Need SAP Segment Change or Update for LSMW

Our LSMW person is using a segment E1BPCHARACTDETAIL, in his LSMW Field Mapping. This segment is in an hierarchy that falls under E1CHARACTERISTIC_CREATE. Our LSMW person uses E1BPCHARACTDETAIL because he according to him it is the equivalent of BAPI BAPICHARACTDETAIL.Which makes sense.
The problem is that BAPICHARACTDETAIL has two more components/fields to map at the end of the structure. However, E1BPCHARACTDETAIL does not have these two fields, and it needs them.
Also, in WE31, E1BPCHARACTDETAIL uses segment E2BPCHARACTDETAIL000, and is the only version listed in the version window in WE31.
How do I get the two fields onto the end of E1BPCHARACTDETAIL (segment E2BPCHARACTDETAIL000), that is a subordinate of E1CHARACTERISTIC_CREATE?
Is there a newer version I can pull, or use somewhere? Di I get SAP access and dev key, and try to update the SAP segments on my own?
This uses basic type, in WE30, CHARACTERISTIC_CREATE01.
Any input is greatly appreciated. Thank-You
Edited by: TMM on Dec 11, 2008 9:31 AM

First of all get details of the vendor using BAPI vendor get detail and then update.
There is one bapi but this is online. BAPI_VENDOR_EDIT

Similar Messages

Could sap do mass craete/update for material master classification?

Hi Expert,
Now we craeted new classifcaiton for material master. It need be assigned to related many parts. May I query Could sap do mass craete/update for material master classification? How to do this ?
Thanks
Alice

Hi,
Another option is using LSMW, please refer to below thread for more details:
Classification view in MM01 with LSMW
cheers,

Modem encryption needs to be changed in order for airtunes to work?

Hi all,
I was happily listening to airtunes, closed the mac, opened it and airport express then had a flashing amber light. Now, if I try airtunes it won't work thru my speakers. I can only hear music thru the macbook. I spent a fair amt of time today on the phone with mac support and was told that my modem encryption needs to be changed. Apparently it has to go from WEP to WPA?
Has anyone else had to do this in order for airtunes to work? It was working fine and then poof, gone.

I've fixed the issue. I called support back again after reading this http://support.apple.com/kb/TS2098
and the girl on the phone was wonderful. We changed the setting from wep 128 to wep 40 and it works!

I need help with getting an update for my 1st generation ipod shuffle.

I am trying to install iTunes and iPod software on my computer but the iPod cd is apparently not compatible with my version of windows. I need to download an update but I cannot get any support because my 1st generation iPod shuffle is not one of the selections available for support. Does anyone know how I can download the update I need?

Neil, I installed itunes but that hasn't helped the issue I am having with my 1st generation iPod. I have searched and searched but there is nothing that allows me to update my iPod, download to my iPod, all I see is iPhone or iPad, neither of which I happen to own, so I am still at square one with my problem. I can't get any Apple support because my iPod is not one of the choices, no mention of the 1st generation. It's as if it no longer exists and there is no support available. I tried plugging it into my usb port, hoping that something would pop up on the screen and give me guidance, but alas, that failed as well. I feel like this whole thing is an exercise in futility. Thanks for your attempt to assist me.

Country changed,no update for apps??

please help me,,
i changed my country from USA to INDIA .for purchasing apps in INDIA..but i am not getting updated with those apps which i previously purchased in USA..
IS THIS A BUG??.......
whats the solution for getting my previously purchased apps UPDATED..

There is no 'solution'. When I moved countries I could no longer able to go to the stores I had visited in the other country. Despite many companies being multinational, in reality when it comes down to the details they are restricted by the laws of each country and regional restrictions imposed upon them by the owners of the things they sell. I can go to a Ford dealership in the USA but I cannot buy the same cars I see in a Ford dealership in Europe. You have essentially imported a USA model of an application and cannot get spare parts for it in India.

Where i can change my update for the all version of photoshop?

I buy it thinking I could upgrade but does not update me that I have the original version but 2.5 and I want to buy the new program cs6, where can I change it?

If you want to purchase CS6, you must buy the full scale version. If you want to subscribe (pay by month), you must join the Creative Cloud.
Creative Suite 6
Nancy O.

I keep getting the message that I need to download the images update to open old documents. The update was downloaded on 11/24/13. Checking for new updates shows all updates have been made. What is the issue?

I keep getting the message that I need to download the new update for ipages when opening old documents. The latest update that I have download was done 11/24/13. When I check for updates it shows that there are no new updates available. I downloaded Maverick a few weeks back on to my iMac. What is the issue

You have both your older iWork apps and the newer Maverick apps on your computer.
The new Maverick apps are in the Applications folder.
The older iWork apps are in the Applications/iWork folder.
Of the two, the older iWork apps are more useful so don't throw them out.
Check out about Pages 5, keeping the older Apps and how to manage updates here:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=6f02f15454adf b3c68b0a871f2ed6447&mforum=iworktipsntrick
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=432&mforum=iworktips ntrick
Peter

HT2305 I need helping with re-installing Apple Software Update for Windows Vista, please. :)

Hello, I will get my new Ipad 2 32GB on April, so I will have enjoying with Ipad with bringing up my excitement on Ipad. I need re-installing Apple Software Update for Windows Vista 32bit, but I did install iTunes, Safari, and Iphone configuration utility that it did not included Apple Software Update software. Please send me download file of Apple Software Update, immediate. Thanks
I do not certain about Ipad configuration utility, would be working with Iphone configuration utility?
david

I went into checking with Apple Software Update then I clicked Control Panel - "Repair" It was restored to start menu, thank you much thumb up to b noir Big Helping me! David

Need firefox(4.0) update for norton antivirus auto login bar.

i need to know when the update for the norton auto sign in toolbar for firefox 4.0 is going to come out and how to get it when it does...much appreciated

ok thank you.the reason why i went here is because i did go to symtech and hey told me trhere was an update coming soon.i just need to know when and if it will auto update and install it

Will there be a WiFi update for iPod Touch?

I recently got a iPod touch so I could access the internet anywhere on OSU's Campus. For some reason I cannot connect because none of the passwords I have seem to work. I was told that I needed a 802.1x WiFi update for the iPod Touch. Where can I get this, if it is available? I really need some way of getting the internet to work.
Thanks

No, such an update is not currently available. Whether it ever will be is impossible for anyone but Apple to say and they generally don't announce such things ahead of time. I'm sorry that the Touch isn't doing what you want but it sounds as if you may really need a laptop, not a digital media player.

Keep getting a window to install a security update for Firefox 25.0.1. I have installed it 3 times already and still get the notice to install it again.

At least twice a day I get a pop up window alerting me to the need to install a security update for Firefox 25.0.1. I have installed it several times and still I am prompted to install it again. I have received no response from Mozilla on this issue. I had sent in an email about this several days ago.

Please note that all technical support is performed through this site. Mozilla will not respond to emails requiring technical support.
'''Try Firefox Safe Mode''' and updating while in safe mode to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Please report back soon.

Advice needed: what does your company log for SAP security role changes?

My client has a situation where for many years, they never logged changes to SAP security roles. By that I mean, they never logged even basic details, like who requested a change, tested it, approved it, and what changed!! Sadly their ticketing system is terrible, completely free-form text and not even searchable.
Does anyone here use Word docs, Excel sheets, or some other way to capture security role change details? What details do you capture? What about Projects, that involve dozens of changes and testing over several months?
I plan to recommend, at least, they need to use a unique# (a ticket#, or whatever) for every change and update the same in PFCG role desc tab, plus in CTS description of transports... but what about other details, since they have a bad ticketing system? I spoke with internal audit and change Mgmnt "manager" about it, and they are clueless and will not make recommendations. It's really weird but they will get into big trouble eventually without any logs for security changes!

Does anyone here use Word docs, Excel sheets, or some other way to capture security role change details? What details do you capture? What about Projects, that involve dozens of changes and testing over several months?
I have questions:
a) Do you want to make things straight
b) Do you want to implement a versioning mechanism
c) You cannot implement anything technical, but you`re asking about best "paper" practise?
The mentioned scenarios can be well maintained if you use SAP GRC Solutions 10 (Business Role Management)
Task Based, Approvals, Risk Analysis, SOD and role generation and maintenance in a structured way (Business Role Management). Workflow based, staged process with approvals.
PFCG transaction usage will be curtailed to minimum if implemented fully.
Do we really want to do things "outside" PFCG?
@all:
a) do you guys use custom approval workflows for roles?
b) how tight your processes are? how much paperwork, workflow, tickets, requests and incidents you have to go through to change a role?
c) who is a friend of GRC here, raise your hand
Cheers Otto
p.s.: very interesting discussion, I would like to learn something here about how it works out there in the wild

How to update a large (over 4 million item) List(Of Byte) quickly by altering indexes contained in a Dictionary(Of Integer, Byte) where the Dictionaries keys are the indexes in the List(Of Byte) that need to be changed to the values for those indexes?

   I'm having some difficulty with transferring images from a UDP Client to a UDP Server. The issue is receiving the bytes necessary to update an original image sent from the Client to the Server and updating the Servers List(Of Byte) with the
new bytes replacing bytes in that list. This is a simplex connection where the Sever receives and the Client sends to utilize the least amount of bandwidth for a "Remote Desktop" style application where the Server side needs image updates of whatever
occurs on the Client desktop.
   So far I can tranfer images with no issue. The images can be be any image type (.Bmp, .Gif, .JPeg, .Png, etc). I was working with sending .JPeg's as they appear to be the smallest size image when a Bitmap is saved to a memory stream as type
.JPeg. And then I am using GZip to compress that byte array again so it is much smaller. However on a loopback on my NIC the speed for sending a full size screen capture is not very fast as the Server updates fairly slowly unless the Clients screen capture
Bitmap is reduced in size to about 1/3'd of the original size. Then about 12000 bytes or less are sent for each update.
   Due to .JPeg compression I suppose there is no way to get the difference in bytes between two .JPegs and only send those when something occurs on the desktop that alters the desktop screen capture image. Therefore I went to using .Bmp's as each
.Bmp contains the same number of bytes in its array regardless of the image alterations on the desktop. So I suppose the difference in bytes from a second screen capture and an inital screen capture are what is different in the second image from the initial
image.
   What I have done so far is save an initial Bitmap of a screen capture using a memory stream and saving as type .Bmp which takes less than 93 milliseconds for 4196406 bytes. Compressing that takes less than 118 milliseconds to 197325 bytes for
the current windows on the desktop. When that is done PictureBox1 is updated from nothing to the captured image as the PictureBox's background image with image layout zoom and the PictureBox sized at 1/2 my screens width and 1/2 my screens height.
   Then I save a new Bitmap the same way which now contains different image information as the PictureBox is now displaying an image so its back color is no longer displayed (solid color Aqua) and the cursor has moved to a different location. The
second Bitmap is also 4196406 in bytes and compressed it was 315473 bytes in size.
   I also just found code from this link Converting a Bitmap to a Byte Array (and Byte Array to Bitmap) which gets a byte array
directly from a Bitmap and the size of that is 3148800 for whatever is full screen captured on my laptop. So I should be able to work with smaller byte arrays at some point.
   The issue I'm having is that once the Client sends an image of the desktop to the Server I only want to update the server with any differences occuring on the Clients desktop. So what I have done is compare the first screen captures bytes (stored
in a List(Of Byte)) to the second screen captures bytes (stored in a List(Of Byte)) by using a For/Next for 0 to 4196405 where if a byte in the first screen captures List is not equal to a byte in the second screen captures List I add the index and byte of
the second screen captures list to a Dictionary(Of Integer, Byte). The Dictionary then only contains the indexes and bytes that are different between the first screen capture and second screen capture. This takes about 125 milliseconds which I think is pretty
fast for 4196406 byte comparison using a For/Next and adding all the different bytes and indexes for each byte to a Dictionary.
    The difference in Bytes between the inital screen capture and the second screen capture is 242587 as an example which changes of course. For that amount of bytes the Dictionary contains 242587 integers as indexes and 242587 bytes as different
bytes totaling 485174 bytes for both arrays (keys, values). Compressed the indexes go from 242587 to 43489 bytes and the values go from 242587 to 34982 bytes. Which means I will have to send 78, 481 bytes from the Client to the Server to update the display
on the server. Quite smaller than the original 4196406 bytes of the second Bitmap saved to type .Bmp or the compressed size of that array which was 315473 bytes. Plus a few bytes I add as overhead so the server knows when an image array ends and how many packets
were sent for the array so it can discard complete arrays if necessary since UDP is lossfull although probably not so much in current networks like it may originally have been when the internet started.
    In reality the data from the Client to the Server will mostly be the cursor as it moves and updating the Server image with only a few hundred bytes I would imagine at a time. Or when the cursor selects a Button for example and the Buttons
color changes causing those differences in the original screen capture.
   But the problem is if I send the Dictionaries Indexes and Bytes to the Server then I need to update the original Bitmap List(Of Byte) on the server by removing the Bytes in the received informations Index locations array from the Servers Bitmap
List(Of Byte) and replacing those Bytes with the Bytes in the received informations Byte array. This takes so long using a For/Next for however many indexes are in the received informations Index array to update the Bitmap List(Of Byte) on the server using
"Bmp1Bytes.RemoveAt(Index As Integer)" followed by "Bmp1Bytes.Insert(Index As Integer, Item As Byte)" in the For/Next.
    I've tried various For/Next statements including using a new List(Of Byte) with If statements so If the the integer for the For/Next ='s the Key in a Dictionary(Of Integer, Byte) using a Counter to provide the Dictionaries Key value then
the Dictionaries byte value will be added to the List(Of Byte) and the counter will increas by one Else the List(Of Byte) adds the original "Bmp1Bytes" byte at that index to the new List(Of Byte). This takes forever also.
   I also tried the same For/Next adding to a new Dictionary(Of Integer, Byte) but that takes forever too.
   I think I could use RemoveRange and AddRange to speed things up. But I don't know how to retrieve a contiguous range of indexes in the received indexes that need to be updated in the servers "Bmp1Bytes" List(Of Byte) from the received
array of indexes and bytes which are in a Dictionary(Of Integer, Byte). But I believe this would even be slower than some realistic method for replacing all Bytes in a List(Of Byte) when I have the indexes that need to be replaced and the bytes to replace
them with.
   Even if I just used AddRange on a new List(Of Byte) to add ranges of bytes from the original "Bmp1Bytes" and the changes from the Dictionary(Of Integer, Byte) I think this would be rather slow. Although I don't know how to do that
by getting contiguous ranges of indexes from the Dictionaries keys.
   So I was wondering if there is some method perhaps using Linq or IEnumerable which I've been unable to figure anything out which could do this.
   I do have some copy and pasted code which I don't understand how it works that I am using which I would guess could be altered for doing something like this but I can't find information that provides how the code works. Or even if I did
maybe I can't understand it. Like the code below which is extremely fast.
   Dim strArray() As String = Array.ConvertAll(Of Integer, String)(BmpComparisonDict.Keys.ToArray, Function(x) x.ToString())
La vida loca

Monkeyboy,
That was quite a bit to read, but still a bit unclear. Could you put a specific list of goals/questions, asked in the smallest possible form?
It seems like either you're making a program that monitors activity on your computer, or you're writing some kind of remote pc app.
When you do get your bytes from using lockbits, keep in mind all the files header info would be lost. I think retaining the header info is worth the extra bytes.
The other, thing: I'm not sure if you're taking 32bpp screen shots, but also keep in mind that the "whole desktop" is the final destination for blended graphics, if that makes sense. What I mean is that there is no need to capture an "alpha"
channel for a desktop screenshot, as alpha would always be 255, this could save you 1 byte per pixel captured... Theres nothing "behind" the desktop, therefore no alpha, and every window shown above the desktop is already blended. I suggest using
24Bpp for a full screen capture.
Your X,Y information for the mouse could be stored as UINT16, this would save you a measly 2 bytes per location update/save.
When you update your byte arrays, maybe you can turn the array into a stream and write to whatever index, however many bytes, that should prevent a "Shift" of bytes, and instead overwrite any bytes that "get in the way".
ex
Dim example As String = "This is an example."
Dim insertString As String = "was"
Dim insertBytes As Byte() = System.Text.Encoding.ASCII.GetBytes(insertString)
Dim bytes As Byte() = System.Text.Encoding.ASCII.GetBytes(example)
Dim modifiedBytes As Byte() = {}
Using ms As New System.IO.MemoryStream(bytes)
ms.Position = 5
ms.Write(insertBytes, 0, 3)
modifiedBytes = ms.ToArray
End Using
Dim newString As String = System.Text.Encoding.ASCII.GetString(modifiedBytes)
'Notice how below there isn't the word "is" anymore, and that there isn't a
'space.
'This demonstrates that you overwrite existing data, versus shifting everything to
'the right.
'Returns: This wasan example.
MsgBox(newString)
“If you want something you've never had, you need to do something you've never done.”
Don't forget to mark
helpful posts and answers
! Answer an interesting question? Write a
new article
about it! My Articles
*This post does not reflect the opinion of Microsoft, or its employees.
Well it's too much to read. I was really tired when I wrote it. Even the below is too much to read but perhaps gets the point across of what I would like to do which I think
Joel Engineer may have answered but I'm not sure. As I'm still too tired to understand that yet and research what he said in order to figure it out yet.
But maybe the code below can provide the concept of the operation with the comments in it. But seeing as how I'm still tired it may be confused.
Option Strict On
Imports System.Windows.Forms
Imports System.IO
Imports System.IO.Compression
Imports System.Drawing.Imaging
Imports System.Runtime.InteropServices
Public Class Form1
Dim Bmp1Bytes As New List(Of Byte)
Dim Bmp1BytesCompressed As New List(Of Byte)
Dim Bmp2Bytes As New List(Of Byte)
Dim BmpComparisonDict As New Dictionary(Of Integer, Byte)
Dim BmpDifferenceIndexesCompressed As New List(Of Byte)
Dim BmpDifferenceBytesCompressed As New List(Of Byte)
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
SomeSub()
End Sub
Private Sub SomeSub()
' Pretend this code is in UDP Client app. A screen capture is performed of the desktop. Takes about 90 milliseconds.
Bmp1Bytes.Clear()
Using BMP1 As New Bitmap(Screen.PrimaryScreen.Bounds.Width, Screen.PrimaryScreen.Bounds.Height)
Using g1 As Graphics = Graphics.FromImage(BMP1)
g1.CopyFromScreen(0, 0, 0, 0, BMP1.Size)
Cursor.Draw(g1, New Rectangle(Cursor.Position.X, Cursor.Position.Y, Cursor.Size.Width, Cursor.Size.Height))
Using MS As New MemoryStream
BMP1.Save(MS, System.Drawing.Imaging.ImageFormat.Bmp)
Bmp1Bytes.AddRange(MS.ToArray)
End Using
End Using
End Using
Bmp1BytesCompressed.AddRange(Compress(Bmp1Bytes.ToArray))
' UDP Client app sends Bmp1BytesCompressed.ToArray to UDP Server which is the entire image of the desktop that the UDP
' Client is on. This image takes awhile to send since compressed it is about 177000 bytes from over 4000000 bytes.
' I will be using different code just to get the bytes from the actual Bitmap in the future. That is not important for now.
' Pretend the UDP Server has received the bytes, decompressed the array received into a List(Of Byte) and is displaying
' the image of the UDP Clients desktop in a PictureBox.
' Now the image on the UDP Clients desktop changes due to the mouse cursor moving as an example. Therefore a new Bitmap
' is created from a screen capture. This takes about 90 milliseconds.
Bmp2Bytes.Clear()
Using BMP2 As New Bitmap(Screen.PrimaryScreen.Bounds.Width, Screen.PrimaryScreen.Bounds.Height)
Using g1 As Graphics = Graphics.FromImage(BMP2)
g1.CopyFromScreen(0, 0, 0, 0, BMP2.Size)
Cursor.Draw(g1, New Rectangle(Cursor.Position.X, Cursor.Position.Y, Cursor.Size.Width, Cursor.Size.Height))
Using MS As New MemoryStream
BMP2.Save(MS, System.Drawing.Imaging.ImageFormat.Bmp)
Bmp2Bytes.AddRange(MS.ToArray)
End Using
End Using
End Using
' Now I have the original images bytes in Bmp1Bytes and the new images bytes in Bmp2Bytes on the UDP Client. But I don't
' want to send all of the bytes in Bmp2Bytes to the UDP Server. Just the indexes of and the bytes that are different in
' Bmp2Bytes from Bmp1Bytes.
' This takes less than 100 milliseconds for what I've tested so far where over 500000 bytes in Bmp2Bytes are different
' than the bytes in Bmp1Bytes. Usually that amount would be much less. But during testing I was displaying the image
' from Bmp1 bytes in a PictureBox so a large amount of data would change between the first screen shot, the PictureBox
' then displaying an image on the same PC and then the second screen shot.
BmpComparisonDict.Clear()
For i = 0 To Bmp1Bytes.Count - 1
If Bmp1Bytes(i) <> Bmp2Bytes(i) Then
BmpComparisonDict.Add(i, Bmp2Bytes(i))
End If
Next
' So now I have all the difference bytes and their indexes from Bmp2Bytes in the BmpComparisonDict. So I compress
' the indexes into on List and the Bytes into another List.
BmpDifferenceIndexesCompressed.Clear()
BmpDifferenceBytesCompressed.Clear()
BmpDifferenceIndexesCompressed.AddRange(Compress(BmpComparisonDict.Keys.SelectMany(Function(d) BitConverter.GetBytes(d)).ToArray()))
BmpDifferenceBytesCompressed.AddRange(Compress(BmpComparisonDict.Values.ToArray))
' Now pretend the UDP Client has sent both those arrays to the UDP Server which has added both decompressed arrays
' to a Dictionary(Of Integer, Byte). And the server has the original image decompressed bytes received in a List
' called Bmp1Bytes also.
' This is where I am stuck. The UDP Server has the Dictionary. That part was fast. However there is no
' fast method I have found for creating a new List(Of Byte) where bytes in the originally received List(Of Byte) that
' do not have to be altered are placed into a new List(Of Byte) except for the indexes listed in the
' Dictionary(Of Integer, Byte) that need to be placed into the appropriate index locations of the new List(Of Byte).
' The below example for doing so is exceptionally slow. Pretend UpdateDictionary has all of the decompressed indexes
' and bytes received by the UDP Server for the update contained within it.
Dim UpdateDictionary As New Dictionary(Of Integer, Byte)
Dim UpdatedBytes As New List(Of Byte)
Dim Counter As Integer = 0
For i = 0 To Bmp1Bytes.Count - 1
If i = UpdateDictionary.Keys(Counter) Then ' Provides the index contained in the Keys for the Dictionary
UpdatedBytes.Add(UpdateDictionary.Values(Counter))
Counter += 1
If Counter > UpdateDictionary.Count - 1 Then Counter = 0
Else
UpdatedBytes.Add(Bmp1Bytes(i))
End If
Next
' So what I'm trying to do is find an extremely fast method for performing something similar to what the
' above operation performs.
End Sub
Private Function Compress(BytesToCompress() As Byte) As List(Of Byte)
Dim BytesCompressed As New List(Of Byte)
Using compressedStream = New MemoryStream()
Using zipStream = New GZipStream(compressedStream, CompressionMode.Compress)
zipStream.Write(BytesToCompress, 0, BytesToCompress.Count)
zipStream.Close()
BytesCompressed.AddRange(compressedStream.ToArray)
End Using
End Using
Return BytesCompressed
End Function
Private Function Decompress(BytesToDecompress() As Byte) As List(Of Byte)
Dim BytesDecompressed As New List(Of Byte)
Using DecompressedStream = New MemoryStream()
Using zipStream = New GZipStream(DecompressedStream, CompressionMode.Decompress)
zipStream.Write(BytesToDecompress, 0, BytesToDecompress.Count)
zipStream.Close()
BytesDecompressed.AddRange(DecompressedStream.ToArray)
End Using
End Using
Return BytesDecompressed
End Function
End Class
La vida loca

I bought this MAC from a family member. Did everything need to change items to my apple id. Today I did the update for IOS Yosemite now the app store is auto filling with someone else id?? But they seem to be my apps??

I bought this MAC from a family member. Did everything need to change items to my apple id. Today I did the update for IOS Yosemite now the app store is auto filling with someone else id?? But they seem to be my apps??

If you didn’t erase the drive and install using you AppleID, then the OS and the purchased apps are still registered to the other AppleID. You cannot change that by logging into iCloud. Apps are forever tied to the AppleID used to purchase/download them.
You have to erase the drive and download/install the Apps using your AppleID.

Bought Used Mac Mini...need help to change email for updates

Purchased an used Mac Mini and I want to change my defaults to my name and get rid of the sellers name, I also need help in changing the email default for getting my updates from Apple. That's the most important to me... I've got 5 updates waiting and the message I receive is to get my updates from the sellers email address. Thanks!!!

What OS is on your Mini? What year/model is the Mini? The seller should have reinstalled the OS that came with the Mini instead of just selling it to you as is.
Once you determine the OS, you can erase your Mini's Macintosh HD and reinstall the OS which will allow you to setup your own account during the Setup process.

Need SAP Segment Change or Update for LSMW

Similar Messages

Maybe you are looking for