Need power amp for compactDAQ analog out

I am using the CompactDAQ in a controls application and need a recommendation for an amplifier that will enable me to provide power proportional to the Analog Out signal, which has voltage but no notable current. I know the recommendation would be application dependent, but I am hoping for something rather generic for powering motors, heaters, pumps, etc.

You may also find it helpful to search the GlobalSpec in the Affiliated Product Advisor- it's just a good resource when looking for additional equipment to go with your NI hardware. Happy shopping!
aNItaB
Applications Engineer
National Instruments
Digital Multimeters

Similar Messages

I need power amp for my i pad

I want Power amp for my i pad. IF any one know please let me know
Thanks
sureshkumar

If you are for better sound from your iPad, there are a myriad of portable devices that your iPad can be connected to to increase the iPad's sound levels.
Search for iPad speakers, speaker systems, or audio for iPad.
If you want to connect your iPad's audio to some sort of stereo or surround sound power amplifier that has to be connected to a larger pair of audio speakers, any on the market will work. You need to purchase a cable that connects to the iPad's headphone jack that splits the stereo signal to left and right channels that can be plugged into the left and right channels of the audio amplifier.

Need power schematics for a 20" cinema display a1038 (four pronged cord)

need power schematics for a 20" cinema display a1038
missing the power adapter for the cinema display,need to know what the leads are for the power cord.
There is a Edison power cord that plugs into a little square box, then a 4 pronged cord plugs into that box.
I have a 24 volt power supply with the same amps, and want to hook it up to the 4 pronged plug since I don't have the little power supply box. I don't know what each lead is.
The easy answer is to buy the power supply. I bought the cinema display cheap and want to see if its worth buying the little box power supply that costs around 70$ on e-bay. If it works with the 24 volt power supply Ill go ahead and buy the little box.

Hi
If the monitor is a clear acrylic model with three feet (which it seems to be), and your computer is an original AGP Graphics/Sawtooth model, you'll need a DVI to ADC adapter.
You can identify your exact computer model from the following link:
http://docs.info.apple.com/article.html?artnum=58418
The ADC connector, which the older 20" Cinema Display uses, wasn't introduced until the later Gigabit Ethernet models. Unfortunately a newer graphics card with an ADC port won't work either, as the Sawtooth lacks an extra connector on the logic board required to power the monitor through the ADC cable.
DVI to ADC adapters are fairly expensive as they include an integral power supply to drive the monitor. It may also be worth checking your graphics card supports the resolution of the 20" display (1680 by 1050). In the worst case you may need a new graphics card (with a DVI port) and the adapter.

Need power cable for airport extreme

need power cable for airport extreme

http://www.mac-pro.com/Airport-Extreme-Base-Station-Power-Adapter
Just one of many if you enter AirPort Extreme Power Adapter in a Google search.

Need power spec for System Fan Header MSI K9N4 Ultra-F

I need the power spec for Fan Header MSI K9N4 Ultra-F motherboard
I want to use a Panoflow 2.13 Watt fan on the cpu heatsink. Will this
fan burn out the header? I don't have the board yet (it's in the mail - really)
so I can't use MSI Tech Support (I don't have the serial # yet).
thanks
Tomana

Forgot to add fan headers can take at least 6W/0.50A fans.

Need power cord for my Pavilion Entertainment PC mod #dv6753cl

Where can I get a power cord for 4 year old Pavilion Entertainment PC mod# dv6753cl?

Hi,
You need the power cord ONLY or the whole PSU ? Please try these for the whole unit:
http://www.aliexpress.com/store/100504/201061498-285200129/Original-AC-Power-Adapter-Charger-for-HP-...
http://www.sparepartswarehouse.com/HP,Pavilion,dv6700,KC424UA,Laptop,AC-Adapters.aspx
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Need power adapter for IQ846

The old power adapter for IQ846 was broken, need to buy a new one. However the replacement adapter is pricy $100. Does anyone know a cheaper option on the adapter? I don't mind 2nd hand if it works ok. thx for any info.

Hello granite2012:
Yes better then Radio Shack try E-bay.com all kinds of power adapters listed just type this in e-bay search Hp Touchsmart computers ounce e-bay brings up touchsmart computers page keep clicking pass computer pictures pages fast you will get into touchsmarts parts / services. There are alot of old adapters and computer parts listed. Best thig is you set the prise.

Needed: Power Cord For AC Adapter 90W

In Brooklyn, NY, where can I get a USA standard power cord for a 90W 20V AC Adapter for a Lenovo T400 ?
The connection on the adapter brick looks like two overlapping circles. I believe it may be what is commonly called the figure 8 connection.
Solved!
Go to Solution.

Radio Shack carries these cords.
2-prong: Enercell™ 6-Ft. AC Power Cord (Black) Model: 61-210 | Catalog #: 61-210
3-prong: Enercell™ 6-Ft. 3-Wire Detachable AC Power Cord (Black) Model: 61-205 | Catalog #: 61-205
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

Need Power Cord For Old Nomad Jukebox, PLE

I need the a.c power cord, it is a 9v cord and I can really use one, Any help ?
Please email if you have one, THANKS !!

i think that will be pretty hard to come by.
try ebay you may be able to get one.
but if you cant...
go out and get yourself a REGULATED multivoltage power supply.
you know, those battery elimators with the 8 or so interchangeable plugs.
if its not regulated you run the risk of putting too much power into your jukebox.
just make sure it has a plug that fits your jukebox and you match up the polarity then your set.
go for something with at least a amp output however.
go for more then that if you can...
good luck

I need power adaptor for a Mac Monitor

I bought a Mac monitor but it must need an adaptor to get power from my Mac Pro. HELP.

Most of the common ones are available on the Used market, for example on eBay.
If you need more guidance, please specify exactly which of the many Apple displays with this issue you are dealing with.

USA iMac model A1224 needs power cord for Belgium

Hello,
I have a US iMac Model A1224 I need a power cord that will work in Belgium. My power cord has a tag that reads: 10A 125V~ . Will any power cord work, a friend in Amsterdam has a cable with the same interface as my iMac with the European wall mont (2 round prongs)... Will this work or do I need to look at the voltage settings?
Help, Please and THANK YOU.

Newer Mac models switch voltage automatically. What does it say after the "125-"? Probably 220 or 240V. All you need in that case is a European plug or an adaptor for a US plug ( you can get them in the travel section of any department store or they are easily found in Europe) .

Car audio. amp for replacement door speakers??

im buying replacement 6x9 3 way speakers for my jeep and my main question is do i need an amp for the speakers??
Speakers are: http://www.bestbuy.com/site/Pioneer+-+6%22+x+9%22+3-Way+Car+Speakers+with+Carbon+Graphic+IMPP+Cones+...
Head Unit is: http://www.bestbuy.com/site/JVC+-+50W+x+4+MOSFET+Apple%26%23174%3B+iPod%26%23174%3B-Ready+In-Dash+CD...
HELP ME??

im going to assume that you have a grand cherokee or something along those lines. you will only get lows and a little bit of mids from the 6x9's in the doors and your highs will be from the tweeters on the top dash. you can either take the route of buying 6 1/2 adapter plates for the 6X9 slot and go with component speakers. Or you can buy 6x9's for the doors and you will need to replace the top dash speakers with tweeters. either way you will pay around the same price.
as far as the deck that is a great deck, im not a jvc fan, but many are and i do alot of installs on jvc's. let me know if i can help further. good luck!
I am a CAR Geek Squad installer tech lead, but my views that i post are my own and not that of best buy. if you like my posts give me some kudos, if you need further help contact your local Geek Squad installation bay!
Please read my posts with a smile, cause thats how I write them.Although i have a cool avatar by my name, I am just a member of the community that works for Best Buy.
***KNOW THAT I CANNOT ISSUE OFFICIAL RESPONSES AND THAT MY POSTS ARE ONLY HERE TO HELP BEFORE A OFFICAL RESPONSE IS MADE BY A MODERATOR.***

Power Requirements for Micro ATX Boards

hey all,
Are the power requirements for micro ATX boards the same as for ATX boards?
I see micro ATX power supply rated at 250, 230, even 180 Watts and i'm wondering if that can keep a system stable.

To my knowledge of Micro ATX PCB mobos + CPU and RAMs does not really tales up to the power requirements of an ATX PCB mobo + CPU and RAMs, so I think that 300watts will be a good bet.
Power AMPs for individual rails as per:
+3.3v = 20A approx.
+5v = 28A approx.
+12v = 16A approx.

AppleTV audio out to old amp with only analog audio

I'm thinking about getting the Apple TV for both video and for playing my music on my home stereo system. I currently have an old amp with only analog audio capabilities, but the new ATV looks like it only supports digital optical out, and the digital to analog converters I've looked for seem pretty expensive. How can I get the audio from my music collection (iTunes) to play wirelessly through ATV through my amp?
I currently also have an Airport Express which I use for audio, but I was thinking of selling that and just using the ATV since the ATV can essentially do the same thing as the AX with added video benefit. I've seen some threads on streaming audio from the ATV to the AX, but do I really need both? Seems like there should be another way.
I was thinking of connecting the ATV to my TV via HDMI cable for audio, and then using an analog audio out from the TV to my amp. But, if I'm correct, that would only provide me with sound coming from the TV. It wouldn't give sound out from iTunes, for example. Is that right?
Are there any other options?

Followings are my observations in audio streaming with Apple TV 3 and Airport Express through AirPlay protocol:
-- Apple TV 3 come with only digital audio outputs through HDMI and optical SPDIF outputs. If you connect optical link from the optical output to optical input of any DAC and HDMI cable from the HDMI output to HDMI input on TV set, audio output will be transmitted through both digital outputs. Thus is is not necessary to turn on TV set unless visual feedback is required. There is no audio analog line output for Apple TV 3.
-- AirportExpress come with single combo mini jack (digital + analog) for audio output regardless of old/new models. You can connect either digital optical link (with Mini/Toslink adaptor) to digital input of DAC or analog line cable (inferior) to analog line input of amplifier. When analog line is used, digital-to-analog conversion is done by DAC built into AirportExpress for which do not expect quality is as good as most external DAC models. What do you expect from a single-chip DAC implementation vs standalone DAC models cost few thousand dollars ? Moreover analog line is susceptible to interference more than digital line.
So the decision to use Apple TV or AirportExpress, analog or digital transmission for audio streaming depends on whether you need WiFi base station features of AirportExpress to establish wireless network and quality of your audio system to justify all-digital audio transmission. Followings are what I use in audio streaming from iMac/iPad mini /iPhone 5 to audio system in living room. Quality of audio output is comparable with Sonos Zone Player as audio source.
Apple AirPort Extreme wireless base station (802.11n, 5GHz)
Apple TV 3 (firmware 5.1.1, Xtreme HD Toslink optical cable)
Antelope Audio Zodiac DAC
Bel Canto power amplifier
Bowers & Wilkins 683 speakers
Yamaha YST-SW215 subwoofer

I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

Are you in the US? Order one from here: http://store.apple.com/us/browse/home/shop_mac/mac_accessories/power?mco=MTM3NjU xNDg
Or check out Best Buy.

Need power amp for compactDAQ analog out

Similar Messages

Maybe you are looking for