Need Recommendations on Best Configuration For My SW Needs Please!

Ok,
Besides all the "normal" stuff, I run Apple Aperture and Pixelmator (may one day move to PhotoShop). My finances limit me to either a 4 core @ 2.93Ghz or an 8 core @ 2.26Ghz. (Assume the RAM is the same at 6G.
Which unit will deliver me the best performance for these applications? If you need more info, please just let me know.
Thanks in advance!
Mark

Hi,
Don't forget about places like this:http://www.powermax.com/parts/code/PMCNMP
I saved $400 in taxes buying my Mac from them. And they are darn fine people to boot.
Also keep an eye out for what Apple sells as refurbished. Not that much of a price break, but it is some. Plus, Applecare is almost essential for these machines and that still covers their used models.
The 8 core will give you a little more speed and offers more options for growth, but I think the Hatters advice is very sound.

Similar Messages

Need Help With Best Configurations for Airport Express

I have to macs and an ipod touch that are usually connected to the same wifi. when I am watching a youtube video or downloading something the connection gets really slow on the other machines.
For example:
i am downloading a movie from the itunes store and i am trying to watch a youtube video on the other computer or checking my email on my iPod, the connection is really slow.
Is this because of the internet connection (3mbs)? or the express??
So i want to know if there are any settings aside from the factory settings to make it faster.
BTW: there are usually 4-5 other wifi's near me.
and the macs are less than 15 ft away from the airpost express..
thanks for any help!!!

The issue is the speed of your Internet connection.
You are doing very heavy downloads and therefore your limited 3mpbs capacity is not enough to meet the demand.
The Airport Express can provide much higher throughput that your internet connection so the problem is not there.

I will be buying the new IMac 27 inch in December. Would like input on the best configuration for photographic and possibly video processing-dream machine!

I will be buying an IMac 27 inch in December. What is the best configuration for photo and possibly video processing.Does one need a Mac Pro? Dream machine!

Just to explain what I just wrote to Laundry Bleach:
Why is there no iDVD on my new Mac?
https://discussions.apple.com/docs/DOC-3673
UPDATE & ADDENDUM:
But even though you can still buy iLife 11 that includes iDVD 7 from Amazon, Apple now make it difficult to install:
Poster jhb21939 posted this in another thread:
“when I attempted to load iDVD into a new iMac. A notice came up on the screen stating that the 'Authorisation Licence' had expired on 25 March this year (2012).
I contacted the Apple support team and eventually, I was told that the Licence had been withdrawn and could no longer be used.”
In other words Apple are now so adamant that we don’t use iDVD that they have tried to make it impossible to install.
In response, Old Toad posted this solution:
“You can still use it one all of your Macs. If you get an invalid certificate message just set your Mac's clock to sometime before early 2011 and run the installer. After you're done reset the time back to the correct time.” He added this comment:
“It began after iDVD and iWeb were discontued and they were dropped from the Apple Store. All I can think of is the certificate was set to expire after a certain time period after the intitial iLife disc was released.
I've been able to use the installer even without setting back the date. I just clicked on the Continue button and it would work as expected. For some it would not continue unless the date was set back.”
The latest anorexic iMacs just announced do not even include a CD drive! Proof positive that Apple virtually prohibit the use of DVDs - although the newly announced Mac Minis do include a Superdrive.
Yet, they still include iMovie! Heaven alone knows or understands what you are supposed to do with your newly edited masterpiece - except make a low quality version for YouTube?

Best configuration for maximum WiFi speed?

Hello, I am trying to configure my network for the best WiFi speed. I have a Comcast/Xfiinity Modem/ Wireless Router (SMCD3GNV) with speed of 50 Mbps down and 10 Mbps up (acutally 87 down and 11.5 up last time tested) and 3 Airport Extremes, and a 16 port GB switch. I am really confused about what should be plugged in to what and how to set up the Airport extemes for best WiFi speed for laptops, iphones and iPads etc. . I have a large house and want the WiFi to be available everywhere. Shoud I plug the Modem/Router and the first Airport extreme into the switch and then set up the other 2 Airport extremes as extended networks, or should I plug all the Airports into the switch, or should I plug just the first Airport into the switch and then connected the other 2 Airports into the 1st? Like I said I am really confused. Any help you can offer would be appreciated.
Thanks in advance,
Vic

For the best configuration for maximum WiFi speed, connect all your Extremes to the switch.
The effective range of your wireless network will be a function of the distances the Extremes are from one another. Each will be limited by Ethernet specification to a maximum distance 100m from the switch or adjacent Extreme.
This picture may help:
From Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations

When trying to access one website, Firefox says " This domain is not configured for this service. Please add it to your account."

I am trying to access a fabric website I have used before and when I try to type in the domain name, a message appears saying "This domain is not configured for this service. Please add it to your account". How do I fix this?

That message sounds like an address might have changed on the server...
Are you trying to access the site directly using a bookmarks, or by typing into the address bar, or by following a link in a search engine? Sometimes links change making bookmarks and search engine entries obsolete, or Firefox's autofill feature suggests an address that no longer works, so if one approach doesn't work, you might try one of the others.

I have a form that has multiple fields but has 5 sections. I have used mail merge to insert information but I can't get Excel to recognize that I need different names and addresses for each section. Please help.

I have a form that has multiple fields but has 5 sections. I have used mail merge to insert information but I can't get Excel to recognize that I need different names and addresses for each section. Please help.

Thanks for your response. I do believe I have the information needed for each form on a separate line in Excel. There is a first name, middle name, last name, city, and zip column. And field is entered on a different line for all the information. I'm really stuck.

Very frustrated. downloaded reader but when I try to download pop up box says I have to accept end user license agreement but there is no place to accept it at. I need to download pdf asap for my business. Please help.

very frustrated. downloaded reader but when I try to download pop up box says I have to accept end user license agreement but there is no place to accept it at. I need to download pdf asap for my business. Please help.

Hi Pat. I've done that, it opens up the install window again. If I click on install it says it's already installed. Nothing comes up that allows me to accept the end user agreement. I just retried and the same thing happens.
I appreciate your help.
Shelley

Is there any link between oe_order_headers_all and hz_cust_accounts tables. I need to find the cust_account_id for some order_number. Please help me with this

Is there any link between oe_order_headers_all and hz_cust_accounts tables. I need to find the cust_account_id for some order_number. Please help me with this

you can link
OOH.invoice_to_org_id=CUST.cust_account_id   -- invoice customer
OOH.sold_to_org_id=CUST.cust_account_id   -- sold to customer
OOH.ship_to_org_id=CUST.cust_account_id   -- ship to customer

Need Recommendations on Best Used Mac for Logic Pro

Hi --
I am running Logic 8 on a mirrored door G4 (dual 1.25 GHz PowerPC), and am starting to run into some limitations on number of tracks and plug-ins. There is a used Mac outlet near me, and I am considering doing a trade-in, but wanted to know folks opinions on what might be the best bang for my buck on a newer used Mac.
I typically run about 10-15 audio tracks, and a typical/reasonable number of plug-ins (eq, compression, reverb). I was also thinking about using a tower versus a notebook, as I am set up that way now, with my G4 isolated in a closet and cabled out to my mixing station. Fan noise from the computer is a factor, though. (Though I have put up with the noisy G4 for quite awhile!)
Current used market includes"
- Power Mac G5/2.0 GHz dual processor (around $1500)
- Mac Pro 2.66 GHz Quad Core (around $2200)
- Mac Pro 2.66 GHz Dual Core (refurb for $2000)
Assuming same RAM, any experience-based opinions on what might be a good price-performance choice? Thanks in advance.

blayzay wrote:
To my knowledge G4 1.25 is far superior than a G5 2.0 any day except for the noise of the fan, which is way better on that G5.
Fr.BlayZay.
As an owner of both a MDD 1.25x2 and a G5 2x2.0 I have to disagree with blayzay and say that the G5 will give you far far more DSP power than your current G4. The G4 is a good machine but the G5 is in a different league.
You might also want to be aware that the G5 2x2.0 PCI will work happily with your Powercore PCI...you will need to purchase a new Powercore card if you plan to use this with one of the Intel machines.
One other thing you should consider is that you will also have to update all of your apps & plugins if you go for one of the Intel machines. This can be a real pain if you rely on plugs such as Spectrasonics or some of the more esoteric music apps...
Chris

Best configuration for a LinkSys Router

I've had the best wifi signal using a new LinkSys E3000 router, but it's varied depending on the band/channel. Can anyone else with a LinkSys router recommend settings that work best with an iPad?
Here's mine:
LinkSys E3000
5GHz
N-only
20MHz channels
Static IP, using DHCP reservation
36-48 channels
SSID broadcast enabled

Let me know the distance between wrt54gs router and the access point...
If the distance is 60 to 70 feet you may try this...Though AP Client will only work with another WAP54G you may still try this...This set up will not work if you try to communicate the WRT54GX2 router with WAP54G, so you need to configure the WRT54GS router with WAP54G...
1) Connect the WRT54GS router to the modem and configure the WRT54GS router for internet access...Once you are done configure your Access Point in Access Point Client Mode...For this you need to log in to your wrt54gs router and go to status tab, click on Wireless subtab under Status...Note down the MAC Address...
2) Now access the set-up page of your Access Point, click on AP Mode and select AP Client and in the Remote Access Point's LAN MAC Address field type the Wireless MAC Address you took note in Step1 and click Save Settings...
3) Match the Wireless Settings and IP Address settings on both the devices(WRT54GS and WAP54G)...
4) Connect the WAP54G on the LAN/ETHERNET Port of the WRT54GX2 router and disable it's DHCP...Change the Wireless Settings on the WRT54GX2 router and connect your wireless clients to the router...See if this works...

Best configuration for Time Capsule & Airport Extreme running one wireless network?

We just moved to a house that does not have Ethernet pre-wired so I've had to re-setup the wireless network in a different configuration and it seems we're experiencing deteriorated wireless signal for devices like laptops. It will work perfectly fine (and fast! wheee!!!) but then it will slow to a crawl and mostly timeout. before I reset everything and start from scratch, I'd like some help. As an FYI, when connected via Ethernet to either of these, Internet is blazingly fast… so my problem here is the Wireless portion.
As some background, here is how we had the network set up in the previous house which was working great (although it was wired for Ethernet which made things A LOT easier):
Airport Extreme (4th Generation)
Wireless Mode: Create a Wireless Network
Internet Facing (Connected to the Cable Modem)
Location: Upstairs Utility Closet (with Smartbox and cable modem)
Time Capsule (1st Generation)
Wireless Mode: Extend a Wireless Network
Joined to existing network above, but also connected to the Ethernet jack
Location: Upstairs Office
Here is the current set up we have running:
Time Capsule (1st Generation)
Wireless Mode: Create a Wireless Network
Internet Facing (Connected to the Cable Modem)
Radio Mode: 802.11n (b/g compatible)
Location: Upstairs Office
Airport Extreme (4th Generation)
Wireless Mode: Extend a Wireless Network
Joined to existing network above with NO incoming Ethernet connection
Location: Downstairs Family Room
My understanding is that the Airport Extreme should pick up and relay the signal downstairs, as well as provide the router for the devices downstairs that need Ethernet (TiVo, Apple TV, etc).
So, my question is (and thank you in advance for helping me sort this out!), what would be the best configuration to optimize the Wireless performance in the house?
Also, for whichever device is the one picking up the existing network and providing the router capabilities for the Tivo and such, is it possible for it to pick up but not rebroadcast the signal? I think in this new house we may have a good enough signal from the office, without the need to rebroadcast it. My theory is that in this house, they are too close together and interfere with each other and/or devices aren't sure which to choose so they bounce back and forth endlessly. Again, just a theory.
Many thanks again for your help! If I've left out any information, please ask and I can provide.

Should they be running on the same channel (as with the "Extend" option previously? Or just both on Automatic channels?
I would recommend the Automatic setting on both devices because this will allow each router to scan and choose an open channel automatically. If you want to set the channels manually, keep them separated by at least 4-5 channels. You would not want to ever use the same channel for both devices in this type of "roaming" setup.
Is there a way to limit bandwidth per device (or action) so that it doesn't monopolize the network and keep other devices from using it?
Nothing that I am aware of. It sounds like you have some young users who are likely visiting Bit Torrent sites, which will really gobble up the bandwidth with big, heavy downloads. The Time Machine has to back up the same files again when it makes the next pass, so that clogs things up again.
Backups would go 3-5 times faster, on average, if the computer(s) could connect using Ethernet, but I understand that wires are not cool with the younger crowd.
should BOTH the TC and AE be set up in Bridge mode?
The AirPort Extreme should be set up in Bridge Mode.
The Time Capsule...it depends. If the TC is connected to a simple cable modem...then the correct setting for Connection Sharing would be "Share a public IP address" on the TC. That is because a simple modem has only 1 IP address to deliver. The TC takes that address and "shares" it with other devices by setting up a local network for all your other devices.
If the TC is connected to a gateway....a combination modem/router in the same box that usually has 3-4 Ethernet ports on the device....then that device would be considered the main router on the network and the TC would be configured in Bridge Mode in that case to function correctly on the network.

What is the Best Configuration for using SSD & HDD Internal Drives in iMac?

Hi,
I have a Refurbished 2011 21.5" iMac. It came with a 1TB HDD. I had a 120GB SSD custom installed by Other World Computing. I would like to reap the speed benefits of having the OS and applications reside on the SSD and having most of my heavy, frequently used data on the HDD. I've considered simply going the route of changing the advanced settings of my user configuration so that my home directory is located on the HDD. I've read this is an ok solution, but that there may be better ways to do this to get the best out of the available speed of the SSD. Could anyone recommend better options?
For reference, I use apps like Photoshop Lightroom, the NIK suite of photo editing applications and Photoshop CS6 pretty heavily. I don't do much movie editing or production...only occasional slideshows in iMovie...although I do keep a lot of old, imported, video footage of my kids on my HDD and on my backup system.
Thanks,
Ben Shugart

Start with the only Apple doc I could find: http://support.apple.com/kb/ht5446. They tout the technology, but don't provide much in terms of help.

Need advice about best characterset for XMLDB

Hi,
Oracle 9.2.0.5 Windows 2000
Please, give me an advice about best character set
configuration for XML DB.
During installation Oracle istallator suggests
charset =AL32UTF8 for multilingual data and ncharset=
AL16UTF16.
Is it good settings for database, which will be
used for usual multilingual data and XML DB ?
Thanks,
Viacheslav

Yes, we strongly recommend the use of AL32UTF8 for XML DB.

Best Configuration for Laptop

I just purchased, and upgraded, a laptop that has:
GTX 470 (3 GB dedicated video)
24 GB DDR3 RAM
120 GB primary internal SSD (C Drive) (up to 550MB/s read, up to 500MB/s Write)
480 GB second internal SSD (D Drive) (up to 540MB/s read, up to 460MB/s write)
i7 processor
I shoot with 3 Sony HDR CX550V's. They of course compress to H.264...
So, what is the best way to setup this laptop? Basically, I installed the OS and software on the primary drive. Then I opened up premiere and created a blank project and setup "Media" and "media cache" under project settings to store in a folder on the D drive. I assume I don't want anything on the primary drive, no cache, no renders, just keep it clean.
But the C drive is faster and I would like your professional, experience opinion as to how to best configure this. Should I render out to the C since it has faster write? Should I store cache on C in a folder that I clean out every now and then? Data files on D? etc...
This laptop has a thunderbolt port too, and 4 USB3.0, it's an Asus laptop. I have an external drive, but it's RDD, 7200 RPM's. I could get an external SSD but for the most part I don't want to use an external drive in my workflow. However, for bigger projects if there's a major advantage I may need or at least want to do that. So, suggestions for this scenario would be appreciated too, but mostly curious about the best way to deal with my internal drives. I am curious if there would be a big difference expected with an external drive(s) in the mix...

Also, please be specific, like where to put what:
Project (premiere project files)
Scratch (video/audio previews)
Source files, my H.264 files that is)
Exports (Renders)
"Media Cache Files" and "Media Cache Database" under preferences/media
And anything else specific that would be helpful to know.
Thanks!

Best configuration for video editing ?

my boss wants to buy a best computer for our future projects. we are a small studio so we don't have really big budget. so I am thinking 2.66 cpu, 4gb memory, x1900 graphic card...
we are going to do, some 3D and video editing, and all other graphics stuff.
any suggestions?
do I need 8core or 4 core 3.0 cpu?

I don't know if you have seen it
but in [this thread:http://discussions.apple.com/message.jspa?messageID=5800151#5800151 we (so far two forum members and I) discussed about machine configuration options and other technical aspects!
I wish to insist on a point, do test (if you can) and read a lot before you buy!
Best,
G.

Need Recommendations on Best Configuration For My SW Needs Please!

Similar Messages

Maybe you are looking for