Need power spec for System Fan Header MSI K9N4 Ultra-F

I need the power spec for Fan Header MSI K9N4 Ultra-F motherboard
I want to use a Panoflow 2.13 Watt fan on the cpu heatsink. Will this
fan burn out the header? I don't have the board yet (it's in the mail - really)
so I can't use MSI Tech Support (I don't have the serial # yet).
thanks
Tomana

   Forgot to add fan headers can take at least 6W/0.50A fans.

Similar Messages

  • Power specs for a c360

    I'm putting a C360 in Terremark facility and need to now how much power it consumes.  Where are the power specs for a c360?

    C360 - hardware specs --->
    MTBF: 78,800 hours
    Fan Exhaust Volume: 43.5cfm
    Ambient Noise: 68.9db
    System Heat/Power (watts): 260.4
    Total Current (amps): 1.25
    Air Temp Rise (F): 19.3
    Weight (lbs): 49
    Hope this helps!
    -Robert
    (*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)

  • Need power schematics for a 20" cinema display a1038 (four pronged cord)

    need power schematics for a 20" cinema display a1038
    missing the power adapter for the cinema display,need to know what the leads are for the power cord.
    There is a Edison power cord that plugs into a little square box, then a 4 pronged cord plugs into that box.
    I have a 24 volt power supply with the same amps, and want to hook it up to the 4 pronged plug since I don't have the little power supply box. I don't know what each lead is.
    The easy answer is to buy the power supply. I bought the cinema display cheap and want to see if its worth buying the little box power supply that costs around 70$ on e-bay. If it works with the 24 volt power supply Ill go ahead and buy the little box.

    Hi
    If the monitor is a clear acrylic model with three feet (which it seems to be), and your computer is an original AGP Graphics/Sawtooth model, you'll need a DVI to ADC adapter.
    You can identify your exact computer model from the following link:
    http://docs.info.apple.com/article.html?artnum=58418
    The ADC connector, which the older 20" Cinema Display uses, wasn't introduced until the later Gigabit Ethernet models. Unfortunately a newer graphics card with an ADC port won't work either, as the Sawtooth lacks an extra connector on the logic board required to power the monitor through the ADC cable.
    DVI to ADC adapters are fairly expensive as they include an integral power supply to drive the monitor. It may also be worth checking your graphics card supports the resolution of the 20" display (1680 by 1050). In the worst case you may need a new graphics card (with a DVI port) and the adapter.

  • Need power cable for airport extreme

    need power cable for airport extreme

    http://www.mac-pro.com/Airport-Extreme-Base-Station-Power-Adapter
    Just one of many if you enter AirPort Extreme Power Adapter in a Google search.

  • Problem with MSI K9N4 Ultra-F

    Here's my configuration:
    DualCore AMD Athlon 64 X2, 2100 MHz (10.5 x 200) 4000+
    MSI K9N4 Ultra-F (MS-7310)
    2XKingston (1 GB DDR2-533 DDR2 SDRAM)
    Using BIOS settings I cannot overclock my CPU for a single MHz. When tried, I had to clear CMOS. Also, I tried to use ntune utilities for overclocking, but when I enter any of those utilities, my computer freezes. That started when I flashed BIOS to a newest version(before overclocking was possible). Now I can't roll it back. Is there any chance to flash previous BIOS through Windows(I'm not familiar with flashing from floppy).
    What should I do?

    Stop updating the BIOS.
    Your memory preventing the OC.

  • Max Amps for Mobo Fan Header?

    What is the max amps a cpu/case fan can pull from a Motherboard fan connector? .5 amps? .8 amps? 1 amp? more? I have 5 fan connectors on my motherboard. Can they all pull 1 amp fans?
    MSI 890FXA-70
    Phenom II X6 1055t
    850watt Pro Corsair
    4 x 2GB 1600Mhz OCZ
    Dual HD5830 1GB
    50GB OCZ vertex 2
    3 x 320GB Samsung F4 RAID-0
    LG Blu-ray/DVD-RW

    tho not same mobo...
    i did try one of my 120mm 3500 rpm 1.67amps Delta fans on my main cpu fan header...
    works solid. no lack of power. worked great with speed fan for noise control.
    however, currently in different layout and i got a fan controller anyways cuz i need it for my
    case fans.
    also, at same time while using the 3500, was using 2x 3pins off the mobo at 0.16amps each
    i'd say be safe and don't pull then more 1.0 amps as they all say... but
    i saw at least one review on newegg where the guy uses it for his cpu fan main fan straight
    off mobo 24/7 and im guessing he's not roasting - mine din't  and i did touch the connector after immediately after
    shutdown to see if it would be overly hot to the touch...
    and it was warm... but not toasty.
    i wasn't going to try to run two of the 3500rpm deltas tho... i do have splitters, and is
    still tempting to date, but burnt plastic smell kinda hard to remove from room for longer period of time. hah. 
    so... if you wanted strong push-pull directly on the mobo cpu fan connector, can use 2x 2500rpm deltas fans (only 0.8amps each which
    totals slightly less than one 3500 rpm fan)
    but then again... you gotta check it for temp to be sure no toast for your mobo.
    Nothing wrong with quick test... shouldn't hurt nothing... just dont touch the mobo while it's on.
    If you have IR thermometer gun... best use... wish i had got one on sale other day for 18 bux shipped!
    FANS ARE FUN! 

  • I need power amp for my i pad

    I want Power amp for my i pad. IF any one know please let me know
    Thanks
    sureshkumar

    If you are for better sound from your iPad, there are a myriad of portable devices that your iPad can be connected to to increase the iPad's sound levels.
    Search for iPad speakers, speaker systems, or audio for iPad.
    If you want to connect your iPad's audio to some sort of stereo or surround sound power amplifier that has to be connected to a larger pair of audio speakers, any on the market will work. You need to purchase a cable that connects to the iPad's headphone jack that splits the stereo signal to left and right channels that can be plugged into the left and right channels of the audio amplifier.

  • I need to replace my system FAN

    Okey this site is really confusing, all i need to know is where do i go to get my system fan replaced ??
    i currently live in Manila (Philipines). anyone ? please ?

    Here is a link to the Service Center locations in the Phillippines, including Manila. The HP Service Canter in Manila is where you need to go.
    Use the link above and click on  Manila in the map for directions and more information.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Need power cord for my Pavilion Entertainm​ent PC mod #dv6753cl

    Where can I get a power cord for 4 year old Pavilion Entertainment PC mod# dv6753cl?

    Hi,
    You need the power cord ONLY or the whole PSU ? Please try these for the whole unit:
      http://www.aliexpress.com/store/100504/201061498-2​85200129/Original-AC-Power-Adapter-Charger-for-HP-​...
      http://www.sparepartswarehouse.com/HP,Pavilion,dv6​700,KC424UA,Laptop,AC-Adapters.aspx
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Need Administartor Password for - System Disable Key: is 62187718

    Need Administartor Password for CQ62 215DX - System Disable Key: is 62187718

    Hi,            Use the below code to reset 73885338 Or generate one from the below link  http://bios-pw.org/ 1. Use the unlock code you generated to enter the BIOS
    2. Disable all passwords that are enabled in the BIOS's security menu.
    3. If asked for current password - type the unlock code
    4. For new password, just press ENTER key
    5. Repeat the same for verify password column.

  • Power Spec For the WS-C6509-E Switch

    I just need to know where to look for the power requirements for the WS-C6509-E Switch.

    Hi,
    Here you go:
    http://www.cisco.com/en/US/products/hw/switches/ps708/prod_bulletin0900aecd8017a5e7.html
    "• The 6- and 9-slot chassis are designed to scale beyond 4000W power supply configurations. In the future they will support 6000W power supplies.
    • The minimum power supply required is 2500W or higher (AC or DC) for the 6- and 9-slot chassis."
    HTH,
    Bobby
    *Please rate helpful posts

  • Need power adapter for IQ846

    The old power adapter for IQ846 was broken, need to buy a new one. However the replacement adapter is pricy $100. Does anyone know a cheaper option on the adapter? I don't mind 2nd hand if it works ok. thx for any info.

    Hello granite2012:
               Yes better then Radio Shack try E-bay.com all kinds of power adapters listed just type this in  e-bay search Hp Touchsmart computers ounce e-bay brings up touchsmart computers page keep clicking pass computer pictures pages fast you will get into touchsmarts parts / services. There are alot of old adapters and computer parts listed. Best thig is you set the prise.

  • Need power amp for compactDAQ analog out

    I am using the CompactDAQ in a controls application and need a recommendation for an amplifier that will enable me to provide power proportional to the Analog Out signal, which has voltage but no notable current.  I know the recommendation would be application dependent, but I am hoping for something rather generic for powering motors, heaters, pumps, etc.

    You may also find it helpful to search the GlobalSpec in the Affiliated Product Advisor- it's just a good resource when looking for additional equipment to go with your NI hardware.  Happy shopping!
    aNItaB
    Applications Engineer
    National Instruments
    Digital Multimeters

  • Needed: Power Cord For AC Adapter 90W

    In Brooklyn, NY, where can I get a USA standard power cord for a 90W 20V AC Adapter for a Lenovo T400 ?
    The connection on the adapter brick looks like two overlapping circles.    I believe it may be what is commonly called the figure 8 connection.
    Solved!
    Go to Solution.

    Radio Shack carries these cords.
     2-prong: Enercell™ 6-Ft. AC Power Cord (Black) Model: 61-210 | Catalog #: 61-210
    3-prong: Enercell™ 6-Ft. 3-Wire Detachable AC Power Cord (Black) Model: 61-205 | Catalog #: 61-205
    Cheers... Dorian Hausman
    X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

  • Western Digital 1 TB + MSI K9N4 Ultra-F?

    hello,
    today I added a Western Digital SATA II harddisk to my MSI K9N4 Mainboard. It is connected with the secondary channel. A Seagate 260 GB is on the first channel.
    The problem is that the new disk don´t appears in the Windows explorer while it apears in the device manager.
    Do you know if a disk of the size will work with the mainboard?
    cheers, Marcus

    thank you guys for your replys!
    I hadn´t formated it! now it is running 
    cheers, marcus

Maybe you are looking for

  • Why won't my computer recognise my sd card?

    I used my sd card this morning but 2 hours later my computer would not recognise it.  i have tried 2 different cards.I have a hp  Desktop p6203w.

  • Hai.. i want to know, why my debit card have be deducted?

    Hai.. i want to know, why payment with my debit card have be deducted?

  • Solution need for multiple xml and Flowlist component

    Hi! I am using multiple xml and AFComponents AS3 Flowlist component. I am having an issue with the thumbnails in the Flowlist component after about 20 or so user clicks, the images no longer appear, yet the threaded data is still there. http://www.li

  • Problem when trying to start Weblogic server

    Hi, I have a problem when in was trying to start the weblogic server from the Weblogic Console.It Loads all the necessary files and finally it comes out giving an error "Server start message not received in allotted time, server process killed.". But

  • Struts reusable forms

    First, I am new to struts.           I would like to use a form with different actions. However, depending on the           action the required field(s) would be different. Is there an idiom( or           pattern) used for this type of problem.