Need Plant Code for Tax GL MIRO and VF01 in SAP

Dear Expert,
Our system, for a0 (i.e,s 0% tax) whenever this tax code on po, once doing miro user adding manually some gl and doing postig
For this gl plant picking all tax gl, but apart from a0, example 1a, 5b, 10c i.e., 1%, 5%, 10% for this ftxp, ob40 gl a/c maintained.
If we using a/c creating po and at the time miro, gl a/c posting automatically, but plant is not picking. I need to do the configuration, it should pick from po.
Plese give any steps or solution to make
Regards
Mani.S

Hi
Here there is no problem with gl, amount or any field, only plant code.
If 0% tax code, in miro for service po adding manually gl account after posting for all tax gl system picking from po.
But 1%., 2%...etc., for this gl available in ob40, that working fine. if doing miro syst picking automatically gl, amt but plant code not picking from po. After posting there is no plant for tax gl (which one picked automatically) for gr ir a/c plant is there.
How get the plant code from po for tax gl at the time miro, vf01
Regards
Mani.S

Similar Messages

Why I need a code for rent a film and where ist the code? (I dont have a card)

Why I need a code for rent a film and where ist the code? (I dont have a card)

it's unclear what you mean
you say you dont have a card which I guess is you don't have a creditcard
in which case the other option is to pay by a giftcard which include a code which you put in
because to rent you have to pay otherwise it's not really renting

I need the code for creating popup windows and code for open and close

I can write the code for creating popup window , i am getting problem while trying to open and closing that popup windows.
Can anybody help me in that pls ?
Regards
Sreeni.

Hi
For pop up window
IWDWindowInfo windowInfo = (IWDWindowInfo)wdComponentAPI.getComponentInfo().findInWindows("PopWin");
IWDWindow window = wdComponentAPI.getWindowManager().createModalWindow(windowInfo);
window.setWindowPosition (300, 150);
window.show();
wdContext.currentYourNodeElement().setPopupAttribute(window);
For closing window code
IWDWindow window = wdContext.currentYourNodeElement().getPopupAttribute();
window.hide();
window.destroyInstance();
For more infornation refer this link
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20d2def3-f0ec-2a10-6b80-877a71eccb68&overridelayout=true
This link is very useful for you.
Regards
Ruturaj
Edited by: Ruturaj Inamdar on Aug 13, 2009 9:10 AM

Need XSLT code for comparing 2 fields and looping the repatitive attirbute filed to destination schema

Need an Custom XSLT code... where i need to compare 2 attribute fields( Name and Start Date) fromInputMessagePart_0 with the 2 fields ( Name and Start Date) from InputMessagePart_1 and need to map the repetitive attribute field ( phoneno) from InputMessagePart_1
to attribute field( PhoneNo of Destination schema.
this will look like this
Source Schema
Destination Schema
InputMessagePart_0                                                 Item
Record
      - Name
-Name
      - StartDate
- StartDate
      - Addres
- PhoneNo
InputMessagePart_1
     -Name
     -StartDate
     -PhoneNo
Final output should look like by
Details
Name
StartDate
PhoneNo
Details
Name
StartDate
PhoneNo
Details
Name
StartDate
PhoneNo
Details
Name
StartDate
PhoneNo
Need urgent assistance
Thank you in advance
BizTalkLearner

could you also post your sample input instance and expected output instance
Please mark the post as answer if this answers your question. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

S_ALR_87012357 report - Advance Return for Tax on sales and purchase

Hi Friends,
I would like to know few things in regards the VAT report S_ALR_87012357 report - Advance Return for Tax on sales and purchase:
(1) What information brings the S_ALR_87012357 report?
(2) As of now this report displays tax against vendor line item and not expense line item. Is there any other report that shows all the positions lines affected to tax?
(3) Is it possible that the tax line stays only in the expense line account and not in the vendor line account or not any intercompany line account?
(4) Is it possible S_ALR_87012357 report shows information about the tax allocanted in expense accounts and not in vendor accounts?
Appreciate a faster response.
Thanks in advance.

Please try report S_ALR_87012359. This report gives you opportunity to choose account selection.
I am unsure how the SAP is setup in your organisation. S_ALR_87012357 should pick up expenses selection as well.
This report entirely depends on tax code selection.

I Need Java code for following Algorithm

* I Need Java code for following algorithm. Kindly any one help.
1. Read the contents (ideas and its corresponding scores) from two files named as 'a' and 'b'.
2. Stored the file 'a' contents in array a[].
3. Stored the file 'b' contents in array b[].
4. compare both files like
if(a.equals(b[j])
Writing the common idea and add the score from file 'a' and 'b'.
else
write the uncommon idea and its score..
For example :
Form Agents.txt
action,65
architecture,85
eco-,15
essay,30
form,85
form,85
link,40
tangent,25
Form Agents1.txt
Black holes,69
essay,78
Herewith i have above mentioned two files named as Form Agents and Form Agents1.
Form Agents has eight fields
Form Agents1 has two fields
--> 'essay' is common in two files, so store the idea 'essay' and add the score from Form Agents score is '30' and Form Agents1 has 78 (essay 108).
Finally it stores idea in another file with uncommon fields also.
Please help us.

We have tried with following code.
But we cant add the scores.
For Example:
Form Agents.txt --> has "essay,30"
Form Agents1.txt --> has "essay,78"
Result is: essay,108
Finally it stores idea in another file with uncommon fields also.
So Any one pls correct the following code.
try
DataOutputStream o1=new DataOutputStream(new
FileOutputStream("C:\\Interfaces\\interfaces\\temp\\BlackBoard\\My Design
World\\Project\\Material\\art\\System Agents\\Form Agents\\CandidateResponses\\Form
Agents.txt"));
//Reading the contents of the files
BufferedReader br= new BufferedReader(new InputStreamReader(new
FileInputStream("C:\\Interfaces\\interfaces\\temp\\BlackBoard\\My Design
World\\Project\\Material\\art\\System Agents\\Form Agents\\Ideological\\Form
Agents.txt")));
BufferedReader br1= new BufferedReader(new InputStreamReader(new
FileInputStream("C:\\Interfaces\\interfaces\\temp\\BlackBoard\\My Design
World\\Project\\Material\\art\\System Agents\\Form Agents\\Related\\Form
Agents.txt")));
while((s=br.readLine())!=null)
s1+=s+"\n";
while((s2=br1.readLine())!=null)
s3+=s2+"\n";
int numTokens = 0;
StringTokenizer st = new StringTokenizer(s1);
String[] a = new String[10000];
String[] br_n=new String[10000];
int i=0;
while (st.hasMoreTokens())
s2 = st.nextToken();
a=s2.substring(0,s2.length()-3);
s6=s2.substring(s2.length()-2);
br_n[i]=s6;
i++;
numTokens++;
int numTokens1 = 0;
StringTokenizer st1 = new StringTokenizer (s3);
String[] b = new String[10000];
String[] br1_n=new String[1000];
int j=0;
while (st1.hasMoreTokens())
s4 = st1.nextToken();
b[j]=s4.substring(0,s4.length()-3);
s7=s4.substring(s4.length()-2);
br1_n[j]=s7;
j++;
numTokens1++;
int x=0;
for(int m=0;m<a.length;m++)
for(int n=0;n<b.length;n++)
if(a[m].equalsIgnoreCase(b[n])){
int sc=Integer.parseInt(br_n[m]);
int sc1=Integer.parseInt(br1_n[n]);
int score=sc+sc1;
o.writeBytes(a[m]+","+score+"\n");
break;
else
o.writeBytes(a[m]+","+br_n[m]+"\n");
break;
}catch(Exception e){}

Need a code for Customer exit for extractor 0WBS_ELEMT_ATTR

Hi Guys,
I need a code for following requirement.
I have appended some fields to standard extractor 0WBS_ELEMT_ATTR which normally takes data from PRPS table. But the new fields will be getting data from PRTE and PROJ table. with common keys. Following is my code which is not working. Please help me out, I am not good in abap. Please note some lines are commented.
Thanks,
H
CODE:::::
form 0wbs_elemt_attr tables i_t_data structure biw_prps.
data: it_wbs_prps like biw_prps occurs 0.
data wa_prps like it_wbs_prps.
data: begin of it_wbs_prps occurs 0,
         PSPNR like prps-pspnr,
         POSID like prps-posid,
         PBUKR like prps-PBUKR,
         IZWEK like prps-IZWEK,
         USR10 like prps-USR10,
         USR00 like prps-USR00,
         USR02 like prps-USR02,
         OBJNR like prps-OBJNR,
       end of it_wbs_prps.
data wa_prps like it_wbs_prps.
data: begin of it_wbs_prps1 occurs 0,
          PSPNR like prps-pspnr,
          POSID like prps-posid,
        end of it_wbs_prps1.
data wa_prps1 like it_wbs_prps1.
data: begin of it_wbs_prte occurs 0,
          posnr like prte-posnr,
          PSTRT like prte-PSTRT,
          PENDE like prte-PENDE,
          ESTRT like prte-ESTRT,
          EENDE like prte-EENDE,
          ISTRT like prte-ISTRT,
          IENDE like prte-IENDE,
        end of it_wbs_prte.
data wa_prte like it_wbs_prte.
data: begin of it_wbs_proj occurs 0,
          PSPNR like proj-pspnr,
          PLFAZ like proj-plfaz,
          PLSEZ like proj-plsez,
        end of it_wbs_proj.
data wa_proj like it_wbs_proj.
refresh: it_wbs_prte, it_wbs_proj.
*it_wbs_jest.
if i_t_data[] is not initial.
Get data from PRPS WBS Master Data
     select pspnr posid PBUKR IZWEK USR10 USR00 USR02 objnr
       into corresponding fields of table it_wbs_prps
       from prps
        for all entries in i_t_data
      where POSID = i_t_data-POSID.
     sort it_wbs_prps by posid.
Get data from PRPS1 WBS Master Data
      select pspnr posid
       into corresponding fields of table it_wbs_prps1
        from prps
        for all entries in i_t_data
     where POSID = i_t_data-POSID.
    sort it_wbs_prps1 by posid.
Get data from PRTE Scheduling Data for Project Item
     if it_wbs_prps1[] is not initial.
     select posnr PSTRT PENDE ESTRT EENDE ISTRT IENDE
       into corresponding fields of table it_wbs_prte
       from prte
        for all entries in it_wbs_prps1
      where posnr = it_wbs_prps1-pspnr.
     sort it_wbs_prte by posnr.
     endif.
Get data from PROJ Project Master Data
     if it_wbs_prps1[] is not initial.
     select pspnr PLFAZ PLSEZ
       into corresponding fields of table it_wbs_proj
       from proj
       for all entries in it_wbs_prps
      where pspnr = it_wbs_proj-pspnr.
     sort it_wbs_proj by pspnr.
     endif.
loop at i_t_data.
   clear: wa_prps1, wa_prte, wa_proj.
   read table it_wbs_prps into wa_prps with key
              posid = i_t_data-posid binary search.
   read table it_wbs_prte into wa_prte with key
              posnr = wa_prps1-pspnr.
   read table it_wbs_proj into wa_proj with key
              pspnr = it_wbs_proj-pspnr.
         i_t_data-zzPBUKR = wa_prps-pbukr.
         i_t_data-zzIZWEK = wa_prps-IZWEK.
         i_t_data-zzUSR10 = wa_prps-USR10.
         i_t_data-zzUSR00 = wa_prps-USR00.
         i_t_data-zzUSR02 = wa_prps-USR02.
          i_t_data-zzPSTRT = wa_prte-PSTRT.
          i_t_data-zzPENDE = wa_prte-PENDE.
          i_t_data-zzESTRT = wa_prte-ESTRT.
          i_t_data-zzEENDE = wa_prte-EENDE.
          i_t_data-zzISTRT = wa_prte-ISTRT.
          i_t_data-zzIENDE = wa_prte-IENDE.
          i_t_data-zzPLFAZ = wa_proj-PLFAZ.
          i_t_data-zzPLSEZ = wa_proj-PLSEZ.
    modify i_t_data.
endloop.
endif.
endform.                    " 0wbs_elemt_attr

Hi,
it_wbs_prps1 .
If you are going to use this internal table to check for a null condition, shouldn't you first assign the data package to it?
For example,   it_wbs_prps1 = i_t_data[].
Because you are now using it_wbs_prps1 to select data from a table and it doesn't have any data.
Please check.
-RMP
Edit : Please ignore this. I didn't see that you are actually filling the internal table. Sorry!
Edited by: RMP on Oct 18, 2010 12:16 PM

Need a code for finding prime no.s from 0 to 100.

Hi,
i need a code for finding prime no.s from 0 to 100.
Please help me out.
Regards,
Santosh Kotra.

hai santosh,
here is an example program to find the prime number...........
EXAMPLE:
DATA: BEGIN OF primes OCCURS 0,
        number TYPE i,
        exp    TYPE i,
      END OF primes.
DATA: w_mult TYPE i,
      w_limi TYPE i,
      w_prem TYPE i.
DATA: w_outp TYPE text132.
DATA: w_rtime TYPE i,
      w_stime TYPE p DECIMALS 3.
DEFINE add_part.
sy-fdpos = strlen( &1 ) + 1.
&1+sy-fdpos(*) = &2.
condense &1.
END-OF-DEFINITION.
PARAMETERS: p_numb TYPE i,                "number to check
            p_fact TYPE c AS CHECKBOX,    "display components
            p_nbpr TYPE c AS CHECKBOX.    "nb of primes
START-OF-SELECTION.
GET RUN TIME FIELD w_rtime.
IF p_nbpr IS INITIAL OR p_numb LE 12000.
    PERFORM eratostene USING p_numb.
    add_part w_outp p_numb.
    READ TABLE primes WITH KEY number = p_numb.
    IF sy-subrc = 0.
      add_part w_outp 'is prime'.
    ELSE.
      IF p_fact IS INITIAL.
        add_part w_outp 'is not prime'.
      ELSE.
        add_part w_outp '='.
        w_limi = p_numb.
        LOOP AT primes WHERE exp GT 0.
          CHECK primes-number LE w_limi.
          IF w_prem GT 0.
            add_part w_outp '*'.
          ENDIF.
          IF primes-exp GT 1.
            add_part w_outp '('.
            add_part w_outp primes-number.
            add_part w_outp '^'.
            add_part w_outp primes-exp.
            add_part w_outp ')'.
          ELSE.
            add_part w_outp primes-number.
          ENDIF.
          w_limi = w_limi / ( primes-number ** primes-exp ).
          IF w_limi = 1.
            EXIT.
          ENDIF.
          w_prem = 1.
        ENDLOOP.
      ENDIF.
    ENDIF.
    WRITE: / w_outp.
    IF NOT p_nbpr IS INITIAL.
      DESCRIBE TABLE primes LINES sy-tmaxl.
      CLEAR: w_outp.
      add_part w_outp 'Number of primes:'.
      add_part w_outp sy-tmaxl.
      WRITE: / w_outp.
      SKIP.
      LOOP AT primes.
        WRITE: / primes-number.
      ENDLOOP.
    ENDIF.
ELSE.
    PERFORM factors.
ENDIF.
GET RUN TIME FIELD w_rtime.
w_stime = w_rtime / 1000000.
SKIP.
CLEAR: w_outp.
add_part w_outp 'Calculation time:'.
add_part w_outp w_stime.
WRITE: / w_outp.
      FORM eratostene                                               *
FORM eratostene USING in_number TYPE i.
DATA: BEGIN OF no_primes OCCURS 0,
          number TYPE i,
        END OF no_primes.
DATA: cnum TYPE i,
        dnum TYPE i,
        limi TYPE i,
        mult TYPE i,
        puis TYPE i,
        cmod TYPE i.
IF NOT ( p_fact IS INITIAL AND p_nbpr IS INITIAL ).
    limi = in_number.
ELSE.
    limi = sqrt( in_number ).
ENDIF.
cnum = 2.
WHILE cnum LE limi.
    READ TABLE no_primes WITH KEY number = cnum.
    IF sy-subrc NE 0.
      primes-number = cnum.
      mult = 2.
      puis = 1.
      dnum = mult * cnum.
      WHILE dnum LE in_number.
        READ TABLE no_primes WITH KEY number = dnum.
        IF sy-subrc NE 0.
          no_primes-number = dnum.
          APPEND no_primes.
        ENDIF.
        IF NOT p_fact IS INITIAL.
          cmod = dnum MOD ( cnum ** puis ).
          IF cmod = 0.
            cmod = in_number MOD ( cnum ** puis ).
            IF cmod = 0.
              primes-exp = puis.
              puis = puis + 1.
            ENDIF.
          ENDIF.
        ENDIF.
        mult = mult + 1.
        dnum = mult * cnum.
      ENDWHILE.
      APPEND primes.
      CLEAR: primes.
    ENDIF.
    cnum = cnum + 1.
ENDWHILE.
ENDFORM.
      FORM factors                                                  *
FORM factors.
DATA: ex_factors TYPE string,
        mod        TYPE i,
        still      TYPE f,
        factor     TYPE i,
        exponent   TYPE i,
        square     TYPE f,
        fac_string TYPE text40,
        exp_string TYPE text40.
IF p_numb LE 3.
    ex_factors = p_numb.
ELSE.
    factor = 2.
    still = p_numb.
    DO.
      CLEAR: exponent.
      mod = still MOD factor.
      WHILE mod = 0.
        exponent = exponent + 1.
        still    = still div factor.
        mod      = still MOD factor.
      ENDWHILE.
      IF exponent EQ 1.
        fac_string = factor.
        CONCATENATE ex_factors '*' fac_string
                               INTO ex_factors
                       SEPARATED BY space.
        CONDENSE ex_factors.
      ELSEIF exponent GT 1.
        fac_string = factor.
        exp_string = exponent.
        CONCATENATE ex_factors '* (' fac_string
                               '^'   exp_string ')'
                               INTO ex_factors
                       SEPARATED BY space.
        CONDENSE ex_factors.
      ENDIF.
      factor = factor + 1.
      square = factor ** 2.
      IF square GT still.
        EXIT.
      ENDIF.
    ENDDO.
    IF still GT 1.
      CATCH SYSTEM-EXCEPTIONS convt_overflow = 1.
        fac_string = factor = still.
      ENDCATCH.
      IF sy-subrc NE 0.
        fac_string = still.
      ENDIF.
      CONCATENATE ex_factors '*' fac_string
                            INTO ex_factors
                    SEPARATED BY space.
      CONDENSE ex_factors.
    ENDIF.
    SHIFT ex_factors UP TO '*'.
    SHIFT ex_factors BY 2 PLACES.
ENDIF.
WRITE: / p_numb RIGHT-JUSTIFIED.
IF ex_factors CA '*^'.
    WRITE: '=', ex_factors.
ELSE.
    WRITE: 'is prime'.
ENDIF.
ENDFORM.
HOPE THIS WILL BE HELPFULL.
regards
praba.

I need ready code for a simple paint program today

hi all I need ready code for a simple paint program today for me ics projct
plz give me a halp on this give me what you have with you and it is so good if it look like this :
Design a GUI based drawing Java application that works like a simple paint program
1-There should be a number of buttons for choosing different shapes to draw. For example, there should be a button for rectangle. If user presses the rectangle button, then he can draw a rectangle using mouse. Similarly, there should be a button for each shape(rectangle, circle, ellipse, and line etc.
2-The shapes can be filled with different colors.
3-There should be option of moving .
4- There should also be three menus including File, Shape, and Color menu.
i. File menu can have menu items New and Exit. If user selects New, the drawing area will be cleared and all shapes will be erased.
ii. Shape menu will serve the same purpose as of feature 2 described above. It will have menu items for drawing all the different shapes. For example, there will be menu item for rectangle; so user can draw a rectangle by selecting the menu item for rectangle.
iii. Color menu will serve the same purpose as of feature 3 described above. It will have menu items for all the colors which are shown in color buttons. The user can select a color from this menu and then click inside a shape to fill it with the selected color.

Read the Swing tutorial. There are sections on how to use menus and painting and all other kinds of stuff you need to do this homework assignment. Nobody here is going to write the code for you:
http://java.sun.com/docs/books/tutorial/uiswing/TOC.html

Need T.Code for "Classify G/L Accounts for Document Splitting"

Hi All,
I need the T.Code Document Splitting "Classify G/L Accounts for Document Splitting"
Menu Path is:
IMG-Fin. A/c- General Ledger A/c- Business transaction - Document Splitting - Classify G/L Accounts for Document Splitting
Thanks & Regards,
Mohan.

Need T.Code for "Define Document Splitting characteristics for G/L Accounting and
Define Document Splitting method

Set up Company Codes for Contract Accounts Receivable and Payable

HI,
I need clarification on "Set up Company Codes for Contract Accounts Receivable and Payable"
When a company code "ABCD" isn't set up for contract accounts receivable and payable (Menu path:
SAP Insurance -> Collections/Disbursements -> Organizational Units -> Set up Company Codes for Contract Accounts Receivable and Payable), are postings on this company code "ABCD" within FS-CD not allowed and blocked ?
Is it mandetory to specify company codes to post in Contract Accounts Receivable and Payable in SAP FS-CD.

Yes . It is mandatory to extend company code chart of accounts to CA/CR and FSCD.
Srinivas

Hello sir,i need labview code for a code which is written in matlab,latter one is attached with this message.

hello sir,i need labview code for a code which is written in matlab...
clc;
close all;
clear all;
Ez= zeros(1,200);
Hy=zeros(1,200);
Ca=1;
Cb=.4519;
n=1;
while(n<1500)
for k = 2:200
Ez(k)=Ez(k) + Cb*(Hy(k)-Hy(k-1));
end
Ez(1)=1;
for k=1:199
Hy(k)=Hy(k)+Cb*(Ez(k+1)-Ez(k));
end
plot(Ez,'b')
hold on
plot(Hy,'r')
hold off
pause(0.001);
n=n+1;
end
thanku

Well, this code is quite trivial and if you have to learn LabVIEW anyway, you might as well try to implement it.
A few things to remember:
The first array element in LabVIEW has index #0, while in matlab it has index #1, so everything dealing with array indices needs to be adjusted slightly.
The zeroes function equivalent is "initialize array".
Keep the array in a shift register as you update elements.
use FOR loops.
Use one of the graphs to display the data.
LabVIEW Champion . Do more with less code and in less time .

I need activation code for my ipad

PLeas i need activation code for my ipad becouse i cant open it ana i know the apple id and password

Only the person who initiated the Activation Lock can remove it. if purchased used/2cd hand,
contact the seller for assistance. This is what they need to do:
Prepare your device to sell or give away
If seller refuses or cannot be contacted, the iPad is useless. There is no workaround for
Activation Lock.
iCloud: Find My iPhone Activation Lock in iOS 7 & later
http://support.apple.com/kb/HT5818?viewlocale=en_US&locale=en_US
http://support.apple.com/kb/TS4515
If you are the original purchaser, gather up proof of purchase and take that proof + the iPad
to a physical Apple store where they may be able to assist you.
What is the exact complete wording of the error message you are receiving?

Needed a code for Creating a Log File in java so that its size is limited

Hi
I need the code for developing a log file using threads so that the log file size is limited
and if the size of the log file is increasing above 1Mb,another log file has to be created automatically and the log have to be printed into that new file.
Thanks in advance

package cms.web.log;
import java.io.*;
import java.util.Calendar;
import cms.web.WebUser;
*     Log is generated by JEditor 1.0.0
*     @Project      : cms
*     @Version      : 1.0.0
*     @Created date : 11:07:40 PM Thursday, 25/07/2002
*     @Author       :
*     @Organization :
*     @Copyright    : (c) 2002
*     An utility class used to write information, especially error messages, to
*     log file so that they can be viewed at later time by administrators.
*     Extra information such as date & time they occures & where they are thrown...
*     are automatically included and append to the end of log file.
*     Log files will increase with the format "name_n" where n is file counter
public class Log implements Serializable
      *     logs marker
     static final String START= "\n\0";
      *     parent directory that contains log files
     private static File parent;
     private PrintStream out;
     private String name;
      *     to count how many log for the current stream
     int counter;
      *     maximum number of logs for each log file
     int max;
     public static void init(File parent)
          if (!parent.exists())
               parent.mkdirs();
          Log.parent= parent;
     public Log(String name, int max)
          this.name= name;
          this.max= max;
          file= getLastFile();
          counter= countLogs(file);
          out= openStream(file);
     public synchronized void appendLog(String log)
          if (log == null || log.length() == 0)
               return;
          count();
          try {
               out.println(START+ counter+ " | "+ getCurrentTime()+ " | "+ log);
               out.flush();
          } catch (Exception e) {}
      *     Append the given log to log file.
     synchronized void appendLog(String msg, WebUser user)
          if (msg == null || msg.length() == 0)
               return;
          count();
          try {
               out.println(START+ counter+ "----------------------------------------------------------");
               out.println(getCurrentTime());
               out.println(user != null? "User:"+ user.getFullName(): "User: public user");
               out.println(msg);
               out.println("\n----------------------------- end -----------------------------\n");
               out.flush();
          } catch (Exception e) {}
      *     Append the given exception to log file
     synchronized void appendLog(Throwable error, WebUser user)
          if (error == null)
               return;
          count();
          synchronized (out)
               try {
                    out.println(START+ counter+ "----------------------------------------------------------");
                    out.println("Exception occured at "+ getCurrentTime());
                    out.println(user != null? "User: "+ user.getFullName(): "User: public user");
                    error.printStackTrace(out);
                    out.println("----------------------------- end -----------------------------\n");
                    out.flush();
               } catch (Exception e) {}
     private String getCurrentTime()
          Calendar c= Calendar.getInstance();
          return
               parse(c.get(Calendar.HOUR_OF_DAY))+ ":"+               // 0 --> 23
               parse(c.get(Calendar.MINUTE))+ ":"+                     // 0 --> 59
               parse(c.get(Calendar.SECOND))+ " "+                     // 0 --> 59
               parse(c.get(Calendar.DAY_OF_MONTH))+ "/"+                // 1 --> 31
               parse(c.get(Calendar.MONTH)+ 1)+ "/"+                     // 1 --> 12
               c.get(Calendar.YEAR);                                        // yyyy
     private String parse(int n)
          return n< 10? "0"+ n: ""+ n;
     private void count()
          counter++;
          if (counter> max)
               incrementFile();
               counter= 1;
     private void incrementFile()
          File file= null;
          int n= 0;
          while ((file= new File(parent, name+ n+ ".log")).exists())
               n++;
          if (out != null)
               out.close();
          out= openStream(file);
     private PrintStream openStream(File file)
          try {
               if (file.exists())
                    return new PrintStream(new FileOutputStream(file.getPath(), true));
               else
                    return new PrintStream(new FileOutputStream(file.getPath()));
          } catch (IOException e) {
               throw new RuntimeException(e.getMessage());
     private int countLogs(File file)
          int count= 0;
          InputStream in= null;
          try {
               in= new FileInputStream(file);
               int n;
               while ((n= in.read()) != -1)
                    if (n == '\0')
                         count++;
          } catch (IOException e) {
          } finally {
               if (in != null)
                    try {
                         in.close();
                    } catch (IOException e) {}
          return count;
     private File getLastFile()
          File file= new File(parent, name+ "0.log");
          File curr;
          int n= 1;
          while ((curr= new File(parent, name+ n+ ".log")).exists())
               file= curr;
               n++;
          return file;
     protected void finalized()
          if (out != null)
               out.close();

Transaction code for viewing invoice document and Claims document

Hi Experts,
Can u please tell me the transaction codes for viewing invoice document and claims document in ECC.
I am in CRM and i do not know about the ECC transaction codes.
request you 2 help.
Thanks and Regards
Shilpi

hi,
MM flow:
purchase Requestion (ME51)
Request for Quatation (ME41)
Quatation from different vendors (ME47)
price comparision (ME49)
purchase order send to vendors (ME22)
goods reciepts (MIGO)
logistic invoice verification (MIRO)
SD flow:
Enquirey (VA11)
Quatation (VA21)
sales order processing (VA01)
delivery (VL01)
billing (VF01)
Also follow this link.
The specified item was not found.
i hope this will help you out
-Thanks & regards
Saurabh Goel

Need Plant Code for Tax GL MIRO and VF01 in SAP

Similar Messages

Maybe you are looking for