Need Repair help!!!!!!!

What should/shouldn't i ship w/ my ipod for repair.

http://www.apple.com/pl/support/ipod/service/faq/

Similar Messages

  • I have repaired startup disk in disk utility but still get message saying startup disk needs repair, help.

    I am on a macbook pro running the latest version of yosemite. I was going to use Onyx to clean it, but I got a message stating that my startup disk needs repair. I command R went to disk utility to verify and repair and the disk was fine. However, I still get the same message when using Onyx. What should I do? Should I command R and reinstall? Will the fact that my startup disk needs repair cause a problem?

    Thank you @EricRoot, I think you may be correct. I don't get that message with other programs. However, I did locate files on my computer taking up way too much space...

  • MacBook smashed and need repair help

    Hi everyone. So today my early 2008 MacBook met the ground with full thrown-down force twice within a short period of time. Te result is a completely busted screen with shattered glass, a crumbling display, the wires literally hanging out of the sides and a metal portion of the screen hanging out from the back. The upper part of the case also suffered a crack running right up the middle and the screen itself now sits to the side and doesn't align with the magnets. The bottom half faired a little better (even though it landed on the bottom both times). After some attempt I got the computer to start and after a few minutes heard the little bing. I couldn't tell if it was actually functioning because the screen was completely black. During this I keep hearing a constant beeping coming from inside and a weird humming noise (different from the fan). I can also hear little fibers and ashes shifting as I tilt the laptop to the sides. My question is wether it would be worth fixing my laptop, what the price and steps to do so would be, and if I should just get a new laptop at this point.

    I would say it's not likely worth fixing... especially a 2008 machine.  There really is no way to know the extent of the internal damage.  With a destroyed screen and likely logic board replacement, you're looking at something that would cost more than the machine is worth at this point.  You'd basically be replacing every major component. 

  • False Disk Needs Repair??  Help Please!

    Every maintenance app I have (MacPilot, Onyx..) keeps telling me my disk needs repair BUT when I put in my install cd and go into disk utility and do a verify disk it says my volume is okay... I am confused.
    I can not run a verify disk with disk utility however, when logged on. It goes unresponsive and I have to force quit.
    Also if I try to run a verify permissions while under disk utility running on the install cd, I get an error that there is no catalog??
    Any help would be greatly appreciated before I make The Call for help.

    I booted up to my install disk and ran disk utility verify disk and it passed.
    My problems however have multiplied since my first post beyond getting that "volume needs minor repair"... my Pioneer optical drive won't read my install disk (spits it out) or any dvd formats, it only reads music cds at this point.
    In fact it stopped cold reading in the middle of running disk utility from my install disk. I had to power down and power up just to get the disk out.
    Methinks I have a problem requiring a trip to the Apple store.. ugh.
    I always backup daily, with Time Machine and another backup program, just in case this happens.

  • Hi I need ur help actually my iPhone 5 is not working properly I been to apple store they said u have to booked online for repair but I couldn't find where to register plz help out thx ali

    Hi I need ur help actually my iPhone 5 is not working properly I been to apple store they said u have to booked online for repair but I couldn't find where to register plz help out thx ali

    Dollersheikh wrote:
    ... I been to apple store ...
    Go to that Apple Retail Stores website and click on Make a Reservation...
    Here's an example...
    http://www.apple.com/retail/crossgates/
    Store List here  >  http://www.apple.com/retail/storelist/

  • I have Mac mini and there is partition of boot camp but some miss understanding the osx 10.8.2 is deleted and while I m going to recovery mode the portition can not removing and the also cant repaired what I do I need urgent help ???? Please ?????

    I have Mac mini and there is partition of boot camp but some miss understanding the osx 10.8.2 is deleted and while I m going to recovery mode the portition can not removing and the also cant repaired what I do I need urgent help ???? Please ?????

    Do you have a Time Machine backup or clone?  If not,
    all is lost if you have in fact deleted your OSX partition
    and you will have to do a reinstall from Recovery HD
    and install all else.

  • HT2711 ry space available  and I am told my start up disc need repairing-I don't know how to do this-also the trash wont empty - HELP

    I have a OS X 10.6.8 Mini Mac - I cannot empty my trash so went to Disk Repair and had a message that my start up disc need repairing - do not know how to do this - also I have a message saying my Start Up disc has no more Memory Spave available for application memory. HELP - I am not very computer literate so please use simple language, thanks

    One stage at a time!
    1. Can't empty trash:
    http://support.apple.com/kb/HT1526?viewlocale=en_US
    2. Repairing permissions is important, and should always be carried out both before and after any software installation or update.
    Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
    In First Aid, click on Repair Permissions.
    Background information here:
    http://support.apple.com/kb/HT1452?viewlocale=en_US
    and here:
    http://docs.info.apple.com/article.html?artnum=302672
    An article on troubleshooting Permissions can be found here:
    http://support.apple.com/kb/HT2963
    By the way, you can ignore any messages about SUID or ACL file permissions, as explained here:
    http://support.apple.com/kb/TS1448?
    If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
    Once that is complete reboot again from your usual start-up disk.
    More useful reading here:
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    http://support.apple.com/kb/TS1417?viewlocale=en_US
    For a full description of how to resolve Disk, Permission and Cache Corruption, you should read this FAQ from the X Lab:
    http://www.thexlab.com/faqs/repairprocess.html
    Apple's advice on general maintenance:
    http://support.apple.com/kb/HT1147?viewlocale=en_US
    3. Lack of free space on your hard drive: if this drops below about 15GB you can run into problems like data corruption and general slowness.
    How big is your hard drive, and how much free space do you actually have?

  • Hard Drive Volume Needs Repair...........Please Help

    My Power/PC G4 with dual 1.25g processors with OS 10.4.11, is running very slow. I get the spinning beach ball whenever it tries to load anything from disk. I used disk utility to verify the hard drive. I got the following message;
    Volume Header needs minor repair
    The Volume needs to be repaired
    1HFS Volume Checked
    Volume needs repair.
    I followed the instructions in Disk Utility to start my computer from my OS 10 install disk. The Disk Utility instructions gave the following instructions;
    1. Insert OS 10 Disk
    2. Hold down option key and start computer
    3. Select Install and click arrow
    4. Open Disk Utility
    5. click install
    6. open disk utility and click to repair
    I followed the above but once I did step 3, I was on my way to do a new install.
    Followed everything asked for on the screen, the next click was to start install.
    Never once anywhere did I have the option for #4 above (open disk utility). I dont know what I am doing, just following directions. I aborted the operation as I did not want to clobber my installed 10.4.11.
    Please tell me what I did wrong or how to get Disk Utility running from my OS10
    install disk so I can run disk utility repair.
    Thanks
    Paul

    Click here and follow the instructions. If there's no Disk Utility option in the Installer menu, use fsck.
    (53195)

  • My back up is not working. I get a error message, "internal disc needs repair" Any idea what this means?

    Hi, as above, back up not working, message "internal disc needs repair". Can somebody help with the meaning of this.
    Thank you.

    click "utilities folder">open "disc utility" click on your disc> click "repair disc" in the lower right hand corner 

  • Mac Pro Slow Shutting down Disk Ut says needs repair

    Hi hope someone can help,
    My mac pro has been taking a long time to shut down recently and this morning when i booted up all i had was a black screen with my mouse pointer (really weird).
    I used Disk Utility to "verify disk" and it said that repairs were necessary. Here's the log:
    Aug 24 08:31:55: Disk Utility started.
    Verifying volume “Aygies Raid”
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Incorrect block count for file PACESupport.plist
    (It should be 0 instead of 1)
    cking multi-linked files.",0)
    Checking Catalog hierarchy.
    Checking Extended Attributes file.
    Checking volume bitmap.
    Checking volume information.
    @ needs to be repaired.",1)
    Aygies Raid
    Error: The underlying task reported failure on exit
    Disk Utility stopped verifying “Aygies Raid” because the following error was encountered:
    The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair
    I have a clone of my drive on an external drive so i booted from that i tried to repair permissions on mac pros drives but it said repairs weren't needed, Log:
    Verifying volume “Aygies Raid”
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Checking multi-linked files.
    Checking Catalog hierarchy.
    Checking Extended Attributes file.
    Checking volume bitmap.
    Checking volume information.
    The volume Aygies Raid appears to be OK.
    Mounting Disk
    1 HFS volume checked
    Volume passed verification
    But then i booted from the mac pro again and it said that it needs repair! I used disk warriour and this is its log:
    DiskWarrior scanned the disk named "Aygies Raid" checking all files and folders for damage and potential
    compatibility problems.
    Permissions:
    Started verify/repair permissions on disk disk2 Aygies Raid
    Determining correct file permissions.
    The privileges have been verified or repaired on the selected volume
    Verify/repair finished permissions on disk disk2 Aygies Raid
    Disk: "Aygies Raid"
    The Property List data was checked in 17,785 files.
    The Resource Data was checked in 9,721 files.
    The maximum Folder Depth on this disk is 17. This does not exceed the maximum recommended depth.
    The System Symbolic Link Files were checked and no problems were found.
    Location: "Desktop"
    File: ".a23t.obdev.LSD.plist"
    Detected that Property List data is damaged and cannot be repaired.
    XML parser error:
    Unexpected character
    at line 1
    Old-style plist parser error:
    Unexpected character '0x4' at line 1
    Location: "Aygies Raid/Users/aygie/Library/Preferences/"
    File: "com.SysternatemsCorporation.StudioExcellence.plist"
    Detected that Property List data is damaged and cannot be repaired.
    XML parser error:
    Unexpected character at line 1
    Old-style plist parser error:
    Unexpected character '0x0' at line 1
    Location: "Aygies Raid/Users/aygie/Library/Preferences/"
    File: "com.EtworataCorporation.Zonesys.plist"
    Detected that Property List data is damaged and cannot be repaired.
    XML parser error:
    Unexpected character at line 1
    Old-style plist parser error:
    Unexpected character '0x0' at line 1
    Location: "Aygies Raid/Users/aygie/Library/Preferences/"
    File: "com.AppersEurope.Sickle.plist"
    Detected that Property List data is damaged and cannot be repaired.
    XML parser error:
    Unexpected character at line 1
    Old-style plist parser error:
    Unexpected character '0x0' at line 1
    Location: "Aygies Raid/Users/aygie/Library/Preferences/"
    File: "com.Roverbetter.Eclecticism.plist"
    Detected that Property List data is damaged and cannot be repaired.
    XML parser error:
    Unexpected character at line 1
    Old-style plist parser error:
    Unexpected character '0x0' at line 1
    Location: "Aygies Raid/Users/aygie/Library/Preferences/"
    File: "com.Hostcyte.Craziness.plist"
    Detected that Property List data is damaged and cannot be repaired.
    XML parser error:
    Unexpected character at line 1
    Old-style plist parser error:
    Unexpected character '0x0' at line 1
    Location: "Aygies Raid/Users/aygie/Library/Preferences/"
    Explanations:
    Folder Depth: This number indicates how many folders are nested inside each other. If a disk contains only three
    folders and Folder A is inside Folder B and Folder B is inside Folder C, then this disk has a maximum folder depth of
    three. Folders nested too deeply can cause software compatibility problems.
    Property List: This is a standard file format for storing data and is often used to store preferences. The names of
    these files normally end with a .plist file extension. Corrupt property list files can cause system instability.
    Resource Data: This is an older file format for storing data and was often used to store preferences. The names of
    these files normally end with a .rsrc file extension. Corrupt resource data files can cause system instability.
    System Symbolic Link Files: These are files used by the operating system that are similar to aliases. If these files are
    damaged it may prevent startup or cause system instability.
    Time: 24/8/07 08:44:56
    DiskWarrior Version: 4.0
    Went back to Disk utility and now it says that my hard drive doesn't need repair! whats going on! can anyone help?!
    Thank you

    Two things off the top:
    128MB are GUID partitions that are not user volumes.
    There is also a 200MB EFI partition as well.
    Drive Genius needs to get their program updated.
    You need to work from an "emergency" boot drive to repair your boot drive, RAID or no. I hope you are and not from CD or DVDs.
    Forget about Permissions. They are very minor. They only have to do with ownership and security and based on what is in
    /Library/Receipts
    Trying to verify? all you want to do is repair and rebuild.
    If you ran DU and DW and did repair and rebuild and WROTE NEW DIRECTORY and the problem remains, erase and restore, or...
    +I am useless with RAID and have no idea...+
    Don't use it except to test, learn, experiment with. But not for system drive.
    Above I asked, "are these a matched pair of drives" ie, same make, (looks like same size), vendor, model? they should be. Less chance of trouble if nothing else.
    ON the boot volume, do a Get Info when you click on the drive, look for "Ignore Ownership on this Volume" and make sure it is NOT CHECKED. It can't be to repair permissions and be bootable.
    The underlying cause of disk errors may be marginal or bad RAM. Test those FBDIMMs. Run Apple Hardware Test and Memtest (even Microsoft uses Memtest for Vista).
    Drives rarely break. Systems do. Directory and btree catalogue and volume information blocks do.

  • Need urgent help with RAID failure on Graphics server (running OSX10)

    Hey.
    Here's the deal... Our graphics department has a MAC G4 (fully upgraded. newest patches, OS, etc.) that's got a 4 port SATA RAID controller. They use this with four 750GB hard drives as an external RAID (the OS is on a seperate, 65GB hard drive). The way it's set up, through Apple's OS, is we have the four 750GBs in pairs... those pairs are striped, and then the two sets of striped 750s are mirrored. This has worked just fine for a number of months, but we recently had a power surge, and now we're unable to mount "Monkey" (the name of the 1.4TB array).
    See the below screenshots for more clarification.
    http://www.amcdoors.com/lorenzo/raidsetup.JPG
    This shows the RAID card, and the four SATA cables coming out of it.
    http://www.amcdoors.com/lorenzo/leftside1.JPG
    As you can see in this and the below screenshots, this shows the 1.4TB Striped set as 'online', but the two below (the two 750GB hard drives) show up as "offline".
    http://www.amcdoors.com/lorenzo/leftside2.JPG
    this shows the actual drive i click on. same thing
    http://www.amcdoors.com/lorenzo/leftside3a.JPG
    If i click the entire array, you can see how it's set up (the Mirrored RAID set consisting of the two Striped RAID sets). The RAID sets (all 3 of them) are showing up as online, yet the drives are offline. No idea why. The drives are all powered, and are spinning, and plugged in.
    http://www.amcdoors.com/lorenzo/leftside3b.JPG
    when you click "Monkey Drive", nothing shows up in it. i don't remember if anything ever used to. if you click 'mount', nothing happens.
    http://www.amcdoors.com/lorenzo/leftside4.JPG
    http://www.amcdoors.com/lorenzo/leftside5.JPG
    this shows the exact same problem as the first RAID set.
    http://www.amcdoors.com/lorenzo/verifyRAIDset1.JPG
    If you try to Verify the RAID set, it shows that no repairs are necessary
    http://www.amcdoors.com/lorenzo/verifymonkey.JPG
    If you try to verify Monkey, you get a "Volume Needs Repair" error... but when you try to repair it, you get this:
    http://www.amcdoors.com/lorenzo/repairmonkey.JPG
    Really need help; this is a pretty critical problem. Someone that's familar with RAID solutions on MACs please help me out. We can't risk losing any data if at all possible.
    Thanks
    ~Lorenzo

    You might want to post this to the Server Products forums.

  • HD problem - disk utility says "1 HFS volume checked"    "Vol needs repair"

    This all started with very slow response when applications were opened on iMac purchased 10/07 - went to Disk Utilty and tried to Repair Disk - but not allowed to click on that option(still grey). So, went to Disc 1 of Installer set of disks , inserted in drive and attempted to reinstall Mac OS X that came with Oct '07 (Tiger-right before Leopard became standard) purchase. When I get to the Select A Destination part of the Install MacOS X directions, there are no choices(ie- HD not recognized). Went to disk utility option available with the Installer disk and did a Repair Disk option. Following messages in RED
    Invalid Volume Header
    Invalid Mode Sgtructure
    The volume Mac HD needs to be repaired ( ie- Volume check failed)
    then Disk Utility boxpops up andsays Error: The underlying task reported failure on exit
    Finally
    1 HFS volume checked VOLUME NEEDS REPAIR in red
    Huuuum.
    Next step? I am using my wife's PC to send this HELP message and it's painful. Rescue me as the song says! Is it time to box up for Apple store visit, or ......

    Houston, welcome to Apple Discussions.
    It appears you have some directory damage on your hard drive. Disk Utility cannot fix some of these type problems. DiskWarrior can probably fix your problem. DiskWarrior by Alsoft
    http://www.alsoft.com/DiskWarrior/index.html
     Cheers, Tom

  • TM disk needs repair but won't unmount.

    Hi,
    I've been having problems with this TM disk since new but I can't work out what to do. The disk is a Seagate 1.5TB with my MacPro backed up to it and a sparse image on it as my MacBook backup.
    The disk only has one volume on it. It has done strange things in the past like return an error on the initial backup of the MacPro after about 900GB of data and when I wiped the drive and tried backing up again it returned an error at about the same stage. Subsequent incremental backups worked so I continued to use it but I have never been able to eject the drive. I have always got the "something is using it" dialog box. I could only safely power it off by restarting the MacPro and turning it off before it booted. I checked the disk in disk utility and it said it needed repair but could not be repaired. After hearing about trouble with these drives I returned it for a replacement. I got an error on the first backup again with the new drive but subsequent incremental backups were OK so I left it. I checked it in disk utility yesterday and it said it needed repair but would not unmount for the repair. I have reset the FW800 port in the past and that didn't seem to make any difference. Other drives in this enclosure (SOHO Tank, Oxford chip) work and unmount OK. I don't know whether this is a TM issue or I've got another flakey drive. I'm tempted to send the drive back to Seagate again as I don't feel secure with this as my backup.
    Also, occasionally when I go into TM via the TM icon in the dock, I only see backups up to the day before yesterday in the timeline at the side. If I cancel TM and relaunch I get the full set in the sidebar (yesterday and hourlies for today).
    Any thoughts?
    Thanks,
    Brian

    Magicpony wrote:
    Hi,
    I've been having problems with this TM disk since new but I can't work out what to do. The disk is a Seagate 1.5TB with my MacPro backed up to it and a sparse image on it as my MacBook backup.
    If possible, you should partition the drive, so the MacPro's backups are in their own, exclusive space. If you ever want or have to delete them, it will be extremely difficult and take a very long time. See #4 in the Frequently Asked Questions *User Tip,* also at the top of this forum.
    Other drives in this enclosure (SOHO Tank, Oxford chip) work and unmount OK.
    Try repairing it from the copy of Disk Utility on your Install disc. (Boot up from it, select your language, then on the next screen select Utilities from the menubar, then +Disk Utility.)+
    Also, occasionally when I go into TM via the TM icon in the dock, I only see backups up to the day before yesterday in the timeline at the side. If I cancel TM and relaunch I get the full set in the sidebar (yesterday and hourlies for today).
    Try the things in #E4 of the Time Machine - Troubleshooting *User Tip,* also at the top of this forum.
    It's rather odd, but renaming your computer may help: http://docs.info.apple.com/article.html?path=Mac/10.6/en/21208.html

  • HD needs repairing but optical drive NOT reading discs.

    My problem is this: I have a June 2010 21.5" iMac which is out of warranty.   Disk utility says my HD needs repairing.  No problem, I have the original install DVD.   Trouble is my DVD drive has suddenly stopped reading discs! I rand Apple tech support for help and I asked them if I could simply buy a usb external DVD drive and re-install that way? Since I will also have to reinstall from DVD; Logic and Pro-Tools.   He said no!   Consequently I'm booked in for repair next week at an Apple store.
    Is that a way of Apple making money and I CAN actually repair the HD via an external usb hard drive??  Did he convince me to take it to an Apple store so they gain cash from me that way?
    Do I take it in for repair?  The Apple Tech Support guy gave me no clue as to how much this is going to cost.
    Or don't take for repair and buy an external usb DVD drive?
    I struggle with computers at the best of times!
    Any help greatly appreciated.

    I've used ancient Compaq "Multi-bay" external drives and a variety of other random-vendor external USB drives with Apple laptops and Apple servers, and they've worked.  In several cases, I was using the old Compaq drives because the integrated DVD drivers were dusty or had failed — DVD drives of all sorts can and do fail, Apple, third-party and otherwise — and the Compaq drives were handy.  That Compaq Multi-bay drive booted an Apple Xserve Intel box with a bad slot-loader, too. 
    If one drive fails, debugging suggests trying a different drive.
    If you don't want to be concerned about compatibility, order one of those (not cheap) Apple external DVD drives.  I now have a couple of those around, and they work.
    It's quite true that newer Apple laptops don't have DVD drives, though most of these systems offer a recovery partition on the disk, the ability to create external recovery partitions on the device of your choice, newer ones have Internet-based recovery if you're lacking a drive (booting from Apple's servers via the Internet), and the Mac boxes I've tried will boot from various random USB devices including the old other-vendor DVD drives, and from the Apple external DVD drives.  With another Mac with a compatible wiring connection (Thunderbolt and cable on newer Mac systems, and FireWire and cable with a pair of older Mac systems), Target Disk Mode (TDM) can be used.  The installations can also be copied to other hard disks, and it's also possible to network-boot most any Mac system, if you have a server around.  And there's also the remote disk installations that some Mac systems can offer.   Put another way, there are various and good alternatives to device-integrated DVD drives.
    DVD is an old and mechanical technology, and it's variously a flaky one.  Given a choice, I'd rather boot OS X off an external hard disk or solid state or flash device or via TDM, just because it's faster and more compact.  This because I'd rather not carry around the weight and volume of that DVD drive all the time, on the off chance I might sometime eventually need to recover.  But an external random DVD device does work, too.
    As was mentioned else-thread, there is no special chip required in the drives.  Given the command set and status-level differences from drive to drive I've seen and given the failure rates I've witnessed with DVD and CD drives from all vendors including Apple, I wouldn't expect every drive to work, but I've seen nothing that Apple does here that would prevents a random drive from working.  And I've used random drives...

  • Booting with DVD problem!!! Disk needs repair

    Hello,
    Ran disk utility and I got the «disk needs repair» error. Please boot from install DVD
    Okay no panic I try to do it.
    First try holding C key and with the snow leopard DVD (retail not the one I got with the computer) = failure keeps me on the apple window
    Tried it with the DVD I got with the macbook pro while holding the C key again = faileure keeps me on the apple window
    The computer works fine except it tends to bog down
    I'm running lion and my macbook pro is less than a year old
    I also have Norton antivirus (because YES there are viruses again - anyway norton told me there were when I scanned my HD a while back -). I tried disabling it totally and tried the same things but to no avail...
    Can anyone help? Have I overlooked something obvious? Or is somehting more complicated necessary?
    Thanks in advance

    If you've installed Lion, the 10.6 disk won't help you. You need to hold down Command-R during boot to bring up Lion recovery ... you can then run Disk Utility.
    Oh, and agree with Allan, dump Norton. If you want an antivirus, install ClamXav from http://www.clamxav.com

Maybe you are looking for