Need R&R discs for Z60m

can i ask for rescue and recovery disc of my unit Z60m?
Message Edited by nonny on 12-20-2008 11:43 PM

Welcome to the forum!
You can call Lenovo and order a set, but be aware that they don't have to sell them to you if the machine is out of warranty.
Next stop, if that fails, is eBay.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

Do I need a blank disc for bootcamp? Or could I use a Flash Drive?

Do I need a blank disc for bootcamp? Or could I use a Flash Drive? Thanks

Use the Boot Camp Assistant to create a CD or USB media to install the latest Boot Camp drivers for your computer. You should get the newest drivers available any time you install Boot Camp.
Install Windows with an installation disc you provide or—on some Mac computers—with a USB flash drive that contains a Windows 7 ISO image downloaded from Microsoft. The Boot Camp Assistant helps you burn the image to the flash drive.

I need the startup discs for a G5, where do I get them?

We purchased an older G5 and do not have the discs that came with it. My MacBook Pro is to advanced. Help. We can only use it in Safe Mode right now....

Call AppleCare.
That said:
1. If they can give you the original discs, that's ideal if you need access to Mac OS 9 applications 9 (pre-2001).
2. If they can give you the equivalent of Mac OS X 10.5 retail, you can upgrade to 10.5.8 combo, and that's the end of the line for that machine. The 10.5 discs that come with another Mac will not work with the machine.
3. Make sure they don't try to give you discs for another Mac. Read the serial number off the foot of the machine to help them, or at least the EMC#.

Do I need labview drvier disc for using VISA?

Hi,
Do I need to install the labview driver disc for using VISA (virtual serial port) function? I get the error as the picture? I have no clue what happen.
thanks
====================
=Labview 7.0 & 8.0 & 8.5=
=====================
Attachments:
labview8.JPG ‏22 KB

my aim is to use my bluetooth enable notebook (no serial port) to control a bluetooth serial port adapar on a circuit.
That means "only a bluetooth serial port adapar" is in the whole project. I need to use my notebook bluetooth to control the bluetooth serial port adapar output in the independent circuit, any suggestion?
I think I need to control a "virtual serial port" and then send the "virtual serial port" data via bluetooth, then use those bluetooth infromation to control the independent circuit
Message Edited by zmarcoz on 02-16-2008 03:05 PM
====================
=Labview 7.0 & 8.0 & 8.5=
=====================

I need a startup disc for a 722c

I lost my startup disc for a hp722c. Is there somewhere I could get a replacement? thanks
This question was solved.
View Solution.

Hello 2boot.
Currently, there's nowhere you can get a replacement for the driver CD. You can download drivers from the hp web site. From this link, you can select your operating system and download a driver for your computer.
Cheers!
Wixma.
I am an HP employee.
Say thanks by clicking the Kudos star in the post.
If my reply resolved your problem, please mark it as as Accepted Solution so that it can be found easier by other people.

Do you need a Windows Disc for parallels?

Do you need a Windows disc to run parallels on your Mac?

It also needs to be XP SP2. If you have a legal copy of an earlier version, you can slipstream an SP2 disc, but you will need a PC to do so.
http://www.winsupersite.com/showcase/windowsxpsp2slipstream.asp

Do I need Vista boot discs for a new hard disc if I am installing 7?

I am trying to install a new hard disc on an old laptop. The laptop is an Hp pavillion dv 6700 with vista. I want to install an WD SATA hard disc (the original is going bad). I do not have the Vista boot discs but I do have a new Windows 7 Ultimate disc. I tried to install and all it says is "operating system not found". Do I need the vista boot discs? Do I need to update the bios? I just don't understand why it will not work. I am a novice in computers but really don't want to keep pouring money in an old laptop by taking it to a pro and spending a couple hundred bucks just to do this. I have already spent enough...Any help would be greatly appreciated!

Sorry about the oversight.
It shouldn't matter what bootable disk you throw at it, it should boot.
Doesn't sound like anything will work since you have tried all avenues.
The problem your notebook seems to be having is the only device it will boot from is the hard drive, and since nothing is on it, you get the error.
The only other thing I can think of is to do a hard reset of the notebook.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
There is only a windows-based flash file so you can't do a BIOS update with no OS installed, and you can only flash the BIOS in Vista or you will brick the notebook.

I Need Help Installing An Update Disc For My Mac Mini, Currently On 10.5.8 And Want To Install The Snow Leopard Upgrade Disc From The Apple Site. Can Anyone Help?

Hi, I Am Trying To Upgrade My Mac Mini To Snow Leopard And I Have Brough The Retail Disc That They Sell On There Site. The Instructions Say To Insert The Disc And Follow The On Screen Instrutions But When I Put The Disc In; It Spins The Disc For About 30sec - 1min Then It Ejects The Disc. If There Is Any Information You Need To Get A More Clear Picture Please Ask

At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4
Open Activity Monitor>Disk Usage tab, Show:>All Processes, sort on CPU%, how much Free Space is used?

I need a new recovery disc for my MacBook help ASAP!!!

I need a new recovery disc for my MacBook so I can format and re-install the default operating system. I have lost the original recovery disc that came with my MacBook years ago. Can anybody tell me how and where I can order one from?
Also, I do have the original recorvery disc that came with my MacBook Pro, could I not just use this or would it not be compatible?
Help ASAP please...
Thank you!

For a fee, you could likely order a replacement install-restore DVD for your MacBook. To get the correct disc(s) and match the hardware to the system, you need to know and have the serial number of the product handy, and be able to answer some basic questions; and have a form of payment, such as credit card.
Call the Apple Store online (main US number, 1-800-MY-APPLE) or the main Apple Support number for US, 1-800-275-2273.
Or if you're in another country, you could try calling a Local in-country support number and ask, since they may have to redirect your call to another associate. See link below for Support phone numbers.
An operating systems specialist or other qualified person will be able to try & help obtain the correct disc or disc set; if the computer original gray-label set is no longer available, they may be able to check their extensive database against your product serial number to see if they may have another full install disc that can work.
This other option, if it happens, based on your MacBook serial number and build model identifier, could be slightly newer than the OS X version shipped with the MacBook, and not be gray-labeled.
A replacement install disc in retail version would not include any original MacBook applications, while a gray-label disc set should have most of them as part of a multiple DVD set, if available.
•Contact Apple for Support & Service
http://support.apple.com/kb/HE57
Hopefully this helps resolve the issue.
Good luck & happy computing!

I need a copy of a disc for the wrt54g im have trouble ge...

I need a copy of a disc for the wrt54g im have trouble getting on my wireless router i was on and now i dont please help me

Go here to download your Linksys Program. This is more up to date then the CD anyway. You can always make a CD with the program too.
http://www.linksys.com/servlet/Satellite?c=L_CASupport_C1&childpagename=US%2FLayout&cid=116685983731...

I am in need of the basic Sony PEGNX70-V Download disc for a computer. How do I get one? Thanks

I am in need of ther basic Sony PEGNX70-V software download disc for a computer. How do I get one? Thank You.

Hello Ken.
The installation CD for your CLIE is no longer available for sale. Sony has stopped all development and manufacturing of new CLIE products back in May 2004.
As the Parts and Accessories sells out of stock on CLIE accessory items, they are not being replaced. At this time there is no plan to re-introduce the CLIE Handheld or accessories for sale.
Note: If my post answers your question, please mark it as an "Accepted Solution."

I have a disc for Photoshop CS-6 and entered the redemption code; system says I'm all set and a serial number is not needed. Install program on disc will not proceed without serial number.

I have a disc for Photoshop CS-6 and entered the redemption code; system says I'm all set and a serial number is not needed. Install program on disc will not proceed without serial number. How do I resolved this Catch-22?

Redemption Code Help
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

I have notebook hp hdx16 and i need i recovery disc as i lost mine so please can u send for me

HP HDX X16T-1200 CTO Premium Notebook PC
i have this notebook
and i looking for recovery disc for my computer

Hi:
Please read the info at the link below and see if a set can be ordered.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&tmp_task=solveCategory&cc=us&dlc=en&lan...
If not, you can install W7 following the guidance below if you can read the 25 character W7 product key on the Microsoft COA sticker on your PC.
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn as ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Paul

I need to re install my printer to my laptop, but lost the disc for MX410.

I need to re install my printer to my laptop, but lost the disc for MX410.

Hi morineb,
The latest drivers for the printer can be downloaded from the Canon USA website. Please click here to go to the Drivers and Software page for the PIXMA MX410. Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "RECOMMENDED DOWNLOADS" section and click the MP drivers file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once you have downloaded the MP drivers file, please double-click on it and follow the prompts to reinstall the printer on your computer.
Hope this helps!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Need Win 7 recovery discs for new hard drive

I am not sure which Windows 7 Operating system my laptop had, but I need the recovery discs to put Windows 7 back on my HP dv6-6167cl notebook.
My original issue was that my notebook was unable to restore or anything on its own. After calling HP support and performing a guided diagnostics test, it was determined that my hard drive was bad. I purchased a new hard drive and replaced it, but need to get Windows 7 back on it.
Thanks!
This question was solved.
View Solution.

Hi,
Your notebook originally shipped with Windows 7 Home Premium 64bit - you can order a replacement set of Recovery Media from the link on your Product Page below.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5118...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Need R&R discs for Z60m

Similar Messages

Maybe you are looking for