Need plug in driver for Motorola Entice w766

Hi there. I need a driver or plug in for my Motorla Entice w766. Motorola, Mac, and any third party I've found doesn't support my phone, has anyone or can anyone find a driver so I can sync my phone to my Mac? Thanks,
Matt

Bluetooth File Exchange? Where is that?
It's in the Utilities folder on your Mac.
By the way navigating folders is for picking up photos taken by the phone.
It may be that this new phone does not support the required Bluetooth profile(s) that allows you to browse the phone. There's over 20 Bluetooth profiles for different functions, and different phones support different ones. To transfer photographs you may need to initiate the sending from the menus of the phone itself, rather than picking them up from the Mac side.
Is *Bluetooth Sharing* checked in the Sharing system preferences pane?
Plus I want to synchronize addresses, not just send them over to the phone.
I realise that, but as no iSync Plugin exists for this phone you won't be able to do that, so I offered the send vCards option as a workaround for quickly getting contacts onto the phone.
Do you think a GSM software would work to do all that and iCal?
No. It's an alternative workaround for the lack of an iSync Plugin. It doesn't provide syncing - just reading/writing of the Address Book.

Similar Messages

I need an audio driver for Yoga 13 with Windows 7 Pro 64 bits English

Hi all,
I downgraded my Yoga 13 from Windows 8 to Windows 7 pro 64 bits, and ever since then I have a problem with my microphone.
Skype finds the microphone and can use it, calls are all working fine, but any other program using audio does not work with the microphone.
After troubleshooting, I concluded that I need to update the driver but I cannot find it. Anything that I find on the Lenovo support pages does not install (event the one found on this page: http://support.lenovo.com/fr/fr/downloads/ds002860).
After looking at this post: http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/I-need-an-Internet-driver-for-Yoga-13-wit.... I figured I would to be provided with the link by someone from Lenovo support.
Here's the hardware ID of the soundcard: HDAUDIO\FUNC_01&VEN_14F1&DEV_506E&SUBSYS_17AAA001&REV_1000. In Windows it is recognized as High Definition Audio (in the device manager).
Thanks a lot for your help.

Hello,
From looking at the Yoga 13 Hardware Maintenance Manual and downloading the driver package from the Realtek Wireless LAN & Bluetooth Driver for Microsoft Windows 8 (64-bit) - IdeaPad Yoga 13 page and extracting (but not running) it to look at the contents, it appears the Yoga 13 uses a wireless LAN card based on Realtek RTL8732 chipset.
I would suggest that you try downloading the drivers, expanding, but not installing them on to a USB flash drive or SD card, then plugging that into the Yoga 13, running the Device Manager (filename: DEVMGMT.MSC), clicking on the appropriate entry for the wireless network adapter, selecting update, and then choosing the Browse my computer for driver software option, pointing that to the location of the unpacked drivers. Perhaps Device Manager will find the correct drivers to install that way.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Need to download driver for Laserjet 4v. Can anyone tell me where I can obtain it?

I had to have my desktop reloaded & Windows XP no longer has the "plug & play" driver for the HP Laserjet 4v. HP apparently no longer has the driver which I find unusual. I need to know where I can download a copy or have someone attach it to an email ([email protected]). If anyone can help, I would be grateful.
Thanks, Julian

Here is a good link to where the driver is located. There appears to be a bad link to the normal way to find it.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Need an instrument driver for Stahl product

Hi guys!
I need an instrument driver for the coil temperature measurement device ER-230.01B (company Stahl)!
Does anybody of you have this driver?
I have already searched in the NI Driver list and couldn't find it.
Thx,
Nobby

Hi Nobby_83,
Unfortunately we don’t have the driver for your Stahl device. You have to contact Stahl to know if they have the driver.
http://www.stahl.de/en/start.html
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/

I need the correct driver for an infrared remote control (ENE CIR receiver) for Pavilion DV4-2173nr

I need the correct driver for an infrared remote control (ENE CIR receiver) for Pavilion DV4-2173nr.
The receiver that came with my notebook is a black model one (see picture below), with the following information in its bottom label:
RC1762302/00
3139 228 50021
HP SPS: 435743-001
HP: HSTNN-PRO7
RC6 ir
CP06 60808 A 146218 REV. B
I never managed to make it work, from the very beginning. I know it is working, because I replaced the battery for a brand new one and it shows a blinking IR LED when I press any button and point it to a digital camera.
Searching for "ENE CIR receiver driver" is useless 'cause I received more than one hundred answers - I tried four of them but none worked so far.
So, instead of trying the whole bunch, I am crying for help - could someone please tell me which driver is the correct one for this remote model?
Thanks in advance and regards,
Mike
P.S.: I am using Windows 7 Ultimate 64-bit and Ubuntu 12.04 in this notebook

http://ftp.hp.com/pub/softpaq/sp46501-47000/sp46741.exe
File name:
sp46741.exe [1/1, 1.04M]
System requirements:
No additional prerequisites
Released:
2009-12-31
Version:
2.7.4.0 A
Compatibility:
Microsoft Windows 7 (32-bit), Microsoft Windows 7 (64-bit)
Fix/Enhancement:
Original Software/Drivers

NEED windows 8 driver for MSI fx400 plisss

I need windows 8 driver for msi fx-400 because MSI TDE technology, MSI GPU Boost technology, my power up, camera, and bluetooth not work, plisss i need it thanks

Quote from: flobelix on 17-January-13, 02:40:21
FX400 is not among the notebooks verified to work with Win8 (http://event.msi.com/2012/windows8/index.html). Therefor MSI won't provide any drivers or support for using Win 8 on this computer.

Need sata f6 driver for neo 4 ultra (winxp 64)

or do u even need a f6 driver for windows 64?
yes i have a sata drive.

if you unrar the 64 bit drivers in a folder you get a folder ide
inside are 2 more folders
one says xp one windows 2000
best i can see you need to copy every thing in the xp folder to the floppy
except the raid utility folder
these are what it tells you to copy for 32 bit
Driver for Win2000/XP
Please copy CDROM:
nVidia\System\CK804\IDE\WIN2K or WINXP
disk1 file
idecoi.dll file
nvata.cat file
nvatabus.inf file
NvAtaBus.sys file
nvcoi.dll file
nvide.nvu file
nvraid.cat file
nvraid.inf file
nvraid.sys file
nvraidco.dll file
nvuide.exe file
txtsetup.oem file
so thats every thing bar the raid utility as i said

I need a USB driver for Bootcamp?

So I'm trying to get Windows 7 on my Mac and I have a disc with the ISO burned on it, but when I try to install it with Bootcamp I get the message
"There is no USB drive connected to the system. Please insert a USB drive to continue."
I don't have a USB driver and I don't see why I need one.

Follow the Bootcamp instructions http://www.apple.com/support/bootcamp/.
Do you have an internal optical drive? Do you have a retail copy of Windows? Are you using the internal optical drive for your retail copy of Windows? Do you have anything else plugged into the usb ports?

I need an Internet driver for Yoga 13 with Windows 7 operating system

I downgrade my yoga 13 operating system from Windows 8 to Windows 7 because it has a confliction with my software that I need to use. After that, I cannot connect it to Internet. Does anyone know the driver that I can use for this circumstance please? I also have some unknow devices listed on the Device Manager such as SM Bus Controller, PCI Data Acquisition and Signal Proceussing Controller, USB Controller, etc.

Hello,
From looking at the Yoga 13 Hardware Maintenance Manual and downloading the driver package from the Realtek Wireless LAN & Bluetooth Driver for Microsoft Windows 8 (64-bit) - IdeaPad Yoga 13 page and extracting (but not running) it to look at the contents, it appears the Yoga 13 uses a wireless LAN card based on Realtek RTL8732 chipset.
I would suggest that you try downloading the drivers, expanding, but not installing them on to a USB flash drive or SD card, then plugging that into the Yoga 13, running the Device Manager (filename: DEVMGMT.MSC), clicking on the appropriate entry for the wireless network adapter, selecting update, and then choosing the Browse my computer for driver software option, pointing that to the location of the unpacked drivers. Perhaps Device Manager will find the correct drivers to install that way.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Need a printer driver for a PIXMA MG2900 that will work on my MacBook Pro Operating System OSX 10.4.11

I have just purchased a Canon Pixma MG2900 printer and need to find a driver for this printer that will work with my MacBook Pro Operating System OSX Version 10.4.11.
I was directed to iTunes PIXMA/MAXI, but it didn't seem to download for me. It did say that it was for IPads or IPhones, not sure that it's intended for use on a computer.

Probably best to go to a library and submit your resume there.
You can make many web browsers claim to be ie. Here is how.
TenFourFox -- It's a port of the latest FireFox to run on older hardware and software.
"World's most advanced web browser. Finely tuned for the Power PC."
-- works for me on 10.4. Supports 10.5
http://www.floodgap.com/software/tenfourfox/
alternative download site:
http://www.macupdate.com/app/mac/37761/tenfourfox
OmniWeb uses the lastest Safari framework. The open source WebKit. Other browsers like Safari and iCab use the OS version of WebKit. The OmniWeb downloaded dmg includes it's own copy of the latest WebKit.
http://www.omnigroup.com/products/omniweb/
Safari 4.1.3 for Tiger
http://support.apple.com/kb/DL1069
iCab - The Taxi for the Internet
http://www.icab.de/
What is my user agent?
http://whatsmyuseragent.com/
You want to change your user agent to be ie.
in tenfourfox
tools > add-ons
seearch for change user agent
install
user agent switcher
tools > User agent switcher
change to ie.

Need Windows 7 driver for HP color laserjet 3500

Urgently need a driver for my HP color laserjet 3500 to install on new laptop with Windows 7! HP and Windows sites say there is no driver for Windows 7. I really love my printer but need the driver. What can I do?

According to this HP website, Vista driver only works for 64 bits win7

Need networked printer driver for HP LJ 1022N for Windows 8.1 x64

We've had this printer setup on our Windows 2003 print server for years & now that I'm transitioning to a Windows 2012 print server & Win 8.1 clients, the only driver I'm finding is a host-based driver for usb. Is there another driver I can use on the print server for this printer? It wasn't listed in the UPD supported list nor is it in the HP list in the Add driver dialog after updating from Windows Updates. I appreciate any help you can provide!

Hello Glorfindel,
Welcome to the HP Forums.
I understand your concerns with the Laserjet 1022N. If you're looking for a Windows 2012 print server, then there is no full feature software. Now, for your Windows 8.1, there is a full feature software on the HP website here.
If you need help install this software over a network connection, then please follow this HP document on Installing the Printer Software in Windows 8.1 for a USB or Network Connection.
Please let me know if you have any further questions.
I worked on behalf of HP.

In need of XP Driver For DV4-1147cl

Hi to all who read this post and hope some one can help me i need drivers for Pavilion DV4-1147cl XP drivers so if any one can help , at least the sound driver i cann't make it work so plzzzzzzzzz i tried some post here that have drivers for this laptop but it didn't work the file wasn't found so any help plz i need it so much and thx

By asumming you have managed to install XP and all drivers work fine except audio driver, try the following steps.
1. Please make sure the instalation of MS-UAA
How?
There should be a listing for Microsoft UAA Bus Driver for High Definition Audio.
If not, you should have a PCI with yellow!.
Right click it and Update Driver,
No to Connect, No to Search and last Install Automatically.
2. Install IDT High-Definition Audio CODEC Driver, sp41693, vista driver, reported works in XP, here
You need to use devcon utility, let save it for the next steps
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

I need a print driver for the HP Color LaserJet 3600 for OS X 10.8.3

Now that I have updated to the newest OS I'm frustrated because neither Hewlett Packard nor Apple has a driver for the printers that I have. So I can't print from my laptop to any of my printers. I just need a driver option for and HP Color LaserJet 3600, Canon MF5900 Series, and a Hewlett Packard CP1518.

Information/possible solution:
Printer Setup
https://discussions.apple.com/message/4367330#4367330
HPIJS for Mac OS X
Gimp - Print

I need an instrument driver for Neocera LTC-21 Temperature Controller and am having problems sending the IDN? string to the same instrument.

Hi,
When I use the instrument wizard in LabVIEW 5.0, to indentify a device (Neocera LTC-21 Temperature Controller), I receieve the following error:
Error.
There was an error sending this string.
VISA error code returned was:
-1073807339
Error -1073807339 occured at VISA Read.
Possible reasons:
VISA: (Hex 0xBFFF0015) Timeout expired before operation completed.
Although, the manual for this instrument states that the response should be a string of characters in the form of "Neocera Model LTC-21 version".
Also, I do not have a driver for this instrument, inspite of checking on the NI Instrument
Divers Network and the company website(www.Neocera.com).
I would truely appreciate if someone can help me.
Thanks,
Kunal.

I could not find any drivers for that instrument. You may just have to make your own. As for getting the device to respond, there are a couple of things you can do. If you are using GPIB: First, you might want to just reset the device by turning it on and off. If there are other instruments on the same bus, make sure 2/3 of them have their power on. Try communicating with it through IBIC. Here is a page that will help.
http://www.ni.com/support/gpib/max/ibic.htm
IBIC communicates with the GPIB on a very base driver level and you set everything manually step by step, so you can see where the break down is. Also make sure you are entering the "*IDN?" and all other commands correctly. Check the device manual to see what commands it should respond to and if there ar
e any special settings you might need. If you are doing serial communication, you may want to check to see if you need a null modem cable for it to function. There also may be a dip switch on the device that switches between serial and GPIB communication.

Need plug in driver for Motorola Entice w766

Similar Messages

Maybe you are looking for