Need Sceptre TV Remote Control code(s) that work with VZ P265v3RC -- the '335' code does NOT

Recently upgraded my TV's in my house with new Sceptre 40" and 50" TV's - thank you WalMart. Purchased in September 2014. (new / current Sceptre TVs).
All of the Verizon printed, online, and other documentation for the P265V3 RC (model RC2655005/01B) for Sceptre shows to use code '335'.   I have tried the '335' code on both of the TV's and no worky at all. 
Following the 'Quick Setup Guide-Verizon FIOS remote' steps (paper/PDF instructions with RC Manual):
I can successfully enter the '335' code as outlned in step 4... and 'The RED LED will blink twice and then stay on'. occurs.  So far, so good.
Step 5 states, "5. Press and release the <CH +> button repeatedly until the TV turns off......."   This happens perfectly... I can press the <CH+>> button a few times, and indeed, my TV turns off.
Now, onto Step 6: "Test that the remote control is programmed for your TV".....  can't get Mute, A/V, other keys to activate /. be recognized - even though I'm followijng "press and hold that key. Release it as soon as it works"
Does anyone have a working code for Sceptre TV's ??? The Verizon '335' code doesn't work for me.
 I need the 'best code' anyone has found that works with new Sceptre TV's.... the 335 code that VZ recommends... no worky.

Robertop,
have you tried the following? The info below  is found here
Turn on your TV and the FiOS TV Set-Top Box.
Make sure you can see live TV.
Press and hold the OK and FiOS TV buttons together then release both buttons.
The red LED light blinks 2 times and then stays on.
Press and hold the Play button.
The remote control tries a new TV code every second.
The red LED light blinks each time a new code is sent.
When the TV turns off, release the Play button immediately.
NOTE: Some TVs may respond slower than others. If necessary, you can press the Ch+ and Ch- buttons to go forward or backward one TV code at a time.
Test your remote to ensure it is working properly:
- Turn on the TV by pressing the TV button on your FiOS TV remote.
- Press the Vol+ and Vol- buttons to ensure that you can control the volume.
- Press the Mute and A/V buttons to ensure they work.
If any of these buttons do not work, press and hold that button. Release the button as soon as it works.
If all the buttons work, press OK to this TV remote code.
The red LED light blinks 3 times and then turns off. Your remote control is now programmed.

Similar Messages

  • HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

    my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

    There is a hardware problem.  Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

  • I can't get my password manager working. It remembers passwords for websites but when I enter in a new password (because this had to be changed) or when I have a new username + PW that I wish to save, the password manager does not appear.

    I can't get my password manager working. It remembers passwords for websites but when I enter in a new password (because this had to be changed) or when I have a new username + PW that I wish to save, the password manager does not appear.

    If you updated your existing account then try logging out of it on the iPhone by tapping on the id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on the iPad.
    If you created a new account then you can log out of the old account and in with the new one as above, but any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can re-download its content and download updates to its apps.

  • I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7

    I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7. Surely there is software that will allow older scanners to work on OS10.7. My MacBook Pro runs 10.6 and the

    Although the HP Scanjet shows up in the system profile for the computer it is generic and is not configured (as in screen shot).  It also does not show up in the ;ist of pritnters, scanner when I open Image Capture.  I can't load the software that came with the printer because it is out of date so that would make it impossible to configure the scanner on the new iMac. see below:  Too bad there isn't some generic profile I could load that would cover the 5550c. I have a new all in one printer-fax-scanner but the old one can scann in slides and negatives which I have.

  • WARNING: Any laptop that comes with an *automatic* switching Radeon 6770m does not support OpenGL.

    WARNING: HP has falsely advertised their dv6 and dv7 line. Any laptop that comes with an *automatic* switching Radeon 6770m does not support OpenGL and various other software. OpenGL games, Adobe CS Suit, and Design programs such as CAD or MatLab are incompatible with this laptop!

    According to this post the 6670m does fully support open GL 4.1
    http://forum.notebookreview.com/hp-pavilion-notebooks/583203-dv6t-7-switchable-graphics-76.html#post...
    And AMD says it does also
    http://www.amd.com/us/products/notebook/graphics/amd-radeon-6000m/amd-radeon-6700m-6600m/Pages/amd-r...

  • HT2513 I have a message that I cannot eliminate. "The Anniversary calendar does not support events". I cannot find any event associated with the anniversary calendar. In fact I have deleted the anniversaries from my calendar. any ideas?y

    I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?

    I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?

  • Button wont work with Text in the way, code to ignore text?

    Hey, I'm createing a menu but the text on button stops button animation on click, is there code to ignore the text? I dont want to have to create a new graphic for every button I've tried grouping but that didnt help please help me!! (Awesome product btw Adobe, love you long time)
    Emma

    Yeah I thought of that, just the animation is inside the button symbol and the text is outside. I have heaps of instances of the same button, so if I put the text inside the symbol for button obviously it will go on every instance.
    How would I code an invisible button to play inside the button symbol from the main timeline? Sorry been a long time since I was coding in flash, lol and very new to edge, guess cos it's new... lol
    So I would have the invisible area to click on the main timeline and I would want to code that to play the timeline inside the button symbol. Hopefully that makes sense.

  • I need to find a powered usb hub that works with my Macbook pro

    I've got a macbook pro mid 2010. And 2 usb ports isn't enough. Even with the powered hubs taht I have tried none will seem to charge my ipad 2. It only works if it is plugged directly in to the Macbook. So is there a powered usb hub out there that can handle having an ipod and and ipad plugged into them and actually charge these devices. Thanks in advance.

    Yes. Google...

  • I put itunes on my ipad in NZ and still have credit left but its only 72 cent and i cant buy anything with that. then i moved to aussie and bought itunes now that i try to load the itunes it does not work. it says i have to use the last credit but i cant

    please help!!

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • My new earpods that came with my new iPod Touch 5 does not plug in?

    My NEW earpods do not plug in all the way! There is static when I plug it in! It won't let menplug it in all the way no matter how hard I pushed. When I plug it in (as far as it goes) all I hear is static! And then it stops. But sometimes it works but then the sound starts to go out from the speakers.

    Definitely sounds like a hardware problem, probably with the jack.  Set up an appontment at the the Genius bar of the Apple Store.

  • Is there a digital notepad that works with the ipad

    i got my ipad 2 recently but i dont like writing notes on it. i was looking for a digital notepad that you write on paper and it shows up on ipad just like a normal note. ive found the notepads, but i cant find one that works with ipad. please help

    You can speak & make notes. Get Dragon Dictation app.
     Cheers, Tom

  • Is any way search REMOTE VIEW of a web folder(files on server), the source code(all soite search) fo

    Is any way search REMOTE VIEW of a web folder(files on server), the source code(all soite search) for a word eg an email address? how?
    I must await a lot to finish?

    I search all Local View (site) for forms submitted to [email protected] and deleted that email although I still get SPAM(Nothing in body) emails sent to:
    [email protected]; [email protected]  (to both in TO field)
    first is the normal address left no need deleted, the yahoo address deleted.... well where this form processor located and get spam[PHP Site]...???
    I run SELECT NEWER IN REMOTE SITE
    But nothing selected, well?

  • When the apple review team review our app,they point out that our  app uses a background mode but does not include functionality that requires that mode to run persistently.but in fact,when the app in background ,the app need data update to make the

    when the apple review team review our app，they point out that our  app uses a background mode but does not include functionality that requires that mode to run persistently。but in fact，when the app in background ，the app need data update to make the function of  trajectory replay come ture。in fact， we have added function when the app  is in background mode。we have point out the point to them by email。but they still have question on the background mode，we are confused，does anyone can help me，i still don't know why do review team can't find the data update when  the app is in background and how do i modify the app，or what is the really problem they refered，do i misunderstand them？
    the blow is the content of the review team email：
    We found that your app uses a background mode but does not include functionality that requires that mode to run persistently. This behavior is not in compliance with the App Store Review Guidelines.
    We noticed your app declares support for location in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location.
    It would be appropriate to add features that require persistent use of real-time location updates while the app is in the background or remove the "location" setting from the UIBackgroundModes key. If your application does not require persistent, real-time location updates, we recommend using the significant-change location service or the region monitoring location service.
    For more information on these options, please see the "Starting the Significant-Change Location Service" and "Monitoring Shape-Based Regions" sections in the Location Awareness Programming Guide.
    If you choose to add features that use the Location Background Mode, please include the following battery use disclaimer in your Application Description:
    "Continued use of GPS running in the background can dramatically decrease battery life."
    Additionally, at your earliest opportunity, please review the following question/s and provide as detailed information as you can in response. The more information you can provide upfront, the sooner we can complete your review.
    We are unable to access the app in use in "http://www.wayding.com/waydingweb/article/12/139". Please provide us a valid demo video to show your app in use.
    For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
    - complete details of your rejection issue(s)
    - screenshots
    - steps to reproduce the issue(s)
    - symbolicated crash logs - if your issue results in a crash log
    If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.

    Unfortunately, these forums here are all user to user; you might try the developer forums or get in touch with the team that you are working with.

  • I successfully reinstalled iWork, then got a msg that I needed to contact developer to be sure it works with my version -- which is 10.7.4

    I successfully reinstalled iWork, then got a msg that I needed to contact developer to be sure it works with my version -- which is 10.7.4

    tHi, I'm getting there -- but want to check to be sure the "Run" button got the results expected:
    The last part of the  "Run" log says:
    ry to remove the apps bought from the Mac App Store :
    "<startupVolume>:Users:<userAccount>:Applications:Keynote.app "
    "<startupVolume>:Users:<userAccount>:Applications:Numbers.app "
    "<startupVolume>:Users:<userAccount>:Applications:Pages.app "
    set dossier_des_fichiers to path to applications folder from user domain as Unicode text
    set liste_de_fichiers to {"Keynote.app", "Numbers.app", "Pages.app"}
    tell application "System Events"
        repeat with un_fichier in liste_de_fichiers
            try
                delete disk item (dossier_des_fichiers & un_fichier)
            end try
        end repeat
    end tell
    --[/SCRIPT]
    --{code}
    Do you think "end try" and "end repeat" mean it was a successful undertaking?
    If not, could I use MacKeeper to perform the same function?
    I

  • I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out wh

    I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.

    Hi olivias,
    It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
    How to change the default application for a file type | Macworld
    http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
    Please let us know if you have additional questions.
    Best,
    Sara

Maybe you are looking for