Need quick answer - need to restore filters...

I know I will get rtfm for this one.
We just had a db go corrupt and are rebuilding it manually. We are on AIX 5.2 and Essbase 7.1.6.
What file(s) on the server contains the filter definitions? We want to pull this from backup.
Thanks!

Hi,
The essbase.sec file contains this information.
Have a look at :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_dbag/frameset.htm?dbackup.htm for more details on backup and recovery, I know it is 9.3.1 but it is still relevant.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Need a quick answer should I get just wi-fi or wi-fi cellular thanks

Need a quick answer should I get wi-fi or wi-fi w/ cellular what do you think is the best way to go. Will be shopping for one in the next few days. Thanks

It depends upon where you will be using it - do you need to be able to access the internet when you are away from wifi networks, and/or do you need built-in GPS (only the cellular iPads have a built-in GPS chip) ? If you get the cellular version then you don't need to activate a service on it until if/when you need it

Use of two HH - quick answer needed - please.

An enginer some three months ago, set up a HHv3 for the broadband and a HHv2 for the phone, so that I could continue to use the hub handsets and not have to replace them. I do not have broadbandtalk.
Want I need to know is: would in your opinion, this set up course the broadband to drop broadband connection, anything up to ten times a day?
The lights on the HHv3 are: power light = on, broadband light = on and wireless light = on.
The lights on the HHv2 are: power light = on, broadband light = off, wirelss light = on and phone light = on.
Surely if both HH's as suggested by UK tech team were connected to the broadband then both HH's broadband light's would be on.
The HHv2 show no connection since 10th January 2011.
The HHv3 is connected to the ADSL side and the HHv2 is connected to the phone side.
It would great if I could get a quick answer to this, as I am in the middle of an email back to the UK tech team.
Thanks to all.

sorry to say, but I don't think that the whole post is being read. As if it were, you would note that one hub is being used on the ADSL side and the other is on the phone side, so in effect the hub that is on the phone side is just being used as a wireless phone and not connected to the broadband/ADSL and is not being used as a router. I did also mention that the event log for the second hub the one being used for phone service only has no connection entries since January 2011. Not even to the time server, so therefore is not being used for any type of broadband connection. Even the broadband light is OFF.

Im using macbook pro ,my version is mac os x 10.4.11 and i cant update anything. how can i update my mac,plzzzz i need a quick answer.

im using macbook pro ,my version is mac os x 10.4.11 and i cant update anything. how can i update my mac,plzzzz i need a quick answer.

check that your current Mac meets the System Requirements for Snow Leopard...
Snow Leopard Specs:
http://support.apple.com/kb/SP575
If it does... then you need to Purchase the Snow Leopard Disc and Install it.
Mac OS X 10.6 Snow Leopard
Would Also Recommend that you do a Bootable Clone Backup of your current Hard Drive Before attempting any Major Upgrade...
By far the easiest way to make a Backup, is to use something like
SuperDuper http://www.shirt-pocket.com/
or CCC http://www.bombich.com/

After a crash of my HD, i need to restore my Itune Library which is in an external HD. how can I do that, Thanks

After a crash of my HD, i need to restore my Itune Library which is in an external HD. how can I do that, Thanks

I still don't know if the drive that crashed was the external drive, or if it was the internal drive, and if it was the external drive if that was the only copy of the library.
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list (e.g., ringtones), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple notes it is your responsibility to back up your purchases.
Select the store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can re-download your available previous purchases.

When i tried to download iOS8 on my iPad Mini it told me that I needed to connect my iPad to iTunes, I have done that and now it says I need to restore my iPad. How can I get my iPad working without losing everything on my iPad?

When i tried to download iOS8 on my iPad Mini it told me that I needed to connect my iPad to iTunes, I have done that and now it says I need to restore my iPad. How can I get my iPad working without losing everything on my iPad? I don't want to lose my apps and photos!
Help would be much appreciated!

If you are getting the connect to iTunes screen then it's too late to take a new backup and/or copy anything off it. Prior to starting the update did you take a backup, either to the cloud and/or to your computer's iTunes ? If not then have you recently taken a backup that might have your photos and apps content/settings in it ?
As long as the apps are still in your country's store then you should be able to redownload them via the Purchased tab in the App Store app (and the Purchased link under Quick Links on the right-hand side of the iTunes store homepage on your computer's iTunes), and if the apps store their content on a server/cloud service then you might be able to get their content back from that - if they store their content on the device then you will need to have a backup.
For our photos you could try doing a search for programs that claim to be able to recover content from a device - I haven't used any so I can't suggest one.

P35 Neo2 - OS died, need help restoring RAID after re-install of XP

I have a P35 Neo2 with on-board Intel RAID. I need a bit of help getting a two drive RAID going again after reinstalling XP.
Here's my situation:
Same hardware, MB, etc. I originally set up the system with a 20gb IDE and two 320gb SATA drives. I put the OS on the 20gb, and set the two 320's up as a RAID. I partitioned the 320's into 200gb + 120gb sections on each drive. The 200gb partitions were mirrored between the two drives, and the remaining 120gb on each drive was used as non-RAID storage space.
I picked up a nasty virus-spyware a month or two ago that I was struggling to find a fix for when the OS began to BSOD. I put the 20gb IDE to the side, and put a 40gb IDE in it's place. I re-installed XP on it last night, and now need to get the RAID up and running again.
I went into Disk Management and it showed three dynamic drives with a yellow triangle icon and labeled 'foreign'. I right clicked and found an option to 'import'. I clicked on import and a window popped up showing all of the partitions and logical drives I had previously created on the two drive RAID. I figured I was in business, so I clicked OK.
Disk Management now shows one dynamic disk as 'Online', but still shows two as 'Foreign'. If I right click on them, and chose import, I get the same window showing my partitions and logical drives, but if I click OK, I get a warning message that: "Some of the volumes you are importing will lose data because you have not moved all of your disks to the system."
I'm in over my head at this point, so any help would be appreciated.
Thanks,
GeoD

A 200gb partition is restored, but the 120gb is not, which is confusing. ALso, when I look at the logical drives in the partition, I'm beginning to think I had the 200gb mirror /120 gb storage backwards. The data restored is not something I would be concerned with losing. It's installed applications, and multimedia files that I could lose without worry.
There is also 70gb dynamic drive labeled Missing. I know I left a small portion of all three of the drives unallocated as a reserve, so that must be what this is. It's like the RAID info is incomplete which leads me to the next piece of info.
Something I didn't initially mention for the sake of brevity, was when I right-clicked on 'Import Disk' the applet noted the disk was 3/3. I assumed that meant disk 3 of 3 disks. I've since begun to wonder if I imported the disks in the wrong order. ie) I should have imported disk 1/3 first.
Do you know how to clear out Disk Mgt's info, so I can start over?
I also noticed only one of the 320 SATA's shows up in Device Mgr, (DM). What I found both confused me and encouraged me.
When I created the array, I named the the drives RAID0 and RAID1. They both show up in DM. But only one of them shows up as the drive model: WDC WD3201ABYS-01B9A0. There should be two of them.
The OS knows there should be a RAID, but for some reason only one of the drives show up as hardware. I rebooted and checked the data and power supply cables, (connected), the BIOS, (both drives show up) and both drives show up in Disk Mgt. Just not in DM.
Does that mean the HD has died?
Part of my difficulty is I had a brain injury in 2001, followed by another in 2003. The 2nd injury caused 6 months of what the docs call it a walking coma - I walked and talked, but have no memory of the time.
When I 'woke up' in the Fall of 2003, I found I had lost considerable cognitive function and other problems. These problem have ended up disabling me, (I'm now on SS Disability).
Until then I had been a 'System Admin' for micro-businesses, (max - 15 computers). I built systems and servers, installed networks, maintained them and did all the support. Basically I was these company's Sys Admin on an as-needed basis.
One thing I lost was the ability to troubleshoot and repair hardware. Combined with other cognitive problems, I was forced into closing my business. At the time, I was maintaining close to fifty offices; ~20 had Peer-to-Peer networks & ~20 had servers I had built.
What's doubly frustrating is I was just getting ready to sign up with an online backup service when I got hit with a nasty malware/virus that's so new there's no info on the 'net about it. I got entangled in trying to fix it and spaced out the online back up. Now I find myself in a situation where I desperately need to restore the data on these RAID drives. Because of the memory problems I now have, I completely depend on my computer as an auxiliary 'brain' - I have stuff on these drives that I have to have.
I didn't do much with RAID when I was still in the biz, and this is the first time I've had problems with a RAID of my own, so I'm struggling to figure this stuff out.
Should I be able to install one of these drives by itself so I can get the data from it? The way I understand the theory of RAID is that if one drive dies, you can put another in and the mirrored portion will re-create itself on the new drive. Couldn't that be a way to get the important data off the drive or drives if they don't want to go back together as a RAID?
I could back each up to the online service and then just rebuild them. Not my first choice, but it would reduce my stress level if I thought I could do it.
Sorry to go on, but now you can see why I'm both struggling & worried.
Thanks for any info or help.
Later,
GeoD

Help needed on restoring Iphone..post IOS update..getting an error -1

Help needed on restoring Iphone..post IOS update..getting an error -1

try restarting your computer i had that problem i unplugged my phone from itunes restarted my computer and then it worked

I have an iPhone 4S and never had a problem with syncing it. But suddenly, when I connected my phone to my mac, it says that its in recovery mode, and I need to restore it in order to sync. I've updated both my phone and my itunes, and it didnt work.Help?

I have an iPhone 4S and never had a problem with syncing it. But suddenly, when I connected my phone to my mac, it says that its in recovery mode, and I need to restore it in order to sync. I've updated both my phone and my itunes, and it didnt work.Help?

fighter19lisa wrote:
that only makes it say its synced, when its not.
No, it does not. It transfers purchases from the iDevice to the computer. The computer must be authorized for the Apple ID that the content was acquired with.
fighter19lisa wrote:
my playlists wont show up on the phone.
Are they selected to sync? Is Manually Manage content on the device selected?
fighter19lisa wrote:
i had to change my password for my aol account again and i still cannot get my email on my phone to even work
What does that have to do with syncing content to the device? FYI, nothing.

My iPod has a image of the usb conector from ipod and there is an arrow pointing to the iTunes symbol, when I connect it to my computer it says it needs to restore, but I don't want to lose all the apps I bought and fotos, etc. What do I have to do?

My iPod has the image of the usb conector and an arrow pointing to the ITunes's symbol. It says it needs to restore. I have been using it for 5 days. What do I need to do? Please answer <:)

I found the solution! thanks!

Randomly when I plug my Iphone 4s into Itunes it will tell me that it can't detect my phone and that I need to restore it. It doesn't happen every time, but maybe every two weeks.

Randomly when I plug my Iphone 4s into Itunes it will tell me that it can't detect my phone and that I need to restore it. It doesn't happen every time, but maybe every two weeks.I restore it and then it works for a while, but then a couple weeks later I'll plug it in and I get the same message again. It's very frustrating because even though I have all the settings to save to cloud, my apps and data don't all come back.

Thank you both. I suppose I should have prefaced my question with the concern that I've read a number of other posts from people who have had a similar issue and when they tried to follow the directions, they ran into a multitude of other problems. As you might imagine, I'm hoping to avoid the creation of new problems as I try to solve this one. Thanks again.

How can I recover music from my ipod when its in 'need to restore' mode?

basically, my friends ipod is a old ipod classic and has about 7,000 songs on it and most of them are backed up in the ipod hard drive (like going to the ipod on my computer and organising the files there)
about 2 weeks ago certain songs would crash and the ipod wouls have to be restarted by holding menu + pause then not listen to that song, after a while of this it makes a loud clicking noise whenever it was turned on and all i see is the apple logo for about 5 minutes then it comes up with 'connect to itunes to restore',
once i manage to connect it to a laptop (it has always been annoying to connect) i restarts itself a couple of times, then shows ' connect to power screen ' and at this point the laptop hasnt recognised the ipod yet on itunes and my computer after reconnecting it a few times it will connect and start charging, itunes says that the ipod needs restoring and i cannot open it in my computer as it says i need to insert a disc and also the ipod screen doesnt have the red 'do not disconnect' symbol the screen is black and white and the symbols are a bit smaller and it looks like a disc mode or something? sorry i do not know what to refer to it as
the problem is i need to restore my ipod to help fix it and access my thousnads of files as many of the songs i could not find again, but i cannot get into any of files anyway
i was wondering if there are any ways i will be able to recover my files before i restore it as i have tried some recovery programs but my ipod never shows up on them but if a restore and update was necessary to recover files
by the way my friend borrows my laptop to put music on her ipod which she then deletes from my files afterwards and the ipod has been switched through different computers which the songs have been deleted from anyway
any advice would be greatly appreciated thank you!!!!!
xx

You will have to use a third party soft such as disk aid (digidna.net/products/diskaid) or iexplorer (macroplant.com/iexplorer)
Hope this helps

I need to restore an iphone 4 to 7.0.6 not the current 7.1

I need to restore an passcode locked CMDA iPhone 4 to 7.0.6 not the current 7.1. This is due to a mobile management application that our company uses that has not been verified to work with 7.1 yet. This iPhone is current on 5.1.0. I am trying to do the restore via iTunes and am using an old ipsw file for 7.0.6 but I keep getting the 3194 error when it tries to restore. I have tried all the "hosts" fil e suggestions but keep getting the same result. Is it no longer possible to restore an iPhone to an older version of iOS, even only one upgrade back??

Sorry, but it will only install the latest version (7.1).

HT201263 my iphone 4 wont come on although it does show the apple signal when plugged in. i need to restore it but dont know how

recently my iphone 4 shut down and wont come back on. when i plug it in to outlet or computer it shows the apple signal but still wont turn on. i need to restore to factory settings

Hello, Taylorlocke.
Thank you for visiting Apple Support Communities.
Here are a couple helpful troubleshooting articles that I would recommend going through. They will walk you through troubleshooting this issue.
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen. Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Jason H.

I have an original iPad and need to restore it to factory settings. It was loaned to me and I don't have a back up via iTunes. Can anyone tell me how to do it without iTunes back up?

I have an oritinal iPad and need to restore it to factory settings. I've followed the instuctions from the reset menu. When it powers back up it takes me to a screen indicating I need to attach it to iTunes. The iPad was loaned to me so I did not have a need to back it up. Can anyone help me restore the settings without connecting to iTunes?

Helpjere-
When you reset to factory settings, you erased all content and settings. That restored it to factory settings except that it kept the latest iOS update.
The person who loaned it to you can connect it to iTunes on their computer. They will be given the option to restore from their backup.
Fred

Need quick answer - need to restore filters...

Similar Messages

Maybe you are looking for