Need publishing error help - new user.

I am new to the mac world having just purchased a MacBook, signed up with a mac account, and am trying to test load a very simple 2 page web site. I continue to get publishing errors (different file names sometimes appear when I retry to publish). Nothing shows up on my idisk, so nothing is getting through. I have tried to publish about a dozen times over the last couple of days. I note others have had similar errors. Since space is not an issue on my idisk and the site is so small, I'm not sure what to try next. Any ideas? Thanks.<

Dr. B.. this fixed about 90% of the publishing errors for me.
Hope this helps...
Jim
“iDisk Quota Error” fix
A. Quit iWeb, if it is open. Select Go to Folder from the Finder's Go menu.
Then type (or copy and paste) ~/Library/Application Support/iWeb into
the field and click Go. You should now see a file named, Domain.
(or you could just do it manually by opening the hard disk, open the Users folder, then open the Folder with your user name on it, open the Library folder, open the application support folder, open the iweb folder, and then you should be looking at the DOMAIN file.)
This is a Mac OSX package file. Note: A package is a relatively common type of document in Mac OSX; it is essentially a sealed folder. It contains individual items, but cannot be opened in the same manner as a folder.
B. To open the package, hold the Control Key and click on the Domain package file. Note: If you have a two-button mouse, this step can be accomplished by right-clicking the Domain package file.
C. Select Show Package Contents from the contextual menu that appears.
D. A new window will appear containing a folder named Contents.
E. Open the Contents folder. Here you will see one, and possibly two files named assets.<membername>.groups.<groupname>.plist or assets.<membername>.plist, where <membername> and <groupname> correspond to your .Mac member name and .Mac Group name. Note: Your .Mac member name is the first part of your .Mac email address, before "@mac.com."
NOTE FROM ME... I didn’t find these files in the Contents folder, I found
them when I opened the Domain File itself. Whatever.. when you find one,
or maybe both of these files, delete them. (some people have both, some
have one)
F. If you have either or both of these files, move them to the trash. Then close
the Contents window.
G. Relaunch iWeb and try publishing again.

Similar Messages

Error Creating New User Accounts when Setting Terminal Services Attribute

We have just started receiving this error when new users are being created in our domain as part of the new hire process. Does anywhere have any pointers on where to look and what to look for?
ErrorError
com.waveset.util.WavesetException: WTSQueryUserConfig() failed - Attribute: 'Terminal Services Home Directory Drive' Error: The specified user does not exist.
Is this something that would indicate that AD isn't replicating across multiple domain servers yet, and thus when it tries to set this attibute this command isn't finding the account? If that is the case is there a way to have a retry put in?

May I ask what version of IDM you're running?
There's a known bug that relates to this functionality. A quick review shows it's a pretty close match (not 100%) to what you described.
Bug 20728: Setting AD 'Terminal Services Local Home Directory' to null in IdM results in WTSSetUserConfig error
It's fixed in 8.1.0.3(or later), 8.0.0.10(or later), or 7.1.1.14(or later).
For the record, the latest IDM patches can be obtained here with valid credentials:
http://sunsolve.sun.com/show.do?target=patches/zp-Software_Network-Internet_Identity_Manager
Regards,
Alex

HT4796 do i need to create a new user each time i do a migration ?

do i need to create a new user each time i do a migration ?

If the computer you are migrating to already has a user the Migration will create a new one.
If not Setup Assistant should be used instead (see Pondini's Guide)

Publish Error: Help needed, please!

When I attempt to publish my site changes from iWeb (I am set up to publish to my personal domain), I get the following error:
"Publish Error
Can’t create the file “cherub_overlay65.jpg.” The disk may be damaged or full, or you may not have sufficient access privileges."
I do not have a photo called "cherub-overlay65.jpg." I think this jpg is part of one of the iWeb "themes."
Any advice? I have published previously and had no problem at all. =(
Thanks in advance!

That song maybe Corrupted...
If you live in a Region that allows re-downloading Music...
Delete the Song(s) and re-download...
See Here > Download Past Purchases
http://support.apple.com/kb/HT2519
If not... Contact iTunes Customer Service
Apple Support iTunes Store Contact Us

Need wifi help new user-be nice!

-new user-how do i obtain password for wifi? trying to enter through guest networ, but don't know password.

- You will have to contact the person who setup/administers the network/router. Sometime the default passwords- is written on a sticker attached to the router.
- Yu can also go to the router and look for the manufacturer and mdel number and then go to the manufactuer's website and downlot the manual for the router. It will like the default password and how to reset the password.

Oracle Help (New user)

Hi, im a new user to oracle express edition and have been given a task at university to complete.
Iv tried searching for tutorials myself but i either A cannot find the ones i need, or B dont understand them,
my task is:
A soft drinks company based in Cramlington require an individual to undertake a data analysis project. The company would like you to produce a prototype of the system, designed as an oracle database system.
The company would like to record sales data. The sales can be through vending machines or shop outlets; as a guide, the prototype needs to record where the items have been sold (vending or shop), details about the items as the company produces a range of soft drinks, prices etc. The region the items are sold in is important as the company would like to produce reports by region to compare sales figures. The new system will be used to make management decisions, such as where to increase marketing, whether items should be withdrawn from the market etc. Sales reports should be based on monthly figures.
Tasks
The database, SQL, forms, reports and all other applications you build for the system should be created in Oracle Express Edition, and submitted on CD-ROM.
The username and password for the DBA in your system should be as used in the lab, as follows:
Username: hecomputing
Password: ramdrive
1.     You are to create the tables in Oracle Express Edition and populate the tables with sample sales data. Take into consideration the requirements detailed above. However remember this is a guide and by no means a full list of data that should be recorded by the system. It is expected that you will produce a third normal form structure and submit this with your application.
2.     Create all forms for data entry. No data should be entered through the table view by the user; the data should be entered via a form.
3.     Create all forms to view, edit and delete data.
4.     Create a drill-down form for item and sales data as a minimum.
5.     Implement triggers to demonstrate auditing, which as a minimum should track
•     Insertion of new data
•     Deletion of existing data
•     Modification of existing data
6.     Implement stored procedures
7.     Provide the user with a customised, informative message if an error is encountered, by implementing Handling Exceptions.
8.     Create queries for data manipulation. All queries should be stored as SQL.
9.     Create reports for sales analysis, based on monthly figures. As a minimum you must create a report for sales per item on a monthly basis, sales per month via each sales type (shop, vending machine) which should also be grouped by region.
10.     Create two users that are not database administrators; user1 password1, user2 password2. Demonstrate user administration, roles, privileges, security and auditing.
11.     You are to informally demonstrate your prototype on the 20th May 2007, in the timeslot you have been allocated. Please see your tutor or Blackboard to confirm your timeslot. All demonstrations will take place between 12:00pm and 5pm on that day.
Can anyone please steer me towards a good set of tutorials that can help me complete the above task.
thanks

Hi,
You can download and study the 'Store' application at http://www.oracle.com/technology/products/database/application_express/packaged_apps/packaged_apps.html#STORE which does many of the things you need. If you 'hack' the app you'll be well on your way.
Keep Smiling,
Bob R

Step By Step Instructions !!!! HELP NEW USER!

Step by step tutorial on how to create a project from A to Z. I am a new user, and i am tired of all the tutorials NI provides, they all talk about creating some bullshit waveform or making some easy calculator vi. They never talk about the real stuff, example, how to start a project, create your vi, compiling or putting together all the vi's, compile everything together and than creating an EXE. Holly shit that's all i am asking for is an idiots guide is it that hard for NI to make ! Can anyone out there direct to something to figure this out maybe a book, article, web page something!!! And no thank you i don't need some sales guy calling me trying to sell NIN bullshit training classes, i have been to them and all the instructor could talk about is creating a ridicolous sine wave genarator (WoW)

I am sure NI would be very happy to hear about any issues with the LabVIEW help that could be confusing to new users.
Here's a link to the LabVIEW help on organizing an managing projects:
http://zone.ni.com/reference/en-XX/help/371361D-01/TOC16.htm
Have you read it and do you still have problems? What was not clear?
Genci wrote:
..., compile everything together and than creating an EXE.
How to built an application Step by step.: http://zone.ni.com/devzone/cda/tut/p/id/3303
You should also be aware that you cannot buit an application using LabVIEW base or full.
You need LabVIEW professional or you need to purchase the application builder.
Genci wrote:
...tired .. bullshit ... Holly shit ...idiots ...bullshit ..ridicolous ...
These are all non-techical terms and not very descriptive in the context of LabVIEW. Could you be a bit more specific on what kind of problems you encountered?
It would also be important to know your programming background? Are you experienced in any other programming environment? Is labVIEW your first attempt at programming? Are you familiar with general programming terms? Are you trying to program for personal enjoyment, for school, or as part of a job. If your employer forces you to switch to LabVIEW, maybe he could send you to some NI classes.
What is your LabVIEW version?
As anything, there is always an initial hurdle that needs to be overcome before becoming familiar in a new environment. Fortunately, this threshold is very low in the case of LabVIEW and you should be up and running after a couple of hours. Mastery takes a bit longer, of course.
Your best bet is to ask a more specific question here in the forum whenever you get stuck. Good luck and enjoy the ride.
LabVIEW Champion . Do more with less code and in less time .

With the new seession in IE gives session error for new user

Hi,
In new opened IE if i tries to login with new user. It is switching b/w the files in the status bar(ie., Header1.jsp and ListServicecall.jsp simultaneously) and at end the session error result will arise.
But for the second time if i login with the same username/password the page is displaying properly. please Can any one help out.
Thanks,
Satish R

First time if the user logins to IE in the HP Service Desk(SD) page. Some of the pages will iteratively loops and give a session expires error. After that the user logins to the page with no error.
If i create a new copy of the data from the existing folder and if i try to run then the result will be error for that folder also.
ie., Assume folder 123 where, first time for every new login user the session expire error occurs. later they'll login without any problem.
If i rename the folder 123 to xyz/create new copy and rename then, the same problem repeats. First time for the new user it will give session expire error and later he can login to the HPSD page with no error.
Is it require cookies to be programmed in that program.
Regards,
Satish R

Outlook Web App error for new user (Exchange 2010)

Hello,
Recently, our new user can't get on OWA because their regional setting page is returning "An unexpected error occurred and your request couldn't be
handled."
with "Url: https://mail.shdm.org:443/owa/languageselection.aspx"
I've search many site and i've not been able to find a working solution.
I've check the redirection, everything seems ok
here is the complete detail message
An unexpected error occurred and your request couldn't be handled.
Request
Url: https://mail.shdm.org:443/owa/languageselection.aspx
User: [email protected]
EX Address: /o=SHDM/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=promoteurs790
SMTP Address: [email protected]
OWA version: 14.3.195.1
Exception
Exception type: System.ArgumentNullException
Exception message: Value cannot be null. Parameter name: value
Call stack
Microsoft.Exchange.Clients.Owa.Core.Utilities.RenderDirectionEnhancedValue(TextWriter output, String value, Boolean isRtl)
Microsoft.Exchange.Clients.Owa.Core.LanguageSelection.RenderTimeZoneSelection()
ASP.languageselection_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer)
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
System.Web.UI.Page.Render(HtmlTextWriter writer)
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Hope that someone can help!
Alexandre

Hi,
I have seen this same error before. That issue resolved by Exchange 2010 SP3 RU7.
So please refer to KB 2961522
and install Update Rollup 7 for Exchange 2010 SP3 to solve this issue.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Need SMTP_ADDRESS Mandatory on New User Create/User Maintenance

Is there a way to require entry of email address upon new user creation or user maintenance without an ABAP enhancement?
It appears that function module ADDR_PERS_COMP_COMM_MAINTAIN writes email address to database for users, but before I try to enhance the code, I'd like to see if this is a change that can be made without code modifications.
Use of report RSADRCK7 is not feasible; users would need to be done one at a time.
This requirement would apply only to functions (SU01) by BASIS/Security; users must remain unable to maintain their email address via System>UserProfile>Own Data.

> enhancement inserted for SU01, screen 0900, to error when SZA5_D0700-SMTP_ADDR is initial, in SAPLSZA5, form D0700_OK_CODE.
If that does not work, then the easiest option is a check after the user creation to verify that all users who are meant to have an SMTP entry in the address data, also have one (from the correct domain, etc...).
Alternately, you can create a standard transaction variant for SU01 and change the screen of the address data tab. When saving (or proceeding to the next screen), the address data must have been maintained.
The first option is certainly much easier and less intrusive to implement...
Do you also use self-registration scenarios? Is that the reason for your question?
Cheers,
Julius

HELP New user, importing Music from library ( WMA )

I am a new user to Itunes ( bit late i know ).
I need to move my music ( my music folder ) into itunes.
I have over 40Gb of music. If i import music folder through Itunes using the file > Import folder menu, i am lead to belive that firstly all my music will need to be converted to Mp3. this is not a problem althouigh i am sure it will take a long time.
My main worry is that when converting the music into itunes the origional my music folder will stay where it is therefore doubling up my music to over 80Gb and therefore will not fit on my hard drives.
i tried to cut and paste my music files into the itunes music folder within my music although it doesnt appear in my library???
Any help appreciated!!!!
Many thanks.
Dell PC Windows XP

Moving files into the iTunes library doesn't comvert them to MP3.
iTunes can only use unprotected WMA files. If you are trying to add protected WMA songs, they won't go into the iTunes library.
You can leave all the music files where they are. iTunes will only copy them to the iTunes folder if you have that option checked.
Here are some articles that may help
http://www.apple.com/support/ipod101/tunes/
Move iTunes Music Folder
Convert Songs To A Different Format

Need a little help new to mac

Need a little help I'm new to Mac.. i have had my ibook for over a year now and i like it a lot, but some times my usb post dies on my for a couple days maybe weeks. Ill have my ipod connected and when i go to plug in a flash drive. It doesn't detect my ipod anymore and my usb port don't work. it says that they were "removed improperly" and now they are not working again..i have tried to reinstall the whole os again and that doesn't work i don't have the hardware test disk so i don't know what could be the problem i know its not the logic board is there any test i can do to it to find out the problem its an ibook late 2001... there is no reset button on it. i tried to hold in the space bar and now when i boot up i get prompt to this screen that shows the world and then a folder with a ? mark but then after a few sec it boots right up im a mess need some help

+it says that they were "removed improperly"+
You have to go to the iPod's icon on your computer (or the flash drive's icon), select it and eject it there before removing it. Otherwise, data can be corrupted and/or lost. Repeatedly removing it without ejecting it from the desktop can cause it not to be recognized any longer.
If your iBook is a "late 2001" model. It should have a reset button. Check out the chart here to make sure which model iBook you have:
http://support.apple.com/kb/HT1772?viewlocale=en_US
+i get prompt to this screen that shows the world and then a folder with a ? mark but then after a few sec it boots right up+
It's trying to find a network volume from which to boot.
Once it's booted up, go to System Preferences > Startup Disk, and select your Mac OS X startup volume. Then close System Preferences. The next time you start up, it should start up without looking for a network volume.

Buffer overrun error when new user closes QuickTime 7.2

I'm receiving a Buffer overrun error for Program: C:\Program Files\QuickTime\QuickTimePlayer.exe
Steps to reproduce error:
Windows XP machine has 7.1.3 installed and user upgrades to 7.2
New user logs onto the machine for the first time
Opens QuickTime 7.2 from the Desktop
Closes QuickTime -- Receives Buffer Overrun error
This error does not show up for the users with an established profile on the machine prior to the QuickTime upgrade.

Problem is with this key:
HKEYLOCALMACHINE\SOFTWARE\Apple Computer, Inc.\QuickTime\Recent Movies
http://discussions.apple.com/message.jspa?messageID=5531581#5531581

IWeb Publish Error - HELP!

HELP! I get a Publish Error when trying to publish from iWeb (using godaddy as web host). Error: "Can't create the file "DSC_0438.jpg." The disk may be damaged or full, or you may not have sufficient access privileges. Godaddy says is Apple issue. HELP!

Try the troubleshooting steps under "Fix iWeb" here...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
... and then republish.

Error adding new users from local server

Hello, BPC Gurus,
We use BPC 7.0 MS SP4, MS SQL 2008 (Server name - BPCP01)
In Administration Console we're trying to add user from local server (server with SQL Database), and warning window is appeared with message "The Server Is Not Operational [BPBCP01]"
I checked Logging folder and found message:
==============[System Error Tracing]==============
[System Name] : OSoftAdminSecurity
[Job Name]     : frmManageUser::GetAllObjectsFromDomainServer
[DateTime]     : 2010-12-06 16:58:43
[Exception]
    DetailMsg : {System.Exception: The server is not operational [BPCP01]
   at Microsoft.VisualBasic.CompilerServices.LateBinding.LateGet(Object o, Type objType, String name, Object[] args, String[] paramnames, Boolean[] CopyBack)
   at OSoft.Consumers.Admin.Security50.ManageDataSet.GetAllObjectsFromDomainServer(String pDomainName, String pLDAPFullPath, Int32 pDomainObjectType, String pObjectValue, String pDomainType)
   at OSoft.Consumers.Admin.Security50.frmManageUser.GetAllObjectsFromDomainServer(String pDomainName, FILTER_TYPE pOptionType, String pOptionValue, String pDomainType)}
===========[System Error Tracing End ]===========
Any ideas?

The installation was done with a local user or with a domain user?
You know that BPC server can not be in the same time also domain controler.
Are you using Windows authentication or CMS authentication.
If you are using CMS authentication then again you can not add local users.
If you are using Windows authentication then you have to go into server Manager
Options - Define System User Groups
Domain Type - Local Windows
System User Group Name - Local Users.
If you are using Windows 2008 make sure you addrole to have compatibility with IIS 6.because using this module bpc is adding new users.
Regards
Sorin Radulescu

Need publishing error help - new user.

Similar Messages

Maybe you are looking for