Need recommendation(template, scripts) to set up a SharePoint 2010 demo site

i have just set up a SharePoint 2010 server complete with AD and SQL Server 2012 on a virtual machine. i would like to know if there's any available resources out there which i can use to setup a demo site complete with contents and some themes styling
for demo purposes.

Hi,
You can have a look at the Top SharePoint Site:
http://www.topsharepoint.com/
http://sps.cloudapp.net/
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

What needs to be done to rebuild a current Sharepoint 2010 Server farm to work as a Sharepoint 2013 Server farm?

Hello Community
    Currently I have a Sharepoint 2010 Server farm.
    One server contains the database and DNS server
because it is the the domain controller.
    The other server Contains the Sharepoint 2010 Server software
and is the the application server where applications such as Metadata,
UPs, etc, reside (including web applications with sites built with the UI).
    Now I am going to change to Sharepoint 2013 Server because currently
there is no newer version of Sharepoint available.
    I am ready to rebuild the current Sharepoint 2010 farm configuration into
a Sharepoint 2013 Server farm from scratch.
    The question is what do needs to be added and\or changed to make the current
Sharepoint 2010 Server farm configuration work as a Sharepoint 2013 Server farm?
    Thank you
    Shabeaut

There is no direct in-place uprade method for SharePoint 2010 to 2013. You need to create a new SharePoint 2013 farm from scratch and attach service and content databases to upgrade them. Check out Upgrade
to SharePoint 2013 for more information about the process.
If you have another server, you would install SharePoint 2013 on this. If you don't, you'll need to remove SharePoint 2010 from your existing server and then install SharePoint 2013. Check out Hardware
and software requirements for SharePoint 2013 before starting to make sure your server meets the minimum requirements for SharePoint 2013:
Web server or application server in a three-tier farm
Pilot, user acceptance test, or production deployment of SharePoint Server 2013 or SharePoint Foundation 2013.
12 GB memory
64-bit, 4 processor cores
80 GB for system drive
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

How can I change the margin settings in the pages inspector to make them more specific for label templates. I need margins that can be set to hundreths of a centimetre not just tenths.

How can I change the margin settings in the pages inspector to make them more specific for label templates. I need margins that can be set to hundreths of a centimetre not just tenths.

I doubt you need hundreths as you would not even be able to measure that and the printer doesn't hold the paper to those tolerances.
fruhulda is right. Pages accepts higher measure but rounds it in the measure field.
If you want absolute accuarcy you need to set your measures to points. Everything else is being recalculated.
Peter

OEM - Refresh Template script generation wizard don't work

(Oracle 9.2.0.8, single-master-many-mviews)
Hi,
I have never trusted in OEM but this time I hoped it will help me. Alas!
I created the deployment template using an OEM wizard. Now I need to generate the template script. The template script generation wizard supposed to do this but when I reach "Step 4 of 5 - Set refresh schedule" I set the interval and then... pressing "Next" button just does nothing. I can't pass to Step 5 despite all the information has been provided correctly. Anyone has any ideas about this or should I do it manually as usual and forget about OEM?
Oleh

Welcome to our community, Linda
In RoboHelp, if you open the Glossary pod (View > Pods > Glossary > Select Glossary) do you see terms and definitions listed there?
If not, that would explain it as the Glossary has no entries.
Assuming it does have entries, you may simply need to enable the tab by clicking View > Pods > Project Set-up. Expanding the Windows section in the pod and double-clicking your CHM window.
A CHM window looks like this:
If you don't see a CHM window, you will need to create one. If you do see a CHM window, double-click it. Then ensure the Glossary is enabled.
Keep us posted! Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Need Help with script: CS4 Flash Buttons

I created a 3 button bar using Flash CS4. It will link to three different HTML pages in a website. This is one of the three scripts I have on the first frame of the main timeline, the code is for one of the buttons, the other two are really the same with differing button numbers. This code does now open the page up in a NEW BROWSER window, but I would like the page to open in the existing window and not in a new one. The 3 buttons also have down states identified by a frame label of “hold”, I would like the script to set the hold frame or down state to be displayed when the proper page is loaded in the browser . Will someone please suggest to me what I need to add to this script to achieve this, your time and effort will be appreciated.
stop();
button1_btn.addEventListener(MouseEvent.CLICK, illus);
function illus(e:MouseEvent):void {
var targetURL:URLRequest=new URLRequest("illustrator.html");
navigateToURL(targetURL);

Thank you Todd... How about the code to display the Down stage when displayed,
got any thoughts on this.
Thanks'
Bill

In need of a script

Hi I'm in need of a script in illustator, i've searched but with no luck as its going to have quite a few steps.
Basically what I need is a script that will allow me to select a text box and do the following:
1. Outline the font
2. offset the paths by .05 with "joins:" set to "Round" and "miter limit" is "3"
3. unite the paths within the now outlined text
The font is N H Interlock (its a cursive font used to monogramming)
Not really sure where else to look. I'm very familiar with illustrator but not at all with scripting.
Thanks for your help! any and all is appreciated.

1. doable
2. this command is not scriptable (up to cs5)
3. this command is not scriptable (up to cs5)
it seems it can be done with Actions, have you tried them?

Need a VB-Script that read a txt-file and only the lines that are new since last time

Hi,
I need help to write a VB script that read all new lines since the last time.
For example: The script reads the textfile at specific time, then 10 minutes later the script read the file again, and it should now only read the lines that are new since last time. Anyone that has such a script in your scriptingbox?
cheers!
DocHo
Doc

Based on the excellent idea by Pegasus, where is a VBScript solution. I use a separate file to save the last line count read from the file, then each time the file is read I update the line count. Only lines after the last count are output by the program:
Option Explicit
Dim strFile, objFSO, objFile, strCountFile, objCountFile, strLine, lngCount, lngLine
Const ForReading = 1
Const ForWriting = 2
Const OpenAsASCII = 0
Const CreateIfNotExist = True
' Specify input file to be read.
strFile = "c:\Scripts\Example.log"
' Specify file with most recent line count.
strCountFile = "c:\Scripts\Count.txt"
' Open the input file for reading.
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objFile = objFSO.OpenTextFile(strFile, ForReading)
' Check if the line count file exists.
If (objFSO.FileExists(strCountFile) = False) Then
    ' Initial count is 0, so all lines are read.
    lngCount = 0
Else
    ' Open the line count file.
    Set objCountFile = objFSO.OpenTextFile(strCountFile, ForReading)
    ' Read the most recent line count.
    Do Until objCountFile.AtEndOfStream
        lngCount = CLng(objCountFile.ReadLine)
    Loop
End If
' Read the input file.
lngLine = 0
Do Until objFile.AtEndOfStream
    ' Count lines.
    lngLine = lngLine + 1
    strLine = objFile.ReadLine
    If (lngLine >= lngCount) Then
        ' Output the line.
        Wscript.Echo strLine
    End If
Loop
' Close all files.
objFile.Close
If (lngCount > 0) Then
    objCountFile.Close
End If
' Ignore last line of the file if it is blank.
If (strLine = "") Then
    lngLine = lngLine - 1
End If
' Save the new line count.
Set objCountFile = objFSO.OpenTextFile(strCountFile, _
    ForWriting, CreateIfNotExist, OpenAsASCII)
objCountFile.WriteLine CStr(lngLine + 1)
objCountFile.Close
Richard Mueller - MVP Directory Services

Script to set display name in iCS Calendar view to the LDAP CN

Script to set the display name in the Calendar view for iPlanet Calendar
Server(iCS) to the LDAP common name(CN)
By default, iCS uses a user ID(uid) based on an employee number, rather than on
an employee's first and last name, as the calendar ID(calid).
The current release of iCS (5.0 P2) does not create a display name for a
calendar when a user enables a calendar by logging in; by default, it will
list the calid again in the Display Name field of the Calendar view.
For example, if an employee has a calid of "12345," when you click the
Calendar tab to view the calendar, the Display Name will appear as follows:

12345 (12345)

A problem arises when a user tries to subscribe to another user's calendar.
Although the search criteria are based on the calid and the Display
Name, the only information currently stored in the calendar database is the
calid. Therefore, users will be unable to subscribe to another
user's calendar unless they know the calid of that person. The next
patch release for iCS will remedy this problem by using common names(CNs) as
the Display Names. That is, the database will store the CN values
from LDAP for users, and the Calendar view will appear something as follows:

12345 (John Doe)

Until this next release of iCS, there are two options to work around this
problem.

<OL>
<LI>You can "provision" users by running the cscal
administrative utility with the
Display Name option.

OR

<LI>If the user community already exists, you can use the sample Perl script
below to search through the calendars of users.

Note: If a default calid exists that doesn't have a Display Name, the script
will search the LDAP directory to find a CN to set as the Display Name for
that calendar.
</OL>

<HR>

Sample Perl Script:
#!/bin/perl5.004
sub TRUE {1}
sub FALSE {"}
$SIG{INT} = 'handler';
$SIG{QUIT} = 'handler';
$mypath = $ENV{'LD_LIBRARY_PATH'};
$savepath = $mypath;
$ENV{'LD_LIBRARY_PATH'} = $mypath.';.';
#--------------INITIALIZATION----------------
$host="ldaphost";
$base_dn="ou=People,o=iplanet.com";
$port=389;
$auth_dn="cn=Directory Manager";
$auth_pwd="password";
$found_confile = TRUE;
$default_cal = FALSE;
open(CSCAL,"./cscal -v list |");
while($cal_list = <CSCAL>)
if ($cal_list =~ m/: owner=/)
@calid = split(' ',$cal_list);
chop($calid[0]);
print "\ncalid: $calid[0] ... ";
$default_cal = TRUE if ($calid[0] !~ m/:/);
} elsif (($default_cal) && ($cal_list =~ m/^ name=([a-zA-Z ]*)/)) {
chomp($1);
print "cal name: $1";
if (($1 EQ ") || ($1 EQ $calid[0]))
open(LDAPSEA,"./ldapsearch -h $host -p $port -b \"$base_dn\" -D
\"$auth_dn\" -w \"$auth_pwd\" uid=$calid[0] |");
while($ldap_list = <LDAPSEA> )
if ($ldap_list =~ m/^cn: ([a-zA-Z ]*)/)
chomp($1);
`./cscal -n "$1" modify $calid[0]`;
print "The display name for $calid[0] is being modified to be: $1\n";
sleep(1);
close(LDAPSEA);
$default_cal = FALSE;
close(CSCAL);
sub handler
local($sig) = @_;
print "... Caught a SIG$sig--closing down shop\n";
close(CSCAL);
close(LDAPSEA);
exit(0);
}

anne wrote:
Hi David,
About your confuse about"case when 1=2 then "product_d"."name" else "calendar_d"."year" end".
You can try in your locale.
You will find they are different.
BASED ON THAT you have two table product_d and calendar_d AND they are related by one Fact table.
THEN When you type in
"case when 1=2 then "product_d"."name" else "calendar_d"."year" end"
AND
"calendar_d"."year",
IT WILL SHOW U TWO different RESULTS.
I need to show year which its related product is not null. but I cannot use SHOW->SQL RESULTS->TYPE SOME "WHERE..." because I also need to use "constrain"..
That why I choose to use a case when function..
So, do you have any idea about this?
Regards,
AnneWhy not use two filters in your request? Have something like this:
product_d.name IS NOT NULL
AND
calendar.year IS PROMPTED?
...instead of using a CASE statement? This way you can have both filters show the way they should in a meaningful way.

I need an automator script to play a folder of movies

I have a folder of quicktime movies. I have a Mac Mini with Lion. I have a TV. I need an automator script to grab the list of movie files from the folder and play them full-screen, one-by-one and then loop through the process to continue playing them, unattended, all day.
I cannot get the proper steps in automator to accomplish this (seems to me it should be easy) job.
Any ideas?
Doug Jansen
Tokyo

Dave,
Thanks for the tip. I didn't know that Quick Look would display a folder of files one-by-one. Once I set the first file to full screen, the rest also played full screen one after the other. Now I need a way to automatically launch Quick Look, set full screen and loop. This site http://automator.us/leopard/downloads/index.html has an automator action that uses Quick View, but on my Lion machine it just displays the first movie and only the first frame of the movie. It stops at that point.

Need Help with scripting for Automator/AppleScript.

Hi everybody,
I am building a small app for my mac, What I need is a script that can rename a file that I drop on it.
and example being:
example.jpg
(when I drop it on the app, I want the app to change the filename of the document to "Image.jpg"
I have tried this with Automator, but it requires that I specify the file to be changed, what I need is something that will change the name of any file I drag onto it.
I am using it for application specific files.
Kind regards,
Pete.
iBook G4; 60GB Hard Drive, 512MB RAM, Airport Extreme

Open the Script Editor in the
/Applications/AppleScript/ folder and enter the
following:
on open(the_file)
tell application "Finder"
set name of the_file to "Image"
end tell
end open
Save this script as an application.
(11347)
this script compiled correctly; however when run it returned the following error "Can't set name of (the_file) to "Image.jpg"
I am also given the option of editing the script or just quitting.
thanks for your help

Scripting & Applying Set Percentage in Javascript

I need to script a set percentage to an existing calculated total field in order to show a new field total with the set percentage applied. Total is already calculated in the form, but I'm not sure how to plug in the 2.25% to calculate for a final total.
Example:
Total ____
Final Total ____ (new field with 2.25 percentage applied)

Robert,
Great – thanks! I did figure that out (eventually), but now have the issue of the Permit Fee field showing $0.26 when it should just show $0.00 until the Number field is filled in and the amount is calculated. Can you help? The error screen says that it doesn’t like the last equal sign. I’m at a loss…
TopmostSubform.Page1.Cell[10].Permit_Fee::calculate - (FormCalc, client)
Permit_Fee.rawValue = (4000.00Cell[8].Number + 0.25)1.0225
If(Number.isNull | Permit_Fee = “”)
Thanks!
Noemi Harvell

Want a Script to set Computer extensionattribute in Bulk

Want a Script to set Computer extensionattribute in Bulk by giving input from CSV Computer Name and extensionattribute.
Regards,
Kashi
Kashi

Hi Kashi,
You can find pre-written scripts in the repository:
http://gallery.technet.microsoft.com/scriptcenter
If you can't find what you need, you can request a script here:
http://gallery.technet.microsoft.com/scriptcenter/site/requests
Let us know if you have any specific questions. This would be a pretty basic script, so you can use this requirement as a good excuse to learn how to get around in PowerShell. If you haven't had any exposure at all, you can check out the learning resources
here:
http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing)

Need a windows script to check all unix db boxes are pinging ?

Hi ,
I need a windows script to check all unix remote db boxes are pinging ?
I need to show the output in an html file.
Can anyone suggest ideas ?

I have a script that "kind of" works. The only problem I've seen is that it gets confused when filenames contain characters that are fine in Macland but not good in Unixland. Forward slashes are a good example of this.
In this case I have a folder in my home named "copytest" Inside copytest are two folders:
Source (containing the images to be added)
Dest (My existing library of images)
It also assumes that the folder of images to be added contains no sub-folders. Hope this helps.
tell application "Finder"
set theSource to folder "source" of folder "copytest" of home
set imagesToBeCopied to name of every file of theSource
end tell
repeat with theFile in imagesToBeCopied
try
if (do shell script "find -r ~/copytest/dest -name " & quoted form of (theFile as string)) is not equal to "" then
--The file exists. Don't copy it
else
--the file doesn't already exist. Copy it.
end if
on error
return "Failed while trying to check for existence of a file"
end try
end repeat

I need a shell script to move latest archivelogs from one server to another server..

Hi,
I need a shell script to move latest archivelogs from one server to another server..
Thanks&Regards,
Vel

ea816fb9-f9ea-45ac-906f-36a8315970d0 wrote:
Thanks it's really helpfull..
Now i have pasted a shell script which generates archivelog and shows latest archivelog time..
just check let me know the answer, that how i need to execute it..
# Force a logswitch to get the last archivelog to the standby host
ORACLE_SID=ORCL
ORAENV_ASK=NO
. oraenv >/dev/null 2>&1
SwitchLogfile()
# Do logswitch
RESULT=`echo "Alter system switch logfile;" | sqlplus -S / as sysdba | grep 'System altered'`
if [ "$RESULT" = "System altered." ]
then
export RETURN=1
else
export RETURN=0
fi
# Do we need to do something with this return value?
export RETURN
GetArchiveTime()
CURYEAR=`date +%Y`
echo "set heading off;" > temp.sql
echo "set termout off;" >> temp.sql
echo "select to_char(first_time,'YYYY-MM-DD HH24:MI:SS') from v\$archived_log where sequence#=(select sequence# - 1 from v\$log where status='CURRENT');" >> temp.sql
sqlplus -S / as sysdba <
spool tempres.txt
@temp.sql
quit
EOF
cat tempres.txt | grep ${CURYEAR} | grep -v grep | awk '{print $1" "$2}'
#rm -f temp.sql tempres.sql
SwitchLogfile
GetArchiveTime
You seem to have ignored Dude's VERY good advice and continue to press down this ill-advised path. If you continue this approach, you WILL have problems at the very time you do not need any additional problems. Trying to recover your production database at 2:00 in the morning is not the time to be getting errors from rman because it can't find what it needs - because you decided to move them around yourself.
Please reconsider.

Script to set reference point

I need a script to set transform reference point at desired position without clicking in these tiny squares in the selectors, both in control panel or transform palette.
I will bind these scripts to numpad keys with AutoHotKey and will be happy at last.
Help me, please, I have little experience in scripting and see entry for grabbing this task.

Look up Transformation in the references

Need recommendation(template, scripts) to set up a SharePoint 2010 demo site

Similar Messages

Maybe you are looking for