Need Report in which using PC/CC , planned order could be found out.

Hi All,
Is there any standard report to find a Plan report for 2009 using which one could see the orders planned for respective department and where we can book time. Any report ( if any) in which using profit center or cost center the planned orders can be found out.
Please do let me know.
Regards,
Ajay

reenek:
Welcome to the Apple Discussions. From what you've described the library to keep is the iPhoto Library_1. But before you do try the following:
1 - Rename each iPhoto Library folder so that you can easily identify them. They can be named anything you'd like, Library 1, Library 2, Library 3 or whatever.
2 - Launch iPhoto with the Option key depressed and, when asked, locate and open Library 1. Check it out as to contents.
3 - do the same for Libraries 2 and 3.
4 - now you'll know exactly which one to keep and which to delete.
5 - now download and run iPhoto Library Manager to rebuild your remaining library. It creates a new library and copies the files and data it needs from the old one, leaving it untouched and unchanged. If you have some unneeded folder in your library they will be ignored by iPhoto Library Manager. Here's how:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: It can take some time to create the new library if you have a lot of photos. One user reported that with a library of about 5,000 images it took about 12 hours so plan ahead.
Good luck.
Do you Twango?

Similar Messages

How to get the Report Names which use a Folder in Discoverer Administrator?

Hello All,
How could I get which Reports in discoverer Desktop are using a particular folder in Discoverer Administrator?
Or
How to know which Discoverer Desktop Reports are being derived from a folder in Discoverer Administrator?
We have Oracle 9i DS installed and have a Custom Folder Created in the Administrator, and want to know exactly which Reports/Workbooks are using that folder?
Thanks in advance :)

Well Abhijit,
The eul workbooks have been created by oracle specifically to analyze your eul and make your work easier!. So, I prefer this way to view the information about my eul in a report format in the desktop. Try it! you may like it.
If you want you can follow these steps:
Run the script called eul5.sql located in <discoverer_installation_path>\discoverer\util in the user who own the eul in the database.
Then import the eul5.eex file located at <discoverer_installation_path>\discoverer\ in the discoverer administrator.
Then login into desktop and open the reports in the database, you can see a report called[b] EUL Workbook Management. Open that and goto the sheet named Workbook Dependency - Folders & Items Lookup. I think it the last but one worksheet in that workbook.
Hope it helps you!

Report for PO's/Pr's/Planned orders with exception code

Hi all,
Is there any report which lists out Purchase Orders/Purchase requisitions/Planned orders for a specific exception message number?
For example when MRP is run some times the finish date for a planned order may be in past (exception message number 07). I would like to get a list of all the planned orders with exception message number 07. Similarly i would like to get PO's/PR's for a specific exception code.
Any help is highly appreciated.
Thanks,
Avani.

Hi Neetha,
You can use the Collective access tab on the MD06 T-Code, don't enter a material number, only the plant number and MRP Controller number. Then click on the tab marked Exception Groups, check box number 7 and execute the report. This will give you a list of all materials with exception group 7. If you need it as a report. Once the report comes up you can click on MRP List on the tool bar at the top of the page and then click print. This will format it so you can download it into excel by clicking on the Local File Button. When the box comes up click on spreadsheet and save it to your hard drive as an excel spreadsheet.
Hope this is of some help to you.
Debbie

Using Planned order Change BAPI with out changing date

Hi
I have a planned order with start date in future.
With in a program, I want to call the planned order using the FM BAPI_PLANNEDORDER_CHANGE to re-explode the order BOM.
I find that only if I change the order start date to system/current date, the planned order BOM gets updated/re-exploded. Else there is no change in the order BOM.
My requirement is to re-explode the BOM with out changing the order dates. In the function module I am maintaining "X' against BOM_EXP_FIX_IND.
But when I do it manually using MD12 and explode BOM with out changing the future start date, the order BOM gets updated.
Please help on this. Or is there any other FM/BAPI for this purpose.

Dear Pradeep,
you could try to set DET_SCHEDULE = X with out
FIRMING_IND --> No
BOM_EXP_FIX_IND --> No
Let me Know if it modification setting have solved your problem and i have useful for you,
Daniele

Need Report based on "CUSTOM DATA field @ Shop Order Maintenance"

Need the REPORT based on CUSTOM DATA field.
Requirement - I am having the CUSTOM data at Shop Order Maintenance that is called as XXX, I need some report in SAP ME which can display the SFC related to particular Shop order based on XXX Number.

Hi!
As far as I remember there is no such base report. So, you may try to create it using SDK or request it as custom enhancement from SAP.
If you want to create it using SDK, you can find the required data for report in CUSTOM_FIELDS table.
Regards,
Alex.

I lost my ipod today and i tried using "find my ipod" in icloud using my friend's ipod and i found out my location services was turned off. please help. i'm desperate. i paid for it and its the 5th gen. HELP.

PLEASE PLEASE PLEAAASEEE HELP!!!!
As i said up there , i have lost my ipod touch 5th generation today. worst day ever. im 14 and i paid for it with my own money. $317!! i was so proud of myself. so i went to the mall and i put it in a bag and got home and went to the park behind my friend's house. now im not sure if i brought it with me to the park (dont think so) or it fell in my friend's room after i came home from the mall. but i seriously can not find it and im REALLY sad. i have been balling my eyes out throughout the whole day and me and my five friends including my parents and my friends mom have been looking for it. i heard something about telling the police or something and they would help?? i'm not sure about that. cause why would they wanna help a 14 year old girl find an ipod touch when theres other very important matters. Even though this is SUPER important to me, it may not be to them. ik this is all my fault. mother always said "dont leave it in your back pocket" and of course i do while i skateboard. wow. im stupid. i need to gaurd that thing with my life. its very expensive. please help. this ipod is like my life. it was logged onto instagram and facebook and a bunch of social sites. yes, i have a lock on it but cant they go to a store and say "i forgot my password" and they hack into it? i changed my instagram password and apple ID password so far. but i really need to find this ipod. tomorrow im going to the park to look for it in the grass. HOPEFULLY IT IS THERE. then im going to the apple store if i dont find it. i will go to extreme measures for this ipod. ITS THE FIFTH GEN. BLUE. its beautiful. i already broke my 4th gen ipod like 2 times. but thank you for reading all this.. i need help D:

- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have to iPod play a sound via iCloud.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
There is little chance of recovering your iPod. The police will do little. It it is turned then they can contact you.

Where will I find the Tumblr Savior icon? Installed the add-on, but can't use it. No information could be found on Mozilla/Firefox forums/help topics.

I have searched the Firefox for PC help topics using multiple searches, re-installed the add-on, checked Yahoo, checked the developer website, I have even searched Tumblr--and the best answer was there (ie instructions, screen caps) and required me switching to Chrome.
I am no computer professional, but I would like to use the add-on you make available. I have checked multiple sources, including your own. Tell me what I am doing wrong...

I'm not sure whether you've tried the usual starting points. In the newish 3-Bar(hamburger) Button, click on customise and search in the palette for the icon. If it is there drag it to one of the toolbars.
If not, see if it is stranded on the not-showing Add-ons Bar. Right click on a toolbar space and check Add-ons Bar if it is there. The bar will show at the bottom of the screen and may have some icons on it. Those icons can usually be dragged up to one of the top toolbars.
Recent reviews of this Add-on don't look encouraging.

Planned orders table/report

Hi all,
IS there any table/report which lists out the Planned orders and the converter Purchase requisitions from planned orders? I want a report/table which lists out Purchase requisitions and the related Planned orders.
Thanks,
Avani.

Hi,
no standard report for your reqirement
pls check planned order table
PLAF - planned order table
once converted planned to pur. req, there is no table to store this converted data
EBAN - Pur. req table
Hope you understand
Regards,
Sankaran

Can I releases planned orders in planner workbench using inventory planner responsability (IO)

Can I releases planned orders in planner workbench using inventory planner responsability (IO), in IO manual I found following information :
Planner Workbench
You can use the Planner Workbench in Oracle Advanced Supply Chain Planning to act on recommendations generated by the planning process for a plan. You can implement
planned orders as discrete jobs or purchase requisitions, maintain planned orders, reschedule scheduled receipts, and implement repetitive schedules. You can choose all
suggestions from an MRP plan, or only those that meet a certain criteria. In Oracle Inventory Optimization, Planner Workbench is used to perform tasks such as setting up
item attributes, setting up supply chain BOM, and analyzing time-phased safety stocks.
my question is Oracle Inventory Optimization, Planner Workbench can´t release planned orders.
Thanks in advance
regards James

Hi James,
We cannot release planned orders from IO workbench.
IO is for safety stock planning, not for releasing planned orders. That is done from an ASCP plan which uses the IO plan as demand schedule.
Regards,
Mohan Balaji
NOTE: Please mark the post as Helpful or Answered if the update has really helped you. This would also bring the thread to logical conclusion and will be helpful for the viewers.

Error while creating a Planned Order

Hi SAP Experts,
I have an error encountered while creating a Planned Order which is "Mode linkage problem with mode number".
Diagnosis:
An application program called an LCA routine and the following error occurred:
An order has at least one condition with mode linkage with the same mode number. The activities of this condition must have compatible modes. The modes are compatible when each mode of one activity has a mode for the other activity with the same mode number. The first activity that violates the condition is given in the return code table in ABAP.
Please enlighthen me what is this error and what should be done to this error.
Thanks in advance,
Raymond

Check the PPM or PDS being used in the Planned Order.
Most likely you have a Setup Activity followed by Produce Activity. However the Mode (i.e. Resource) used in the two activities are different. The same Mode needs to be used both in Setup and corresponding Produce activity.
Hope this helps,
somnath

Planned order Vs.Purchase order

Hi,
can you tell me major differences between a planned order and a purchse order.

Hi,
Planned Order : Planned Order is generated by the planning logic, or arithmetical procedures, of the system itself with MRP set. When MRP is re-run after the closed-loop transactions are fed back into the system, all existing planned orders are deleted and a new set is generated. However, the newly generated planned orders may be identical to the previous set in timing and quantity, so that it will appear to the system user as if the old plans have simply been somewhat revised. The use always of planned orders in closed-loop MRP ensures that plans are always in synchronisation and that the planner does not need to concern himself with rescheduling messages.
Purchase Order: The purchase order is a formal company document which conveys the instructions or detail of a required supply. The legal role of the purchase order in forming the contract of supply will vary with circumstances: most usually, it will be an offer, such that the supplier's acceptance of it at the price mentioned seals the contract, but it might alternatively be the acceptance of an offer (say, an order placed immediately against the supplier's tender.) The document itself may also be used by the company simply to convey detail, perhaps being a call-off for material against a yearly contract already in existence. The purchase order might convey a summary of substantial material to be delivered at various times in the future by special order forms.
For more follow the link:
http://www.xtuple.com/docs/userguide/ch03s09s03.php
Regards,
Biju K

Planned order scheduling in mrp

hi
iam trying to run MRP at my client place
facing problem in planned order dates
i choosen tequirement type BSF and strategy group as 11
in md 61 pir was given in a month of june2008(monthly)
after mrp run at modo4 iam getting planned order with
execption message 64 called order date in past
means iam getting planned order START DATE AND END DATE IN THE MONTH OF JUNE
where as i need to my planned order satar date in MAY MONTH and
end date must be 1st of june
means i given PIR which is my start of my june month
checked scheduling parameters which says backword scheduling, and i choosed planning mode 3 and leddtime scheduling
plz suggest which setting effects the planned order start and end dates??
regards
sasikanth

hi
i selected schedule margine key with 0 flots (key000)
and chossed *LEED TIME SCHEDULING (in mrp controll parameters :-scheduling 2 at MD02 )
how the reduction strategy helps in this case ,casue i am doing lead time scheduling system has to consider only routing time ??? right ??
plz suggest how to arrest message 64
regards
sasikanth
message 64 diagnosis enclosed
64: Production finish after order finish (P4)
Message no. MD427
Diagnosis
The production finish date calculated using the routing lies after the order finish date that was calculated using the in-house processing time in the material master record.
As the system uses the order finish date in the planning run, this situation may lead to material shortages if production is not finished until the production finish date calculated by the system.
System Response
This exception is displayed in the MRP list and in the current stock/requirements list.
Procedure
Check the times in the material master record and in the routing.
Check whether the order has to be rescheduled in.

Planned order creation IDOC

Hi Experts,
i've a requirement where i need to develop a custom IDOC for Planned order creation. is there any standard IDOC for Planned order creation and if it is there then provide me the complete details like IDOC name, message type name, posting and selection program names etc.
if i need to create a custom idoc then wht is the procedure for it.
Regards
Faisal

Hi Abdul,
You can use the below details for achieving the below requirement:-
Message Type :- LOIPLO
Basic Type :- LOIPLO01
You need not create any custom IDOC type as we are having a standard IDOC type available within SAP, but you need to write a custom function module to read the data from the IDOC segments and then call the below BAPI to post the Planned Order.
Check the input parameters of BAPI and gothrough the documentation of the Basic Type in WE60 transactions, whether all the necessary input parameters of the BAPI are covered in the standard IDOC type, if not then we need to customize the standard basic type to meet the requirements.
Bapi which needs to be used is BAPI_PLANNEDORDER_CREATE.
I think all these inputs will solve your purpose.
Thanks,
Mahesh.

Increase quantity of Planned Orders upon creation by MRP

Hello gurus.
We want to add a certain percentage to the quantity in Planned Orders when they are created by MRP. So that we can have a "cushion" for whatever waste we may have in Production.
We explored the "Assembly Scrap" field in the Material Master, but the problem is that this is added to the costing of the product. And we don't want to alter the standard price of the material.
What we are looking for is way that when MRP runs, and it creates Planned Orders for Production, it can automatically add certain percent (that we can maintain in a custom table).
They want this on the Planned Order so that this also drives component procurement.
Is there a way to this standard? Or perhaps a User Exit I could use so this is included when MRP creates these planned orders?

Fernando,
You are assuming that you need 'a little bit extra' for every planned order. Most people think that this approach is unnecessary and leads to creation of non-productive stock/wip.
Assume one part number, with 10 weekly requirements, each for 100 pc, lot for lot, Make to stock, and you decide to implement a method that increases all of these planned orders by 10%. In your model, you will create 10 planned orders for 110 pcs each, or 1100 pcs; against your 10 requirements of 100pc (1000pc requirements total).
I don't know how variable your production yields are, but let's assume normal (six-sigma) variation is between 90% and 110% of the target quantity (which is why you have inflated the output by 10%). Let's also assume normal distribution; that half of your execution orders will output bwtween 90% and 100%, and half will output between 100% and 110%. To cover the absolute shortages for each individual requirement, you don't really need 100 extra pieces in stock, you only need 10 extra piece in stock (and, of course, you must have planned this similarly in all of the dependent materials). Once the 10 'extra' pieces are in the planning supply chain, you will have covered all of your 'normal' shortages.
In essence, you don't need to increase EACH order by 10%, you only need to cover some multiple of the standard deviation of the yield ONE TIME. This is the concept of safety stock. SAP, as you note, allows you to increase supply over demand by a fixed quantity (static safety stock), allows you to actively calculate the quantity of safety stock by using a moving time-based formula (so-called 'dynamic safety stock'), and also allows you to alter the supply so that it comes in earlier than you need it (safety lead time). These techniques are pretty much standard on any ERP system, not just SAP. They exist because people have tried lots of other methods to increase service level, and these standard methods work best, which means they give a known way to optimize the balance between cost and service. In addition, when you use these methods, you don't have to worry about the fact that SAP will not support your 'special' programs, both for today and also into the future when you do system upgrades.
I WILL say that if the cost of the planned material is low, and the costs of the lower level materials are also low, and the service level required is high, then your non-standard method offers one advantage, that it is relatively easy for the users to understand. Just realize that you will be creating some stock down through your supply chain that will not add to your service level. In many companies, this is a good way for a planning manager to lose his job.
Finally, regarding your proposal for a batch job that will inflate the qtys of the planned orders. If you are going to write a program that will do this, you can also write it to 'unfirm' the orders prior to saving. You should also not forget to consider your lot sizing techniques, should you decide to take this path.
Regards,
DB49

Plan order table

Hi PP Gurus,
I am developing MRP report for a client in which we are calculating the delay in plan opening period means difference between plan opening date of plan order and actual production order creation date .
For this we are getting production order creation date from production order but this order is creating from plan order so we are not getting plan opening date from plan order as the entry of plan order gets deleted from PLAF table .
Is there any other table of plan order for getting the plan order data even after converting it into production order?
Regards,

Hi!,
No you won'tfind that data once the planned order is converted to production order. You can do one thing. Please develop an enhacement which will fetch the planned order data from PLAF table and will save it to a ZTABLE before the planned order conversion, so that you can use the same later on. You can also update the created production order number in that table.
I hope this will help in solving your issue.
Regards,
Uday

Need Report in which using PC/CC , planned order could be found out.

Similar Messages

Maybe you are looking for