Need product numbers of HP notebook keyboard and Harddisk
Hi all !!!
My laptop computer keyboard and Harddisk drive not working properly and i need to replace this two items. but i don't know the correct product number of the keyboard and harddisk drive. Any one know the product number plz help me.
Product Model : HP Pavillon g6 - 1011TU Notebook
Product Number : LQ893PA
Thank you
Chamath
This question was solved.
View Solution.
You will find the poduct numbers here in the Maintenence & Service guide for the G6 notebook. As far as the hard disk goes I strongly recommend that you use SATA instead of SATA2 or SATA3 for the best compatibility with the disk controller interface on the system board.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer
Similar Messages
-
HP notebook keyboard and mouse not working
Hi
I spilled tea on my notebook. Now the system boots but keyboard & mouse do not work. Therefore I am not able to
login at the windows screen. When I hardboot, on pressing esc it goes to boot menu, but then the keyboard stops working
so I cannot go to safe mode or recovery mode. I also tried pressing F11 to enter BIOS, but it does not work.
I can however access it via LAN and since I had shared the C drive, I was able to recover the data. Do you have any idea
how I can restore the system now ? I do not have the recovery disks.
Are there any particular function keys to press while booting ?
Thanks a lot for your helpThoughts on a Soggy System:
Have you tried the obvious -- connecting an external keyboard and mouse? If you are not near a store where you can buy these, you can order them online as a set. Almost anything would do and Windows 7 and 8 install basic drivers for most keyboards and mice without problems when the system comes online.
If you have not waited for several days for things to REALLY dry out before attempting to get back onto the system, then you may get away with this yet - if you WAIT for a few days. Chances are not great, but ... ?
If you can get the system to a repair shop, it is not terribly expensive to have the keyboard / touchpad replaced -- assuming that is all that is wrong with the system -- and the repair is not a lengthy process. This might be something you can do yourself if you are skilled, disparate, in a tiny spot on the planet somewhere (without a repair shop), or like these things...
We can check for part numbers and all of that if you are interested. You can search for for yourself, too.
Start at
Support and Drivers
Enter your information -- Look along the colum and Click on Manuals. You are looking for the Maintenance Manual.
If you do not find it, provide your Exact Product number and I will look for you.
Locate the Notebook Product Number
I am pretty sure you are going to have to have some sort of keyboard control over that system to do more than just use the hard drive to do a hard recovery of the data. You are not at that point until you determine that you cannot access the data through the computer itseslf...
You can always send the system to HP and have it repaired. It is not free unless you have the warranty for it - but it is not horrible to do; HP makes the process pretty easy. It might be worth checking if you do not have a local option available!
Contact HP - USA
Good Luck!
Kind Regards,
Dragon-Fur -
Keyboard and tracker not working
have just purchased a macbook air. After only a couple of hours my notebook keyboard and tracker are not working. the cursor is stuck on upper left hand side of the screen and its stuck on 'bluetooth setup assistant' looking for a wireless keyboard.
Have tried forced shutdown a couple of times but nothing happens
Any ideas? The mac forums are saying I need to reinstall the OS but I don't have a CD drive ( yet!)
DIt is a common fault with new Mac Air. I had to bring it to an Apple store to get fixed. They did it for free.
-
Georgian keyboard and language support in Ipad/Iphone
Dear Sir/Madam
My concern is about official support of Georgian keyboard and language in all Apple products. Please add Georgian keyboard and language in Ipad/Iphone devices, because a lot of people are using Ipad/Iphone in Georgia and this issue is still out of support and assistance. I wish to receive any helpful information regarding this topic.These are user-to-user forums, you are not talking to Apple here (there are too many forums/threads/messages for Apple to monitor them). If you want to leave feedback for Apple then you can do so here : http://www.apple.com/feedback/ipad.html (but note that they don't reply to feedback).
-
I'm using apple's bluetooth keyboard and I need an easy way to switch between the text and numbers fields instead of tapping on the screen
While not in edit mode:
- if start typing numbers, then it enters number mode.
- if start typing text, then it enters text mode.
Using the arrow keys exits edit mode. So this should work for you:
1 Type text into a cell, which enters text mode.
2 Press Return to move to the next cell.
3 Press right arrow key to exit edit mode.
4 Press left arrow key to get back to the cell.
5 Type a number, which enters number mode.
Another method that requires more planning ahead of time is to format the cells as text or number before starting the data entry. Then when you navigate to a cell while in edit mode, you will be in the appropriate mode (without having to exit edit mode).
This all works fine for me. Hopefullly it does for you also. -
Yesterday I was working on my computer and I changed English to Lithuanian language on the keyboard. I shut down my computer. Now when I want open it, I can't type correct password to access my account . There is left Lithuanian language on keybord, with has no numbers. And I need numbers to use for my password.
loretarem wrote:
There is left Lithuanian language on keybord, with has no numbers.
It does have numbers of course, they are made by first hitting the ` key (top most left most on a US keyboard) and then the usual number key. Have you tried that? Such combos often don't work in password fields, but you never know. -
Need to have the keyboard and mouse 100 feet away from Mac
I need to have the Keyboard and Mouse/Track-pad 100 feet away from Mac Mini.
What are my options ?
ThanksIn your case with the need to control it from multiple locations the best and realistically only solution is to use Screen Sharing to remotely control the Mac.
With this solution you can control it from anywhere you have a network connection and could use a laptop to control the Mac mini. This is the solution I use in a very similar situation.
Bluetooth does not have enough range, even RF wireless keyboard and mice devices also would not have the range, and I don't believe there is a suitable USB solution.
The only other possibility that occurs to me is to use an IP based KVM. A KVM (Keyboard/Video/Mouse) switch box allows multiple computers to be controlled from typically a single keyboard and mouse. However there are versions which allows you to do this over a TCP/IP network i.e. Ethernet. Then again you would be able to do this anywhere on your network. Here is one example - http://www.aten-usa.com/products/productItem.php?model_no=CN8600
Personally I still strongly recommend using Screen Sharing. Its built-in and completely free! -
Listing product numbers and linking related pdf
I need to create a web page that just lists our product
numbers and link a pdf for each. We are having problems with our
original website where no changes can be made (including pricing).
I am building a new one and although I have our shopping cart 90%
complete, this company wants a list to go up with the home page so
we can take the other site down while I continue building the
proper remaining pages for our site. I can copy and paste my
product numbers into DW, though I will have to go in an link a pdf
to each. Any suggestions on the best way to do this?quote:
Originally posted by:
Newsgroup User
unless i'm misunderstanding your question, what you need to
do isn't
more difficult than what you already said. just link the
product number
to the corresponding PDF and make sure the PDFs are uploaded
to the server.
easy peasy!
if you're looking for something that will automate the
process, i don't
think there is one.
You're right the copy and paste is easy, but I don't know how
to get the PDF's linked without doing each one individually...
which isn't difficult, just time consuming and mind numbing. I was
hoping for suggestions as to the easiest way to bring the data into
DW, whether it was copy and paste or to import a .csv or another
avenue that I'm not aware of. Additionally, if there's an easier
way to link 150+ PDF's.
Because I'm new to DW (building my first website), I also
don't have the knowledge of the best way to set up that temporary
page. At this minute I merely created a blank HTML page and created
a table, then I imported a product .csv file to fill that table.
When I launched both Safari & FF, the products look fine in
their columns and rows along with the few PDF's that I linked. -
My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?
I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon. -
Hi, I am new in Apple Computer, I bought a used Power Mac G5. I want to buy a blue tooth card for the same to use wireless keyboard and mouse. so why it is mandatory to provide the serial number of the machine?
Hello, Serial# not needed...
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1 -
I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...
jpqcampos wrote:
This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
Here are the two tables, Data on the left and Summary on the right. Notes below.
The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
Data table:
D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
D3 (and filled down the rest of column D): =AND(OR(B2,C2),NOT(OR(B3,C3)))
The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
Summary table:
Column A contains labels for the age ranges to be counted.
Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
C2 (and filled right to column D, then both filled down to row 5):
=COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
Two changes from the previous example:
COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
See note below regarding my earlier formula.
When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
Close the reorganize pane, and the 'data entry form' is ready to use.
To use, enter the age first, then check one of the boxes.
As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
Regards,
Barry
Note regarding formula in my earlier post:
The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
Fill down to E8.
Ignore the instructions (in that post) following "Fill down to E8."
B -
My Macbook Air (13", mid 2011) right after I did the Maverick OS update. My keyboard on Macbook Air is not working and it says "There isn't a keyboard connected" (Bluetooth Keyboard Setup). I do not use a wireless keyboard. Apparently my bluetooth works because my wireless mouse works. I am currently stuck at my login screen not being able to get in because I can't even enter my password. I am, however, able to login as guests and get to the Keyboard viewer to type things with my wireless mouse. I really need my keyboard to work to use for my job. I need help please!
I forgot to mention that my power button did work but everything else, keyboard and trackpad, didn't! Anyway, I shutdown my laptop, slept, and turned it back (in hopes that it might work instead of restarting it like before). Now my keyboard and trackpad works! Thank goodness! I was about to go to the Apple store upset too!
-
I try to open Acrobat I get a message that I need to register the product. I click on register and after about a minute, I'm told that I don't have an internet connection. My internet connection is working fine. In fact I registered Acrobat Pro XI using my account, but the program itself will not recognize it or allow me to use the software. What do I do?
If you already registered, then there is no point to trying to do so again. Simply dismiss the dialog.
Mylenium -
In the numbers app, using the "date and time" function, is it possible to remove the time? I need to put together a list of dates, but I don't need or want times.
When formatting your column to date/time, pick Date & time, and then pick the letter i in the circle to the right. Then scroll down and pick "No time"
Jason -
About numbering and section options... I need section numbers (1.1,1.2,1.3) that will automatically update as I remove ort add a page. Seams complicated. Could someone HELP me? Thanks
INDESIGN
I finally found it. Took me couple of hours. It is OK now
2014-11-18 11:05 GMT-05:00 kglad <[email protected]>:
About numbering and section options... I need section numbers
(1.1,1.2,1.3) that will automatically update as I remove ort add a page.
Seams complicated. Could someone HELP me? Thanks created by kglad
<https://forums.adobe.com/people/kglad> in Adobe Creative Cloud - View
the full discussion <https://forums.adobe.com/message/6940603#6940603>
Maybe you are looking for
-
> The option to create a new folder is available, however when I click create, no new folder is created. > I have 5 separate email accounts I am running, it is only 1 specific account which I can't create new folders for. > I used to be able to creat
-
Last conditon type is not active in the pricing procedure
Hi gurus, In the standard system, when there are multiple Condition types exists in the pricing procedure for the same condition class ( Example : Price) then the value of the last condition type should be active and rest all should be inactive. Wher
-
It used to work before the last Firefox update. It still works on my husband's computer and our settings are the same as far as I can tell. How do I fix this?
-
How to get app updates to auto download
Are app updates supposed to auto download? I have just updated some apps on the iPad but the iPhone still has the three updates in the app store. Both devices are connected to the same wifi
-
How do I get original artist and albumns to download on itunes
I would like to know how to download original artist and albumns fron itunes