Need recommend to build MB + CPU + VGA ....a question from Vietnam

1st, sry my E is not good...
My job is working with 60% Pr 40% Ae (full HD)
I need recommend to help me choose 3 option
CPU + MB (in VN they same price)
1.   i7 950 + X58
2.   i7 2600 + p8z68
3.   2xE5520 + asus Z8NA (2nd)
VGA (in VN they same price)
1.   GTX 570
2.   Nivida Quadro 1800 (because quadro 2000,3800,4800.. all supported is very difficult to buy it in VN) Quadro1800 can be GPU hacked ? (2nd)
My PSU 750W
RAM DDR3 Gskill buss 1333 4x4gb
a question from Vietnam, need to help so much
Thanks alot
Waitting for Harm recommend

I concur with Harm's recommendation. The Quadro 1800 is obsolete: It is based on the equally-obsolete GeForce 9600 GT but with only a 192-bit memory bus instead of a 256-bit memory bus. As such, the only memory configuration that was available on the Quadro 1800 was 768MB. Unfortunately, Premiere Pro CS5 requires a minimum of 765MB of free, unused graphics memory just to even enable GPU accelerated mode at all even with the hack. But since Windows itself eats up some of that 768MB, you'd be left with less than 750MB of free, unused graphics RAM with that Quadro 1800. As a result, Premiere Pro CS5 will be stuck in software-only mode even with the hack if you have the Quadro 1800 as the primary card.

Similar Messages

  • HT3382 I have an early 2006 Mac Mini and need to connect it to a VGA display.  What connector should I use?

    I have an early 2006 intel core solo Mac Mini (locted in India) and need to connect it to a VGA display.  I have looked at the support articles but can't figure out what adapter to use.

    There was a DVI to VGA adapter included with the early 2006 mini.  The one that I have looks like this
    You should be able to buy one, although it's not currently listed in the US Apple online store.

  • Need recommendation for hardware and software

    Hi all,
    I am doing a project related to current control.
    The purpose is to keep the current at constant. So I measure the current and get the value; and send a analog signal to tell our machine to discharge or to charge in order to keep the current at constant. I need to write the program to give analog signal to machine based on the current input.
    Also, the machine can communicate with user. User can monitor the machine operation statuse and current level, etc.
    I want to use LabView to program, since it doesn't cost a lot of time. I saw there is LabView RT LabView FPGA, etc. I am confused whether all of these are just diffrent function for LabView or different software. Which one I should use?
    For hardware, I have no idea what is compactible with LabVeiw. What I should use?
    I am totally new to this. I'll appreciate a lot if anyone can give suggestions.
    Thanks

    I would recommend having a look at the C-Series Modules. You can then either use the USB Single Module Carrier, Wi-Fi Single Module Carrier, the CompactDAQ platform or the CompactRIO platform. Here is a page that gives a detailed explanation:
    C Series Hardware
    For your application, you will definitely need LabVIEW. If you decide to go with the cRIO platform, then you will need LabVIEW RT. If you have any questions after reading through, please ask.
    Adnan Zafar
    Certified LabVIEW Architect
    Coleman Technologies

  • Do I need to re-build my window 8.1 driver for Windows 10 (WDK10)?

    Hi, all
    I am testing my hardware driver in HLK for windows 10 certification.
    I test the version for windows 8.1, it manually works OK in windows 10 (Build:10041).
    My question is : Do I need to re-build it use VS2015 CTP + WDK10? Or just install the 8.1 version then run HLK tests?
    Is there any feature of HLK needs to re-build driver using wdk10?
    (We didn't change any function or feature on this driver.)
    Thanks for the patientce for answering my question.

    The driver should work fine, Microsoft does a lot of work to ensure driver compatibility across revisions.  The only time I have encountered a need to build with a differing version is when the HLK (or actually its predecessors) required a specific
    tool for a submission.  Even then the older signed driver is acceptable until you need to modify it.
    Don Burn Windows Driver Consulting Website: http://www.windrvr.com

  • What are Microsoft- or other's-best practice or recommendation of Disk usage, CPU usage, memory usage monitoring to prevent system trouble ?

    We use win2003,win2008,win2012 servers.
    I heard somewhere that Microsoft recommendation threshold of disk usage monitoring is ( free disk space >= 15- 20 %) , if I remember correctly, but how about CPU usage and memory usage monitoring ? 
    What are  Microsoft- or other's-best practice or recommendation of Disk usage, CPU usage, memory usage monitoring to prevent system trouble and improve availability ?

    Hi,
    You can refer the following Performance Tuning Guidelines,
    Performance Tuning Guidelines for Windows Server 2003
    http://download.microsoft.com/download/2/8/0/2800a518-7ac6-4aac-bd85-74d2c52e1ec6/tuning.doc
    Performance Tuning Guidelines for Windows Server 2008 R2
    http://blogs.technet.com/b/josebda/archive/2010/08/27/performance-tuning-guidelines-for-windows-server-2008-r2.aspx
    WINDOWS SERVER 2012 - PERFORMANCE TUNING GUIDELINES
    http://blogs.technet.com/b/itprocol/archive/2012/11/27/windows-server-2012-performance-tuning-guidelines.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Need ABAP Query Builder Like Ms-SQLQuery Builder for Critical ABAP-Query

    Dear ABAP Friends,
    I Need ABAP Query Builder which is as flexible as Ms-SQLQuery Builder for building Critical ABAP-Queries e.g. "I have 4 master tables , Each master table having self-join with some condition and these 4 Result-Sets have Innser-Join+Left Outer Join " Please Help.

    I have seen TCODE SQ01, But I found that this TCODE may be used to build simple ABAP Query with Selection-screen which can be used for generating simple report. But i think for critical query ??????????
    I have build my Query in MS-SQL and got the right output, Now how do I write this in ABAP Using Join statement. Please Help.....................
    My SQL Query as below(Remember this is a single Query and verified correct in SQL):
    SELECT     P1.PERNR, P1.ENAME, P1.BEGDA AS P1BEGDA, P1.ENDDA AS P1ENDDA, P1.AEDTM AS P1AEDTM, P1.UNAME AS P1UNAME, P1.PERSG, P1.PERSK,
                          P1.PLANS,
           P2.ENDDA AS P2ENDDA, P2.BEGDA AS P2BEGDA, P2.AEDTM AS P2AEDTM, P2.UNAME AS P2UNAME, P2.GESCH, P2.FAMST,
                       P21.ENDDA AS P21ENDDA, P21.BEGDA AS P21BEDDA, P21.AEDTM AS P21AEDTM, P21.UNAME AS P21UNAME, P21.FAMSA, P21.FAVOR, P21.FANAM,
                          P21.FGBDT, P21.FASEX,
                       P0.ENDDA AS P0ENDDA, P0.BEGDA AS P0BEDDA, P0.AEDTM AS P0AEDTM, P0.UNAME AS P0UNAME, P0.MASSN,
                          P0.MASSG
    FROM         (SELECT     TOP (100) PERCENT PA0001_2.PERNR, PA0001_2.ENDDA, PA0001_2.BEGDA, PA0001_2.AEDTM, PA0001_2.UNAME, PA0001_2.PERSG,
                                                  PA0001_2.PERSK, PA0001_2.PLANS, PA0001_2.ENAME
                           FROM          PA0001 AS PA0001_2 INNER JOIN
                                                      (SELECT     PERNR, MAX(ENDDA) AS ENDDA
                                                        FROM          PA0001 AS PA0001_1
                                                        GROUP BY PERNR) AS Pi1
    ON PA0001_2.PERNR = Pi1.PERNR
    AND PA0001_2.ENDDA = Pi1.ENDDA
                                               ORDER BY PA0001_2.PERNR) AS P1 LEFT OUTER JOIN
                              (SELECT     TOP (100) PERCENT PA0000.PERNR, PA0000.ENDDA, PA0000.BEGDA, PA0000.AEDTM, PA0000.UNAME, PA0000.MASSN,
                                                       PA0000.MASSG
                                FROM          PA0000 INNER JOIN
                                                           (SELECT     PERNR, MAX(AEDTM) AS Pi0AEDTM
                                                             FROM          PA0000 AS PA0000_1
                                                             GROUP BY PERNR) AS Pi0 ON PA0000.PERNR = Pi0.PERNR AND PA0000.AEDTM = Pi0.Pi0AEDTM
                                ORDER BY PA0000.PERNR) AS P0 ON P1.PERNR = P0.PERNR LEFT OUTER JOIN
                              (SELECT     TOP (100) PERCENT PA0021.PERNR, PA0021.ENDDA, PA0021.BEGDA, PA0021.AEDTM, PA0021.UNAME, PA0021.FAMSA, PA0021.FAVOR,
                                                       PA0021.FANAM, PA0021.FGBDT, PA0021.FASEX
                                FROM          PA0021 INNER JOIN
                                                           (SELECT     PERNR, MAX(AEDTM) AS Pi21AEDTM
                                                             FROM          PA0021 AS PA0021_1
                                                             GROUP BY PERNR) AS Pi21 ON PA0021.PERNR = Pi21.PERNR AND PA0021.AEDTM = Pi21.Pi21AEDTM
                                ORDER BY PA0021.PERNR) AS P21 ON P1.PERNR = P21.PERNR LEFT OUTER JOIN
                              (SELECT     TOP (100) PERCENT PA0002.PERNR, PA0002.ENDDA, PA0002.BEGDA, PA0002.AEDTM, PA0002.UNAME, PA0002.GESCH,
                                                       PA0002.FAMST
                                FROM          PA0002 INNER JOIN
                                                           (SELECT     PERNR, MAX(ENDDA) AS Pi2ENDDA
                                                             FROM          PA0002 AS PA0002_1
                                                             GROUP BY PERNR) AS Pi2 ON PA0002.PERNR = Pi2.PERNR AND PA0002.ENDDA = Pi2.Pi2ENDDA
                                ORDER BY PA0002.PERNR) AS P2 ON P1.PERNR = P2.PERNR
    xxxxx----
    Edited by: Goutam Roy on May 5, 2009 1:11 PM

  • Need xmlp template builder plugin

    hey,
    just starting out using XMLP. I work with reports in the Oracle APPS environment and want to start creating report templates in Word. understand that i need xmlp template builder plugin to start to build templates. Do I need to download the whole XMLP product or is there somewhere where i can just download plugin.

    Look for the Oracle XML Publisher Desktop patch. Patch 4561835 if for version 5.5; patch 5027437 is for 5.6.2. It containes just the template builder and viewer.
    The complete XMLP product download will also have the latest version.

  • I need recommendations for an emac 1.42 and ibook 1.33 compatible external superdrive ?

    I need recommendations for an emac 1.42 and ibook 1.33, OS 10.3 - 10.5 compatible external superdrive ?

    If you need the drive to be able to boot those Macs, you'll need FireWire connectivity. If you ned to use a system optical disk to upgrade or re-install the OS. or repair your hard drive, you must boot from the optical drive. If either computer's built-in optical drive has failed, or does not support reading DVDs, you'l need to boot from an external sooner or later.
    If all you need is a burner, then USB opticals are cheaper and should work fine.
    This firm tests all their stuff for Mac compatibility:
    http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Price%7c0&Ne=5000&N =6866&Ntt=external+optical

  • Need Recommendation

    Sorry if this is wrong forums area, but I need this cleared up!
    Hello, I would like to make an API/applet/graphics game in java. The game is where you control an empire and its resources, ect, ect. I decided to use java for a game like this, because of the so-call "easier" use of API and applet gfx than C/C++. I know a little bit of C lang, and a little bit of Java, but I need recommendation.
    Question 1:
    What is suggested to run a 2d game, with color graphics? And I want it to have the ability to play some sounds, and display jpegs when needed. I am confused if this is an applet that can do this? I want my game to be stand-alone, and not in a browser.
    For example, I want it to show some gfx, while its in an API interface with a file menu, ect. But below it would be the 2d (applet?).
    I know I have much to learn, but first before I get tutorial hunting, I need to KNOW what is possible to do this? Ty for help.
    Question 2:
    And I'd like some good tutorial links, and recommended books to help me for being a newb, and want to learn gfx, applet.

    Answer 1:
    Yes, an applet can play sounds, display images, etc.
    Answer 2:
    http://www.google.com/search?sourceid=navclient&ie=UTF-8&rls=HPIB,HPIB:2005-48,HPIB:en&q=java+tutorials

  • Buying a multifunction - need recommendations

    I'm looking for the best multifunction (printer, fax, copier, scanner) for a home office that works with OS X and a MacBook Pro.
    Any recommendations?

    I am interested to this question too.
    I am looking for a multifunction printer to connecet to OS X.
    I am thinking about Epson or HP machines, Apple shop told me that Epson are better supported by OS X, but I like more HP printers.
    With the Epson you have one only choice for inkjets: Stylus DX7000F
    That seems to be the only with Fax feature. I have already called Epson hotline to ask about Fax feautures and I have already discovered that it can send and receive fax with computer off but you cannot send fax directly from computer: it is not detected like a modem/fax so you have to print your documents and then manually send them :-/
    So I am now looking for HP products and I have still to know if they can send and receive fax from computer applications.
    You have to see which features you need, if you prefer a office printer for standard documents or if you prefer photos printing.
    I am looking for these models:
    C6180 (office printer, wireless, documents ADF)
    C7180 (photo printer, may be out of stock, slides scanner)
    L7680
    still looking for informations and suggestions.
    thanks

  • Pages tells me I need to upgrade to 5.0 to open documents from iCloud.  When I go to the mac app store it says pages 5.0 is installed, but Pages says it's running 4.3.  I just want to open documents on my mac that were created on my iPad.

    Pages tells me I need to upgrade to 5.0 to open documents from iCloud, but the mac app store says its already installed and won't let me upgrade.  when I check the version of pages I am running it says 4.3.  I just want to be able to open documents on my mac that were created on my iPad.  How can i get Pages 5.0?

    Welcome to Apple Support Communities
    You already have got Pages 5.0, but you still have got Pages 4.3, so Pages 4.3 is being opened instead of the newest version, being this the reason why you get a message telling you to update Pages to the most recent version.
    If you don't need the old version, open a Finder window, choose Applications in the sidebar and delete the old Pages icon or move it to an external drive. I don't recommend you to do this, as users are complaining about the lack of features of the new version.
    Instead, what you can do is to put the new Pages icon in the Dock by dragging it from the Finder window to the Dock, so you can open the new Pages version from the Dock and you can open all your documents with it after opening the application

  • Increase in CPU Utilization after migration from APEX 3.1.2 to APEX 3.2

    Has any noticed any increase in CPU Utilization after migrating from APEX 3.1.2 to APEX 3.2?
    Thanks,
    Mark

    Hi Mark,
    Take a look at some of the usage reports within APEX (sessions, page views etc) to get an overall feel for where the time is being consumed.
    You'll also find it useful if you can run a statspack report (or AWR, ASH etc) during a busy period to be able to drill down into where that CPU is being spent.
    There's no magic answers here unfortunately, you need to track it down to where the time is being spent before working back up to find out where best to tune it.
    John.
    Blog: http://jes.blogs.shellprompt.net
    Work: http://www.apex-evangelists.com
    Author of Pro Application Express: http://tinyurl.com/3gu7cd
    REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

  • Help NeEDED. How to link to soap web service from objective c

    Hello , HELP
    I'm trying to connect to a SOAP based web service using objective C as my programming language. Although the little bit of information on the Apple Dev centre documents is should be straight forward, im struggling like **.
    What im trying to do is connect via a small username and password text-box plus 'login' button from interface builder to
    https://api.betfair.com/global/v3/BFGlobalService.wsdl and parameter called login.
    then pass it my username and password from the interface text-boxes plus a few other standard set bits of information which are required.
    in turn the soap request will pass back a session token which i need to store.
    I've tried using WSMakestubs, which builds successfully the classes, but when calling them method nothing happens.

    Hello Etresoft
    Thanks again for coming back to me.. I would like to add that maybe on my first thread i wasn't as clear on what i was asking for, and also what avenues have have stepped down before asking for help.. Believe me i hate nothing more than not being able to resolve something myself. I'm currently reading 'another' programming in cocoa book by Arron Hillgrass, although he touches on the web service call to a Amazon web service example, he doesn't go into detail about how to actually do this.
    So again thank you for trying to help me.. its greatly appreciated.
    Ok back to the subject, and your response below.. I will try and be as informative as i can.
    I'm want to create a application using the interface builder which has a username and password textfield plus a button called <login>..
    On entering the username and password and pressing the login button, i was to send a request to the a .wdsl (SOAP) web service and login.! the webservice in return will send back a session token, which i need to store for further web service calls.
    In xcode i have been trying now for 1 week..!!! and the more i read up on how to make the Soap request call the more i fail to understand if this is simple or complex.
    * A bit more info if i may, on clicking the login button i need to send information to the below address as a soap type request.
    https://api.betfair.com/global/v3/BFGlobalService.wsdl
    i need to also tell the request the method name which is loginreq
    and also i need to pass these parameters in the request.
    username (from textfield)
    password (from textfield)
    productId = '82'
    vendorsoftwareId = '0'
    locationId = '0'
    ipAddress = '0'
    The stage I've got to is, I've used wsmakestubs and I've tried 'wdsl2objc' to create the classes required. I have then created a app controller class and a interface build app with the textfields and login button. I have then linked up the textfields and button to the nsobject appcontroller with a action ibaction loginreq etc. On build and go the app builds without error's but fails to do anything when i press the login button.. (more i think about this the more i think its either two things, one im not passing the parameters and two im not invoking the loginreq method from the class.)
    I feel like im wading in treacle and getting nowhere fast.!
    All i would like is for some help from someone to point me the correct direction..
    Im thinking that with all the Soap web services out there in the WWW, this must now be a easy thing to do in xcode. Im starting to think im stupid..
    Thanks again for you Help
    Regards
    Iain Smith
    [email protected]

  • Quarterly CPU question from a rookie

    Question qualifier: I am not a trained or experienced DBA, I have however been thrown under the Oracle bus to set up a Patch and Vulnerability Management program for the Oracle servers.
    Question: Are the quarterly CPUs cummulative? In other words, does each quarterly CPU include the patches from the previous quarterly CPU?
    If not, I would like to clarify theire installation order.
    The CPUs MUST BE installed in the released sequence to make sure that all vulnerabilities are covered.
    a. This is correct. The patches have to be installed in the released order.
    b. This is the official position, but in reality it is not that strict.
    c. It doesn't matter as long as all the patched are applied.
    d. What is a CPU?
    I thank everyone in advance for your help.
    Jonathan

    All these questions are answered in Note 360470.1 (FAQ)
    Basically, CPU patches are security patches likes the ones released by other vendors sent at predefined intervals to contain a list of fixes based on bugs or issues found. They are usually not cumulative (the answer depends on which Oracle product you are referring to).
    About the official position?.. Treat as strongly recommended.
    CPU = Critical Patch Update

  • NEED HELP... PLEASE Upgrading Library Question

    Ok i have 3 imacs 1 with aperture 3 already on it and been using it awahile... 1 with aperture 2  and the other one with aperture 2 but i just purchased aperture 3 online for it and downloaded it... now for the last 10 hours it has been upgrading library and is still at 1%  I have about 20,000 raw images in it that i REALLY need... I am freaking out because i am such an idoit i forgot to back up the library before it started the download and upgrading... My other computer upgrading from 2 to 3 was very smooth so i never expected this.... Can someone please help me I really need these photos. Thanks

    The only way to upgrade from 10.6.8 (which is high as Snow Leopard goes) is to obtain Lion or Mountain Lion from the Online Apple Store or Yosemite from the Mac App Store.
    The requirements for Lion are:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price (though it's reported to have been removed from sale in some countries so may well cease to be available generally) but there seems little point as the system requirements are the same for Yosemite (10.10.x) - which is free - unless you need to run specific software which will run on Mountain Lion only. Mavericks (10.9.x) is no longer available.
    The requirements for Mountain Lion and Yosemite are:
    OS X v10.6.8 or later
    2GB of memory
    8GB of available space
      and the supported models are:
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    Xserve (Early 2009)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Yosemite is available from the Mac App Store (in Applications). Mountain Lion can be obtained the Online Apple Store.
      You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

Maybe you are looking for

  • Closing Stock of a Material

    If I know the Material Code and Plant then how can I determine the closing stock of that material for a particular date? I know that from the table MARD I can get the value of today's closing stock. But how can I know any other days closing stock. Th

  • JCA adapter with Spring JCA CCI

    Using Tuxedo JCA adapter (12.1.1) on Java 1.6_20 and Spring 3.2.0..... Want to get the Tuxedo adapter going outside a container in Spring via the Spring JCA CCI (http://static.springsource.org/spring/docs/3.2.0.M2/reference/html/cci.html). Not much e

  • Adding two numbers

    Hi Frnds I am very much new to Oracle ADF and Jdeveloper. My requirement is , there are 3 input text field and a button. When I enter number values in text field 1 and 2 and press the button ,then the sum should be display in the 3rd text field. Like

  • Firmware update message whenever I try to go online with HotSpot!

     Every time I turn on my HotSpot - Verizon MIFI451OL - i get a message for Verizon EvDo Rev. AE firmware updates. I attempt to sign in using the only password I have, and it refuses, stating my password is incorrect. I have two passwords, one used in

  • Workflow manager create activity at runtime

    Hi, I am trying to create Workflow manager 1.0 activity at runtime. Basically I am trying to create Xaml for the workflow through code. When I try to create "BuildMatchAllFilter" activity, I need to set "Matches" parameter, but in this class is set t