Need Sample Unit Test Plan templates for SD
Hi Experts,
I am in need of some SD unit test plan templates used in any of your implementations.
Pls Help.
Dear Preethi
As already expressed, you are asking the confidential document which nobody would like to share.
However, AS-IS will be prepared by Core team people and your duty is to go through the process in depth.
May be the AS-IS from SD purview, I can list as an example as how it should be
The excel sheet of AS-IS header tabs will have to contain the following header tabs
- Scenario like Exports, Domestic etc,
- Under this scenario, Groups like OE, Aftermarket, Stock Transfer etc.,
- Under this Groups, Process like Business Plan, Scheduling, Preshipment activities, Post shipment activities etc.,
- Finally this process has to be break down into a detailed list of activities.
So you have to go through these process in detail.
As for as testing is concerned, there is no need to check the customer master.
All you have to do is to carry out all standard T.Codes like order creation, create delivery, PGI, Billing and Excise Invoice. Again try to cancel all documents from billing to sale order and ensure that you are able to cancel those documents. Check for the FI implication on the COGS and material cost.
Also while testing, you can also check whether you are able to create one delivery against multiple sale orders and one invoice against multiple deliveries. If not successful, analyse the reason for split, maintain the required datas in masters and retry the process.
thanks
G. Lakshmipathi
Similar Messages
-
Required Unit test Plan for Data migration
Dear All,
I am looking for unit test plan Draft documents/templates which covers
1. Testing tools
2. Methods
3. Error handling
4. Reviews and approvals
The project is a Oracle 10g data migration from one schema to another schema.
It will be a greate help if anyone can forward the same to me.
Thank you.Hi Vaishali,
You may wish to refer the links below...
https://service.sap.com/instguides --> SAP NetWeaver --> Release 2004s --> Upgrade
https://www.sdn.sap.com/irj/sdn/developerareas/bi
latest on upgrade tp BI7.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
Upgrading BW 3.X to SAP NetWeaver 2004s BI (PDF 2.6 MB)
Front End Migration strategy
Here's the migration strategy: Rolling out the New SAP NetWeaver 2004s BI Frontend Tools
Presentation
http://csc-studentweb.lrc.edu/swp/Berg/Articles/PM_2006_upgrade_NW2004s_Bjarne_Berg_v12.ppt
Here are the frontend requirements:
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation
Here are the backend requirements in the product availabilty matrix:
https://websmp110.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=DISP_NEW&00200682500000002804=01200615320900001250
Migration of Web Teplates
832713 - Migration of Web templates from BW 3.x to Netweaver
Assign points if this helps.
Regards,
Anil -
Unit test plan for inbound and outbound interfaces
I am trying to create a UNIT TEST PLAN for an interface. In this interface a flat file in IDOC format is picked up from the application server and processed using EDI_DATA_INCOMING for the relevant posting ( example : Sales order creation from a PO IDOC). IF the file is not in IDOC format then it is reformatted to the IDOC format manually.
In second scenario(outbound), after sales order creation or billing document creation, IDOC is created which is read and a custom flat file is created and sent to a middleware.
PLease suggest a unit test plan for these kind of scenarios or send a sample UTP if possible.
REgards
Nishant
PS: points will be awarded to helpful answers.Unfortunately this isn't possible, the esa has only one routing table. You'll have to add specific routes for your internal networks.
I usually avoid two-armed setups because of this and it gets even worse if you want to use virtual gateways (traffic gets sent via the internal interface with an IP from the external interface) -
Sample Unit Tests on Role Redesign
Hi All,
I'm working in a Project in which we undertaken the resposibility of creating new set of roles and the new roles are built.
Now, the client is asking for unit tests.
Can someone please provide me with some "sample unit tests" for this Role Redesign.
Regards,
PreethiHi,
Speak to the test team on your project, they will have templates, methods etc.
Basic steps are
1. Login with appropriate user & role
2. Run transaction to completion. If errors then capture input data & actions & corresponding error messages (texts, SU53's etc).
3. Fix & retest if required, include SU24 changes etc
Your security team will be able to help with any of the above that is new to you. -
Hi all,
I am new to ABAP environment.Can anyone explain what is meant by unit test plan document and also what is the diff between between code review and peer review.
Thanks in advance
*There is enough material online, pl help yourself.
@Others: Answering such questions is discouraged.*
Edited by: Suresh Datti on Sep 1, 2009 10:35 AMHi,
Unit test plan:
From a technical point of view , once you complete your development you need to test the objet to ensure it is meeting all the requirements..
For this purpose you prepare a unit test plan. You will have both negative and positive test case in your plan. Execute each case and check whether the output is acheived or not..
Code review.. Once coding is completed you need to review your code to ensure that you have followed all coding stds..
Peer review is code review done by; some one else in your team.
Search SCN for more details
Regards
Ansari -
Hi
I'm new to ABAP development. I have completed few objects in ABAP environment. I would like to have a test plan template to maintain documentation.
Could anyone provide the same?
Thanks
sapienHai
Check the following
Test Plan
Prepared By Preparation Date
Project Initial Testing Date
Object: Last Changed Date
Object Type Report
Predecessors None
Successors None
Sno Particulars Y/N
1 Is the functionality of the object in accordance with Technical specification provided? Y
2 If there are changes in functionality suggested by onsite thru mail / phone till the completion of coding for the object. (Deferring the Tech spec) mention the changes clearly as below. N
S. No Date Mail/Phone Change description
3 Please mention the final functionality of the object to be tested after final changes.
Test Cases
Test Case No. Test Case Description Expected Results If Not Applicable Specify Date
1. Check for the data population in the internal tables As per the spec Applicable
2. Check for the input validations As per the spec Applicable
3. Check whether the required fields are selected from the tables As per the spec Applicable
4. Check whether the output format is according to the required format As per the spec Applicable
Y2K Test Check for date handling for compliance with year 2000. Ensure that test cases are prepared to handle date validation and manipulation of dates.
Check whether 4 digits variable is used for YEAR in case YEAR is taken as separate variable. Emphasize on declaring date variable referring to SY-DATUM
Time spent for preparing Test Plan (Hrs.) 1 hr
Total Number of Test Cases Applicable 4
Regards
Sreeni -
How to prepare the UNIT test plan
Hi ALL
can any body tell me how to prepare a unit test planUse the following colums in preparing unit Test data.
1. Sr.No.
2.Test Condition.
3.Expected Results
4.Description/Instruction for the test execution.
5.TestData used for the test.
6.Actual Result.
7.Pass/Fail.
For a login Screen. Unit Test plan wud b.
1. 1
2. User Presses Login Button.
3. Data shud be validated.
4. As soon as the user enter the fields in the login screen,the data shud be validated and If entered data is correct proceed to the next screen, else popup an error.
5. User:kiran, Pwd:***
6. Entered incorrect data,but proceeded to the new screen.
7. FAIL. -
How to write utp(unit test plan)
how to write utp(unit test plan)
Hi,
Steps to be followed for UTP.
UTP : Unit Test Plan. Testing the program by the developer who developed the program is termed as Unit Test Plan.
Two aspects are to be considered in UTP.
1. Black Box Testing
2. White Box Testing.
1. Black Box Testing : The program is executed to view the output.
2. White Box Testing : The code is checked for performance tuning and syntax errors.
Follow below mentioned steps.
<b>Black Box Testing</b>
1. Cover all the test scenarios in the test plan. Test plan is usually prepared at the time of Techincal Spec preparation, by the testing team. Make sure that all the scenarios mentioned in the test plan are coverd in UTP.
2. Execute your code for positive and negative test. Postive tests - to execute the code and check if the program works as per expected. Negative Test - Execute code to know if the code is working in scenarios in which it is not supposed to work. The code should work only in the mentioned scenarios and not in all cases.
<b>White Box Testing.</b>
1. Check the Select statments in your code. Check if any redundant fields are being fetched by the select statements.
2. Check If there is any redundant code in the program.
3. Check whether the code adheres to the Coding standards of your client or your company.
4. Check if all the variables are cleared appropriately.
5. Optimize the code by following the performance tuning procedures.
<b>Using tools provided by SAP</b>
1. Check your program using <b>EXTENDED PROGRAM CHECK</b>.
2. Use SQL Trace to estimate the performace and the response of the each statement in the code. If changes are required, mention the same in UTP.
3. Use Runtime Analyser and Code Inspector to test your code.
4. Paste the screen shots of all the tests in the UTP document. This gives a clear picture of the tests conducted on the program.
All the above steps are to be mentioned in UTP.
Regards,
Vara -
hi
can u plz explain abt unit test planning?
eshi bramara,
Unit testing is used to test the proper working of a single module.
Integration testing is used to test the integration between the modules,
when the complete business scenario of a client is tested (say from sales order creation to receipt of money from customer).
Unit Testing
When you test every single document is called unit testing.
String Testing
One transaction full activity is called string testing. For example Vendor
invoice, goods received and vendor payment.
Integration Testing
It is purely with other modules and we have to check whether the FI testing
is working with other related modules or not.
Testing of combined parts of an application to determine if they function
together correctly.There are three types of integration testing.1. Big bang
testing: Testing with all modules combined together invariable of its
levels. Often done for small projects.2. Bottom up test:Testing by
integrating lower level modules and ascending towards the higher-level
modules.3. Top down: Testing the higher-level modules and descending towards
the lower level modules.This can be accomplished with dummy modules to
replace the under construction modules with so-called stubs and drivers.
not.
Regression Testing
Testing for whole database. Bring all the data into another server and do
the testing is called regression.
Thanks,
<REMOVED BY MODERATOR>
kushagra
Edited by: Alvaro Tejada Galindo on Jan 31, 2008 9:45 AM -
Need to create stupid proof templates for non-designers
Ok folks, I'm new to this forum having come across it in search of a solution to my problem.
I need to create illustrator template files (.ai not .ait) that customers can download and use to create their own artwork for print. I have to create them in every printable paper format from business cards to A3 posters, folding, non-folding yada yada.
Now, previously, we used an .ai file with a guide layer we created. This guide layer had all relevant info, was named accordingly. It was set not to print and locked. As I tend to use print to file, distiller and all, this has always been perfectly adequate to create my pdfs. Of course, this doesn't work the same way when saving a pdf, which is what most people do. However, customers who wish to download the templates are having some difficulty with the concept of 'make sure you delete the guide layer before saving your pdf'.
For the most part, the customers using these files are not illustrator literate. Even though there are clear instructions to 'delete' the guide layer when saving the needed pdfs, they are failing to do so. This means when the .ai (with the non printable layer) is saved to pdf, the guide layer as a hidden object is saved within the pdf. Upon printing at our printing facilities, the guide layer has been printed with disasterous results.
A possible solution we came up with was to use the ruler guides to create the guide layer. For this solution to work though, I need to be able to use different colours for different guides within the same document. Which we can't. We can only change all the guide colours and they are all the same colour.
Another idea would be to outline text indicating various printable and non-printable areas and making them into guides via View>guides>make guides, which works to an extent but looks messy, especially when viewing the full page and again, isn't particularly distinctive, leading back to having different guides in different colours.
I've come across another possible solution involving template layers. Viewing the resulting pdf seems fine and in all purposes it does what we need, except for when reopening the saved (not printed) pdf back in illustrator, the template layer is still there and I need it gone. The same way it would be if the .ai were printed to postscript and sent through distiller.
My ideal solution would be to have to ability to have the different coloured ruler guides in place throughout my document, but as I previously stated, all guides have to be the same colour and that's useless in this instance.
So, has anyone got any bright ideas. Coincidentally I need to create the same templates for both psd and indesign but I'll cross that bridge when I've figured this out.Hey Mike, thanks for the response.
1. Not a chance, if, even when the process is described in great detail in an info pdf, available as info on the website (with screenshot instructions) and mentioned in the .ai file itself, they aren't even deleting the guide layer, then turning off 'Preserve illustrator editing capabilities' is kind of a stretch. Like I said, the folks these templates are to be designed for are not illustrator literate for the most part.
2. Not sure if this would work. I'd have to look into it.
3. Beyond my capabilities. I'll let you know if number 2 works.
One possible solution I've come up with uses the idea of a template layer always on top, with 'DELETE THIS LAYER' and screenshot of layers pallette and clear little red arrows etc. If I can the template layer to always remain on top, with their artwork layer underneath, they would have to toggle hide/unhide to view their artwork, and the reminder to remove the guide layer would be pretty much in their face. That's not a guarantee either though.
Personally, I think what I've been asked to achieve is a pretty hard task and honestly, I'm thinking there are no failsafe options. -
Business plan template for iPages
Where can I find business plan template for iPages?
Although I can't recommend it first hand, this pack may have what you are looking for: https://itunes.apple.com/us/app/business-templates-for-pages/id717953908?mt=8
-
What is UTP?(unit test plan)
hi,
what is UTP?
How do you write UTP?(unit test plan)Hi,
Are u referring to the UTP which is to be done after u hve completed the coding. If so, UTP is a document where in u write the test cases and the test results of the object that you have developed. It will have the test case, expected result and the result that is displyed in the output. You can also provide the screenshots of the output and also comments in the document.
Hope this helps.
Reward points if helpful.
Thanks. -
Sample Test Case templates for Reports
Hi all,
May I know , how the unit test cases would be for reports. Need Some Sample Templates ..Kindly Advice where Can I find..
Edited by: 796797 on Mar 17, 2011 10:43 AMHere are some checklist
Field Names
Font Size acorss the report should be consistent
columns should wrap up in a readable format
decimal places for % fields.
Decimal places for quantity fields.
Reports should have grid lines, this will be helpful from a readability standpoint
Right align the measures along with the associated headers
The sub-total text
No column headers should be underlined
Backend filters at the top on the right
Header/Footer
Download to PDF and Excel and Print HTML
"Check 1. Prompts sequence
2. datatype of prompts - drop down or multiselect
3. default values and
4. report results returned after selecting any prompt"
"Run the report with some filter values and see if filters are working.
Access the Report and try to Modify the report request by selecting the modify link, include new fields and remove some default fields
Save the report
Validate the calculations on calculated fields. -
Hi
Could some one help me in writing a Test plan on infotypes. or send me a template to [email protected]
Many Thanks
ChinniHai
Check the following
Test Plan
Prepared By Preparation Date
Project Initial Testing Date
Object: Last Changed Date
Object Type Report
Predecessors None
Successors None
Sno Particulars Y/N
1 Is the functionality of the object in accordance with Technical specification provided? Y
2 If there are changes in functionality suggested by onsite thru mail / phone till the completion of coding for the object. (Deferring the Tech spec) mention the changes clearly as below. N
S. No Date Mail/Phone Change description
3 Please mention the final functionality of the object to be tested after final changes.
Test Cases
Test Case No. Test Case Description Expected Results If Not Applicable Specify Date
1. Check for the data population in the internal tables As per the spec Applicable
2. Check for the input validations As per the spec Applicable
3. Check whether the required fields are selected from the tables As per the spec Applicable
4. Check whether the output format is according to the required format As per the spec Applicable
Y2K Test Check for date handling for compliance with year 2000. Ensure that test cases are prepared to handle date validation and manipulation of dates.
Check whether 4 digits variable is used for YEAR in case YEAR is taken as separate variable. Emphasize on declaring date variable referring to SY-DATUM
Time spent for preparing Test Plan (Hrs.) 1 hr
Total Number of Test Cases Applicable 4
Regards
Sreeni -
Help needed on balance sheet plan report for the current year
Hi BW gurus,
I have a problem with reporting.
I need to get Balance-Sheet Plan Reports for the Planned year and for the current year.
To get the report for the planned year its straight forward just by restricting 0balance by the version to 1 and the valuetype 20.
But I have a problem with the current year report.
I have fiscal year and the company code as the variables.
The report should be like this.
If we need the report as of today(July 26 2006),we may input 2006 for the fiscal year variable.
And the 0balance for the twelve fiscal periods should be as follows
From jan 2006 to june 2006(fiscal periods) it should have only the actuals
From july 2006 to dec 2006(fiscal periods) it should have only the plan
I have already built a query by having two restricted keyfigures on 0balance.
One by restricting version and valuetype 0 and 10 , and the other with 1 and 20.
But in the report I am getting two columns of data for each fiscal period for 12 periods.0balance with actuals and 0balance with plan.
But I need to get 0balance with actuals from jan to june(individually for each fiscal period columnwise),and 0balance with plan from july to dec(individually for each fiscal period columnwise).
Hope you people can visualize my report.
Please help me ASAP.
Any kind of help is appreciated.
My mail id is [email protected]
Thanks in advance
Regards
Sam MathewHi Sam,
Did u get this issue solved. I am having the same issue now. Can u please let me know if u have a solution for this.
Thanks
Prasad
Maybe you are looking for
-
How do you include other files with Muse publish to business catalyst test site
Hi there I am trying to publish a site created in muse to the business catalyst test website service for a client to review in the website i created an animation that i have inserted as an HTML snippet (ie copied relevant code into "INSERT HTML" The
-
Any functional spec? in fi ,ap ar and gl
send me by mail [email protected]
-
Collaboration rooms and Inner Page == embedded
Hi, does Inner Page Isolation Mode has always have to be set at URL? When we set Inner Page Isolation Mode to Embedded the collaboration rooms and collaboration detailed navigation are not working anymore and the browser is redirected to: http://some
-
Error in code, need help
import javax.swing.*; import java.awt.*; import java.awt.event.*; public class CropProfit2 extends JApplet implements ActionListener private JTextField n1Text = new JTextField(); private JTextField n2Text = new JTextField(); private JTextField n3Text
-
Any updates on 1.6.1?
Anyone have any updates on the rollout of 1.6.1? Didn't know if anyone had updates on the progress of the tweaking since the rollout in WA with the audio isssues? In VHO 08 (NJ) and was scheduled initially for Jan 27th. THX