Need really urgent help from anyone

Hi ,    
We are implementing sip in our business and we tested the dummy numbers on sip it is working fine.
When we test our main numbers it is not working for incoming or outgoing calls. it is  giving sip error error 404.
I am using CUCM 8.6.2
Any ideas.
Oct 12 03:52:23.198: //418747/863B1AC6BE1B/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x2BCB7F60
State of The Call        : STATE_DEAD
TCP Sockets Used         : NO
Calling Number           : 0861036261
Called Number            : 0893640881
Source IP Address (Sig  ): 123.102.100.34
Destn SIP Req Addr:Port  : 123.102.30.131:5060
Destn SIP Resp Addr:Port : 123.102.30.131:5060
Destination Name         : 123.102.30.131
Oct 12 03:52:23.198: //418747/863B1AC6BE1B/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream             : 1
Negotiated Codec         : g711alaw
Negotiated Codec Bytes   : 160
Nego. Codec payload      : 8 (tx), 8 (rx)
Negotiated Dtmf-relay    : 6
Dtmf-relay Payload       : 101 (tx), 101 (rx)
Source IP Address (Media): 123.102.100.34
Source IP Port    (Media): 26776
Destn  IP Address (Media): 58.105.248.129
Destn  IP Port    (Media): 55094
Orig Destn IP Address:Port (Media): [ - ]:0
Oct 12 03:52:23.198: //418747/863B1AC6BE1B/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC)    : 1
Disconnect Cause (SIP)   : 404
Oct 12 03:52:27.038: //418717/84AF9822BDCD/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x2BC63A50
State of The Call        : STATE_DEAD
TCP Sockets Used         : NO
Calling Number           : 0478403561
Called Number            : 0893640881
Source IP Address (Sig  ): 123.102.100.34
Destn SIP Req Addr:Port  : 123.102.30.131:5060
Destn SIP Resp Addr:Port : 123.102.30.131:5060
Destination Name         : 123.102.30.131
Oct 12 03:52:27.038: //418717/84AF9822BDCD/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream             : 1
Negotiated Codec         : g711alaw
Negotiated Codec Bytes   : 160
Nego. Codec payload      : 8 (tx), 8 (rx)
Negotiated Dtmf-relay    : 6
Dtmf-relay Payload       : 101 (tx), 101 (rx)
Source IP Address (Media): 123.102.100.34
Source IP Port    (Media): 18150
Destn  IP Address (Media): 58.105.248.129
Destn  IP Port    (Media): 44382
Orig Destn IP Address:Port (Media): [ - ]:0
Oct 12 03:52:27.038: //418717/84AF9822BDCD/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC)    : 16
Disconnect Cause (SIP)   : 487
Oct 12 03:52:27.042: //418721/84AF9822BDCD/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x2BCBD950
State of The Call        : STATE_DEAD
TCP Sockets Used         : NO
Calling Number           : 0478403561
Called Number            : 0893640881
Source IP Address (Sig  ): 123.102.100.34
Destn SIP Req Addr:Port  : 123.102.30.131:5060
Destn SIP Resp Addr:Port : 123.102.30.131:5060
Destination Name         : 123.102.30.131
Oct 12 03:52:27.042: //418721/84AF9822BDCD/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream             : 1
Negotiated Codec         : No Codec
Negotiated Codec Bytes   : 0
Nego. Codec payload      : 255 (tx), 255 (rx)
Negotiated Dtmf-relay    : 0
Dtmf-relay Payload       : 0 (tx), 0 (rx)
Source IP Address (Media): 123.102.100.34
Source IP Port    (Media): 19128
Destn  IP Address (Media):  -
Destn  IP Port    (Media): 0
Orig Destn IP Address:Port (Media): [ - ]:0
Oct 12 03:52:27.042: //418721/84AF9822BDCD/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC)    : 16
Disconnect Cause (SIP)   : 487
Oct 12 03:52:27.502: //418722/84F0E7CCBDDA/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x2BC8AFE0

Hi Rohit,
CUCM releasing the call because it's unable to find the called number received i.e. called number does not exist in dial-plan.
Check below points:-
1). Check the CSS on the SIP trunk in CUCM (may be called number is not accessible due to incorrect CSS).
2). Check the translation pattern and it's CSS.
3). If you are not using translation pattern then check for the translation profile in router config. In this case you can check and share your running-config and debug voice dial-peer or debug voice ccapi inout.
Regards,
Nishant Savalia

Similar Messages

  • Hi I need one urgent help from anyone

    Hi,
    I am looking some SAP HR ABAP objects its very urgent i need to give resume to one of the employer. The object may some what related to this requirement .Or send any HR ABAP Object its very urgent guys.....
    Rewards will sure..........
    (automate an interface between one of client’s telecommunications providers and R/3, parsing incoming data in a UNIX format to create FI/CO postings and reports out of R/3.)
    Thanks and Regards
    Ramesh

    Hi Rohit,
    CUCM releasing the call because it's unable to find the called number received i.e. called number does not exist in dial-plan.
    Check below points:-
    1). Check the CSS on the SIP trunk in CUCM (may be called number is not accessible due to incorrect CSS).
    2). Check the translation pattern and it's CSS.
    3). If you are not using translation pattern then check for the translation profile in router config. In this case you can check and share your running-config and debug voice dial-peer or debug voice ccapi inout.
    Regards,
    Nishant Savalia

  • Need an urgent help from all experts out there.....

    hi cud u ppl pls help me out...the problem is that i m getting training in unix at ibm.....though i m interested in java...so the dillema is that shall i get into unix....is it worth gettin into it..n is the future secure with it.....pls reply as early as possible
    thanks......
    regards
    monika

    hi cud u ppl pls help me out...the problem is that i
    m getting training in unix at ibm.....though i m
    interested in java...so the dillema is that shall i
    get into unix....is it worth gettin into it..n is the
    future secure with it.....pls reply as early as
    possibleHi Monica,
    If I were you I would get my computer serviced because it has a faulty keyboard. The '.' key seems to stick down whenever used, the Caps key does not seem to work at all and many keys seem only to work intermittently.
    Overall it makes your posting just about impossible to read.
    Sabre

  • How to convert PO sapscript layout to pdf - need VERY URGENT Help

    Dear All,
    Requirement: PO sapscript layout after some modifications (say, ZMEDRUCK) has to be converted to pdf. Through me9f user will be able to give ranges of PO numbers and can view the print preview for the po. After that on clicking the print button we get the printout of the pos one after another based on the user input of PO numbers.
    Our requirement is that when the user will click on the "Print Preview" of po (rather than pressing the print button) it i.e. PO sapscript layout has to get converted to pdf.
    If you have already encountered this scenario, could you please send me the source code regarding this at the earliest. If you want to email it to my personal id, please let me know so that I can give it to you. Thank you.
    It will be very beneficial for mine if you can send me some source code in this regard. (FYI. We want only “Print output” of PO sapscript. So, Print Program /SMB40/FM06P [after copying it to our ZSMB40/FM06P program] need to be modified for downloading the PO into PDF where there is no FMs like OPEN_FORM, WRITE_FORM, CLOSE_FORM. So already available source code in SAP forums can not help me.)). Kindly help me at the earliest. It’s VERY URGENT…
    Thank you.
    Thanks & Regards
    Sudipta

    Hi Chaith,
    Could you please provide me the source code regarding this at the earliest.
    We want only “Print output” of PO sapscript. So we need to modify only the Print Program SAPFM06P after copying it to ZSAPFM06P for downloading of modified PO (ZMEDRUCK) sapscript layout into PDF.
    I am already having some source code from sdn portral. I am attaching it herewith. But it's not working as some constants and variable values need to be given. We want to take download of PO into PDF from ME9F transaction itself.
    Could you please provide necessary values in the missing constants and variables and kindly resend the corrected modified Source code to me so that I can run the same code to  download the modified PO ZMEDRUCK into PDF . Need YOUR URGENT HELP...
    DATA: l_druvo LIKE t166k-druvo,
            l_nast  LIKE nast,
            aux_nast LIKE nast,
            l_from_memory,
            l_doc   TYPE meein_purchase_doc_print,
            ent_screen TYPE c,
            ent_retco TYPE i,
            toa_dara TYPE toa_dara,
            arc_params LIKE arc_params,
            aux_form LIKE tnapr-fonam.
      DATA: otf LIKE itcoo OCCURS 0 WITH HEADER LINE,
            lt_docs      TYPE TABLE OF docs,
            pdf_bytecount TYPE i,
            nom_archivo TYPE string.
      aux_form = 'ZMEDRUCK'.
      l_from_memory = c_true.
      SELECT *
        FROM nast
        INTO aux_nast
        UP TO 1 ROWS
        WHERE kappl = c_po     " Purchase Order
        AND   objky = t_datos-ebeln
        AND   aktiv = space
        ORDER BY erdat DESCENDING eruhr DESCENDING.
      ENDSELECT.
      aux_nast-sort1 = c_swp.
      CLEAR ent_screen.
      CLEAR ent_retco.
      IF aux_nast-aende EQ space.
        l_druvo = c_1.
      ELSE.
        l_druvo = c_2.
      ENDIF.
    l_druvo = '2'.
      CALL FUNCTION 'ME_READ_PO_FOR_PRINTING'
        EXPORTING
          ix_nast        = aux_nast
          ix_screen      = ent_screen
        IMPORTING
          ex_retco       = ent_retco
          ex_nast        = l_nast
          doc            = l_doc
        CHANGING
          cx_druvo       = l_druvo
          cx_from_memory = l_from_memory.
      CHECK ent_retco EQ 0.
      CALL FUNCTION 'ECP_PRINT_PO'
        EXPORTING
          ix_nast        = l_nast
          ix_druvo       = l_druvo
          doc            = l_doc
          ix_screen      = ent_screen
          ix_from_memory = l_from_memory
          ix_toa_dara    = toa_dara
          ix_arc_params  = arc_params
          ix_fonam       = aux_form                            
        IMPORTING
          ex_retco       = ent_retco.
      CLEAR otf.
      CALL FUNCTION 'READ_OTF_FROM_MEMORY'
        EXPORTING
          memory_key   = l_nast-objky  " PO Number
        TABLES
          otf          = otf
        EXCEPTIONS
          memory_empty = 1
          OTHERS       = 2.
      CALL FUNCTION 'CONVERT_OTF_2_PDF'
        IMPORTING
          bin_filesize           = pdf_bytecount
        TABLES
          otf                    = otf
          doctab_archive         = lt_docs
          lines                  = pdfout
        EXCEPTIONS
          err_conv_not_possible  = 1
          err_otf_mc_noendmarker = 2
          OTHERS                 = 3.
      CONCATENATE c_dest t_datos-ebeln c_ext INTO nom_archivo.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          bin_filesize = pdf_bytecount
          filename     = nom_archivo
          filetype     = c_bin
        IMPORTING
          filelength   = pdf_bytecount
        TABLES
          data_tab     = pdfout.

  • Kindly advice me, I have iphone 5s and I forgot the log-in password (passcode), I tried to open it but my phone give 60 min. to let me try after I fail for first one. I dont sync. with icloud or itunes. Please I NEED YOUR URGENT HELP!!

    Kindly advice me, I have iphone 5s and I forgot the log-in password (passcode), I tried to open it but my phone give 60 min. to let me try after I fail for the first one. I dont sync. with icloud or itunes. Please I NEED YOUR URGENT HELP!! MY IPHONE IS STILL STUCK.

    I can't, look at this image

  • Need very urgent help

    Hi every1,
    i am in a very bad situation as i am very new to AS3, so i
    need some help from any one who can help me out of this.
    I have created a FLV Player using FLVPlayback Component
    everything is working fine but the only problem is the rewind and
    forward button behaves very strange when i test it on web page
    residing in a webserver.
    In brief i want to say that the rewind and forward control in
    the application works alright when i play it in my local machine
    but when i take the file to a web sever and play it the controls
    behave very strange (when i click on the forward and rewind button
    it just takes me to the end of the movie and to the start of the
    movie at one shot which should not be the purpose of the rewind and
    forward button).
    So, somebody please look at my code below and i will be very
    thank full to the person who can send me the correct code.
    The code for the rewind and forward control is higlighted in
    the below code. please help... .very urgent..........
    import fl.video.*;
    var flvSou:String;
    var dynText:String;
    myflv.autoPlay = true;
    onscreen_play_btn.visible = false;
    onscreen_replay_btn.visible = false;
    if (myflv.playing) {
    onscreen_play_btn.visible = false;
    onscreen_replay_btn.visible = false;
    //myflv.source = "Call_to_action.flv";
    myflv.source = root.loaderInfo.parameters.flvSou;
    dynTxt.text = String(root.loaderInfo.parameters.dynText);
    slash_txt.text = "/";
    myflv.playPauseButton = playPause_btn;
    myflv.stopButton = stop_btn;
    myflv.muteButton = mute_btn;
    myflv.volumeBar = volume_bar;
    myflv.volume = .6;
    myflv.forwardButton = forward_btn;
    myflv.backButton = back_btn;
    myflv.seekBar = seek_bar;
    myflv.bufferingBar = buffering_bar;
    myflv.fullScreenButton = fullscreen_btn;
    //========================= Actions for Button Controls
    =========================//
    //========================= Actions for Play and Pause Button
    =========================//
    playPause_btn.pause_mc.addEventListener(MouseEvent.CLICK,
    clickHandlerPause);
    function clickHandlerPause(event:MouseEvent):void {
    //trace("clickHandler detected an event of type: " +
    event.type);
    //trace("the event occurred on: " + event.target.name);
    trace("u clicked pause button");
    onscreen_play_btn.visible = true;
    //myflv.alpha = .5; // uncomment later
    playPause_btn.play_mc.addEventListener(MouseEvent.CLICK,
    clickHandlerPlay);
    function clickHandlerPlay(event:MouseEvent):void {
    //trace("clickHandler detected an event of type: " +
    event.type);
    //trace("the event occurred on: " + event.target.name);
    trace("u clicked play button");
    onscreen_play_btn.visible = false;
    //myflv.alpha = 100; // uncomment later
    if (onscreen_replay_btn.visible==true) {
    onscreen_replay_btn.visible=false;
    //========================= Actions for Play and Pause Button
    =========================//
    //========================= Actions for FLVPlayback
    =========================//
    myflv.addEventListener(MouseEvent.CLICK,
    clickHandlerPauseFlv);
    function clickHandlerPauseFlv(event:MouseEvent):void {
    //trace("clickHandler detected an event of type: " +
    event.type);
    //trace("the event occurred on: " + event.target.name);
    trace("u clicked video component button");
    trace(myflv.totalTime);
    if (myflv.playing==true) {
    myflv.pause();
    onscreen_play_btn.visible = true;
    //myflv.alpha = .5; // uncomment later
    } else {
    myflv.play();
    onscreen_play_btn.visible = false;
    onscreen_replay_btn.visible = false;
    //myflv.alpha = 100; // uncomment later
    //========================= Actions for FLVPlayback
    =========================//
    //========================= Actions for Fullscreen Button
    =========================//
    fullscreen_btn.addEventListener(MouseEvent.CLICK,onFullScreenButtonClick);
    function onFullScreenButtonClick(event:MouseEvent):void {
    stage.displayState = StageDisplayState.FULL_SCREEN;
    //or set it to normal like: stage.displayState =
    StageDisplayState.NORMAL;
    //========================= Actions for Fullscreen Button
    =========================//
    //========================= Actions for onScreenPlay Button
    =========================//
    onscreen_play_btn.addEventListener(MouseEvent.CLICK,onScreenPlayButtonClick);
    function onScreenPlayButtonClick(event:MouseEvent):void {
    trace("working");
    if (myflv.playing==true) {
    myflv.pause();
    } else {
    myflv.play();
    //myflv.alpha = 100; // uncomment later
    onscreen_play_btn.visible = false;
    //========================= Actions for onScreenPlay Button
    =========================//
    //========================= Actions for onScreenReplay Button
    =========================//
    onscreen_replay_btn.addEventListener(MouseEvent.CLICK,onScreenReplayButtonClick);
    function onScreenReplayButtonClick(event:MouseEvent):void {
    trace("working");
    myflv.play();
    //myflv.seek(0);
    onscreen_replay_btn.visible = false;
    if (onscreen_play_btn.visible==true) {
    onscreen_play_btn.visible=false;
    //========================= Actions for onScreenReplay Button
    =========================//
    //========================= Actions for Stop Button
    =========================//
    stop_btn.addEventListener(MouseEvent.CLICK, StopButtonClick);
    function StopButtonClick(event:MouseEvent):void {
    myflv.seek(0);
    //myflv.autoRewind = true;
    //myflv.stop();
    onscreen_replay_btn.visible = true;
    //========================= Actions for Stop Button
    =========================//
    //========================= Actions for Button Controls
    =========================//
    //========================= Actions for Displaying Elapsed
    and Total Time =========================//
    myflv.addEventListener(MetadataEvent.METADATA_RECEIVED,
    cp_listener);
    function cp_listener(eventObject:MetadataEvent):void {
    //trace("Elapsed time in seconds: " + myflv.playheadTime);
    //trace("Total time is: " + eventObject.info.duration);
    var rounded:int = Math.round(eventObject.info.duration);
    var minutes:int = Math.floor(rounded/60);
    var seconds:int = rounded%60;
    flvTotalTime_txt.text = eventObject.info.duration;
    flvTotalTime_txt.text = (minutes<10 ? "0" :
    "")+minutes+":"+(seconds<10 ? "0" : "")+seconds;
    //flvElapsedTime_txt.text = String(myflv.playheadTime);
    stage.addEventListener(Event.ENTER_FRAME, updateTime);
    function updateTime(ev:Event):void {
    var rounded:int = Math.round(myflv.playheadTime);
    var minutes:int = Math.floor(rounded/60);
    var seconds:int = rounded%60;
    flvElapsedTime_txt.text = String(myflv.playheadTime);
    flvElapsedTime_txt.text = (minutes<10 ? "0" :
    "")+minutes+":"+(seconds<10 ? "0" : "")+seconds;
    //========================= Actions for Displaying Elapsed
    and Total Time =========================//
    myflv.addEventListener(Event.COMPLETE, com_listener);
    function com_listener(eventObject:Event):void {
    trace("movie complete");
    myflv.stop();
    onscreen_replay_btn.visible = true;
    back_btn.addEventListener(MouseEvent.CLICK, BackButtonClick);
    function BackButtonClick(event:MouseEvent):void {
    myflv.play();
    //myflv.autoRewind = true;
    //myflv.stop();
    onscreen_replay_btn.visible = false;
    /************************************ THE CODE FOR FORWARD
    AND REWIND CONTROL STARTS HERE *****************************/
    var id1:Number;
    forward_btn.addEventListener(MouseEvent.MOUSE_DOWN,
    ForwardButtonDown);
    function ForwardButtonDown(event:MouseEvent):void {
    //forward_btn.onPress = function() {
    //mklik_flv.pause();
    var dest1:Number = myflv.playheadTime;
    id1 = setInterval(function ():void {
    myflv.seek(dest1 += 2);
    }, 100);
    forward_btn.addEventListener(MouseEvent.MOUSE_UP,
    ForwardButtonUp);
    function ForwardButtonUp(event:MouseEvent):void {
    //forward_btn.onRelease = function() {
    //myflv.play();
    clearInterval(id1);
    // ************************ Forward Button Function
    // ************************ Rewind Button Function
    var id2:Number;
    back_btn.addEventListener(MouseEvent.MOUSE_DOWN,
    BackButtonDown);
    function BackButtonDown(event:MouseEvent):void {
    //back_btn.onPress = function() {
    //mklik_flv.pause();
    var dest2:Number = myflv.playheadTime;
    id2 = setInterval(function ():void {
    myflv.seek(dest2 -= 2);
    }, 100);
    back_btn.addEventListener(MouseEvent.MOUSE_UP, BackButtonUp);
    function BackButtonUp(event:MouseEvent) {
    //back_btn.onRelease = function() {
    //mklik_flv.play();
    clearInterval(id2);
    }

    how long is your flv (in seconds), if allowed to play without
    ff/rewind/pause?

  • How can I fix error code 131:4? Licensing for this product stopped working. I have windows vista home edition and CS4 Design Premium. I downloaded licensing zip file for windows but I can't seem to get it to launch. Look forward to help from anyone

    How can I fix error code 131:4? Licensing for this product stopped working. I have windows vista home edition and CS4 Design Premium. I downloaded licensing zip file for windows but I can't seem to get it to launch. Look forward to help from anyone

    Steve,
    I appreciate your answer.  While it might work, I'm a bit hesitant to remove the other programs as a possible solution since they are all currently working.
    With Acrobat 9 Pro failing with the OS 10.7 upgrade, I'm hoping that there is a less severe solution.
    Since the trigger appears to be 10.7 and may have something to do with the discontinued support of Rosetta, I could be spending a few hours working on a reinstall without a change.  Yes, it might work.  The "might" is the part that makes me hesitate.
    Is anyone else out there on OS 10.7 and running Acrobat 9 Pro?  Any issues with anyone else?
    Thanks Steve.  I do appreciate your offering a solution.  I may end up trying it if nothing else comes together.
    Mark

  • I really need help from anyone willing to help a poor guy out

    I have installed and uninstalled adobe and all of its components. I dont get any sound or video out of anysites at all. I even reinstalled windows xp pro to try and fix the problem. I have done allot of things posted and have come up empty handed. I am seriously frustrated. I have everthing up to date and atill no luck. I get sound and video on my desktop players and anything else off line please help me.

    To better assist you with this issue we need to know:
    What is your operating system? (Windows or Mac) (XP, Vista, 7, 8)
    What browser do you use? (Internet Explorer, Firefox, Chrome, Opera, Safari)
    Are you seeing any error messages?
    Can you provide screenshots of the error messages (if applicable)?

  • I really need help from anyone about transfering from my ipod to my compute

    I don't know what I did, but There is nothing in my itunes any more. Also all my settings are gone (such as all my playlists and pod cast subscriptions. I still have everything that I had already down loaded into my ipod in my ipod. Is there any way I can download from my ipod back into my itunes? If not, is there any way to locate the missing stuff that should still be in my computer since I never emptied the recycle bin in the last couple of weeks? Thank you, Marty

    First you need to scan the system for viruses and malware if your sure you done nothing to wipe iTunes library out. Scan with your antivirus program and scan for malware with Ewido http://www.ewido.net/en/download/
    Now you can use a program like yamipod to copy just the playlist if you want http://www.yamipod.com/main/modules/home/

  • Need urgent help from experienced apple user

    Right i will explain this as best i can in writing. Basically i got a iphone 4g for christmas and i have done everything except link it to a apple id. When i try to link it everything is smooth but when i get to payment it rejects 3 cards which all work for everything else i have tried all of them many times and also i did the click and buy get to it click it press continue goes to click and buy website then i press continue and then it goes to a separate window saying wait a moment loading itunes it will then say need a application to run it i choose itunes and then guess what...it goes back to itunes and returns to step 1 to put in the details and i have put in the same details over 10 times today and am really sick and tired of doing it so if anyone can enlighten me of what i am doing wrong i will be very thankful and merry christmas everyone!

    With cards in iTunes i know they have to relate to the country you are currently using your connection from. Card details must be the same as the address infomation you put in, So Name should be same on the card, Address should be same etc. Apart from those not to sure.
    Hope this helps

  • Need help from anyone who can help, or my uncle, who ever sees this first...

    I have a small problem, ever since I updated my adobe flash, every single time I load my web browser. Be it IE or Firefox or hell even Netzero's crap wb, it crashes the page I tried to open up.
    I tried to find the flashplayer that was out prior to 10.2(whatever) but I can't seem to find it and am always redirected right to the newest one that has just come out.
    I am at my wits end with this thing please someone help me out.
    By the way, Uncle Jim Doubek, this is Tony's son ( your brother in Tennessee ) Andrew Doubek, asking for help...
    ~mom made me put that~

    Thanks, You don't trust IE, but you use Windows? Ok:-)
    Go to C:\Windows\SysWOW64\Macromed\Flash  Open the Flash folder and post back all files listed. The NPSWF files you will need to Right click on and Open, then click on Properties to obtain the Version numbers.
    Then using IE, go to Tools, Manage addons and find Shockwave Flash Object, make sure it's Installed, Enabled and the same version of Flash Player that you have Installed. Let me know.
    Using FF, go to all plugins and make sure Shockwave Flash plugin is Installed and Enabled. Let me know.
    Test both browsers here and you should see the Flash Player logo animation(RED F spin)
    http://www.adobe.com/software/flash/about/ Let me know.
    Also the version of Flash Player will be displayed.
    If you use adblock or adblock plus or any popup blocking software you may want to disable them since they block Flash Content.
    Any Virus issues? If so which program removed them?
    Go to this site and see if you have a Kill-bit set. Just look to see if that Key is there in Post#1. If it is, then in Post#4 at the bottom is the solution needed.
    http://forums.adobe.com/thread/782435?tstart=0
    Please be sure to follow the above and address my questions.
    Thanks,
    eidnolb

  • Offtopic, but i really need some urgent help

    Hey guys,
    I just noticed that ive got a really wasted virus :/
    Its renaming all my files and folders to what lookes like Japanese characters, but because i havnt got a interpreter, they appear as those little block thingies. After its done renaming the folder, it declares it as empty, and when you try to open it, it says something about : "#Folder Path# is not accesible. The file or directory is corrupt and unreachable." Ive been watching it slowly spread, trying to scan and disinfect it with my Anti-Virus (F-Secure), but it wants nothing of the sort, coz it sees the folder as empty and skips the search. Ive already lost WEEKS of dowloaded material (Mostly Anime and music, but irresplacable none the less)
    already, and im about to freak out. Any help would be very very very much appreciated. If you could direct me to a Anti-Virus that you think will solve the problem, that would be really cool. This is really important, im only guessing, but its prolly only a matter of time before it starts attacking my windows folder, then im gonne be in really deep trouble :(

    My Computer is gonne be dead and buried by the time
    this site loads, That is the problem with downloading stuff on a Windows box without having a virus checker or a firewall.
    and this isnt a cheap computer
    either :/ Which will be cheaper? A virus checker or re-installing your oprerating system and downloading all your files again.
    >
    What do you think about removing the infected/useless
    harddrive? Think that might slow the infection down?
    Im open to all sorts of suggestions, as long as the
    are fast acting :/I think you are stuffed!

  • Hi, I'm Navica, Im 13 and I need help from anyone on this forum

    my dad got me this realy cool G3 clamshell ibook for xmas. but nothing works/___sbsstatic___/migration-images/migration-img-not-avail.png especially my new ipod. i NEED to update to at least 10.2 but cant seem to find out how to get it on here. my dad has emac dvd of 10.3 but i only have a cd reader. he said if i could find it and dowload it online he would pay for it. sum1 pleaze help/___sbsstatic___/migration-images/migration-img-not-avail.png nothing works with 10.1/___sbsstatic___/migration-images/migration-img-not-avail.png this browser barely works.
    i told him its almost 2009 and you can find anything online. comon' apple don't let me down

    Navica,
    OS X is not available for download. You have to buy physical disks.
    both 10.2 and 10.3 are years out of print and you'll have to look for used copies. I suggest you try ebay
    http://computers.shop.ebay.com/items/Software_os-x-panther_W0QQ_catrefZ1QQ_dmptZUSQ5fNonfictionQ5fBookQQ_flnZ1QQ_sacatZ18793Q Q_trksidZp3286Q2ec0Q2em282?trksid=p3286.c0.m282
    make sure you buy a retail version. do not buy computer specific sets as they only work on specific hardware.

  • I Need Help From Anyone!!!ASAP!!!

    my ipod is showing an unhappy face it wont let me restore it and it isnt recognised on my pc and makes a high pitched dropping sound im going away on saterday so need help fast!!!thanks
    Dell latitiude D610   Windows XP Pro  

    See these troubleshooting articles.
    My iPod is sad.
    What does this picture on my iPod mean?
    PC doesn't recognize the iPod is connected.
    Folder and ! error.
    When restoring the iPod, it's useful to put into disk mode first.
    Putting iPod into disk mode.
    This icon is usually indicative of a hard drive problem, and if none of the above help, it will need service.
    You can arrange online service here.
    Service request.

  • I need an urgent help  remove namespace from proxyServie request body

    I have EFIBetalingOrdningMisligholdt proxyService that called IMMultiHaendelseModtag IMMultiHaendelseModtag business Service, but they have different xsd, so i am transforming EFIBetalingOrdningMisligholdt proxy service reuest xsd to
    IMMultiHaendelseModtag business service xsd.
    Bellow i have my xq file for the transformation.
    IMMultiHaendelseModtag Business Service request parameter should look like this.
    here is partial request to IMMultiHaendelseModtagBusinessService
    <soapenv:Body>
         <ns:IMMultiHændelseModtag_I      revision="string" xmlns:ns="http://skat.dk/begrebsmodel/2009/01/15/">
         <ns:Kontekst>
         <!--You may enter ANY elements at this point-->
         <AnyElement/>
         </ns:Kontekst>
    IMMultiHaendelseModtagBusinessService is called
    here is a partial of the transformed request
    Route to: "IMMultiHaendelseModtag"
         $outbound:
         <con:endpoint      name="BusinessService$dk.skat.efi.im$biz$IMMultiHaendelseModtag" xmlns:con="http://www.bea.com/wli/sb/context">
         <con:service>
         <con:operation>getIMMultiHændelseModtag</con:operation>
         </con:service>
         <con:transport>
         <con:mode>request-response</con:mode>
         <con:qualityOfService>best-effort</con:qualityOfService>
         <con:request      xsi:type="http:HttpRequestMetaData" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
         <tran:headers      xsi:type="http:HttpRequestHeaders" xmlns:tran="http://www.bea.com/wli/sb/transports">
         <http:Content-Type>text/xml</http:Content-Type>
         <http:SOAPAction>
         "http://skat.dk/begrebsmodel/2009/01/15/getIMMultiHændelseModtag"
         </http:SOAPAction>
         </tran:headers>
         </con:request>
         </con:transport>
         <con:security>
         <con:doOutboundWss>false</con:doOutboundWss>
         </con:security>
         </con:endpoint>
         $body (request):
         <soapenv:Body      xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
         <ns:EFIBetalingOrdningMisligholdt_I      revision="string" xmlns:ns="http://skat.dk/begrebsmodel/2009/01/15/">
         <ns:IMMultiHændelseModtag_I>
         <ns:HændelseSamling>
         <ns:EFIHændelseStruktur>
    but the problem this :
    <soapenv:Body      xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
         <ns:EFIBetalingOrdningMisligholdt_I      revision="string" xmlns:ns="http://skat.dk/begrebsmodel/2009/01/15/">
    question.
    How can I transforme :<ns:IMMultiHændelseModtag_I      revision="string" xmlns:ns="http://skat.dk/begrebsmodel/2009/01/15/"> to <soapenv:Body      xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
         <ns:EFIBetalingOrdningMisligholdt_I      revision="string" xmlns:ns="http://skat.dk/begrebsmodel/2009/01/15/"> ?
    declare namespace xf = "http://skat.dk/begrebsmodel/2009/01/15/";
    declare namespace ns0 = "http://skat.dk/begrebsmodel/2009/01/15/";
    declare function xf:test($eFIBetalingOrdningMisligholdt_I1 as element(ns0:EFIBetalingOrdningMisligholdt_I))
    as element(ns0:IMMultiHændelseModtag_I) {
    let $EFIBetalingOrdningMisligholdt_I := $eFIBetalingOrdningMisligholdt_I1
    return
    <ns0:IMMultiHændelseModtag_I>
    <ns0:HændelseSamling>
    <ns0:EFIHændelseStruktur>
    let $KundeStruktur := $EFIBetalingOrdningMisligholdt_I/ns0:BetalingsordningMisligholdListe/ns0:Kunde[1]/ns0:KundeStruktur
    return
    <ns0:KundeStruktur>
    <ns0:KundeNummer>{ data($KundeStruktur/ns0:KundeNummer) }</ns0:KundeNummer>
    <ns0:KundeType>{ data($KundeStruktur/ns0:KundeType) }</ns0:KundeType>
    for $VirksomhedCVRNummer in $KundeStruktur/ns0:VirksomhedCVRNummer
    return
    <ns0:VirksomhedCVRNummer>{ data($VirksomhedCVRNummer) }</ns0:VirksomhedCVRNummer>
    for $KundeNavn in $KundeStruktur/ns0:KundeNavn
    return
    <ns0:KundeNavn>{ data($KundeNavn) }</ns0:KundeNavn>
    for $DriftFormKode in $KundeStruktur/ns0:DriftFormKode
    return
    <ns0:DriftFormKode>{ data($DriftFormKode) }</ns0:DriftFormKode>
    for $EnkeltmandVirksomhedEjer in $KundeStruktur/ns0:EnkeltmandVirksomhedEjer
    return
    <ns0:EnkeltmandVirksomhedEjer>{ $EnkeltmandVirksomhedEjer/@* , $EnkeltmandVirksomhedEjer/node() }</ns0:EnkeltmandVirksomhedEjer>
    </ns0:KundeStruktur>
    <ns0:IndholdValg>
    <ns0:EFIBetalingOrdningMisligholdtStruktur>
    let $BetalingsOrdningliste := $EFIBetalingOrdningMisligholdt_I/ns0:BetalingsordningMisligholdListe/ns0:Kunde[1]/ns0:BetalingsOrdningliste
    return
    <ns0:BetalingsOrdningliste>
    for $MisligholdtBetalingsordning in $BetalingsOrdningliste/ns0:MisligholdtBetalingsordning
    return
    <ns0:MisligholdtBetalingsordning>
    <ns0:BetalingOrdningEFIIndsatsID>{ data($MisligholdtBetalingsordning/ns0:BetalingOrdningEFIIndsatsID) }</ns0:BetalingOrdningEFIIndsatsID>
    <ns0:BetalingOrdningID>{ data($MisligholdtBetalingsordning/ns0:BetalingOrdningID) }</ns0:BetalingOrdningID>
    <ns0:BetalingOrdningRateID>{ data($MisligholdtBetalingsordning/ns0:BetalingOrdningRateID) }</ns0:BetalingOrdningRateID>
    <ns0:BetalingOrdningRateSRBDato>{ data($MisligholdtBetalingsordning/ns0:BetalingOrdningRateSRBDato) }</ns0:BetalingOrdningRateSRBDato>
    <ns0:BetalingOrdningRateBeløbStruktur>{ $MisligholdtBetalingsordning/ns0:BetalingOrdningRateBeløbStruktur/@* , $MisligholdtBetalingsordning/ns0:BetalingOrdningRateBeløbStruktur/node() }</ns0:BetalingOrdningRateBeløbStruktur>
    </ns0:MisligholdtBetalingsordning>
    </ns0:BetalingsOrdningliste>
    </ns0:EFIBetalingOrdningMisligholdtStruktur>
    </ns0:IndholdValg>
    </ns0:EFIHændelseStruktur>
    </ns0:HændelseSamling>
    </ns0:IMMultiHændelseModtag_I>
    declare variable $eFIBetalingOrdningMisligholdt_I1 as element(ns0:EFIBetalingOrdningMisligholdt_I) external;
    xf:test($eFIBetalingOrdningMisligholdt_I1)
    I have called the business proxy alone it works.
    errors
    The invocation resulted in an error: .
         <soapenv:Envelope      xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
         <soapenv:Body>
         <soapenv:Fault>
         <faultcode>soapenv:Server</faultcode>
         <faultstring>BEA-380000: Internal Server Error</faultstring>
         <detail>
         <con:fault      xmlns:con="http://www.bea.com/wli/sb/context">
         <con:errorCode>BEA-380000</con:errorCode>
         <con:reason>Internal Server Error</con:reason>
         <con:location>
         <con:node>RouteNode1</con:node>
         <con:path>response-pipeline</con:path>
         </con:location>
         </con:fault>
         </detail>
         </soapenv:Fault>
         </soapenv:Body>
         </soapenv:Envelope>
         System Error Handler
    $fault:      
         <con:fault      xmlns:con="http://www.bea.com/wli/sb/context">
         <con:errorCode>BEA-380000</con:errorCode>
         <con:reason>Internal Server Error</con:reason>
         <con:location>
         <con:node>RouteNode1</con:node>
         <con:path>response-pipeline</con:path>
         </con:location>
         </con:fault>

    Thanks for answering.
    the situation is that I have to make a pass-trough proxyservice.
    That I have never done before.
    explanation:
    proxyservice A-calls business service B, B need password and user name, but proxyservice A does not have Process WS-Security Header to configured, so I have to create a pass-trough proxyService to call business Service B.
    What is the best way of doing that ?
    As I have read that to solve the problem one can set ./ctx:security/ctx:doOutboundWss to true, the only way I saw that was possible was by mean of xquery.
    I am trying to explaine the same situation here again:
    I have proxyService A that does not have :
    Process WS-Security Header in the configuration, that mean I can not set it in my proxy Configuration by way of normal proxy configuration.
    But A is calling a BS that need security, so I want to create a pass-trough proxyservice.
    in order to do that, I want to set ./ctx:security/ctx:doOutboundWss to true in the request
    how can I set ./ctx:security/ctx:doOutboundWss to true in xq ?
    Tks

Maybe you are looking for

  • MSI z77a GD80 PCI-e running at 8x and Bios update problem

    Hi guys, first of all, sorry for my bad English, this is also my first topic, i recently bought a new PC, the spec is: i7 3770k @4,3ghz Corsair H80 MSI z77a GD80 bios 1.2 GTX 680 lightning 8gb ddr3 1600mhz cas9 G.Skill 1TB HDD WD Caviar Black Asus xo

  • Same batch picked on two different delivery notes

    Hi all, We have a situation whereby on occasion the same batch of a material is picked by SAP on two different delivery notes. I'm trying to get to the bottom of why this is happening - from what I can tell this only seems to happen when the initial

  • Is it possible to resume from hibernate without initrd?

    I succesfully build kernel without initrd dependency. It works great. Except hibernation. It can hibernate (or suspend-to-ram) but resume is not executed. It boots normally. So is it possible to resume without initrd?

  • Problems with xml transformation via xslt - strange results

    hi everybody... i've little trouble finalling a little tool programmed by myself for my education. the application contains a kind of document-server which enables the client to up- and download xml-document in a special format to/from the server. in

  • Safari Painfully Slow on new iMac

    I just got this computer yesterday, so it's state of the art and yet, Safari is totally irritating. It's slower on this computer that on my G4!!!!!!!!! I'm using DSL w/ethernet. Any suggestions?