Need Sample Configuration in ACS 4.2
I need configuration of ACS 4.2 for logging domain users into Network Devices.
What is the current status of your deployment? Have you already integrated ACS 4.2 with AD/domain? If yes, are you able to fetch the active directory groups in group mapping section.
If you still need to integrate ACS with AD, please broswe the below listed post and download the word document to review.
https://supportforums.cisco.com/message/4076705#4076705
Once done, try and login to your network devices via domain username and password. In case it doesn't work, please go to reports and activities > failed attempts.
Let us know how it goes.
~BR
Jatin Katyal
**Do rate helpful posts**
Similar Messages
-
Folks,
I wrote a small program to parse the configuration. I am looking for a sample configuration of a Edge Router ( preferably 7200 ) having lots of configuration data including VPN , Martini Tunnel etc. I need to test my parser.
Any help will be greatly appriciated.And....I am looking for a sample program to parse...could you help me...
-
NEED EXAMPLE AD INTEGRATION CONFIGURATION ON ACS 3.3, 5.3
Hi,
Please give example of Active directory configuration related to radius in Windows server 2003.
The same way need Step by step to AD configuration in ACS.
Please help on this. I searched alot but not getting any exact docs which say both of these things.
I need to configure End User (Wireless or L3 Device) --> ACS --> LDAP for Authentication
Regards,
SakthivelBefore you integrate ACS 5.x to the AD, ensure that the TimeZone, Date & Time on the ACS matches with that on the AD primary domain controller. Also, define the DNS server on the ACS in order to be able to resolve the domain name from the ACS 5.x. Complete these steps in order to configure ACS 5.x Application Deployment Engine (ADE-OS):
Please follow the below link for step by step configurations because it's not possible to paste here full steps:
http://www.cisco.com/en/US/products/ps9911/products_configuration_example09186a0080bc6506.shtml -
Hello,
I'm wondering if someone can point me to an updated Sample Configuration doc to set up the following :
Cisco 1121 ACS ver. 5.3 as Radius server
Cisco 2500 WLC serving Light AP's
Windows 2008R2 Active Directory as backend authentication server
Basically my client wants to use an AD security group to allow access to thier Wireless AP's for their user community
I "think" I have most of the pieces in place. Just a little fuzzy on the full picture. Also, to complete this config, will I need any certificates? What protocols (client) are best to use, etc?
Thank youHello,
I think the link below might help you out:-
https://supportforums.cisco.com/docs/DOC-21679 -
Initial configuration of ACS 5.1 for EAP authentication for Wireless clients
Hi,
I have set-up with below devices :
Wireless LAN controller 5508
LAP 3302i
and ACS 5.1
since i am new in ACS 5.1 configuration , I need so information to go ahead to configure ACS 5.1.
which EAP method to use for wireless client authentication ? what is the best practice ?
I have gone through some cisco documents and it shows that best practice is to configure PEAP but for the same , I need to install certificate in ACS server as well in client PC. is that so ?
I have no clear picture for this certificate ?
from where i can get this certificate or do i need to purchase this certificate separately from cisco. how to install it in ACS server ?
I will be obliged to get atleast initial configuration for ACS 5.1 to enable the EAP method,
I need GUI based initial configuration for ACS 5.1
This mentioned ACS 5.1 is installed on ACS 1121 hardware appliance.Hi,
which EAP method to use for wireless client authentication ? what is the best practice ?
-> I would advise the most widely spread EAP method, which has the best ratio security/easy to deploy: PEAP with MSCHAPv2, which is available by default by all windows machines.
I have gone through some cisco documents and it shows that best practice is to configure PEAP but for the same , I need to install certificate in ACS server as well in client PC. is that so ?
-> You will always need to install a server certificate, however, there is no need for client certificate because the authentication is based on the MSCHAP credentials exchange, not certificate based. The only requirement on the client regarding certificates is the following.
If you want to validate the server certificate, you have to install the server certificate under the trusted CAs of the clients.
If you do not require to trust the server certificate, you can simply disable the option of server certificate validation.
I have no clear picture for this certificate ?
from where i can get this certificate or do i need to purchase this certificate separately from cisco. how to install it in ACS server ?
-> The server certificate can be a simple self signed certificate that you generate and install on the ACS GUI.
Please feel free to follow this step-by-step guide on
PEAP under Unified Wireless Networks with ACS 5.1 and Windows 2003 Server:
http://www.cisco.com/en/US/partner/products/ps10315/products_configuration_example09186a0080b4cdb9.shtml or in pdf
http://www.cisco.com/image/gif/paws/112175/acs51-peap-deployment-00.pdf.
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it. -
Linksys WRP400 - VoIP Sample configuration guide for VoiceMeUp
Thanks to Linksys for that fine device. Few installations so far with this device and it has prooven his stability and reliability.
Note: Good T38 support and excellent QoS.
Here is a sample of configuration to VoiceMeUp
Linksys WRP400 - Sample configuration guide
[english] - [français]
Enjoy!
For more informations about VoiceMeUp VoIP services, please visit us at voicemeup.com
Message Edited by NothinElse on 08-25-2008 01:09 PMClearly this is too late to help you, but since this is showing up on Google and there are about a thousand views, this answer might be helpful to another.
Once you access the Voice Admin menu and provision your device for your VoIP provider, access to the Voice menu is subsequently "Locked".
Your VoiP provider's system has set a new unique password for the Voice menu once the provisioned device has synced with your providers system.
You should be able to get that password from the control panel on you VoIP account profile under "equipment" or a call to support or an e-mail request should garner the password.
The Login will be "admin" and the password provided will get you back into Voice menu system.
You will also need this password if you want to reset the Voice features back to factory defaults. Because of this system it appears that a WRP400 cannot be unlocked by merely using the reset button. -
I have some devices in my LMS 3.2 Master-Slave ACS-mode, that are, according to the DCR and AAA portlet, not configured in ACS
However I have checked that the devices are in ACS (in NDG and based on ip addresses, unique or by using wildcards)
What could be the reason why LMS can't find the devices in ACS?Hi,
If you have configured the devices in ACS and the LMS and ACS intergrity has been done then we need to break the integrity and redo it once again.
break the ACS and cisco works integrity, restart the deamons and then integrate it once again.
Please let me know if it helps.
Regards,
podhillo -
Ciscoworks - devices "not configured in ACS"
Hi all,
Can anyone explain why Ciscoworks places some new devices in the above category even when the device config, ACS, etc is all configured correctly? I have a handful of devices that keep going into this category and there is nothing I can do to stop it happening - it is a real hassle as you have to then set CW to non ACS mode restart the daemon, delete the entries etc etc.
If anyone can describe how I can get CW to manage such devices properly and possibly even tell me how to stop it happening in the future it would be of great help.
Many thanks in advance (though I know some of you would rather have points ;-)
ScottHi Scott ,
Device will fall to " Devices not Configured in ACS " only in 2 condition :
1. Device is actually does not Exist in ACS
2. It EXist in ACS with different IPADDRESS or HOST NAME.
There is no direct way to delete these devices once they are on the Not Configured
in ACS list. However, one workaround is:
Step 1. Create a dummy NDG group in ACS to include these devices.
Step 2. Delete the devices in DCR and then in ACS.
Note: In order to delete a device from DCR we need to follow this procedure:
1.- Go to Common Services >> Devices and Credentials >> Reports >>
Devices that are not configured in ACS and generate a report.
2.- Now that we have all the devices that we want to delete, please go to
Common Services
>> Device and Credentials >> Device Management and select all the devices
from CS (Common Services database).
3.- Click on Delete and a confirmation message will pop, agree to this.
I hope this will help you
Thanks
Afroj -
Need to configure email alerts for app/web server shutdown
Hi,
I need to configure email alert notification, so that whenever application server or webserver is shutdown/restarted, an email is sent to the group/userid.
I am aware that in Peoplesoft, there is no parameter or functionality which sends an email notification whenever application server & web server restart & shutdown. This is where I need help.
Did anyone setup the email alert notification in any of your environments? If so, please let me know how did you do the setup?
Thanks,
SakkyPlease find the below sample batch program.
this helps to start the appserver automatically and if the status fails this will send email automatically.
This is the another way of findting the status of the app server.
In the below program, by finding the "Done" value on the output screen we can decide if the server is running or not.
Hope you understand this, Kindly let me know if you need further information.
===============================
@echo off
REM Set a temporary variable
SET CONNECT
REM Check the status of the Application server
psadmin -c sstatus -d PSEPM | FIND "Done" > NUL
REM If the server is down boot the server
ERRORLEVEL 1 SET CONNECT= psadmin -c boot -d PSEPM
%CONNECT%
REM Check the server again for status
psadmin -c sstatus -d PSEPM | FIND "Done" > NUL
IF ERRORLEVEL 1 goto sendmail
goto end
REM Sending mail to Administrator
:sendmail
REM setting the path for email command
SET CONNECT= cd D:\PT849\bin\client\winx86
%CONNECT%
REM Below command will send mail to the Administrator
SET CONNECT= psemail -server < server ip> -from [email protected] -to [email protected] -subject "Server Down" -body "Hi, Server is down at this time, unable to boot."
%CONNECT%
:end
==============================
Edited by: Soundappan on Feb 19, 2011 10:39 AM
Edited by: Soundappan on Feb 19, 2011 10:40 AM -
What commands are needed to configure authentication?
I'm running the JaasAcn Sample from a DOS prompt on a Win XP client and am getting 'authentication failed'. My Active Directory Realm is AD.COURSEWIZARD.COM and the KDC FQDN is ad.ad.coursewizard.com. It succeeds when I run the 'Sample' locally on the AD server. If I set 'isInitiator=false' in jaas.conf, it succeeds no matter what I enter for username & password. It seems that I need to configure an SPN.
When setting an SPN, are you declaring that a particular AD user account is associated with a remote service that will be requesting authentication?
Do I have to also use the 'ktpass' command, even though I'm using a Win client?
If I use ktpass, but am just testing with a PC on the Inet, should I just use my IP address for domain since I don't have a FQDN?
Do I need to move the keytab file, created by ktpass, to the client and configure it to use it?
Does the ADS need to have a krb5.conf or krb5.init file? I don't see one under '../drivers/etc/'.
What commands are needed in order to configure the server, and client, to authenticate successfully?
CheersSorry, I haven't seen a nice JGSS for Windows guide yet.
Back to your questions:
1. When setting an SPN, are you declaring that a particular AD user account is associated with a remote service that will be requesting authentication?
IMHO, setspn creates a service-like alias for a normal AD account, so that GSS style server program can use it as a NT_HOSTBASED_SERVICE name.
2. Do I have to also use the 'ktpass' command, even though I'm using a Win client?
ktpass is used at the server side, what you use at client side is unrelated.
3. If I use ktpass, but am just testing with a PC on the Inet, should I just use my IP address for domain since I don't have a FQDN?
Porbably not. Anyway, AD works fine with a DNS. If you haven't one, config the AD server as a DNS server.
4. Do I need to move the keytab file, created by ktpass, to the client and configure it to use it?
No, keytab is used at server side. The client side uses the native credentials cached in LSA after you login to Windows as an AD account.
5. Does the ADS need to have a krb5.conf or krb5.init file? I don't see one under '../drivers/etc/'.
Yes, Java needs the file for both client and server JGSS programs. Normally it should be inside the WINDOWS directory. Somethign weird woun happen if you uses Terminal Services or else. Add -Dsun.security.krb5.debug=true to the Java command line will show you when Java tries to look for this file.
6. What commands are needed in order to configure the server, and client, to authenticate successfully?
You need setspn.exe and ktpass.exe on the server to create the SPN and the keytab file. No tools are necessary on the client side, but MS's kerbtray.exe and klist.exe (attention: MS's klist, not Java's) are nice. BTW, a nice network sniffer (say, Wireshark) is also useful.
I'm not an expert on all these questions, but I cannott resist the temptation to give an answer to each of them. -
Dear everyone
I need to configure Acrobat to display PDF files in Safari, but I have a lot of troubles to do it.
I read a european commission document explaining that
http://ec.europa.eu/research/participants/data/support/sep_usermanual.pdf
If Safari does not display pdf forms in the browser window, uninstall all older versions of Adobe Reader and download the most recent one. First close Safari and then install Reader. Launch Safari and you ought to be able to open the pdf files inside the Safari window. If you install Adobe Reader 10.1.x without first closing Safari, Safari will not display the pdf file inside its browser window until it is re-launched. For further help, please see http://helpx.adobe.com/acrobat/kb/troubleshoot-safari-plug-acrobat-x.html
I have OX S yosemite, I unistalled adobe acrobat, I closed safary and I installed the new version of adobe acrobat
but when I open a web page that I need to allow me to display and modify PDF files it is not working.
I checked the following web page
Troubleshoot Safari plug-in | Acrobat X, Reader X
that is recommending the following:
The AdobePDFViewer plug-in is used to display PDF files in Safari using Acrobat and Reader.
This plug-in is installed as part of the Acrobat X or Reader X installation. The location of this plug-in is:
/Library/Internet Plug-ins/AdobePDFViewer.plugin
but after the new installation with this folder is completely empty and I am still
unable to open these pdf.
Does anybody knows anything else I can do?
Best regards
RamonMoving this discussion to the Adobe Reader forum.
-
Need sample code with RV_INVOICE_CREATE used
Hi everybody!
I need sample code with RV_INVOICE_CREATE or similar FMs used.
The thing is that I do not know how to populate parametres of this and other invoicing FMs....
For example, there are some tables to be passed to RV_INVOICE_CREATE
TABLES
XKOMFK = XKOMFK
XKOMV = XKOMV
XTHEAD = XTHEAD
XVBFS = XVBFS
XVBPA = XVBPA
XVBRK = XVBRK
XVBRP = XVBRP
XVBSS = XVBSS
How to populate them? I mean how to fill them with needed values?
Useful answers will be awarded.
Kind regards, M.RV_INVOICE_CREATE is the function module to create invoice based on delivery .
when you pass delivery number ,it will create invoice ,see the invoice number in vf02,vf03 transaction. and also see the data vbrk,vbrp tables
I have done this development and i have cancelled invoice,reverse goods issue,updated the delivery and again i am createing invoice..see the below progrm to get better understanding.
REPORT ZWM_OVERWEIGHT_FIX no standard page heading
message-id zwm.
======================================================================
Program Name : ZWM_OVERWEIGHT_FIX *
Description : Tool to fix Overweight in delivery line item, *
Used All Function module to cancel invoice , *
Reverse the goods issue ,Update Delivery qty,Create *
invoice *
Author : Seshu *
Date : 05/08/2007 *
MODIFICATION HISTORY *
DATE | AUTHOR | CHANGE # | DESCRIPTION OF MODIFICATION *
--|||--
05/08/07| Seshu | DEVK921979 | Initial *
D A T A - D E C L A R A T I O N *******************
Tables
Tables : vbak,
vbap,
vbfa,
likp,
lips,
vbrk,
vbrp.
Internal Tables
data : i_lips like lips occurs 0 with header line,
i_vbap like vbap occurs 0 with header line.
Variables
data : v_deliv like vbfa-vbelv,
v_invoic like vbfa-vbelv.
Data Declaration Part for Post Goods Issue
DATA: l_vbeln LIKE likp-vbeln,
l_vbkok LIKE vbkok,
i_prot LIKE prott OCCURS 0 WITH HEADER LINE,
ef_error_any_0 TYPE c,
ef_error_in_item_deletion_0 TYPE c,
ef_error_in_pod_update_0 TYPE c,
ef_error_in_interface_0 TYPE c,
ef_error_in_goods_issue_0 TYPE c,
ef_error_in_final_check_0 TYPE c,
d_return LIKE bapireturn1.
Internal tables for BAPI Function Module
data : i_cret like BAPIRETURN1 occurs 0 with header line,
i_csucess like BAPIVBRKSUCcESS occurs 0 with header line,
i_ret2 like bapiret2 ,
flag type c,
i_mesg like mesg occurs 0 with header line.
Data Declaration for Invoice Creation
DATA: VBSK_I LIKE VBSK.
data: d_success type c.
DATA: XKOMFK LIKE KOMFK OCCURS 0 WITH HEADER LINE,
XKOMV LIKE KOMV OCCURS 0 WITH HEADER LINE,
XTHEAD LIKE THEADVB OCCURS 0 WITH HEADER LINE,
XVBFS LIKE VBFS OCCURS 0 WITH HEADER LINE,
XVBPA LIKE VBPAVB OCCURS 0 WITH HEADER LINE,
XVBRK LIKE VBRKVB OCCURS 0 WITH HEADER LINE,
XVBRP LIKE VBRPVB OCCURS 0 WITH HEADER LINE,
XVBSS LIKE VBSS OCCURS 0 WITH HEADER LINE,
XKOMFKGN LIKE KOMFKGN OCCURS 0 WITH HEADER LINE.
S E L E C T I O N - S C R E E N ******************
Selection-screen
Selection-screen : begin of block blk with frame title text-001.
parameters : p_vbeln like vbak-vbeln obligatory.
selection-screen : end of block blk.
A T - S E L E C T I O N - S C R E E N ***************
Validation on Sales order
at selection-screen on p_vbeln.
Check the data on VBAK Table
select single vbeln from vbak into vbak-vbeln
where vbeln = p_vbeln.
if sy-subrc ne 0.
message e006 with p_vbeln.
endif.
S T A R T - O F - S E L E C T I O N *******************
Start-of-selection.
break sreddy.
Get the Invoice Number corresponding Sales Order Number
perform get_invoice.
Step 1.
Cancel the Invoice - Transaction VF11
perform cancel_invoice.
Reverse the goods issue
perform reverse_goodsissue.
Get the Order and Delivery Items
perform get_sales_deliv.
Delivery Change
perform Delivery_change.
Create Invoice document
perform invoice_create.
E N D - O F - S E L E C T I O N *******************
end-of-selection.
if flag = 'X'.
message i012 with p_vbeln.
endif.
*& Form get_invoice
Get Invoice Number
FORM get_invoice.
Clear Variables
clear : v_deliv,
v_invoic,
flag.
Get the Delivery Number First
select single vbeln from vbfa into v_deliv
where vbelv = p_vbeln
and vbtyp_n = 'J'.
if sy-subrc ne 0.
message i004 with p_vbeln.
stop.
endif.
Get the Invoice Number
select single vbeln from vbfa into v_invoic
where vbelv = p_vbeln
and vbtyp_n = 'M'.
if sy-subrc ne 0.
message i003 with p_vbeln.
stop.
endif.
ENDFORM. " get_invoice
*& Form cancel_invoice
Cancel the Invoice
FORM cancel_invoice.
clear : i_ret2,
i_cret,
i_csucess.
refresh : i_cret,
i_csucess.
CALL FUNCTION 'BAPI_BILLINGDOC_CANCEL1'
EXPORTING
BILLINGDOCUMENT = v_invoic
TESTRUN =
NO_COMMIT =
BILLINGDATE =
TABLES
RETURN = i_cret
SUCCESS = i_csucess
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = space
IMPORTING
RETURN = i_ret2.
read table i_cret with key type = 'E'.
if sy-subrc ne 0.
message i005 with v_invoic.
stop.
endif.
ENDFORM. " cancel_invoice
*& Form reverse_goodsissue
Reverse the goods Issue
FORM reverse_goodsissue.
Local Variable
data : lv_vbtyp like likp-vbtyp.
clear : i_mesg,
lv_vbtyp.
refresh : i_mesg.
select single vbtyp from likp into lv_vbtyp
where vbeln = v_deliv.
CALL FUNCTION 'WS_REVERSE_GOODS_ISSUE'
EXPORTING
I_VBELN = v_deliv
I_BUDAT = sy-datum
I_COUNT =
I_MBLNR =
I_TCODE =
I_VBTYP = lv_vbtyp
TABLES
T_MESG = i_mesg
EXCEPTIONS
ERROR_REVERSE_GOODS_ISSUE = 1
OTHERS = 2
if sy-subrc ne 0.
message i007 with v_deliv.
endif.
ENDFORM. " reverse_goodsissue
*& Form get_sales_deliv
Get the Sales order and Deliv Items
FORM get_sales_deliv.
Local Variables
data : lv_kwmeng like vbap-kwmeng.
clear : i_lips,
i_vbap.
refresh : i_lips,
i_vbap.
Select the data from LIPS
select * from lips into table i_lips
where vbeln = v_deliv.
if sy-subrc ne 0.
message i008 with v_deliv.
stop.
endif.
sort i_lips by vbeln posnr.
Get the Sales order Item Data.
select * from vbap into table i_vbap
where vbeln = p_vbeln.
if sy-subrc ne 0.
message i006 with p_vbeln.
stop.
endif.
sort i_vbap by vbeln posnr.
Compare delivery Item and Order Items
loop at i_lips.
clear lv_kwmeng.
read table i_vbap with key posnr = i_lips-posnr.
if sy-subrc eq 0.
lv_kwmeng = i_vbap-kwmeng * 2.
if lv_kwmeng >= i_lips-lfimg.
i_lips-lfimg = i_vbap-kwmeng.
modify i_lips.
endif.
endif.
endloop.
ENDFORM. " get_sales_deliv
*& Form Delivery_change
Delivery Update
FORM Delivery_change.
Clear : i_prot.
refresh : i_prot.
Delivery Update
CALL FUNCTION 'LE_MOB_DELIVERY_UPDATE'
EXPORTING
do_commit = 'X'
TABLES
t_delivery_items = i_lips
prot = i_prot
EXCEPTIONS
conversion_overflow = 1
essential_data_missing = 2
error = 3
nothing_to_update = 4
lock_after_update_failed = 5
error_in_delivery_update = 6
OTHERS = 7.
COMMIT WORK.
IF sy-subrc <> 0.
MESSAGE i009 with v_deliv.
endif.
Post Goods Issue
CLEAR: d_return,
i_prot,
l_vbeln,
l_vbkok.
REFRESH i_prot.
CLEAR: ef_error_in_item_deletion_0 ,
ef_error_in_pod_update_0 ,
ef_error_in_interface_0 ,
ef_error_in_goods_issue_0 ,
ef_error_in_final_check_0 .
carry out goods issue
l_vbeln = v_deliv.
l_vbkok-vbeln_vl = l_vbeln.
l_vbkok-wabuc = 'X'.
carry out goods issue
l_vbeln = v_deliv.
l_vbkok-vbeln_vl = l_vbeln.
l_vbkok-wabuc = 'X'.
SET UPDATE TASK LOCAL.
CALL FUNCTION 'WS_DELIVERY_UPDATE'
EXPORTING
vbkok_wa = l_vbkok
synchron = 'X'
no_messages_update = ' '
update_picking = 'X'
commit = 'X'
delivery = l_vbeln
nicht_sperren = 'X'
if_error_messages_send_0 = space
IMPORTING
ef_error_any_0 = ef_error_any_0
ef_error_in_item_deletion_0 = ef_error_in_item_deletion_0
ef_error_in_pod_update_0 = ef_error_in_pod_update_0
ef_error_in_interface_0 = ef_error_in_interface_0
ef_error_in_goods_issue_0 = ef_error_in_goods_issue_0
ef_error_in_final_check_0 = ef_error_in_final_check_0
TABLES
prot = i_prot
EXCEPTIONS
error_message = 1
OTHERS = 2.
if sy-subrc ne 0.
message i010 with v_deliv.
else.
COMMIT WORK .
endif.
ENDFORM. " Delivery_change
*& Form invoice_create
Invoice Creation
FORM invoice_create.
refresh: XKOMFK, XKOMV,
XTHEAD, XVBFS,
XVBPA, XVBRK,
XVBRP, XVBSS.
clear : XKOMFK, XKOMV,
XTHEAD, XVBFS,
XVBPA, XVBRK,
XVBRP, XVBSS,
VBSK_I.
VBSK_I-SMART = 'F'.
XKOMFK-VBELN = v_deliv.
XKOMFK-VBTYP = 'J'.
APPEND XKOMFK.
CALL FUNCTION 'RV_INVOICE_CREATE'
EXPORTING
VBSK_I = VBSK_I
WITH_POSTING = 'C'
TABLES
XKOMFK = XKOMFK
XKOMV = XKOMV
XTHEAD = XTHEAD
XVBFS = XVBFS
XVBPA = XVBPA
XVBRK = XVBRK
XVBRP = XVBRP
XVBSS = XVBSS.
if sy-subrc eq 0.
COMMIT WORK.
flag = 'X'.
else.
message i011 with p_vbeln.
endif.
ENDFORM. " invoice_create
Reward Points if it is helpful
Thanks
Seshu -
I need to configure a new hard disk as backup disk for time machine.
The set up program is running since two hours and it says it will take 9 days to backup about 56 GB.
Is it normal ?Roberto 17 wrote:
I started this morning at 12 and after 5 hours now the backup is about 6 GB up on 56 GB.
The new HD is a WD My Passport Edge 500 GB capacity
5 hours to do 6 GB of transfer is NOT normal, even for USB 2.0 so there's something wrong here. I'd say cancel it, wipe the drive and then test the integrity of the drive. Do some file transfers over to and see if it's behaving normally. It could be a bad USB cable, it could be a bad drive or bad enclosure. As it's new, I suspect you haven't really put it through its paces yet and it's important to do that first before commissioning it to serve as your "reliable backup." -
You may need to configure the connection settings in the deployment descrip
Hi All
I am new to BPEL and going through Order Booking Tutorial (using 10.1.3.4 version of opmn ) .
I have a problem in 'Designing the Database Adapter to Insert Data' Chapter.
I have installed Oracle 10g Express Edition and BPEL Process Manager on my local system.
In the Example it has been asked to create a daabase connection with Third Party JDBC Driver. Instead I have created a database connection with Oracle(JDBC) Driver.So i didnt have to register any third party driver.
I cud access the Order/OrderItems table as well .
I Deployed the same on the server.But while running the process I get following error--
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
nested exception is:
ORABPEL-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore. [Caused by: Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler found
The Connection descriptor used by the client was:
localhost:1521:XE
See root exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml) and restart the server. Caused by Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.4.0) (Build 080602)): oracle.toplink.exceptions.DatabaseException
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I have checked several post on this error but every post talks about third party database.I have used Oracle Database only so why/What shud I change anything in oc4j-ra.xml?? This is my doubt .
Pls help me on this .Also Let me knowe in my case is there any need to create the datasource.?I am low at concept of database.
Pls help
Regards
NaveenHi
I am trying to insert orader and order Items as given in the Order booking tutorial..
Here are the files description
.wsdl file looks like
<service name="DBInsert">
<port name="DBInsert_pt" binding="tns:DBInsert_binding">
<jca:address location="eis/DB/MyConnection"
UIConnectionName="MyConnection"
ManagedConnectionFactory="oracle.tip.adapter.db.DBManagedConnectionFactory"
mcf.DriverClassName="oracle.jdbc.OracleDriver"
mcf.PlatformClassName="oracle.toplink.platform.database.oracle.OraclePlatform"
mcf.ConnectionString="jdbc:oracle:thin:@localhost:1521:XE"
mcf.UserName="system"
mcf.Password="6672B62098892995C8B651EFDF798A59"
/>
</port>
</service>
data source file looks like
<connection-pool name="MyConnection">
<!-- (DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=on)(ADDRESS=(PROTOCOL=tcp)(HOST=nakhanna)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=XE))) below is in the form: [hostname]:[port]:[oracle sid]" -->
<connection-factory factory-class="oracle.jdbc.OracleDriver" user="orabpel" password="->pwForOrabpel" url="jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=on)(ADDRESS=(PROTOCOL=tcp)(HOST=nakhanna)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=XE)))"/>
</connection-pool>
<managed-data-source name="MyConnection" connection-pool-name="MyConnection" jndi-name="jdbc/MyConnectionDS"/>
</data-sources>
oc4j-ra.xml looks like
<connector-factory location="eis/DB/MyConnection" connector-name="Database Adapter">
<config-property name="xADataSourceName" value="jdbc/MyConnectionDS"/>
<config-property name="dataSourceName" value=""/>
<config-property name="platformClassName" value="oracle.toplink.platform.database.Oracle9Platform"/>
<config-property name="usesNativeSequencing" value="true"/>
<config-property name="sequencePreallocationSize" value="50"/>
<config-property name="defaultNChar" value="false"/>
<config-property name="usesBatchWriting" value="true"/>
<connection-pooling use="none">
</connection-pooling>
<security-config use="none">
</security-config>
</connector-factory>
##################################################################3
Still I get the same error .
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>null</code>
</part><part name="summary"><summary>file:/C:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_FulfillOrder_4.0_e77c64251e45eb4711a3a093f92e6a86.tmp/DBInsert.wsdl [ DBInsert_ptt::merge(OrdersCollection) ] - WSIF JCA Execute of operation 'merge' failed due to: java.util.MissingResourceException
java.util.MissingResourceException
; nested exception is:
ORABPEL-00001
java.util.MissingResourceException
java.util.MissingResourceException
java.util.MissingResourceException
</summary>
</part><part name="detail"><detail>null</detail>
</part></bindingFault>
Pls let me know if something looks wrong in the above files
Thanks
naveen -
Need to configure output type for adobe form
Hello All,
I need to configure output type for Adobe Form thru NACE. What would be print program and how do I call my form from that program? and, what would be the FORM routine for that form in NACE?
I'm little confused, Pls I need your help.
Thanks in advance,
ChandraHi,
Just before few weeks we did this task.
Say for example if you want to print PO details through ADOBE form instead of normal sapscript layout or standard MEDRUCK, you can follow the following steps.
1. Design the form in SFP tcode, by passing the necessary inputs through form interface.
2. Then use tcode tcode NACE and select EF as application and click output types button on the application tool bar. Select NEU output type and double click processing routines on left side.
3. Then, in the right side of the screen we can see the calling program and the form (may be sapscript or smartform) whatever used.
4. For form names we have two options in NACE tcode.
One is Form and the otherone is PDF/Smartform Form. If you are using adobe form give your form name under PDF/Smartform and also select PDF under the type option in the same screen.
This worked perfectly for us. But pass the required parameters to the form from the routine used in standard program.
If any queries please post it.
Maybe you are looking for
-
XI scenario for Local PO - Email to be sent to SC requester
Hi all, We are running on SRM 5.0 (Standalone scenario).We are sending the local PO to the vendor system thorugh XI(SRM>XI>Vendor system). My reqt is when the PO is sent to the vendor system,a response/message is sent to XI that the PO has been del
-
Premiere Pro CC asleep? Won't respond to anything when I go back to it.
So, I've been having this issue for a week or two now, and I can't seem to figure out why it is happening. I usually have Premiere Pro CC (most recent version installed running in OSX Yosemite) open in the background of my computer when I'm not editi
-
We've triple-checked the SSL certificates, reconfigured security options, and are fine with our McAfee secure verification, and nothing seems to help. We've gotten calls & emails from numerous customers using Firefox; I believer the majority are usin
-
How to Use Oracle Coherence in BPEL 11g
i have a scenario to cache the results some where, so that i can make use of the same for the same request. I hope this can be done using Oracle Coherence. Could you please let me know how can i use this coherence for cacheing in BPEL 11g (in my bpel
-
I used to have my music on a shared computer. That computer has since moved on with the music. My library link is looking still to that location for the music. It can't find it so naturally I can't play it. I put all my new music in the user/musi