Need SAP notes for - Goods mvt field blank
Hi All,
While doing the cancellation using MIGO screen the field reason for movement (GRUND ) is not automatically copied. Any Notes available ?
Edited by: soyunee on Oct 13, 2009 9:48 AM
Hi,
Please check whether for the reversal movement type,Reason for Movements has been defined or not in OMJJ Tode
TCode OMJJ
Click Movement type
Enter mvt tyoe(say 102)
Click Reason for Movement and maintain if not maintained
Regards
Similar Messages
-
KE5Z : UserExit or SAP Note for adding new fields in the report output
Hi,
I want to add 2 new fields in KE5Z (Profit Center: Actual Line Items) report output.
Order reason(AUGRU), Sales Document Type (AUART) fields.
Is there any UserExit or SAP Note available for this....
Thanks in advance,
fractalHi Fractal,
See if Note 92864 will help you.
Summary
Symptom
Through a modification, it is possible for you to include additional fields in the profit center line-item reports 'actual' and 'plan' (Release 3.1*).
Additional key words
KE5Z, KE5Y, RCOPCA02, RCOPCA08 -
SUPPORTGUIDE 20010613143936 -
REPORTWRITER,
SGRW_OM SGRW_PS SGRW_PC SGRW_SL SGRW_PCA SGRW_EC SGRW_LIS
Cause and prerequisites
The fields must be located in table GLPCA (for actual) or GLPCP (for plan).
For Release 3.0F, you should ensure you have applied Note 62511 first.
Solution
To include a field in the actual line item report, proceed as follows:
Call the ABAP/4 Dictionary (Transaction SE11) and display table GLPCA. You can then find in a line the field name and data element for the field you want to include.
Return to the initial screen of the ABAP/4 Dictionary. Now change the structure RPCA2. If the structure does not yet contain the field, you select Edit -> Insert field; enter the field name and data element. Do not insert the new field at the beginning of the structure but in the rear half of the structure.
Then save and activate the structure.
Now call the ABAP Editor (Transaction SE38). Change the source code of program RCOPCA02. Insert the lines set out in the attachment in FORM routine FIELDCAT_FILL. When you do this, replace SGTXT by the field name of the field. If you normally want the field to be displayed when you the access the report, delete the line afield-no_out = 'X'. "<<<< insert Note 92864 .
You should note that the place where you insert the lines influences the position of the column in the report list.
To include a field in the Plan-line-item report, carry out the same procedure except with table GLPCP, structure RPCA8 and program RCOPCA08.
Note: Pls check if these 2 fields are available in any of the layout versions you have available with the transaction.
Cheers,
Vikram
Pls reward for helpful replies!! -
What is the new sap note for Ptax slabs of FY 2011-12.
Dear Experts,
we are currently using ECC 6.0, release 604, patch level 0035 and support package SAPKE60435. professional tax slabs not updated in table V_T7INP4.
what is the new sap note for Ptax slabs of FY 2011-12.Hi,
The Profession Tax tables T7INP3 & T7INP4 are customizing tables in which the entries are to be modified. SAP provides the initial entries and, if there is any change in slab rates, then you would need to update these slabs manually.
Please delimit the slab code in table T7INP3 and then create a new slab code entry from the date of delimition for the new rates in table T7INP4.
Regards,
Nishtha -
SAP NOTE for COMPUTE_BCD_OVERFLOW in include LM60EF0C
Hello friends,
I am getting dump COMPUTE_BCD_OVERFLOW in include LM60EF0C of standard program SAPLM60E.
Error position --> ADD L_PBET-PLNMG TO LV_GESAMT_PLNMG.
The above code is added in sap program in note 671875.
I am not getting any correction note for 671875 note to avoid dump.
Please let me know if you knows any correction note for 671875 note.
Thanks in advance.
Edited by: lovely_yp on Dec 22, 2011 9:20 AMHi,
@Srikishan : Correction note 561614 you suggested is for include LM60EFXS,
But i want correction note for include LM60EF0C.
SAP system component version --> SAP ECC 6.0
@Siva Kumar: Correction note 671875 is already implemented in program,
Now I am facing the problem in the code of note 671875.
Hence i need correction note for the already implemented note 671875.
Thank you.
Edited by: lovely_yp on Dec 23, 2011 7:45 AM
Edited by: lovely_yp on Dec 23, 2011 7:49 AM -
SAP note for implementing FM CONVERSION_EXIT_MATN2_OUTPUT
Hello Experts,
I need to implement the FM CONVERSION_EXIT_MATN2_OUTPUT ( + Conversion routine MATN2 ) in our SAP system version 4.7. Can anyone tell me if there are any specific SAP note for implementing it.
Note: Our SAP system dont have DI software component. I want to implement the FM without going for DI.
Awaiting reply,
Thanks,
Balaji
Edited by: Balaji on Jan 19, 2009 11:59 AM
Edited by: Balaji on Jan 19, 2009 1:02 PMThanks.
-
Hi,
Good day guys
Ive the user exit for iw32 for creating the settelment rules. iam getting all values except cost center. Right now we are using Ecc 6.0.
Plz let me know if any sap note for iw32 to get the cost center value.
RegardsHi,
I tried to find some oss message but there is only one SAP note 1250669 related to your problem. Please check this one.
But looks that i has been published on 09.2008. So it might be in your system already.
Regards,
Lokesh. -
Dear All,
I have some issue related the revaluation. Do you ever know which SAP Notes for revaluation (FAGL_FC_VAL) which is explained that this revaluation cannot be assigned with each original cost object? Do you ever know which SAP Notes for revaluation Joint Venture (GJ91) which is explaned that this program only display the standard and we cannot add some new field in this screen? Please share if you know this notes.
Thanks,
Jones1. I have some issue related the revaluation. Do you ever know which SAP Notes for revaluation (FAGL_FC_VAL) which is explained that this revaluation cannot be assigned with each original cost object?
https://service.sap.com/sap/support/notes/949971
Please also check the related notes in the above note. -
Sap notes for 103 movement type and 105 movement types in sap
Hi all,
Please let me know if there are any sap notes for 103 movement type and 105 movement type in sap as soon as possible
points will be awarded.
thanking u in advance,
srinivas.There are many SAP notes related to these movement types e.g 514609,750836,
533833, 808029, 317823,etc.
You can search them at http://service.sap.com
Regards,
Amit -
SAP Note for XD99 : Data changed but Output screen show error message
This is regarding the XD99.. Mass data update.
I am looking for SAP Note to fix it. Here data is changed KNA1-Name1 but output shows the Error message..
Is there any Sap Note for this.
Edited by: Mukesh Mahajan on Dec 9, 2010 2:45 PM
Edited by: Mukesh Mahajan on Dec 9, 2010 2:47 PM
Moderator message: please have a look in the Service Marketplace yourself.
Edited by: Thomas Zloch on Dec 9, 2010 2:58 PMHi there, gwinslo. You have come to the right place.
From what I have been reading from other posts on this forum, the issue may
be caused by the clear history settings.
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar. Then '''Tools > Options > Privacy'''.
The button next to '''History''', select '''Use Custom Settings'''.
At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
At the far right, press the '''Settings''' button. Turn on ONLY '''Cache''' and
'''Form And Search History''' leaving the others off.
'''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s''' {web link}
This is not a cure but will make it easier if Firefox locks up. -
Need SAP GUI for Mac and process of how to install and configure
Hi Experts,
I need SAP GUI for Mac. Also please explain the process of how to install, how to configure etc? Please help me.You can download the SAP Presentation DVD that will have the SAPGUI Java version for OS X. After you install, just run the app from the Application Folder.
For config there are a few options:
1. To connect to a DI directly. After starting the app, click new and under the "Advanced" tab use the following string:
conn=/H/(hostname)/S/(port / 3200 for instance ID 00)
2. To connect to a login group. After starting the app, open the "Preferences" / Configuration / Messageservers, you need to set a path to a file that has the message servers in the following string
(SID) : /M/(hostname)/S/(message server port)
Then click "New" and on the first tab you can choose a system and login group.
Hope this helps.
Thank
matt -
Hi,
I am searching for a SAP NOTE for an Error in MB01
Error is :Check Table BIWE: Entry 0004 not found.
Please let me know if anybody implemented note for this error.
Iam searching in SAP Marketplace but didn't find the right one.
<removed_by_moderator>
Thanks,
Rhea.
Edited by: rhea on Jul 24, 2008 4:21 PM
Edited by: Julius Bussche on Oct 7, 2008 5:09 PMError No is M7001.
This error is raised when the internal table BIWE and MSEG doesn't match ie. biwe-zeile NE mseg-zeile.
I searched with those keywords (BIWE , MB01) but didn't find the right one.
Regards,
Rhea. -
Regarding SAP notes for Budget-2007
Hi all
can anybody tell me the sequence the sap notes for budget 2007
as our client using 4.6 C version of SAP
helpful answer will get awarded
Thanks in Advancehi Santosh
thanks for reply really valauable answer u have given
actually we r going to implicate the CIN for Budget -2007 and the current pacakge they r using is SAPKIPNG07
could u tell me please how to upgrade the Patch level actually i didn't do any upgrade but i will have to do
please give me the response of this
thanks -
Need the note for 632429 in sap basis
my friend working in sap bw server got an error where to see the sap note this number please reply
Hi,
You need to look in service.sap.com.
You'll need to have userid & pwd for this. Check with your basis consultant to provide one for you.
Check the note details for now.
Summary
Symptom
This note concerns additions to the system switch or component upgrade, and an ADD-ON component that existed before the upgrade.
It also refers to errors in the guide or problems during the upgrade that only occurred after the guide was created.
Other terms
Add-On, ADD_ON, ADDON, ADDON_INFO, PREPARE
R/3 Enterprise
Reason and Prerequisites
You want to perform a system switch or component upgrade and have already installed an add-on component in your system.
The ADDON_INFO PREPARE phase (in the 'initialization' PREPARE module) recognized this prerequisite and this composite SAP note was created as a result.
Use the list below to check if one or more of the add-ons in the list are installed in your system.
The attached note contains other important information you require for the system switch or component upgrade.
If your system contains an add-on of an SAP software partner, the upgrade will always refer you to this note. Contact the vendor of the partner add-ons to receive additional information about the upgrade, if necessary.
Solution
This note is updated on a regular basis;
obtain the latest version before you start the upgrade.
History (LIFO) 24.04.2007 AOFTOOLS 400_710
08.12.2006 AUTOID_INT
03.11.2006 DBM 600, DBMC 100
10.10.2006 RCX 600, FCX 600, DDS 600
27.09.2006 DMIS
04.08.2006 IS-M/AMC 200
14.07.2006 NRX 306_600, 305_500
12.07.2006 OSEM 500, RCXEM 500
05.07.2006 REBK01 250, REBKXL 100, REBKXL 470
30.06.2006 FINBASIS, SEM-BW
12.04.2006 AOFTOOLS 351, 400
13.03.2006 BANK-ALYZE
06.03.2006 EA-IPPE
02.03.2006 KJCHM 601
24.02.2006 BI_CONT 353, 702, 703
06.02.2006 OSEM 410, RCXEM 410
24.11.2005 IS-PS-XT 600
04.10.2005 ISREA 510
12.01.2005 SLL_PI, ST-PI 003C, ST-PI 2005_1
15.12.2004 ECC-DIMP 500, P3A V500
20.10.2004 C-CEE, HR-CEE
28.09.2004 SLL-LEG
24.06.2004 WP-PI, PI_BASIS
04.06.2004 LSOFE, ERECRUIT, WFMCORE
03.03.2004 ECC 500
16.07.2003 CSC-ABPL, HR-KR+CN
16.06.2003 BANK/CFM 463_20
16.06.2003 Release note
SAP ERP Central Component 600 (ECC 600) ADD-ON RELEASE NOTE
NRX 306_600 954621
IS-PS-XT 600 890090
KJCHM 601 921295
EA-IPPE 400 914554
REBK01 250 960415
RCX 600 973274
FCX 600 973273
DDS 600 973272
DBM 600 983872
DBMC 100 983872
SAP ERP Central Component 500 (ECC 500)
Note 700778 contains a constantly updated list of all add-ons that are integrated in ECC 500 - this note contains references to the add-on specific information for the upgrade.
ADD-ON RELEASE NOTE
NRX 305_500 924462
ISREA 510 882097
SCM_BASIS 410 753272, Section I
WP-PI 723189, 789554
C-CEE 105_500 574102
HR-CEE 105_500 776578
ECC-DIMP 500 717818
P3A V500 778122
SLL_PI 700779
ST-PI 003C 606041
ST-PI 2005_1 769519
MRSS 500 889961
EA-IPPE 300 914554
AUTOID_INT 884658, 738424
You use SCM 5.0.
ADD-ON RELEASE NOTE
OSEM 500 952165
RCXEM 500 952166
You use SCM 4.1.
ADD-ON RELEASE NOTE
OSEM 410 919794
RCXEM 410 922117
EA-IPPE 300 914554
Solution Manager 4.0
ADD-ON RELEASE NOTE
ST 310 892412
ST 320 892412
ST-SUP 310 892412
ST-SUP 320 892412
ST-SER 892412
TMWFLOW 320 892412
CPROJECTS 310_620 892412
ST-ICO 892412
Web Application Server 620
ADD-ON RELEASE NOTE
DMIS 2006_1_620 970534
DMIS_CNT 2006_1_620 970539
NetWeaver 2004
ADD-ON RELEASE NOTE
AOFTOOLS 351 736572
BI_CONT 353 774933
ERECRUIT 300 717803
DMIS 2006_1_640 970534
DMIS_CNT 2006_1_640 970539
LSOFE 300 718625
WFMCORE 110_640 718627
WP-PI 723189, 789554
SLL-LEG 300_640 754698
ST-PI 003C 606041
ST-PI 2005_1 769519
FINBASIS 300 718455
SEM-BW 400 718455
NetWeaver 2004s
ADD-ON RELEASE NOTE
AOFTOOLS 400 921103
BI_CONT 702 847019
BI_CONT 703 916834
BANK-ALYZE 50 920370
DMIS 2006_1_700 970534
DMIS_CNT 2006_1_700 970539
FINBASIS 600 852448
MDM_TECH 555_700 1024362
SEM-BW 600 852448
SLL-LEG 700 853060
SLL-LEG 710 970465
IS-M/AMC 200 965483
SAP NetWeaver 7.1 (AS ABAP)
ADD-ON RELEASE NOTE
AOFTOOLS 400 921103
R/3 Enterprise Extension Set 2.0 (R/3 47x200)
Note 625318 contains a constantly updated list of all add-ons contained in R/3 Enterprise 47x200 - this note contains references to the add-on-specific information for the upgrade.
ADD-ON RELEASE NOTE
BANK/CFM 463_20 352072, section II(8)
CSC-ABPL 606860, 159979, 640520
HR-KR+CN 159979, 549368, 535649, 351062
RBD see Note 625318
ST-PI 003C 606041
ST-PI 2005_1 769519
EA-IPPE 200 914554
Regards, Siva -
I need default values for APEX form fields. How do I do this?
Hello,
I am trying to set a default value in my form so that there will not get a null value. I have gone to the Column Defaults page and filled out the following fields in From Defaults:
Default Value: 0
Required: Yes
Help Text: Please enter a number.
When I add a record set or update a record and do not fill in the field, neither does it prompt me to fill it in or has a default value. It is blank.
Can someone tell me what I am doing wrong?
Thanks
lehHi leh,
Defaults:
Click on the page item, go to the Default section, enter your value into the Default value area.
Validations:
It's not quite as automatic as you are thinking.
You'll need to add a Validation process for the item.
First you go to the Page Processing section, then the Validations section, click the creation icon in the Validation section. You will first have the choice to create an item level or page level validation. Either will work. Next you will select the item you want to validate. Then, select Item Not Null. On one of the next pages you will be able to enter the error message. It's all pretty straightforward.
Tony -
To add F4 help for goods recipient field in MIGO
Hello,
I've a requirement in migo, under the details data, we have a "where" tab.
Under this tab, there is a field "Goods Recipient" for input.
Now I've to add a F4 search help for this input field such that it picks up from my ZTABLE.
Can anyone please suggest how to add the search help for this field.
Can this be performed using a field exit or any userexit. MBCF0005 or badi MB_MIGO_BADI ?
Please guide me and thanks in advance.
~With Regards,
HimThanks Rupali,
I've already created my search help and search help goes well with any of my ztable or zprogram. But, the field where I want to add my search help is a standard migo program SAPLMIGO, and the field where I want to add search help is "good recipient" field under "where" tab of "migo" transaction.
And the name of the field is WEMPF, which belongs to the sap standard structure GOITEM.
So, SAP wont allow me to edit it's standard tables. Is there any other alternative?
~With Regards,
Him
Maybe you are looking for
-
Use action to send e-mail and attach e-mail to docflow
Hello guys, I am having troubles achieving the following: My task is to create an action for a specific transaction type and send out an e-mail (I already finished this part). The e-mail should be available in the transaction history of the transacti
-
Windows Compatible Software Question
I just got an iPod Nano so I'm very new to this and I just have a quick (probably dumb) question......Can someone please tell me if my iPod work with or be compatible with Windows ME? Thanks a million! Texas Kelly
-
Can't create new files nor open existing ones.
It's been a while since I last used photoshop, a similar kind of problem made me move away from the product, but the new features in CS6 are enticing enough for me to be interested in trying it again. My problem is that, while the interface is comple
-
Trying to update iPhone 4 to the latest iOS 5, the error "cannot update due to incompatible firmware" prevents install. Any idea on where to find firmware update or resolve?
-
I am hoping someone has the answer to my problems. Using an Imac latest version of CS3 photoshop and latest version Os 10.5. 1. When printing a whole series of photos I have to reselect photoshop manages colors every time and then choose my profile e