Need quick reply 4.2(1)SP1(5.1) on Nexus 1010?

We have most likely run into CSCtz74514 in 4.2(1)SP1(3) in a HA Nexus 1010 setup and need to upgrade. In the downloads I can find 4.1(1)SP1(5.1) for Nexus 1010. I have read through the release notes for 4.2(1)SP1(5.1). The only VSAs talked about are Nexus 1110-S and 1110-X
Is 4.2(1)SP1(5.1) really supported on a classic Nexus 1010 with 16GB ram or should we go for 4.2(1)SP1(4a)?
NTM-DC-VSA-01# show inventory
NAME: "Chassis", DESCR: "Nexus 1010 (Virtual Services Appliance) 2 slot Chassis "
PID: N1K-C1010           , VID: A   , SN: 1610440479132074267
NAME: "Slot 1", DESCR: "Nexus 1010 (Virtual Services Appliance)"
PID: N1K-C1010           , VID: A   , SN: QCI1533A662
NAME: "Slot 2", DESCR: "Nexus 1010 (Virtual Services Appliance)"
PID: N1K-C1010           , VID: A   , SN: QCI1533A7Q3
NTM-DC-VSA-01# show ver
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2011, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
loader:    version unavailable [last: loader version not available]
kickstart: version 4.2(1)SP1(3)
system:    version 4.2(1)SP1(3)
kickstart image file is: bootflash:/nexus-1010-kickstart-mz.4.2.1.SP1.3.bin
kickstart compile time: 7/8/2011 18:00:00 [07/09/2011 04:51:59]
system image file is:    bootflash:/nexus-1010-mz.4.2.1.SP1.3.bin
system compile time:     7/8/2011 18:00:00 [07/09/2011 05:16:25]
Hardware
cisco Nexus 1010 (Virtual Services Appliance) 2 slot Chassis ("Nexus 1010 (Virtual Services Appliance)")
   with 14304256 kB of memory.
Processor Board ID T023D701401
Device name: NTM-DC-VSA-01
bootflash:    3897832 kB
Disk Storage capacity for VM virtual disks: 346264 MB
Number of physical 1Gbps ethernet ports: 6

Thanks a lot Mathew! Would be nice if someone could update the install and upgrade guides so it's clear 1010 and 1010-X are supported as well as the 1110-S and 1110-X.

Similar Messages

Does the Canada ONLINE Apple store sell the unlocked iPhone 5 model "A1429 CDMA"? Need a quick reply please ..

Does the Canada ONLINE Apple store sell the unlocked iPhone 5 model "A1429 CDMA"? Need a quick reply please ..

http://www.apple.com/iphone/LTE/

Image persistence on New 24" LED Cinema Display - Quick Reply needed please

Hi
I have a new 24" LED Cinema display - delivered 14 days ago today (hence needing a quick reply!).
Yesterday I noticed image persistence down the entire left hand-side of the screen - should this happen on such a new display?
Should I return it / take it back?
Thanks for any advice.
For what it is worth the image persistence is the left-hand column of the iTunes window - I can read the entire column from the top where it says "Music" down to the "Selected item" that appears above the album artwork window.
I do use iTunes a lot but certainly nothing out of the ordinary and often in reduced size mode or behind other windows. (i.e it does not sit in the same place all the time).
Since I took the screen out of the box the screen-saver has been set to turn on after 15 mins and the Energy Saver is set to turn the screen off after 20 mins (i.e I have taken screen saving measures).
Finally, I have done the "display an all-white image on the entire display" as per here http://support.apple.com/kb/HT2807) and after six hours of this the problem has improved, but certainly not gone away.
So, to return, or not to return, that is the question.
Many thanks.
Rob
PS - I bought this online at Apple Store - if I do return it, could I do this in person at physical Apple Store, or do I have to do it online?

I've had this same problem on my 24" iMac for some time (it's still under my AppleCare warranty, but it began doing this long ago). I searched these forums a year ago and never found anything about this, so I'm glad I found these posts here today.
I guess it's time to haul mine back into the store. Also I note that my screen has developed some dark areas, as if the fluorescent backlight has become irregular.

HELP, need quick script fix

Hi,
Our InDesign is acting up here. We are designing massive amounts of tables for various annual reports. After the design for print is done, these tables need exporting to xHTML.
We have tested this extensively, and written complicated CSS files and many cell-styles to make it work.
The thing is, that now when the final test-export needs to be done. InDesign suddenly returns a Stack Overrun error message when exporting. The only thing that seems to happen is that we cut out each page, paste it into a new document, save, and then do the xHTML export. But we are talking hundreds of pages here.
My Apple script is not too good, but I am sure this can be done by a simple script. And I am quite sure it has been done before.
Can anyone here please point me in the correct direction.
PS. A bug report has been made to Adobe about this issue

Thank you for the quick reply. Smart ports look very cool. I like the idea and may find this useful for other purposes but if I am reading this right, it won't work for what I need. It looks like he would need to log into the switch to apply the macro. He is a phone guy and does not want to actually touch the switch. So I was looking for like a perl script of something that I could configure with my TACACS credentials. Also I won't know what port he needs reconfigured until he needs it, so I need him to be able to add the port number as a variable without him actually having to do any programming. he would be will to run it as part of a command (i.e run command.exe 10.10.10.22 g1/0/22 222, where 10.10.10.22 is switch IP, g1/0/22 is port, and 222 is the new vlan) or if I can do somekind of prompt that would be great!

Need quick script

Our phone guy is going to be replacing all the digital phones in our building with IP phones. On occaision, we may need to change the configuration on a port (voice vlan and trunk ports allowed). Is their a script I can write that will allow hime to put in the three variable (IP of switch, port, and required vlan) and the script will connect to that switch and place the new config on the port? It would have to login with my TACACS credentials. Any suggestions?

Thank you for the quick reply. Smart ports look very cool. I like the idea and may find this useful for other purposes but if I am reading this right, it won't work for what I need. It looks like he would need to log into the switch to apply the macro. He is a phone guy and does not want to actually touch the switch. So I was looking for like a perl script of something that I could configure with my TACACS credentials. Also I won't know what port he needs reconfigured until he needs it, so I need him to be able to add the port number as a variable without him actually having to do any programming. he would be will to run it as part of a command (i.e run command.exe 10.10.10.22 g1/0/22 222, where 10.10.10.22 is switch IP, g1/0/22 is port, and 222 is the new vlan) or if I can do somekind of prompt that would be great!

Losing active text in new quick reply

I am reading email, I receive a text in new pop up window, I start typing quick reply, the person sends another text, thr new text overwrites the previous box, I cant find everything I started typing!!

So, I figured out that some time on Thursday, 17 January (for me, at least) Yahoo! email began disallowing those of us who choose to use Mozilla Firefox (17 or 18) with tracker blockers like Ghostery and AdBlock Plus's Fanboy's Tracking List from sending outgoing email. Any email to which I replied was populated with the phrase
"Yahoo! Mail found the original email, but encountered problems displaying it. Please try again later."
and I could not even address, let alone send, a new email.
I'm not yet sure which particular trackers I needed to allow so that I can send outgoing email, but I do know that if I whitelist "mail.yahoo.com" in Ghostery and turn off AdBlock Plus's Fanboy's Tracking List, then I can again send email via Yahoo! email. Probably ScoreCard Research and Right Media need to be allowed, since those pop up in every Yahoo! email, but I'm sure there are others with which Yahoo! wants to track their users.
I'm not sure why they would do this, other than the obvious, to track their users. But there are repercussions that will cost them. I was happy to see SSL implemented recently on Yahoo! email, but after this move, they've made me search for a new, reliable, secure email service for the first time since the 90s, and when I find one (suggestions?), I'll never think about Yahoo! again.

Building a "Quick Reply" plugin for Mac Mail???

Anyone know where I can find someone to develop a plugin for Mountain Lion Mail that replicates the "Quick Reply" feature from Sparrow mail? (ref: http://michaelwender.com/blog/2012/07/18/sparrow-mail-app-quick-reply-is-my-favo rite-feature/)
Anyone even know if it's feasible/possible? Not sure why Apple isn't all over this one, but it probably violates some usability Zen law or something. I happen to really like it. Anything that makes me FASTER on email is good.

I couldn't agree more, with everything you said. Sparrow has been bought by Google and development ceased. www.fluent.io looked even better, but they've just shut down. I think even Microsoft at www.Outlook.com have the same thing.
We really need this Quick Reply functionality for Apple Mail. And integration of Facebook into the same 'news feed' style presentation of emails. It's the way ahead. Apple need to be all over this.

I'm trying to open the latest i-tunes but it keeps saying I need quick time 7.5 or higher

I'm trying to open the latest i-tunes but it keeps saying I need quick time 7.5 or higher (which I do) and I have no updates available for quicktime

QuickTime 7.5.5 for Leopard - http://support.apple.com/kb/DL27
QuickTime 7.7 for Leopard - http://support.apple.com/kb/dl761
= New version of Quicktime installed but application reports it needs to have that version installed =
Open Application > Utilities > System Profiler and check the Quicktime version in Frameworks vs. the version in Applications. One person had re-installed their operating system. It had kept the newer Player application but had reverted to an earlier version of the underlying support framework files which many applications utilize. Re-installing Quicktime 7.7 took care of the problem. Do this manually, not with Software Update.
Installation get stuck at "configuring installation" - https://discussions.apple.com/thread/2592979?threadID=2592979 - uninstall Quicktime before installing.

Why do I need Quick time 7 and Quicktime 10 ?

I have just migrated from iMac5 (2.16 GHz) Mac OS 10.4.11 Quicktime 7.6.4 to a new imac 3.06 Mac OS 10.6.2 Quicktime 10.0.
Some of my quicktime files play ok but others prompt me to download quicktime version 7. Why do I need to do this ? (There seem to be a lot of problems with this looking at the forums). All the files play on the old mac. Why isn't Quicktime forward compatible or why is there no import facility so that you can make your old files compatible ?
Or am I missing something ?

Some of my quicktime files play ok but others prompt me to download quicktime version 7. Why do I need to do this ?
Because your system thinks you are missing specific codecs required for the playback of certain compression formats. In some cases this may be an installation problem in which the codec was "lost" or "orphaned" during the update process. In others it may be a need to update the component to work properly under the dual QT X/7 framework installed under the Snow Leopard OS. You need to check the Inspector/Finder Info or similar window to determine what specific codec is causing the problem and then re-install or update that specific codec/component/package.
(There seem to be a lot of problems with this looking at the forums).
Most of the problems are "self-inflicted" by individuals who, rather than studying the problem symptoms, analyzing them to determine their cause, and then fixing the problems, elect to immediately delete and re-install software -- often attempting to mix components from different operating systems and/or update versions of the software in their haste.
All the files play on the old mac. Why isn't Quicktime forward compatible or why is there no import facility so that you can make your old files compatible?
I am running both Leopard and Snow Leopard variations of QT v7.6.6 and all of my "old" files have remained compatible -- to include MPEG-2 video and a limited number of third-party supported compression formats. Since my configurations continue to work properly, my first guess is that you have an unresolved configuration problem or inability for your QT X 64-bit routines to communicate/switch properly with the 32-bit routines as required for your content.
Why do I need Quick time 7 and Quicktime 10?
Technically, you probably don't. However, as an old QT 7 Pro user who likes many of the QT 7 Player controls/options/features better than QT X's new but more basic features, I maintain both in active service and tend to use QT 7 as the default player of most of my work flows. Still, this is up to the individual. I am in no hurry to rush the changeover from an older but still more reliable QT technology to a more modern, but as yet, less mature and well tested "new" QT technology. In short, I feel it best to make the most of both dispensations during the development of this "new" version of QT.

HT4743 tv show will not play. Says I need quick time

Watched half of Bates motel epi and then it stops and says I need quick time. I have a macbook air. Makes no sense.
Thanks.
Dave

Hi..
Try the troubleshooting help here > Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues

I need quick time 7.5.5 for itunes.How to repair problem of installation?

I have mac leopard 10.5.5 powerpc and I have itunes 10.6.3.
Itunes need Quick Time 7.5.5 or more.
I tried to install quick time but there is a problem of instalation.
How to repair problem of installation of Quick Time?

Some specific downloads of QuickTime:
7.5.5 for Tiger
7.6 for Tiger
7.6.4 for Leopard
7.7 for Leopard
Since you have Mac OS X 10.5, Leopard, it would probably be better to use one of those Leopard-specific downloads.

Blank page with quick reply on all mybb forums, the same thing was with Fire fox 3.0.1?

blank page with quick reply on all mybb forums, the same thing was with Fire fox 3.0.1?
== URL of affected sites ==
http://world.alnel.com

I know we already had this feature, but it was through a modification, not an official feature. It is now an official feature and it is implemented quite well in my opinion. Also new - you can now modify the title/subject of threads that you posted right from the forum display - just click and hold on the link to the thread, and it'll change to a textbox. Then just click out of the box or hit enter to save!
[url=http://www.micrositez.co.uk/link-building-packages.html] Link Building[/url]|[url=http://www.micrositez.co.uk/link-building-packages.html] Link Building Services[/url]

New forum version: better search, quick reply, new...

Hi all,
I'm happy to let you know that we're now using the latest version of our forum software.
You've probably noticed that there's a few design updates and changes. We in the Discussions team would love to get your feedback on any changes - but please digest the design for a few days before you decide whether you like it or not
This new version enables a lot of new features that we will be rolling out in the next months, the most important being a mobile-optimized version. The target for that is in April.
The bad news is that we are having some small compatibility problems on some of the websites where this forum is available, and some of the features don't work properly on them. On some, everything works pretty much as intended. See below for details.
Here are some of the most important changes:
1) Improved search:
The forum search is now giving you suggestions about threads that match your keywords. Try it out and see if you can now find things faster.
2) Better visibility for RSS:
This is not really an update, as it's always been possible to create a RSS feed for any keyword - but now it's easier to subscribe as there's a RSS icon in the search results. This was one of my pet peeves in the previous versions and I'm happy to see this great little feature now getting the promotion it deserves.
3) Quick reply:
You can now reply to a post directly from the thread view. Due to the problems we have on some Nokia sites, this is disabled by default - but you can turn it on for yourself from Edit my Info -> Preferences -> Display -> Turn on Quick reply (last item on the list).
Note that if you use this forum via the Nokia websites for Europe / UK / Australia or USA, using quick reply gives you an error message. But the post was still made and a page refresh will show it. If you click on "post" several times, you'll make duplicate posts.
Nokia sites in Asia (nokia-asia.com) / Ireland and MEA (mea.nokia.com) do not have this problem and quick reply works better there. You can use any of these sites to access this forum.
Also, giving kudos on those four problem sites gives an unnecessary error message. Just refresh the page and you'll see that the kudos was in fact given.
We're sorry about these errors and try to get them resolved soonest for all sites.
4) Get an email when someone sends you a private message
This is pretty obvious. Too bad the email does not show the message content - or who sent it - so you'll have to login to the forum to read it, but at least you'll know you have a new PM.
5) Personalization options
You can now customize how this forum looks and change your preferences such as how many posts appear per page and so on. I haven't tried all the combinations so I don't even know how much freedom there is, but just try it out for yourself.
There are a few acute issues that we are aware of, such as
- the new green kudos button might be difficult to understand for new users
- some fonts may be too small or to big
- Google Chrome does not show the site correctly
- using a phone to access the forum gives a messy design
and we are working on these issues with the forum software provider.
But I would love to hear your overall feedback and any ideas or complaints you may have!
Best regards,
vandelay + the Nokia Discussions team
I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".

Hi,
I am a new member of this forum as well and spent a lot of time looking for more information about the problems or improvements to my specific phones. I have been searching for a place to drop some suggestions but couldn't find any. Just like MartinMiller35 suggested a few posts before, it would be lot easier and faster when the mobile product sections would break down more in to sort by device and then into the existing sections of software/suites/ music/video`s/ maps/applications etc.
I also agree with fender77, it would make such a difference as people would describe the problem in addition to their device better. It might be helpful if any solution working fine for phone "X " could be placed into other sections where the people are having the same problems and crying out for a solution, not aware that in another post or maybe even in a different category there is already an answer for their phone "y".
To avoid more (misplaced) threads, posts I suggest there could be a "tips and tricks or how to" section per phone, like the "Top Questions for..". Maybe the moderators (or anybody else who has rights can copy same solution in the multiple sections.
For example I`ve had problems getting my maps working on my "old" phone, I`ve been searching on "N95 8GB maps" didn't`t get me any recent solution or didn't describe the problems or state (latest info re fw or compatibility). After again a different search I`ve found a working solution but under "Ovi and Mobile Media", "Maps, Navigation and GPS..
I saw a header that described "my problem" but it was a different phone, even from a different series, it was a solution for the Eseries (to be precise it`s the post E75 Maps updater error cannot get enough information about the phone..." ) so I started reading, not sure if I was wasting time. After a few pages I still wasn't`sure if it would also work on my phone. It would have been a lot easier and I would be more certain of a working solution if it had shown directly under the section for my phone. I know the solution is applicable for a lot other phone`s, just adding the solution into those phone`s section could reduce the number of misplaced or even frustrated posts.
I have been going through a lot of posts but hesitated to use or comment or answer simply just because I`m not sure if the (menu)settings or OS, fw etc. are same or compatible and I wouldn't want to misinform anybody, cause any damage and simply don`t have the time to investigate other devices specs further.
Again for example I read about problems with N97 mini or the N97 but again I don`t know if they apply to mine N97 as I`ve had a "newer" one where a lot of "the old" problems seem to be more or less resolved. Now after having 3 N97`s returned to the store in 3 weeks time!! I have a right to change to a different device so I`m searching again. It would make my search a lot easier if i could see all the problems and solutions for the N97, the N97 mini and N900 at their own section (to have a better comparison in case I decide to change the device, new N97 is expected to arrive to store next Monday, until then I`m searching/comparing).
I`m also looking into nokia messaging and HTML solutions for my N95 8GB and future Nokia device (guess it will be another new, hopefully working flawlessly N97) maybe there is already an answer but I don`t know cause it is under the E72 or X6 solutions..
I`m sorry if this isn't the or my place to make suggestions or if I suggested something that has already been used in the past and wasn't working at all.
This forum has helped me better than the Nokia site or the Nokia Care and I hope it will keep helping us.
Keep up the good work!!
Thanks for taking the time to read

Need to update Exchange 2010 to SP1 from base

I need to update my base install of Exchange 2010 to SP1 and eventually SP2. This sits on a 2008 R2 server. in reading other upgrade articles, there are references to needing hotfixes at the server level - 2008 R2. There are about 5 hot fixes referenced
to upgrade to SP1 and I would assume there are a few others for the update to SP2.
Currently the 2008 R2 server is patched via Windows update through February 2014 (including SP1 for the server). Given that, can I assume that the hot fix updates have been incorporated into other updates/patches along the way for the Windows 2008 R2
server? Or do i still have to install each of those hotfixes manually?
Also, in one of the patches, it spoke of needing, or using .net framework 2.0 and 3.51. currently my system has 4.5.1 on it. do i need 2.0 and 3.51 for SP1 to be installed and work correctly?
thanks
dave

Hi Dave,
I recommend you install Exchange 2010 SP3 directly. There is no need to upgrade to Exchange 2010 SP1 and then to SP2.
Service Packs are cumulative, Exchange 2010 SP3 include all fixes included in previous RUs and service packs. Here is a blog for your reference.
Released: Exchange Server 2010 SP3
http://blogs.technet.com/b/exchange/archive/2013/02/12/released-exchange-server-2010-sp3.aspx
Since Windows updated through February 2014, you don't need to install each of those hotfixes manually.
Besides, I would like to verify if you download .net framework 4.5.1 from website. There is no need to install it that way. You just need to open Server Manager, add .Net Framework 3.5.1 feature.
Hope my clarification is helpful.
Best regards,
Amy
Amy Wang
TechNet Community Support

Please help: Quick Reply recipients for a group text

Hello! Thank you for your response.
For the Quick Reply feature when texts are set to "alert", it seems to always show who sent the most recent text. If this person sent a message to both you and a third person, is there a way to set the Quick Reply feature to show both names that you are responding to?
Or, to verify if I am responding to a single person or a group text, must I always choose "Close" and then open Messages?
Thanks again!

jGuru has an excellent tutorial called Effective Layout Management which tackles exactly the questions you are asking. Read it at http://java.sun.com/developer/onlineTraining/GUI/AWTLayoutMgr/index.html
Regards,
Brian

Need quick reply 4.2(1)SP1(5.1) on Nexus 1010?

Similar Messages

Maybe you are looking for