Need Power Connector Cable for ATI Radeon X1900 XT

I need the 6pin power connector/cable for my ATI Radeon X1900 XT to work with my Mac Pro.
I can't use the card as I lost the small cable pior to installation and now I can't find one anywhere.
It is the 6 pin cable that connects into the Radeon X1900 XT and the other end into the Mac Pro motherboard.
Can someone help me?
Thank you

Worst service ever at the local(Canada) Montreal/Laval Apple Store........''go ask ATI or call Apple, etc....''
that was helpfull
I go to Apple because it is an Apple card and I get service like I was asking for a PC.
Typical of Apple, you buy their stuff then they turn your back on you in case that you need some help.

Similar Messages

Replacement power cable for ATI Radeon 5770?

I'm shopping around for a replacement graphics card for my Mac Pro and I've found several Radeon 5770s that don't have the PCIe power cable included.
Does anyone know what sort of cable they use and if replacements can be purchased?

yes it can be purchased but first, you are shopping for an Apple version, right?
http://store.apple.com/us/product/MC742ZM/A
http://www.amazon.com/Apple-ATI-Radeon-5770-MC742ZM/dp/B003Z6QH6M/
http://eshop.macsales.com/item/Apple/6615718/
OWC shows the cable, they also sell separately (maybe why they charge more?)
Amazon had customer photos but not showing one.
I was under the impression that Apple would/was including the cable.

What is a good replacement for the ATI Radeon X1900 XT on a late 2007 Mac Pro

I recently took my late 2007 Mac Pro to the Apple Store because it was running quite loud. They diagnosed the problem as the fan on the ATI Radeon x1900 XT video card. Whie the card works fine otherwise, I was thinking of replacing it. I noticed some online recommendations that I need to upgrade to perhaps the Radeo HD 4870 if I want to install FCP X on this machine. I do use the Mac Pro for video editing, but haven't switched yet to FCP X. Anyone have a suggestion on a replcement video card that will work both on this machine and will be compatible with FCP X.
Thanks for any advice.

<http://store.apple.com/us/product/MC742ZM/A/ati-radeon-hd-5770-graphics-upgrade- kit-for-mac-pro-(mid-2010)>

Upgrade MacPro1,1 with ATI Radeon X1900 XT 512 MB and Open GL 1.7.7. to recommended system requirements for heli simulator: OpenGL Version 2.1 compatible 3D-graphics card from NVIDIA or ATI with 512MB.

I want to install a helicopter simulator into my MacPro1,1 with ATI Radeon X1900 XT 512 MB and Open GL 1.7.7. Recommended system requirements for the heli simulator are: OpenGL Version 2.1 compatible 3D-graphics card from NVIDIA or ATI with 512MB (at least as fast as NVIDIA 8600, 9400 or ATI Radeon HD 2400). Is there such a graphics card available that will work in my Mac Pro?

Are you really still running 10.6.3? you will need 10.6.5+ so do that and make a clone.
ATI 5770 from Apple Store - like 1000s of others have done and in the comments section on the store page.

ATI Radeon X1900 worth it for only FCP and Color?

Hello,
I've been looking around these posts for a while and I can't seem to find this specific answer, so I apologize if my question has been asked already.
I am looking to purchase a MacPro tower. I don't use Motion. I don't play video games. I don't need 8 zillion giant monitors. I intend to use the computer mainly for Final Cut Pro 6.0 and probably a fair amount of Color as well.
With this being the case, what are the benefits of the
ATI Radeon X1900 XT 512MB Graphics Card, over the
NVIDIA GeForce 7300 GT 256MB Graphics Card? Is it really worth the money? I've seen some posts that say you won't see a difference in FCP, but is this also true for Color? And if so, what exactly will the difference be?
Thanks,

Here's what they said at the Color board...
With anything less than an ATI x1900...you may experience issues such as lack of realtime playback, missing support for 10-bit images and 2K frame sizes, no float support for your grade settings.
For this version of Color, ATI is the way to go. I wouldn't go so far as to say an Nvidia card gives you a crippled version of the program, but it's close.
http://discussions.apple.com/thread.jspa?messageID=4611284&#4611284
http://discussions.apple.com/thread.jspa?messageID=4672792&#4672792
http://discussions.apple.com/thread.jspa?messageID=4620097&#4620097

ATI Radeon X1900 XT driver for MacPro

I put an ATI Radeon X1900 XT for MacPro in my 2 x 3 GHz MacPro. It displays only 1280 x 800 on my 30" Cinema. Do I need to install a driver, and if so, where to get the driver since card did not come with CD and AMD site has not posted a driver?
2 x 3 GHz MacPro Mac OS X (10.4.8)

zspike --
You don't need drivers -- they're built in to the OS. However, it would be nice to use the ATi displays panel, so you can turn on various app-specific speed settings and features like full-screen antialiasing.
Now, version 4.5.9 of ATi Displays is a Universal Binary, but ATi in their infinite wisdom have made it so that it WILL NOT install on a Mac Pro, only a G5.
But there's a way around this:
http://forum.macbidouille.com/index.php?showtopic=199963
Have a look at post No. 8. Simply put the displays.app in your /Applications/Utilities folder, and run it from there. Runs no problem. I couldn't get the Prefs Pane to work, but all that does is launch the Displays.app
Have fun!

ATI Radeon X1900 XT only for MacPro?

I Just noticed this this morning at Apple's Online Store ( US )
"ATI Radeon X1900 XT Graphics Upgrade Kit US$ 399.00"
I wonder if this will work in the G5 with Dual Cores ( and Quad ) PCIe ?

Ok thanks Jewell, What a Bugger eh?
X800XT for PCI-X G5's and ATI Radeon X1900 XT for MacPro's and nothing for the PCI-E last generation G5's! (unless you BTO).
I have seen your posts here about the lack of video card upgrades for the Quad, and I feel for you ... it's got to be exasperating !!
It will not unfortunately. Its to do with the way
video cards are recognised by the host system and the
x1900 is for MacPro only.
However.
Joe Schorr has confirmed in these forums that ATI
will be releasing a dual-core G5 edition of the x1900
(?) card which would finally make this Apple's first
video upgrade card since the dual-core G5 (quads)
were launched in October 05. Way to go Apple...
I read your repost of it.
-Robert

I need to buy PCIe power internal cable for Pavillion 6

I need to buy PCIe power internal cable for Pavillion 6. The 1394 Rosewill card did not come with an internal cable that I I can use to power the card. What do I call this cable? Thx
This question was solved.
View Solution.

Hi,
It does not need power cable. It use power from its pins:
http://www.rosewill.com/products/22/150/441/0000/series.htm
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Need newest driver for ATI Radeon 3650 - Satellite Pro A300-1NT

Hello everyone,
I am looking for the newest drivers for ATI Radeon HD 3650 onboard Satelite Pro A300-1NT.
During playing Transformers: Revenge of the Fallen (2009) game by Beenox Inc ..... I get pixelized squares on tthe screen (instead of dust) and eventually blue screen.
I am using Windows XP Pro
I looked for drivers on *Toshiba website* and the only I found are:
12/01/09 Display Driver ATI Windows XP 8.477
*Game support* suggests upgrading driver for a newer one.
*Ati manufacturer support* have driver for ATI Radeon 8650 but not compatibile with Mobile Solution - and when asked for Mobile Ati support I got the ansfer:
+AMD Customer Care for ATI products does not provide direct technical support for laptops/notebooks at this current time (telephone or email). If you require direct technical support please contact the system manufacturer of your laptop/notebook.+
+ [http://support.amd.com/us/kbarticles/Pages/737-28041SupportforATIMobility.aspx|http://support.amd.com/us/kbarticles/Pages/737-28041SupportforATIMobility.aspx] +
I ask then are there newest drivers for Windows XP

Hi
I think you have already answered this question by yourself...
As you wrote you can get all drivers on the Toshiba website and if there isnt a newer driver available you can nothing more I think. Satellite A300 isnt a high performance gaming notebook so I think display drivers are not so important.
The only way to get a newer version is that you search on external websites. Maybe you can get the desktop driver working due some modifications I dont know but be really careful!!! Other drivers dont have an overheat protection and you could destroy the graphic chip. Be really careful what you do.
Alternative you can search on the Toshiba website for other notebook models with ATI card too. Maybe there you can get a newer version

ATI Radeon X1900 XT upgrade issue

Hey guys, hopefully someone here can help me with my problem.
I recently bought one of the 8 core mac pros with the nvidia 7300GT cards in them. I later decided to upgrade to the ATI Radeon X1900 XT 512MB card. The apple website said it was going to take 10 - 12 weeks for delivery, so imagine my surprise when I got it 2 days after I placed my order.
I didn't have any problems with the removal of my nvidia cards or with the installation of the ATI card.
I started up my computer, and up popped the Expansion Slot Utility program which told me that I needed to choose a different profile so as to maximize my card's speed. I think it was set on the 4th option before (x8, x8, x4, x4). The program recommended that I try option 1 or 2, both of which were x16 for slot 1 which is the slot i had plugged my ATI into and were the only two options that had a green bubble next to them.
So I chose option 1 (x16, x1, x1, x8) and clicked on the "save and restart" button. Computer shut down... restarted...
Suddenly, the graphics card fan was blowing at full speed and my screen was blank. I waited for a minute, and then had to use the power button to shut it down.
I tried a couple of things from there.
First I put the ATI card in slot 2, and later 3. The computer started up without any problems and with no fan noise. When the Expansion Slot Utility popped up again, I choose option 2 (x16, x1, x4, x4) and put the ATI back into slot 1. I got the same problem of the screen staying black and the ATI fan going crazy.
So as not to constantly have to change the ATI card every time i wanted to change a setting under the Expansion Slot Utility, I kept the ATI in slot 1 and installed the nvidia in slot 4.
What I basically found was that the ATI did not work under options 1 and 2 in the Expansion Slot Utility where it has a x16 lane, but works perfectly fine with options 3 and 4 where it is limited to the x8 lane.
So I'm not sure where to go from here. Considering that I bought this computer two months ago with nvidia cards in it, does it mean I have to get a particular driver for the ATI to work on x16 lane? Is there a significant performance drop if the card is set to x8 lane?
Any help would be appreciated.
OKS

Yup, I had them connected. Just to be safe I tried plugging the cable into the other auxiliary power connector so as to see if the problem was with one of them. Unfortunately I got the same problem.
I also noticed that when I go to the Expansion Slot Utility program after I start the computer in x16 mode, and when I have the screen plugged into the nvidia card, it only shows the nvidia card in the program. The ATI is missing. Even though the card's fan is blowing like crazy.
In other words, when i choose to give the ATI x16 lane in the Expansion Slot Utility program it vanishes from the program upon restarting the computer under that profile. I also checked under the system profiler, and the ATI card is gone there as well.
I'm not really used to writing about computer issues, so if I'm unclear about certain points, please don't hesitate to let me know.
OKS

Nvidia GeForce 7300 GT and ATI Radeon X1900 XT

I have a Mac Pro 2,1 running 10.6.1 and BootCamp.
I had a Nvidia GeForce 7300 GT video card in it and it ran well under BootCamp.
I installed a ATI Radeon X1900 XT.
Under BootCamp the 2 cards seem incompatible, with an error message that the driver on the Nvidia card has been disables due to an incompatibility with the other card.
Is there a solution for this?
If I wanted 2 cards inside would they both need to be the ATI's or Nvidia's?
Thanks

Hi I would maybe get a Apple Upgrade Kit the GT 120 is 512MB's & dose not use all 16 lanes as it like to make you think & will work on 2006 Mac Pro's at $149.00 I would say if you just want more displays get two & eBay your old cards. Please know if you game you will want more power but if only for more displays this 1 slot card is great.
NVIDIA GeForce GT 120 Graphics Upgrade Kit for Mac Pro (early 2009)
View all Questions
It as well as the much better 4870 both work with the Mac Pro 1,1 & 2,1
NVIDIA GeForce GT 120 Graphics Upgrade Kit for Mac Pro (early 2009)
The NVIDIA GeForce GT 120 includes 512MB of GDDR3 memory, uses the PCI Express 2.0 interface, and includes one Mini DisplayPort and one dual-link DVI port.
Learn more Questions & Answers
2 Questions + 2 Answers
Based on 11 reviews
Write a review
$149.00
Ships: Within 24hrs
Free Shipping
Overview
The NVIDIA GeForce GT 120 with 512 MB of GDDR3 memory delivers excellent all-around performance whether your playing games or dealing with creative and scientific applications. With up to four NVIDIA GeForce GT 120 graphics cards installed, a Mac Pro can support up to eight displays simultaneously.
NVIDIA GeForce GT 120 includes two video ports: one Mini DisplayPort and one dual-link DVI port. This allows you to connect both the 24-inch Apple LED Cinema Display or another Mini DisplayPort-based display, and a DVI-based display such as the 30-inch Apple Cinema HD Display. Display adapters are available to connect VGA displays.
Good Luck man
Thomas

Alternatives to ATI Radeon X1900 XT 512 MB

Hi Guys,
I'm pretty sure my ATI Radeon X1900 XT 512 MB graphics card has failed...
I run MacPro1,1 (2008) Dual-Core Intel Xeon with 2 x 23-inch DVI Apple Cinema Displays. Tonight only one of the screens would wake from sleep - the screen in port 2.
I've tried...
1. Swapping the DVI cables, this results in the non waking screen waking and the waking screen, not waking.
2. Tried running just one screen off DVI port 1 and nothing happened, blank screen but power light on.
3. Tried running same screen off DVI port 2 and still nothing happened, blank screen but power light on.
To re-cap - None of the DVI ports work on their own and only Port 2 works when both screens are plugged in.
So... is there any other tests or checks I can do to confirm 100% it's a faulty card? I've unplugged and done the SMC reset.
Secone part to this - if the card is shot can anyone recommend an upgrade to the ATI Radeon X1900 XT 512 MB?
Thanks
Pete

You could use a Mini-DisplayPort to DVI adaptor on one of the ports, I would think. Otherwise, you don't have two many choices. You might look for a used ATI 4870, Mac Edition model. It's performance will be similar to the 5770 since the 2006 MP only has PCI-e 1.0 slots so the 5770 can't take advantage of it's capabilities if installed in a PCI-e 2.0 slot.
Other cards that will work include the older Nvidia 8800 GT for Mac. You must be sure with these other cards that you look for the ones that are compatible with a Mac Pro. These were the ones made specifically for Apple. Non-Apple cards will not work unless you have the hardware, ability, and knowledge to re-flash ROMs.

ATI Radeon X1900 XT 512 MB graphics card has failed?

I think my ATI Radeon X1900 XT 512 MB graphics card has failed...
This is a MacPro 1,1 (2006). We're on our yacht in a French territory, South Pacific, so local support is non-obtainium. I would appreciate any advice on how I can confirm my graphics card is dead.
I have only 23" Apple Cinema Display for testing. The display works great on MBP, so that end is good.
The MacPro seems to boot normally - AFAIK based on startup sounds, fan, RAM LED diagnostic lights.
Suggestions?

Case A) the screen goes blank at the login screen
invoke Safe Mode (hold down the Shift key at Startup).
This performs a five minutes or so Disk Utility ( Repair Disk) on the boot drive, then demands your userId and password, even if you normally auto-login.
Safe Mode only loads the absolutely essential Drivers, and the graphics drivers are not considered essential. So screen re-draw may be slow, but you can check your email, surf a little, do many operations that do not require graphics acceleration.
Edit movies? Probably not.
Case B) your screen completely blank
If the power-on light flashes in a pattern, that indicates not enough good RAM to start up.
If no power light flashing, you need some function you can invoke that will show a non-graphics result.
The Caps Lock light on the keyboard is under software Control. If it works, at least the SMC controller that talks to the keyboard is working.
Holding down Control while pressing the Eject key on the keyboard brings up this familiar dialog box, whether you can see it or not:
any key except:
R for Restart;
S for Sleep;
Esc for cancel;
and return for the default Shut Down
should cause the System Beep sound. S should Sleep it, and the power light should shortly indicate that it is sleeping. Any key will then wake it up.

Crash with ATI Radeon X1900 XT and second HD display (DVI) ?

hi ! i have a realy tough one for you guys : since 3-4 days i've been getting this realy strange (and scary!) kernal panic screen / crashes / freeze with my macpro dual 2.66 with ati radeon X1900 xt.
the crashes keep coming while doing extensive work (video converting, renders) or just letting the macpro running doing nothing much all night long...
now this is what i found for now : if i disconect my 2nd display (samsung syncmaster 2493hm HD in DVI 1080p) it seem to be stable. when i reconnect it sometime it can run again with this 2nd display for a while but when i leave a render all night long the next morning it will be frozen, nothing on screen (all black).
after rebooting it get this crash report from the system :
Maccinachheeke-pabcapk cat0etiabies 0x00000000000000000000006:
6 ereerr--i oporgingngnkbeaachineck Maehik ne-a0h0h ck stat00t000000000 r0es0
reteattartPvvl Ili maaliceicdn mchk aiog eproMh
rekroi-MCpor reorrosg-:
porttMCrSTregt(i_MC 0xSTATUS(er40_S x20210(0x0nv0TalU00xx002in000iS10000002405)100l00U I0nva0M 0xS
IS(0x0A30:_M0U2(00ATU5S(2xx00200TA00000x00400000IAinv2li00lC
20IAA00200_inv0xid
0IA3: 3_d0000AT0)000000d)0000n00a00d000nA0v0l0d
I3S22_v4USi3SIA0411): 0400 0x0U0000020000 00100 00vl00
0 I0A3011CivAA32_SM_441SxTUTb0004100)000vb01001iA 00led 0I cva00 i e r cI:S(0xe0 1 ):(0 : 041e5)b x000b 800de:fix 4arrld
Mo MAA e8atr code inf 00: 0 0x00 St
00s00ode
spSccifsic codr
texr ccorre02sor:
0 8O4x0
r erder in orrmt n ded0000: 0x1rp0000Satus bitts:
b 0ts:4ssor PMroexce Chtsscorrupt, tconad:
e0x3re1cor,rtr epo:bl ed err: E0)roncirters0: 0
8ernc0ro,rrR2: 0xected error
CR3: 0x00e7a000, CR4: 0x000006e0
EAX: 0x24f9bed8, EBX: 0x1a6f198a, ECX: 0x1a6f198a, EDX: 0x004bc870
ESP: 0x24f9bebc, EBP: 0x24f9bf08, ESI: 0x00001e27, EDI: 0x035e1718
EFL: 0x00000006, EIP: 0x0019e9c0
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x439d58 : 0x128d0d (0x3cc65c 0x439d7c 0x131f95 0x0)
0x439d98 : 0x1a42cb (0x3d27fc 0x0 0x35e1718 0x12)
0x439f58 : 0x19c103 (0x439f70 0x0 0x0 0x0)
0x24f9bf08 : 0x135888 (0x1a6f164f 0x35e3d40 0x3f91084 0x2)
0x24f9bf58 : 0x1359c9 (0x13d8a2 0x0 0x0 0x19e23a)
0x24f9bf78 : 0x13da53 (0x13d8a2 0x0 0x0 0x0)
0x24f9bfc8 : 0x19b21c (0x0 0x0 0x19e0b5 0x4ebf4c0) Backtrace terminated-invalid frame pointer 0x0
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
Model: MacPro1,1, BootROM MP11.005C.B04, 4 processors, Dual-Core Intel Xeon, 2.66 GHz, 2 GB
Graphics: ATI Radeon X1900 XT, ATY,RadeonX1900, PCIe, 512 MB
Memory Module: DIMM Riser A/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser A/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (4.170.13.1)
Network Service: AirPort, AirPort, en2
PCI Card: ATY,RadeonX1900, Display, Slot-1
Serial ATA Device: ST3250820AS P, 232.89 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: USB2.0 Hub, Up to 480 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: USB RECEIVER, Logitech, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
FireWire Device: built-in_hub, unknown_value, Unknown
FireWire Device: GSA-5163D Super Multi DVD Rewriter, HL-DT-ST, Up to 400 Mb/sec
FireWire Device: My Book Device, WD, Up to 800 Mb/sec
here's my complete config if it can help :
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 2 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B04
SMC Version: 1.7f8
ATI Radeon X1900 XT:
Chipset Model: ATY,RadeonX1900
Type: Display
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x7249
Revision ID: 0x0000
ROM Revision: 113-A52027-140
EFI Driver Version: 01.00.140
Displays:
SyncMaster:
Resolution: 1920 x 1200 @ 60 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Television: Yes
S/M 955SL:
Resolution: 1280 x 1024 @ 75 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
anyone ever see this problem ? at 1st it seem to be related to my ATI card... but i'm no expert so if anyone can understand part of the crash log let me know ! thanx !!
also forget to say : did all the full apple hardware test + tech tool pro test (app that come with apple care) and nothing was wrong, all ok.
+
francis.t
montreal
Message was edited by: francis.t

Are you really still running 10.6.3? you will need 10.6.5+ so do that and make a clone.
ATI 5770 from Apple Store - like 1000s of others have done and in the comments section on the store page.

NVIDIA GeForce 120 or ATI Radeon X1900... which is better?

Hi-
I currently have the ATI Radeon X1900 graphics card installed in my Mac Pro 2.26 Nehalem. I'm not having any issue's with the card except that the fans turn On quite frequently, and they're a little loud.
I'm not using it for any games, etc... My primary use is with Pro Tools (a music DAW application).
The ATI Radeon X1900 is running a Apple 30" display and a Sony Bravia 46" LCD.
If I replaced the ATI Radeon X1900 with a NVIDIA GeForce 120, would I be asking for trouble?
Thanks in advance.

If I replaced the ATI Radeon X1900 with a NVIDIA GeForce 120, would I be asking for trouble?
If your Mac Pro came with ATI Radeon X1900, then it needs a card with EFI-32 firmware. The NVIDIA GeForce 120 has EFI-64 firmware, and won't work in the pre 2008 Mac Pro. The only upgrade for early Mac Pros is the ATI Radeon HD 4870
<http://store.apple.com/us/product/MB999ZM/A?fnode=MTY1NDA5OQ&mco=MTA4MzU2NTc>
(Despite what Apple says, it will work in any Mac Pro.)
You will need a Mini DisplayPort adapter for the second display,

Need Power Connector Cable for ATI Radeon X1900 XT

Similar Messages

Maybe you are looking for