Need Recovery Disks - Please Help!

Hello,
I need the recovery disks for my "Lenovo 3000 N200" laptop as I can not create the disks myself. Problem is, when I tried to call Lenovo for the disks and pressed 2 for the 3000 support, "it didn't recognize my choice". I really need these disks as my whole laptop system is screwed up from installing Ubuntu as a partition. I have had a lot of help and it has led me to get these disks but even that is proving difficult.
Does anybody know of any other way to get these disks?
Thanks in advance,
Jack

Here are the part numbers
Windows Vista Home Premium 32-bit Recovery DVD part numbers
English, U.S., U.K. with enabled modem and WLAN
44X9992 replaces 43T7666
44X9733
Raptor22

Similar Messages

  • Iq506 problem wont boot, i need a recovery disks please

    I have a prob with my touchsmart iq506 it wont boot and i think i need recovery disks, i tried ordering but it appears no longer available, can anyone help? pls

    Hi
    As you mentioned disc was not available i was able to find a link for you.
    http://www.ebay.com/itm/HP-TouchSmart-IQ506-Driver​-Recovery-Disc-CD-DVD-/230849382523
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Product number: B1N25EA#ABV I need recovery disk

    please I need recovery disk because I lost my recovery disk

    This is NOT official HP Customer Support and I, as most other persons on this forum, do not work for HP. This is a peer-to-peer user supported forum for HP consumer class products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Any reply from a HP employee represents their own opinion and not that of HP's.
    Here are the specs for your HP Pavilion dv6-7080se Entertainment Notebook Computer. Here is the HP Pavilion dv6-7080se Entertainment Notebook PC Drivers page for your computer. Please contact official HP support in your region / country via the HP Worldwide Support Portal to see if HP Recovery Discs are available for your computer.
    If you have any further questions, please don't hesitate to ask.
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • I cannot transfer my file from macbook to external hard disk, please help me

    i cannot transfer my file from macbook to external hard disk, please help me

    wrong forum, but also need more information. Probably need to reformat (erase) the drive, tell people what disk drive it is, type of interface you are using, the model MBP you own.

  • Need recovery disk

    I need recovery disks for a HP ENVY dv7-7240us laptop... Any help is greatly needed.
    Thank-you

    Hi:
    To order a set of recovery disks for your notebook, click on the link below and then click to expand the line labeled Order Recovery Media.
    Then click the blue More Details button.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=5318...

  • Lightroom 4.4 keeps crashing saying "Lightroom encountered an error when reading from its preview cache and needs to quit" please help. I've tried reinstalling it and everything  Windows 8.1

    Lightroom 4.4 keeps crashing saying "Lightroom encountered an error when reading from its preview cache and needs to quit" please help. I've tried reinstalling it and everything  Windows 8.1

    I assume you know where your catalogue file (the lrcat file) is located. In the same folder is a previews lrdata folder which you should delete or rename in Explorer, then start LR again.
    If I've made incorrect assumptions above, sorry, and we'll go back over it from the start.
    John

  • It only uses 32bit, and my computer needs 64bit.   Please help.

    I am a non profit.  I ordered Photo shop Elements12 for PC  for my office.  It is a download only.  It doesn't dowload on my computer.  It only uses 32bit, and my computer needs 64bit.   Please help. The Adobe photoshop elements 12 is useless to me.  I can't seem to get anyone at Techsoup to help and trying to get Adobe to help is runaround.  What should I do to get it to run on my computer.  Please someone in the forum let me know how switch out the download for the correct one.

    64-bit windows can run 32-bit applications just fine and always has.  They are just limited to a small amount of memory.   If something isn’t working it’s likely another problem like an incomplete download or trying to install the Mac version on a PC or something like that.
    You can try downloading and installing from the PSE12 link, here, to see if it works any better:
    http://www.adobe.com/downloads/other-downloads.html
    If you can’t get things to work, then please post a screenshot of the error and a description of what you’re trying to do that lead to the error.
    Also the term “downloading” refers to transferring a file from a remote server, across the internet, to your local computer.   The term “install” means running the program that was downloaded on your local computer to put the working program on your computer that you can run.
    It would be helpful to know if your saying that the actual transfer across the internet part isn’t working, or if that part seemed to work, but when you run that installer program you’re seeing an error.

  • HT201295 My isight built in camera is only turning on for few second on my MacBook Pro (13-inch, Late 2011 ) when I use any camera needed app. Please help me.

    My isight built in camera is only turning on for few second on my MacBook Pro (13-inch, Late 2011 with osx Yosemite) when I use any camera needed app. Please help me. Its getting a little annoying.

    If restarting Mac or reinstalling OS X does not correct this symptom, you likely have a hardware problem.  Contact Apple Support or an Apple Authorized Service Provider for service.
    Message was edited by: EZ Jim
    Mac OSX 10.10.1

  • I try to restore my iphone in recovery mode but didn't get it and now can not come out of recovery mode please help me

    Hi I had perches one iphone4 from Hong Kong last month but after coming back i try to restore my iphone but it's give error 3194 then i try to restore it in recovery mode but still can not restore error -1 and now i cannot get out of recovery mode please help me to shovel this problem.

    Are you running modified software on your phone?  This error seems to be common if the firmware has been modified and you're trying to restore the phone again. 

  • HT4623 when i update my iphone 5 i receive error -1  my iphone 5 can not open it is on recovery mod please help me

    when i update my iphone 5 i receive error -1  my iphone 5 can not open it is on recovery mod please help me

    Error 1 or -1 indicates a serious hardware issue.
    Take the device to Apple or whomever provides hardware support in your country for evaluation and likely replacement.

  • I've had cydia put on my device didn't like it so deleted ap and now I cant get back into Icloud it's gone very faded in couler the icon in settings. Facebook Twitter and a few others have done the same. I need iCloud back please help!

    Hi please help me I'm useles with these thing. I've had cydia put on my device didn't like it so deleted ap and now I cant get back into Icloud it's gone very faded in couler the icon in settings. Facebook Twitter and a few others have done the same. I need iCloud back please help!

    I'm sorry we cannot help you.
    You have Jailbroken your device.  Apple does not support Jailbreaking and as such having done so has voided your warranty and forfeited any support from Apple and by extension these forums. We are not allowed to discuss Jailbroken devices in any way by the Terms of Service of the forum.
    You will have to find help elsewhere. Ask the person that installed Cydia to restore the phone.

  • Option key can't function to access start up manager, so i can't choose startup disk. please help me

    option key can't function to access start up manager, so i can't choose startup disk. please help me

    If you have Apple Care, call them and get a case number.  Otherwise, take the computer to an Apple store or an AASP.  Whichever is more convenient for you. 

  • HT3743 Alright! But i need help to unjailbreak my iPod Touch now. I need assistance. Please help me!

    I  need help to unjailbreak my iPod Touch now. I need assistance. Please help me!

    Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
    Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues
    Go to where you found out how to jailbreak

  • I have worked many hours on an iphoto book and I am up to page 29.  I cannot add any more pages and I need to!  Please help!!  "Add page" is not working!!!

    I have worked many hours on an iphoto book and I am up to page 29.  I cannot add any more pages past that and I need to!  Please help!!  "Add page" is not working!!!

    Fixed it thanks to similar questions and answers to them.  Thanks all!

  • HT201442 I've tried everything to fix my iPad after updating it today 10.9.2-now it is in recovery mode - please help ????

    I've tried everything to fix my iPad after updating it today 10.9.2-now it is in recovery mode - please help ????

    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

Maybe you are looking for

  • I need to get the cluster information using"MSCluster.Cluster" object

    Hi, Please anyone solve my problem ? I need to get the cluster information using"MSCluster.Cluster" object. Set objCluster = CreateObject("MSCluster.Cluster") objCluster .open <clustername> If i run the vbscript " Microsoft VBScript runtime error: Ac

  • ITunes deleted msvcr80.dll.  In order to reinstall msvcr80.dll,

    Need instructions on removing Apple's Internet Services folder.  Could not delete it even after deleting iCloud.  Error message reads: "The action can't be completed because the folder or a program in it is open in another program."  Background infor

  • Safari Crashes on 1.6.1

    Hello, I'm running Mac OS X 1.6.1 on a MacBook (Intel Core Duo) and since half an hour Safari crashes every time I try to start it. After I did the upgrade to 1.6.1 yesterday, everything was running fine. Thanks in advance, V. Process: Safari [1217]

  • Different unit Measures Total in over all Result

    Dear All, The quantity is in different unit of measures like Presently getting: 10PC 10KG 10PC 20KG 10ton Total * when add all those things the over result shows the * when i go with CKF  NODIM  option i could not found againest which order kgs are t

  • Setting DISPLAY enviroment variable

    Hi, I want to run oracle wallet manager from my windows client. My application server is installed on the SUSE Linux Enterprise Server 9. I have given the following command to set the DISPLAY variable. export DISPLAY=192.168.100.159:0. Here is the ou