Need SATA RAID driver for RS480M2-IL(ms-7093) to install XP
Greetings,
I have lost my floppy to install the driver for my SATA RAID and can't seem to find the right one anywhere on the web.
It's an ATI SB400 chipset that has a SIL 3112a RAID controller.
The driver doesn't appear to be on the support page: http://global.msi.com.tw/index.php?func=proddesc&maincat_no=1&prod_no=214
If anyone can point me in the right direction, you'd be my hero.
Thanks in advance,
Jeff
Well, I found the correct driver, I think. It was in the ATI System driver package, on this page: http://global.msi.com.tw/index.php?func=driverfile&dno=2427&i=1
However, I still can't get XP to recognize my drive by pressing F6 at install. Perhaps I'm not using the right files from this package (287MB!). I found what I thought might be the correct drivers in the following folder: ATIDrv/SBDrv/RAID4xx and copied all the files to a floppy. Windows sees this driver and loads it, but when it gets to the point of formatting a drive (or whatever the next step is after you hit F^ and load the driver), it says no HD found, hit F3 to restart (sure would be nice to have other options here, like load another driver).
So, here's more info about my system (read the posting guidelines since last time
mobo: RS480M2-IL BIOS 7093v39
PS:Thermaltake TR2-430NP
RAM: G.Skill PC3200 1GBx2
HD1:Seagate Barracuda 7200.10 160GB
HD2:Maxtor Diamondmax20 160GB
Problem started when co-worker shut the machine off hard. On reboot, Invalid System Disk error and looking at RAID Bios shows drives in SYNC state. Removed the drives and attached to another machine, one looks fine so I clone it for good measure. The other is corrupted, XP wants to format as soon as it's mounted. Checking it with Filescavenger3 shows the files are still there, but I just reformat it since I have the good image of the other disk. Now I'm trying to fix the other drive, since it still comes up as Invalid System Disk, so I want to try either using the Recovery Console to FixMBR, or do a repair install of XP. I can't find the right driver to make this happen. I do have a disk with LastXPv2.11 that will recognize the drive, but it doesn't allow me to get into the recovery console or offer to repair xp. If you know how to extract the drivers from a slipstreamed disc, that might work too. Finally, I don't know if I've update the RAID bios, or if that happens when you update the mobo bios. I did update that to v39 and the RAID BIOS shows 4.2.50.
Sorry this is so long, any ideas to help get me going here would be fantastic
Cheers,
Jeff
Similar Messages
-
Need sata f6 driver for neo 4 ultra (winxp 64)
or do u even need a f6 driver for windows 64?
yes i have a sata drive.if you unrar the 64 bit drivers in a folder you get a folder ide
inside are 2 more folders
one says xp one windows 2000
best i can see you need to copy every thing in the xp folder to the floppy
except the raid utility folder
these are what it tells you to copy for 32 bit
Driver for Win2000/XP
Please copy CDROM:
nVidia\System\CK804\IDE\WIN2K or WINXP
disk1 file
idecoi.dll file
nvata.cat file
nvatabus.inf file
NvAtaBus.sys file
nvcoi.dll file
nvide.nvu file
nvraid.cat file
nvraid.inf file
nvraid.sys file
nvraidco.dll file
nvuide.exe file
txtsetup.oem file
so thats every thing bar the raid utility as i said -
K8n neo2-fx Doesn't come with a floppy sata raid driver for XP 64-bit edition
I've been waiting for so long but without any luck.Why don't msi support it although
i can see driver for realtek 64 bit edition and nforce x64?
I'll be waiting for news.Thanks to anyone who will try to help me...download thease drivers: http://www.nvidia.com/object/nforce_udp_winxp64_6.25.html
then look here dude:
https://forum-en.msi.com/index.php?topic=99095.0
and use the same procedure to extract RAID drivers for XP64 and copy to diskette. -
Need Tecra S3 Raid Driver for VISTA
I' find a lot of drivers for install vista on TECRA S3, but not the RAID DIVER. It is essential for install vista. Can anyone help ?
Thanks MikeMaybe Vista does not need the RAID driver? I mean when installing XP on a newer machine you will have to load some drivers but not under Vista.
Did you already installed Vista on your machine?
Cheers -
Need RAID driver for k8t master2-far package didnt come with disk driver
I bought the K8T Master2-FAR and the VIA VT6420/VT8237 Disk Driver was not included. I'm trying to install WinXP64 but I need the raid driver before I can. I went to the download section of msi and select my board but the drivers are all 32bit when i tried to use them. There are several 64-bit drivers on the msi cd under Adaptec and LSI but not sure which one of these would work for me. Can someone show me where I can get the correct 64-bit raid driver for my board?
Thanks for your time.Hi all , I have a MSI K8N MASTER2 FAR S940 SLI MAINBOARD with 2 raptor wd and I need raid driver (for hardware raid). Help me!!!
-
Need RAID Driver for 64-bit WXP - Qosmio F30
Hi everyone..
I'm looking tor Raid driver for winXp x64 bit...
My laptop is Qosmio F30-140
Please help me to find it..
Thanks for help..
SalamHello
I Have RAID Driver for Windows Vista x64
http://cdgenp01.csd.toshiba.com/content/support/downloads/raid011016vista_os2007087a.exe
try it on XP 64 i think it will work
Reaver -
First time install probs with sata raid drive using k7n2g ilsr
hi all!!!
this is the first time i have tried 2 use a sata raid hdd. i dont use a raid drive for my c:, the raid drive is just extra space.
first i formated my pc. i installed the raid drivers, then xp. my pc worked fine. but then after a week it was time 2 try plug the drive in.
when i got my k7n2g ilsr motherboard i di not get a manual. so with the raid drivers installed, i just pluged in the raid drive. the drive seemed fine.... i formatted it and put a couple of games on. but after an hours usage the games would crash (high pitched tone instead of the audio, then full freeze).
i have tried putting these games back on my original drive and they work fine......
anyway....
i wanted 2 know if anyone had any ides what i was doing worng??? are there any settings in the bios that need changing when installing a raid drive????
thanks for any help!!!!!!!ok still formatting drive..... looking over the files on the msi site for my motherboard it has 2 files available for raid drives:
the 'Promise Serial-ATA RAID Drivers' ( which i have installed)
and the 'Promise Serial-ATA RAID Utility' (which i dont hav installed)
do i need the Promise Serial-ATA RAID utility?? and if so how do i install it?? there are no setup files just dll files like the driver.... is istallation the same as the driver?
again, i thank u for your help!!!!! -
I need the Windows XP-64 bit version of the
G72-NVSA042 for nVidia C19+MCP04 SATA RAID Driver
Please, help me. I have bought a MSI K8N SLI mainboard (nVidia nForce 4 SLI chipset based) with an AMD athlon 64 3200 and a SATA hard drive but the mainboard did not bring the 64 bit driver for SATA!!. Only for XP/2000, etc.
¿¿where can I find it??I believe this is what you need. http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_list.php?part=1&kind=4&CHIP=4&COM=4
-
Qosmio G30-175 - Where to find RAID driver for Windows 7?
I have a Toshiba Qosmio G30-175 and I need a raid-driver so I can install Windows 7. My operating system is XP and on Toshiba-homepage I can't find the driver.
Can enyboby help, please?
KennethI have the Qosmio G35 AV600 and just successfully upgraded straight from XP to Win7 Ultimate (32-bit).
I was having problems finding the drivers as well - as Win7 wasn't recognizing the hard-drives.
I did have a copy of the Vista Upgrade Assistant disk from Toshiba. This helped in removing all of the XP drivers, then was great after installing Win7. Virtually all of the drivers appear to be working fine in Win7 - despite being designed for Vista. The only driver I did upload directly from the manufacturer was the Nvidia drivers - which work for all operating systems up to Win7.
If you don't have the memory stick (or have the Upgrade disk), you can do what I did: When it asks you to locate which hard drive you want to put it on, click on browse for driver, remove the win7 install disk, and insert the upgrade disk. You can find it in the following directory on the disk:
Download\vistaup\auto\RAIDDrv
It will find it, download the driver, find the hard drives on your PC. Then, reinsert the Win7 media and install.
You should have no problems after this point.
I noticed that they do have a download on the website for Win7 assitance that you may want to try as well - I'm sure it has the same drivers that you would need. -
Hi everyone...
I have a k7n2 Delta 2 board and have installed everything...but noticed the Sata Raid driver floppy that came with it has become corrupted (probably by me)
Anyway...does anyone know where I can download any Nforce3 sata raid drives from the web (that are reliable)
I am running windows XP Pro
PS. can anyone also tell me is their a certain way to install them and if it would matter which version number to install (sorry just a bit of a computer newbie)
thanks in advancemenace, why did you start a new post when this topic had your answers? i removed your other topic
as sharp says, copy the contents of the IDE folder to a floppy (leaving out the Raidtool sub-folder). note that if you are only using a single SATA drive, you do not need this floppy to install windows, it is only if you are installing onto a RAID array -
Need an instrument driver for Stahl product
Hi guys!
I need an instrument driver for the coil temperature measurement device ER-230.01B (company Stahl)!
Does anybody of you have this driver?
I have already searched in the NI Driver list and couldn't find it.
Thx,
NobbyHi Nobby_83,
Unfortunately we don’t have the driver for your Stahl device. You have to contact Stahl to know if they have the driver.
http://www.stahl.de/en/start.html
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/ -
I need an audio driver for Yoga 13 with Windows 7 Pro 64 bits English
Hi all,
I downgraded my Yoga 13 from Windows 8 to Windows 7 pro 64 bits, and ever since then I have a problem with my microphone.
Skype finds the microphone and can use it, calls are all working fine, but any other program using audio does not work with the microphone.
After troubleshooting, I concluded that I need to update the driver but I cannot find it. Anything that I find on the Lenovo support pages does not install (event the one found on this page: http://support.lenovo.com/fr/fr/downloads/ds002860).
After looking at this post: http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/I-need-an-Internet-driver-for-Yoga-13-wit.... I figured I would to be provided with the link by someone from Lenovo support.
Here's the hardware ID of the soundcard: HDAUDIO\FUNC_01&VEN_14F1&DEV_506E&SUBSYS_17AAA001&REV_1000. In Windows it is recognized as High Definition Audio (in the device manager).
Thanks a lot for your help.Hello,
From looking at the Yoga 13 Hardware Maintenance Manual and downloading the driver package from the Realtek Wireless LAN & Bluetooth Driver for Microsoft Windows 8 (64-bit) - IdeaPad Yoga 13 page and extracting (but not running) it to look at the contents, it appears the Yoga 13 uses a wireless LAN card based on Realtek RTL8732 chipset.
I would suggest that you try downloading the drivers, expanding, but not installing them on to a USB flash drive or SD card, then plugging that into the Yoga 13, running the Device Manager (filename: DEVMGMT.MSC), clicking on the appropriate entry for the wireless network adapter, selecting update, and then choosing the Browse my computer for driver software option, pointing that to the location of the unpacked drivers. Perhaps Device Manager will find the correct drivers to install that way.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество -
I need the correct driver for an infrared remote control (ENE CIR receiver) for Pavilion DV4-2173nr.
The receiver that came with my notebook is a black model one (see picture below), with the following information in its bottom label:
RC1762302/00
3139 228 50021
HP SPS: 435743-001
HP: HSTNN-PRO7
RC6 ir
CP06 60808 A 146218 REV. B
I never managed to make it work, from the very beginning. I know it is working, because I replaced the battery for a brand new one and it shows a blinking IR LED when I press any button and point it to a digital camera.
Searching for "ENE CIR receiver driver" is useless 'cause I received more than one hundred answers - I tried four of them but none worked so far.
So, instead of trying the whole bunch, I am crying for help - could someone please tell me which driver is the correct one for this remote model?
Thanks in advance and regards,
Mike
P.S.: I am using Windows 7 Ultimate 64-bit and Ubuntu 12.04 in this notebookhttp://ftp.hp.com/pub/softpaq/sp46501-47000/sp46741.exe
File name:
sp46741.exe [1/1, 1.04M]
System requirements:
No additional prerequisites
Released:
2009-12-31
Version:
2.7.4.0 A
Compatibility:
Microsoft Windows 7 (32-bit), Microsoft Windows 7 (64-bit)
Fix/Enhancement:
Original Software/Drivers -
NEED windows 8 driver for MSI fx400 plisss
I need windows 8 driver for msi fx-400 because MSI TDE technology, MSI GPU Boost technology, my power up, camera, and bluetooth not work, plisss i need it thanks
Quote from: flobelix on 17-January-13, 02:40:21
FX400 is not among the notebooks verified to work with Win8 (http://event.msi.com/2012/windows8/index.html). Therefor MSI won't provide any drivers or support for using Win 8 on this computer. -
Can not fine external hard drive for time machine sence lion was installed
I can not fine external hard drive for time machine sence lion was installed, it don't reconise it at all.
I have a Mac Mini (late 2009) and I have an iomega 1TB external hard drive connected to my mini via firewire and usb (usb allows me to use the usb ports on the external 1TB drive to daisy chain other devices). Since I installed Lion, my Time Machine and this 1TB drive (and its partitions) is finicky. Sometimes it is mounted and sometimes it is not. This issue has only surfaced post Snow Leopard and in the Lion era. I am not the first to say this but the whole reason I went Mac was b/c of Vista. I am beginning to think that Lion is the new Vista. Sorry for the latter, just venting... b/c this ain't the first issue with Lion.
Maybe you are looking for
-
HT4314 Can I transfer Game Center data stored in one Apple ID to a new Apple ID?
My son signed up for Game Center with my Apple ID last year. All of his game data is saved in my account. He now has his own different Apple ID. I would like to transfer his data out of my account into his account so that his iPod needs no access
-
I am trying to get my airport connection to work using OS9. I believe that the model is an iMac DV 400. I partitioned the hard drive into two partitions. One partition has OS X on it using tiger (10.4.10). With that partition, I have successfully got
-
Can't See Form Fields in Acrobat 9
I created a form using the wizard. When I went in to create additional fields in the form field editor all the fields were gone and each field I added disappeared as well. My OS is 32 bit Windows 7 Pro. Everything is patched up to current levels. Som
-
I have a question about placing new war files in production. First, why does WebLogic recommend AGAINST using auto-deploy in production? Is it for security or stability and what are those arguements? Second, do I need to move the actual war file to t
-
Some photo images downloaded to a desktop file, won't open
I get a permissions error saying I don't have permission to open it. I don't know if that is a setting on my computer or the way we are downloading/saving the image. The web site, has no restrictions of permission they say.