Need product Code For AC Adaptor (Satellite Pro A100-722)
I am looking for the product number for the AC adaptor of the model below so I can purchase the correct replacement AC adaptor.
Satellite Pro A100-722
Part Number: PSAAPE-00D006EN
Help would be great.
Thanks R2D2
i was getting a different ac adaptor (*PA3468E*) on the Toshiba website for my laptop which was wrong as it had a 19v supply and my laptop only takes 15v.
On the Topaz Support (Official Toshiba Parts Supplier) website it was refering me to one with the product code *PA2521E-2AC3* I gather there is no difference between this and the one you have suggested *PA2521U/E-2ACA*.
Thanks Again.
Similar Messages
-
Need Product Recovery for Satelite Pro L100
I cannot find the product recovery of my Toshiba Satellite Pro L100.
How can I obtain a replacement?
I'd appreciate your help.
BertYou have two ways to order recovery media for your notebook model. Either order it by nearest authorized service provider or order it directly under http://www.backupmedia.toshiba.eu
Bye -
I have a product code for my photoshop c6 and i used a different account to register this software. how can i use this product that i have with my new account that i just made?
please advise
I dont have the serial number so yeah
i have a product codeContact Adobe Customer Service directly by phone or web chat (they don't do email). They don't do email. If you can provide proof of purchase to their satisfaction, they may be able to help you.
These are user forums, so you're not addressing Adobe here. We can't help you with this type of issue. -
I Need Java code for following Algorithm
* I Need Java code for following algorithm. Kindly any one help.
1. Read the contents (ideas and its corresponding scores) from two files named as 'a' and 'b'.
2. Stored the file 'a' contents in array a[].
3. Stored the file 'b' contents in array b[].
4. compare both files like
if(a.equals(b[j])
Writing the common idea and add the score from file 'a' and 'b'.
else
write the uncommon idea and its score..
For example :
Form Agents.txt
action,65
architecture,85
eco-,15
essay,30
form,85
form,85
link,40
tangent,25
Form Agents1.txt
Black holes,69
essay,78
Herewith i have above mentioned two files named as Form Agents and Form Agents1.
Form Agents has eight fields
Form Agents1 has two fields
--> 'essay' is common in two files, so store the idea 'essay' and add the score from Form Agents score is '30' and Form Agents1 has 78 (essay 108).
Finally it stores idea in another file with uncommon fields also.
Please help us.We have tried with following code.
But we cant add the scores.
For Example:
Form Agents.txt --> has "essay,30"
Form Agents1.txt --> has "essay,78"
Result is: essay,108
Finally it stores idea in another file with uncommon fields also.
So Any one pls correct the following code.
try
DataOutputStream o1=new DataOutputStream(new
FileOutputStream("C:\\Interfaces\\interfaces\\temp\\BlackBoard\\My Design
World\\Project\\Material\\art\\System Agents\\Form Agents\\CandidateResponses\\Form
Agents.txt"));
//Reading the contents of the files
BufferedReader br= new BufferedReader(new InputStreamReader(new
FileInputStream("C:\\Interfaces\\interfaces\\temp\\BlackBoard\\My Design
World\\Project\\Material\\art\\System Agents\\Form Agents\\Ideological\\Form
Agents.txt")));
BufferedReader br1= new BufferedReader(new InputStreamReader(new
FileInputStream("C:\\Interfaces\\interfaces\\temp\\BlackBoard\\My Design
World\\Project\\Material\\art\\System Agents\\Form Agents\\Related\\Form
Agents.txt")));
while((s=br.readLine())!=null)
s1+=s+"\n";
while((s2=br1.readLine())!=null)
s3+=s2+"\n";
int numTokens = 0;
StringTokenizer st = new StringTokenizer(s1);
String[] a = new String[10000];
String[] br_n=new String[10000];
int i=0;
while (st.hasMoreTokens())
s2 = st.nextToken();
a=s2.substring(0,s2.length()-3);
s6=s2.substring(s2.length()-2);
br_n[i]=s6;
i++;
numTokens++;
int numTokens1 = 0;
StringTokenizer st1 = new StringTokenizer (s3);
String[] b = new String[10000];
String[] br1_n=new String[1000];
int j=0;
while (st1.hasMoreTokens())
s4 = st1.nextToken();
b[j]=s4.substring(0,s4.length()-3);
s7=s4.substring(s4.length()-2);
br1_n[j]=s7;
j++;
numTokens1++;
int x=0;
for(int m=0;m<a.length;m++)
for(int n=0;n<b.length;n++)
if(a[m].equalsIgnoreCase(b[n])){
int sc=Integer.parseInt(br_n[m]);
int sc1=Integer.parseInt(br1_n[n]);
int score=sc+sc1;
o.writeBytes(a[m]+","+score+"\n");
break;
else
o.writeBytes(a[m]+","+br_n[m]+"\n");
break;
}catch(Exception e){} -
I need php code for copy paste our all histroy of browser in a text page.
I need php code for copy paste our all histroy of browser in a text page can any one send me the code please.
You can use an application like GarageSale for doing this....
http://www.macupdate.com/info.php/id/16035/garagesale -
Need a code for Customer exit for extractor 0WBS_ELEMT_ATTR
Hi Guys,
I need a code for following requirement.
I have appended some fields to standard extractor 0WBS_ELEMT_ATTR which normally takes data from PRPS table. But the new fields will be getting data from PRTE and PROJ table. with common keys. Following is my code which is not working. Please help me out, I am not good in abap. Please note some lines are commented.
Thanks,
H
CODE:::::
form 0wbs_elemt_attr tables i_t_data structure biw_prps.
data: it_wbs_prps like biw_prps occurs 0.
data wa_prps like it_wbs_prps.
data: begin of it_wbs_prps occurs 0,
PSPNR like prps-pspnr,
POSID like prps-posid,
PBUKR like prps-PBUKR,
IZWEK like prps-IZWEK,
USR10 like prps-USR10,
USR00 like prps-USR00,
USR02 like prps-USR02,
OBJNR like prps-OBJNR,
end of it_wbs_prps.
data wa_prps like it_wbs_prps.
data: begin of it_wbs_prps1 occurs 0,
PSPNR like prps-pspnr,
POSID like prps-posid,
end of it_wbs_prps1.
data wa_prps1 like it_wbs_prps1.
data: begin of it_wbs_prte occurs 0,
posnr like prte-posnr,
PSTRT like prte-PSTRT,
PENDE like prte-PENDE,
ESTRT like prte-ESTRT,
EENDE like prte-EENDE,
ISTRT like prte-ISTRT,
IENDE like prte-IENDE,
end of it_wbs_prte.
data wa_prte like it_wbs_prte.
data: begin of it_wbs_proj occurs 0,
PSPNR like proj-pspnr,
PLFAZ like proj-plfaz,
PLSEZ like proj-plsez,
end of it_wbs_proj.
data wa_proj like it_wbs_proj.
refresh: it_wbs_prte, it_wbs_proj.
*it_wbs_jest.
if i_t_data[] is not initial.
Get data from PRPS WBS Master Data
select pspnr posid PBUKR IZWEK USR10 USR00 USR02 objnr
into corresponding fields of table it_wbs_prps
from prps
for all entries in i_t_data
where POSID = i_t_data-POSID.
sort it_wbs_prps by posid.
Get data from PRPS1 WBS Master Data
select pspnr posid
into corresponding fields of table it_wbs_prps1
from prps
for all entries in i_t_data
where POSID = i_t_data-POSID.
sort it_wbs_prps1 by posid.
Get data from PRTE Scheduling Data for Project Item
if it_wbs_prps1[] is not initial.
select posnr PSTRT PENDE ESTRT EENDE ISTRT IENDE
into corresponding fields of table it_wbs_prte
from prte
for all entries in it_wbs_prps1
where posnr = it_wbs_prps1-pspnr.
sort it_wbs_prte by posnr.
endif.
Get data from PROJ Project Master Data
if it_wbs_prps1[] is not initial.
select pspnr PLFAZ PLSEZ
into corresponding fields of table it_wbs_proj
from proj
for all entries in it_wbs_prps
where pspnr = it_wbs_proj-pspnr.
sort it_wbs_proj by pspnr.
endif.
loop at i_t_data.
clear: wa_prps1, wa_prte, wa_proj.
read table it_wbs_prps into wa_prps with key
posid = i_t_data-posid binary search.
read table it_wbs_prte into wa_prte with key
posnr = wa_prps1-pspnr.
read table it_wbs_proj into wa_proj with key
pspnr = it_wbs_proj-pspnr.
i_t_data-zzPBUKR = wa_prps-pbukr.
i_t_data-zzIZWEK = wa_prps-IZWEK.
i_t_data-zzUSR10 = wa_prps-USR10.
i_t_data-zzUSR00 = wa_prps-USR00.
i_t_data-zzUSR02 = wa_prps-USR02.
i_t_data-zzPSTRT = wa_prte-PSTRT.
i_t_data-zzPENDE = wa_prte-PENDE.
i_t_data-zzESTRT = wa_prte-ESTRT.
i_t_data-zzEENDE = wa_prte-EENDE.
i_t_data-zzISTRT = wa_prte-ISTRT.
i_t_data-zzIENDE = wa_prte-IENDE.
i_t_data-zzPLFAZ = wa_proj-PLFAZ.
i_t_data-zzPLSEZ = wa_proj-PLSEZ.
modify i_t_data.
endloop.
endif.
endform. " 0wbs_elemt_attrHi,
it_wbs_prps1 .
If you are going to use this internal table to check for a null condition, shouldn't you first assign the data package to it?
For example, it_wbs_prps1 = i_t_data[].
Because you are now using it_wbs_prps1 to select data from a table and it doesn't have any data.
Please check.
-RMP
Edit : Please ignore this. I didn't see that you are actually filling the internal table. Sorry!
Edited by: RMP on Oct 18, 2010 12:16 PM -
Need a code for finding prime no.s from 0 to 100.
Hi,
i need a code for finding prime no.s from 0 to 100.
Please help me out.
Regards,
Santosh Kotra.hai santosh,
here is an example program to find the prime number...........
EXAMPLE:
DATA: BEGIN OF primes OCCURS 0,
number TYPE i,
exp TYPE i,
END OF primes.
DATA: w_mult TYPE i,
w_limi TYPE i,
w_prem TYPE i.
DATA: w_outp TYPE text132.
DATA: w_rtime TYPE i,
w_stime TYPE p DECIMALS 3.
DEFINE add_part.
sy-fdpos = strlen( &1 ) + 1.
&1+sy-fdpos(*) = &2.
condense &1.
END-OF-DEFINITION.
PARAMETERS: p_numb TYPE i, "number to check
p_fact TYPE c AS CHECKBOX, "display components
p_nbpr TYPE c AS CHECKBOX. "nb of primes
START-OF-SELECTION.
GET RUN TIME FIELD w_rtime.
IF p_nbpr IS INITIAL OR p_numb LE 12000.
PERFORM eratostene USING p_numb.
add_part w_outp p_numb.
READ TABLE primes WITH KEY number = p_numb.
IF sy-subrc = 0.
add_part w_outp 'is prime'.
ELSE.
IF p_fact IS INITIAL.
add_part w_outp 'is not prime'.
ELSE.
add_part w_outp '='.
w_limi = p_numb.
LOOP AT primes WHERE exp GT 0.
CHECK primes-number LE w_limi.
IF w_prem GT 0.
add_part w_outp '*'.
ENDIF.
IF primes-exp GT 1.
add_part w_outp '('.
add_part w_outp primes-number.
add_part w_outp '^'.
add_part w_outp primes-exp.
add_part w_outp ')'.
ELSE.
add_part w_outp primes-number.
ENDIF.
w_limi = w_limi / ( primes-number ** primes-exp ).
IF w_limi = 1.
EXIT.
ENDIF.
w_prem = 1.
ENDLOOP.
ENDIF.
ENDIF.
WRITE: / w_outp.
IF NOT p_nbpr IS INITIAL.
DESCRIBE TABLE primes LINES sy-tmaxl.
CLEAR: w_outp.
add_part w_outp 'Number of primes:'.
add_part w_outp sy-tmaxl.
WRITE: / w_outp.
SKIP.
LOOP AT primes.
WRITE: / primes-number.
ENDLOOP.
ENDIF.
ELSE.
PERFORM factors.
ENDIF.
GET RUN TIME FIELD w_rtime.
w_stime = w_rtime / 1000000.
SKIP.
CLEAR: w_outp.
add_part w_outp 'Calculation time:'.
add_part w_outp w_stime.
WRITE: / w_outp.
FORM eratostene *
FORM eratostene USING in_number TYPE i.
DATA: BEGIN OF no_primes OCCURS 0,
number TYPE i,
END OF no_primes.
DATA: cnum TYPE i,
dnum TYPE i,
limi TYPE i,
mult TYPE i,
puis TYPE i,
cmod TYPE i.
IF NOT ( p_fact IS INITIAL AND p_nbpr IS INITIAL ).
limi = in_number.
ELSE.
limi = sqrt( in_number ).
ENDIF.
cnum = 2.
WHILE cnum LE limi.
READ TABLE no_primes WITH KEY number = cnum.
IF sy-subrc NE 0.
primes-number = cnum.
mult = 2.
puis = 1.
dnum = mult * cnum.
WHILE dnum LE in_number.
READ TABLE no_primes WITH KEY number = dnum.
IF sy-subrc NE 0.
no_primes-number = dnum.
APPEND no_primes.
ENDIF.
IF NOT p_fact IS INITIAL.
cmod = dnum MOD ( cnum ** puis ).
IF cmod = 0.
cmod = in_number MOD ( cnum ** puis ).
IF cmod = 0.
primes-exp = puis.
puis = puis + 1.
ENDIF.
ENDIF.
ENDIF.
mult = mult + 1.
dnum = mult * cnum.
ENDWHILE.
APPEND primes.
CLEAR: primes.
ENDIF.
cnum = cnum + 1.
ENDWHILE.
ENDFORM.
FORM factors *
FORM factors.
DATA: ex_factors TYPE string,
mod TYPE i,
still TYPE f,
factor TYPE i,
exponent TYPE i,
square TYPE f,
fac_string TYPE text40,
exp_string TYPE text40.
IF p_numb LE 3.
ex_factors = p_numb.
ELSE.
factor = 2.
still = p_numb.
DO.
CLEAR: exponent.
mod = still MOD factor.
WHILE mod = 0.
exponent = exponent + 1.
still = still div factor.
mod = still MOD factor.
ENDWHILE.
IF exponent EQ 1.
fac_string = factor.
CONCATENATE ex_factors '*' fac_string
INTO ex_factors
SEPARATED BY space.
CONDENSE ex_factors.
ELSEIF exponent GT 1.
fac_string = factor.
exp_string = exponent.
CONCATENATE ex_factors '* (' fac_string
'^' exp_string ')'
INTO ex_factors
SEPARATED BY space.
CONDENSE ex_factors.
ENDIF.
factor = factor + 1.
square = factor ** 2.
IF square GT still.
EXIT.
ENDIF.
ENDDO.
IF still GT 1.
CATCH SYSTEM-EXCEPTIONS convt_overflow = 1.
fac_string = factor = still.
ENDCATCH.
IF sy-subrc NE 0.
fac_string = still.
ENDIF.
CONCATENATE ex_factors '*' fac_string
INTO ex_factors
SEPARATED BY space.
CONDENSE ex_factors.
ENDIF.
SHIFT ex_factors UP TO '*'.
SHIFT ex_factors BY 2 PLACES.
ENDIF.
WRITE: / p_numb RIGHT-JUSTIFIED.
IF ex_factors CA '*^'.
WRITE: '=', ex_factors.
ELSE.
WRITE: 'is prime'.
ENDIF.
ENDFORM.
HOPE THIS WILL BE HELPFULL.
regards
praba. -
I need ready code for a simple paint program today
hi all I need ready code for a simple paint program today for me ics projct
plz give me a halp on this give me what you have with you and it is so good if it look like this :
Design a GUI based drawing Java application that works like a simple paint program
1-There should be a number of buttons for choosing different shapes to draw. For example, there should be a button for rectangle. If user presses the rectangle button, then he can draw a rectangle using mouse. Similarly, there should be a button for each shape(rectangle, circle, ellipse, and line etc.
2-The shapes can be filled with different colors.
3-There should be option of moving .
4- There should also be three menus including File, Shape, and Color menu.
i. File menu can have menu items New and Exit. If user selects New, the drawing area will be cleared and all shapes will be erased.
ii. Shape menu will serve the same purpose as of feature 2 described above. It will have menu items for drawing all the different shapes. For example, there will be menu item for rectangle; so user can draw a rectangle by selecting the menu item for rectangle.
iii. Color menu will serve the same purpose as of feature 3 described above. It will have menu items for all the colors which are shown in color buttons. The user can select a color from this menu and then click inside a shape to fill it with the selected color.Read the Swing tutorial. There are sections on how to use menus and painting and all other kinds of stuff you need to do this homework assignment. Nobody here is going to write the code for you:
http://java.sun.com/docs/books/tutorial/uiswing/TOC.html -
Why I need a code for rent a film and where ist the code? (I dont have a card)
Why I need a code for rent a film and where ist the code? (I dont have a card)
it's unclear what you mean
you say you dont have a card which I guess is you don't have a creditcard
in which case the other option is to pay by a giftcard which include a code which you put in
because to rent you have to pay otherwise it's not really renting -
I need a code for verifiing my emailadress. How do get a new one ?
Photoshop Elements 12
Share
Try to send email directly from Photoshop elements
The program ask for a code to verifiing my emailadress
I need a code for verifiing my emailadress. How do get a new one ?Check your email. The screen capture says that they sent one to the email address listed.
-
Need download link for Adobe Acrobat X pro for mac
Need download link for Adobe Acrobat X pro for mac
You can download some of the older versions of Adobe software directly from the Adobe website. See the following links for details.
Accessible from these pages:
Download and installation help
Adobe Downloads - other downloads
Downloads available:
CS6 | CS5.5 | CS4 | CS3
Acrobat XI, X | 9,8
Premiere Elements 11, 10
Photoshop Elements 11, 10 -
Need T.Code for "Classify G/L Accounts for Document Splitting"
Hi All,
I need the T.Code Document Splitting "Classify G/L Accounts for Document Splitting"
Menu Path is:
IMG-Fin. A/c- General Ledger A/c- Business transaction - Document Splitting - Classify G/L Accounts for Document Splitting
Thanks & Regards,
Mohan.Need T.Code for "Define Document Splitting characteristics for G/L Accounting and
Define Document Splitting method -
hello sir,i need labview code for a code which is written in matlab...
clc;
close all;
clear all;
Ez= zeros(1,200);
Hy=zeros(1,200);
Ca=1;
Cb=.4519;
n=1;
while(n<1500)
for k = 2:200
Ez(k)=Ez(k) + Cb*(Hy(k)-Hy(k-1));
end
Ez(1)=1;
for k=1:199
Hy(k)=Hy(k)+Cb*(Ez(k+1)-Ez(k));
end
plot(Ez,'b')
hold on
plot(Hy,'r')
hold off
pause(0.001);
n=n+1;
end
thankuWell, this code is quite trivial and if you have to learn LabVIEW anyway, you might as well try to implement it.
A few things to remember:
The first array element in LabVIEW has index #0, while in matlab it has index #1, so everything dealing with array indices needs to be adjusted slightly.
The zeroes function equivalent is "initialize array".
Keep the array in a shift register as you update elements.
use FOR loops.
Use one of the graphs to display the data.
LabVIEW Champion . Do more with less code and in less time . -
I need activation code for my ipad
PLeas i need activation code for my ipad becouse i cant open it ana i know the apple id and password
Only the person who initiated the Activation Lock can remove it. if purchased used/2cd hand,
contact the seller for assistance. This is what they need to do:
Prepare your device to sell or give away
If seller refuses or cannot be contacted, the iPad is useless. There is no workaround for
Activation Lock.
iCloud: Find My iPhone Activation Lock in iOS 7 & later
http://support.apple.com/kb/HT5818?viewlocale=en_US&locale=en_US
http://support.apple.com/kb/TS4515
If you are the original purchaser, gather up proof of purchase and take that proof + the iPad
to a physical Apple store where they may be able to assist you.
What is the exact complete wording of the error message you are receiving? -
I need java code for chating application
i need java code for chating application. plz help me
GANGINENI wrote:
i need java code for chating application. plz help meGIYF.
[http://today.java.net/pub/a/today/2006/10/05/instant-messaging-for-jabber-with-smack.html|http://today.java.net/pub/a/today/2006/10/05/instant-messaging-for-jabber-with-smack.html]
File under: lern2Google
Maybe you are looking for
-
Workflow condition to check error records in a multi line container element
Hi All, My requirement is to change a standard workflow in which below condtion is checked and subsequent action is taken. The condtion checks a return internal table contains a row or not. Now the problem is for success and Information messages also
-
Dweaver:.jpg rollover activates .swf in seperate AP-Div
Thursday, May 15th, 2008: 7:22pm PDT Hi, I'm using Dreamweaver CS3 and I have built separate Flash CS3 .swf movie clip files that are contained (one at a time) in the center of the page by an AP-Div Tag on my web page. Around the center AP-Div tag ar
-
How can I control an iPad screen from a Mac
I have a friend who needs help using her iPad. She lives 1500 miles away. Is there any way I can control her iPad remotely from my iMac?
-
Revision: 10134 Author: [email protected] Date: 2009-09-10 15:08:05 -0700 (Thu, 10 Sep 2009) Log Message: Improvements to the VAST document object model. Modified Paths: osmf/branches/briggs-prototype/libs/VAST/.flexLibProperties osmf/b
-
Next Button within Stories to change Track
I am trying to do a Play All feature which will allow the user to advance to all of the (79) Chapters on a training DVD that I am making. There are end jumps on each of these chapters so I have had to divide it into 2 tracks otherwise I get the 'too