I am an HP employee

Wusb11 only connecting to wireless connections for 5 mins at a time??

My wireless reciever wusb11, will only connect to wireless connections within 5 mins of plugging it in. If i unplug it then plug it back in "I get another 5 mins of internet then it drops all connections and says no networks in range.

first off , update the drivers of the WUSB11 .. and try changing the following settings on the wireless router / AP ..
channel - 1 or 11
security mode - wpa
beacon interval - 50
RTS and fragmentation threshold - 2304

Help needed in connecting a Mac Mini to AT&T DSL

Any suggestions on how to troubleshoot this problem will be appreciated. I'm helping a friend connect a Mac to the Internet using AT&T DSL. The computer is a Mac Mini, 1.42 GHz PPC G4, running OS X 10.5. It is connected by Ethernet to an AT&T DSL modem. The Mini's Network preference is configured to connect using DHCP.
Strange symptoms include:
1. Safari will not connect to the Internet.
2. However, Firefox WILL connect and loads all websites I tried.
3. Apple Mail will connect and download messages from my friend's previous email address (not AT&T), but will not connect to allow me to configure his new AT&T account.
4. Other programs that need a network connection won't run; for example, the Software Update preference, when checking for new updates, claims that there is no network connection.
Do these symptoms indicate that the Mini's network preferences are not configured correctly, or that the DSL modem is not configured correctly?
More information: with the modem is an "Installation Wizard Disc" CD with a setup program. It's supposed to work for any PPC G3 or greater Mac, which certainly fits this Mini. BUT, when run on the Mini, the setup program displays a message that the computer's processor is "unrecognized". Then the setup program quits. I ran the setup program on my MacBook Pro laptop connected to the DSL modem. It went through a lengthy process with messages about "configuring the modem". After this, I was able to connect to the Internet with Safari using the laptop. This seems to indicated that there's nothing basically wrong with the modem or DSL connection. However, I can't run the setup program on the Mini. (The above symptoms were after getting the laptop to work, then switching the Ethernet connection back to the Mini.)

This is a strange problem, especially since Firefox is working OK.
You might try using OpenDNS. They have a good set of instructions about how to do this here:
https://www.opendns.com/start
It's possible that AT&T's DNS servers aren't responding fast enough, and Safari is timing out quicker than Firefox.
The other option is to call AT&T and ask for support in accessing their DSL modem.
A third option would be to download a system maintenance utility like Yasu
http://jimmitchell.org/projects/yasu/
and use it to clear all the caches in the system -- in case the Mini somehow is using stale information about the net.

MSI P35 Neo2-FR do i need JPWR1 Connected for 2 x ATI Radeon 3850 256mb cards ?

hello,
Ive recently Brought a MSI P35 Neo2-FR motherboard and been running in single Sapphire 3850 256mb so decided to install my second Sapphire 3850 256mb.
PSU Ive got is a Hyper Type M 580watt but at moment Ive used all connections 4 pin molex connections and 2 to power second sapphire 3850MB card waiting for reply from hyper about what connection i can put the extender on safely coming off 1 that's used.
Its running Stable at moment without the JPWR1 connected just wondering if its for high end cards like the 2900XT that use's a lot more power then the 3850 and 3870's
Scores I'm getting so far are with a Intel Core 2 duo E8200
Single card - 3DMark 2006 - 9436 3DMarks
Crossfire enabled - 3DMark 2006 - 12356 3DMarks
Are these scores about right too ?

Quote from: Del UK on 17-February-08, 04:42:47
Which PSU, do you use Kimpsu?
Would have a guess it's dual +12V rail......
Antec or Seasonic.......
My current PSU is an Antec NeoHE 550W (though I've had many others too, like Zalman, Seasonic and Enermax), so in theory it has three 12V rails, 18A each. Well, of course it cannot feed 18A on each rail simultaneously, but still considering that's the limit, the limit should not be a bottle-neck. Luckily they are devided logically enough, one rail for the directly attached cables (which is the motherboard really) and two for the five detachable cables. And the two rails are logically divided, so putting my PCI-e cables at both ends I get pretty decent amps for two GFX cards (one rail for each) and the motherboard. The rest (HDDs, optical drives) are then attached to cables connected next to those cables, so in fact HDDs are on one rail together with one GFX card, and optical drives (and my fan controller) is on another rail with the other GFX card. Thus I get pretty even distribution between rails (lucky me).
It was one of the nicest quiet PSUs at the time of purchase. If I were to buy a PSU now I would probably get a Corsair, probably HX520 or HX620, but they have multiple 12V rails... VX series is fine too, only that there are no detachable cables, so although it is an option, I really need to think if I wan't a PSU that only has fixed cables...
Having multiple rails suck a bit (although on most PSUs they are not really separate rails, but still current limited), but luckily single rail PSUs are coming back after a couple of years of "multi rail fashion".
And yeah, PSUs made by Seasonic are pretty popular these days, like the Antec NeoHE I have, Corsair HX series, VX450 and so on.
PS. Good guess, though guessing Antec or Seasonic covers pretty much of the PSUs out there that are of a "quality" brand, at least if Seasonic covers the PSUs made by Seasonic for other companies like Corsair. And I don't mean other suck, just judging by how large % of all quality PSUs are Antec. And yes, there are a few models from Antec that really suck and have high failure rates, and cannot be called quality (like the CWT manufactured Smartpowers and the older Truepowers, also by CWT). Judging by just the company that puts the stickers on the case is not always wise, especially with Antec...
PPS. Judging from your signature, you have an Enermax and a Corsair VX550 (which is manufactured by CWT I believe). How do you like your Corsair? Is it quiet? I've been considering it as an option to replace my Antec (I'd like to have a single 12V rail). Also the TX-series is an option.

X-Fi XtremeGamer Fatal1ty Pro Series Pin connections for panel in pc c

Which pins do i need to use to connect up on the soundcard for the mic and speaker socket that is built in on my pc case to work ?
So that i dont have to keep reaching around the back to unplug my speakers and plug in my headphones !
If i have got the speakers already plugged in the back with a microphone, can i, will i be able to just plug the headphones in on the pc cases headphone port and the soundcard disable the speakers automatically ?
Is the a diagram somewhere that shows the pin names or configurations ?
Hope Someone can help
Regards DeluDeD

Hi,?What Creative does is hiding information that could be useful to their buyers in hope that buyers ruin their soundcards and run on to buy another, this is the only possible explanation to what they are doing. Just think this: ?Why in the hell they hide this information that could be so helpful and almost risk free and why do they charge a ridiculous price for the X-Fi I/O Dri've?
In my Country (Portugal) a X-Fi ExtremeMusic Costs around 0.00? (around 88 dollars) and the I/O Dri've costs (in Creative?s Site) 04.5. (around 84 dollars), but if you buy the Sound Blaster? X-Fi Platinum (that has all the above and seems that the sound card is better) it only costs around 60? (around 28 dollars). So, if you buy the two first items in separate you?ll pay 24.5. (72.00 dollars) and pay more 54.5. (around 44 dollars) than if you had bought the Platinum.
I really think that they should change the category from accessories to Deluxe Expensi've Options.
The good news to Creative is that I wont buy anymore products from Creative, I?ve stopped to sell the speakers since they launched a series of Cambridge a few years ago with a subwoofer that sound ruined (I bought 30 of them) and never replaced them with a good one, now they do this and I say no more.
Over the last 5 years in the Computer Assembly business I probably sold more that 3.000 products from Creative but my reaction to this attitude from Creative is the last that I can take. I?m not going to buy I/O Dri'ves to every PC that I sell with a Creative Sound Card!!!
I?M BUYING PHILIPS NOW!!!!
Good Luck Creative?

Replace keyboard for hp mini 210

The keyboard on my hp mini is bad need a replacement, but unable to find it on the website? hp spare # 590527-001

Hi
Please call HP Technical support over the phone and place the order for Keyboard might be the part number may be changed.
http://h20141.www2.hp.com/hpparts/
Please change the country and you could order the part by yourself.
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

I need boot disk for Mac mini

I accidentally must have formatted my hdd while trying it partition for win 7. Now I need a boot disk. How do I get it up and running again?

Hello,
If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
http://www.chipmunk.nl/klantenservice/applemodel.html
http://www.appleserialnumberinfo.com/Desktop/index.php
How to find the serial number of your Apple hardware product...
http://support.apple.com/kb/HT1349

HT1657 To watch the movie (After is downloaded it) do I need Internet Connection for watching it?

I was wondering if I can see a movie (rented) in a plane for example, where I won't have Internet Connection.

As long as it has been fully downloaded then you should be able to watch it whilst offline.

Need pin connection for HP Mini 210 headset jack

Similar Messages

Maybe you are looking for