Need SEM - BPS Material and Guidance

Hi all,
Iam new to SEM-BPS.If u had any material/documentation,FAQ's regarding SEM-BPS pls send to <b>[email protected]</b>
I would appreciate,if some one guide or helps me.
Regards,
Nayanasri.

Hello All,
BPS is currently very well documented on SAP's help website which is entirely free and does not require a login or anything of that kind. I highly recommend taking a look at this when you get an opportunity to do so.
http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Look under the Business Planning tab and right below the information about Integrated Planning there is a ton of information on BW-BPS.
Hope this helps.
Cheers,
Scott

Similar Messages

SEM BPS material

I am new SEM BPS, please send me the documents for that.
Quick response will be appreciated with points.
My Email Id is [email protected]
And please can somebody share whts the work related to SAP BW as i am BW consultant.
Thanks and Regards
habeeb

hi,
please refer to this sap help.
http://help.sap.com/saphelp_nw04/helpdata/en/05/242537cedf2056e10000009b38f936/content.htm
hope it helps,
regards,
Parth.

SEM BPS Documentation

Hi Gurus,
I am new to BW, and SEM BPS. Please can provide some documentation on SEM BPS which gives some kind of basic ideas and Best Practice.
Thanks in advans...
Regds
Sam

Hi,
following one will be useful for you..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/s-u/sap%20bw%20business%20planning%20and%20simulation%20-%20how%20to%20guides%20list.htm
Also kindly send an email to [email protected]
. I read in one of the forums (Need SEM - BPS Material and Guidance) that he is currently working in SEM-BPS. He should ne able to hel you a lot in this regard.....
Good Luck!!!
Thanks,
Raj

SEM - BPS any docs ?

Hello SDNs,
How ya all ?
One of my friend requires the DOC related to SEM - BPS. Glad if someone sends.
Best Regards....
Sankar Kumar
+91 98403 47141

check this link from sap help portal for initial understanding on what functionalities SEM offers .
http://help.sap.com/saphelp_sem350bw/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
You can check this link from the service portal too.
https://websmp202.sap-ag.de/sem
The link has all "How-to" guides on SEM-BPS
Refer to this link:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/s-u/sap bw business planning and simulation - how to guides list.htm
You can start with the Best practice scenario, a good step by step document.
http://help.sap.com/bp_biv235/BI_EN/html/BW/CostCtrPlan.htm
Alongwith this the SEM BPS help is a good document at help.sap.com
If needed refer to the how to guides at the below link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/s-u/sap bw business planning and simulation - how to guides list.htm
look at these links
Need SEM - BPS Material and Guidance
bps material
BPS material required
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/650ee690-0201-0010-4bb7-83c3e2a74039
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7939990-0201-0010-ad83-c78402c859e3
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a289d590-0201-0010-a1ac-bf5cc3463896

Reg:SEM BPS

Hi,
We have the Scenario that For General Price Reduction GPR we are maintaining 12% in r/3 that will be replicated to CRM table from there it ll be updated to ODS101 thyen to ODS201 then In CRM users create TA for the product then system picks GPR from ODS201 but its picking 145.7% can aniy one tell how its picking that vale.
Regards
Pavan

Hi,
links other than help.sap.com
http://www.sap.com/solutions/business-suite/erp/sapsem.epx
http://www.training-classes.com/course_hierarchy/courses/6833_SAP_CRM_BW_SEM_FI_CO__ABAP_Training_in_Atlanta.php
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci974470,00.html
http://www.amazon.com/gp/product/3540228063/102-4764405-1943337?v=glance&n=283155
check this link from sap help portal for initial understanding on what functionalities SEM offers .
http://help.sap.com/saphelp_sem350bw/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
You can check this link from the service portal too.
https://websmp202.sap-ag.de/sem
The link has all "How-to" guides on SEM-BPS
Refer to this link:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/s-u/sap bw business planning and simulation - how to guides list.htm
You can start with the Best practice scenario, a good step by step document.
http://help.sap.com/bp_biv235/BI_EN/html/BW/CostCtrPlan.htm
Alongwith this the SEM BPS help is a good document at help.sap.com
If needed refer to the how to guides at the below link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/s-u/sap bw business planning and simulation - how to guides list.htm
look at these links
Need SEM - BPS Material and Guidance
bps material
BPS material required
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/650ee690-0201-0010-4bb7-83c3e2a74039
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7939990-0201-0010-ad83-c78402c859e3
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a289d590-0201-0010-a1ac-bf5cc3463896

Changes are not reflected into SEM-BPS 1 layout.

Hi,
1st, I've included code in SAPAfterDataPut that copies data from SEM-BPS 1 into New Sheet.
Now, I've inserted a method in the sheet module of New Sheet. This method takes care of reflecting changes from New Sheet into SEM-BPS 1 layout. but, finally am not getting changes back to SEM-BPS 1 sheet.
I've tested this in excel (outside of BPS) and it works fine.
in BPS, I went into VB debugging mode (after inserting a break point) and I can see that change that has been made in New Sheet was reflected back to SEM-BPS 1. But, when i test the same out of debugging mode, am not getting the same result.
Looks like,after changes in New Sheet, SAPAfterDataPut is again being executed and is overwriting the changes that I made in new sheet.
Do i need to inlclude code only in SAPBeforeDataPut to reflect changes from new Sheet into SEM-BPS 1?
In excel (outside of BPS), this method works in such a way that, as soon as i make changes in Sheet2 will get reflected into Sheet1 without runnning any macro.
but, with same code, this doesn't work in BPS. (instead of reflecting changes to SEM-BPS 1, changed value in New Sheet is reverted back to original value that is same as the value in SEM-BPS 1)
Appreciate any ideas/thoughts on this.

Hi,
Usually you work with a second sheet in the following way: write a macro that copies the data from the SEM-BPS 1 sheet to the new sheet. In order to run that macro include it into the macro "SAPAfterDataPut" and set the flag in the check box of in the popup of the third screen of the layout builder. The system will call the macro after the data has been written to the sheet SEM-BPS 1.
There is a second predefined macro that the system will executed provided that the flag is set on the popup in the layout builder. This macro is called "SAPBeforeDataGet". It is called before the BPS reads data from the SEM-BPS 1 and should be used for transferring the data back to the first screen (similar to the coding you have done in SAPAfterDataPut). Using this macro should solve your problem.
I did not understand how the changes are transferred from the new sheet in your (stand alone) case. Unfortunately it sometimes does make a difference if you test a macro in a stand alone Excel or in the Excel inplace. Some features are disabled in Excel Inplace (by Microsoft!!).
Best regards,
Gerd Schoeffl
SAPNetWeaver RIG BI EMEA

Help with BW/SEM-BPS

Hello Folks,
I am new to BW-BPS.
If you had any material/documentation(BW370 or BW380),FAQ's regarding BW/SEM-BPS can you please send to [email protected]
I would appreciate any help.
Thanks,

Hi,
As u r new to BW, I hope the following links ll be useful to u
go to https://websmp103.sap-ag.de/bi
-> SAP BW 3.5 -> SAP BW Business Planning and Simulation
Here you can find "HOW TO... Guides - BPS", "SEM-BPS ASAP" and other useful section with many documents...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ae9fba90-0201-0010-d490-cbf9a364de95
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/d-f/enhancements bw-bps formerly sem-bps in sapnetweaver 04.ppt
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/d-f/frequently asked questions - planning with sap netweaver bi.faq#q-6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d90209f-0501-0010-59a2-9243ac94a4d7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/s-u/sap bw business planning and simulation - how to guides list.htm
http://help.sap.com/saphelp_sem40bw/helpdata/en/05/242537cedf2056e10000009b38f936/frameset.htm
Hope it helps...let me know
Regards,
R.Ravi

SEM-BPS-BCS

hi all i am bw cunsultant and now i am coming into SEM bcs-bps can someone help me out how should i start to learn.
if someone has the documnets please send to me
[email protected]
i shall then very thank full for you

Hi Sanjeev,
go to https://websmp103.sap-ag.de/bi -> SAP BW 3.5 -> SAP BW Business Planning and Simulation
Here you can find "HOW TO... Guides - BPS", "SEM-BPS ASAP" and other useful section with many documents...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ae9fba90-0201-0010-d490-cbf9a364de95
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/d-f/enhancements%20bw-bps%20formerly%20sem-bps%20in%20sapnetweaver%2004.ppt
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/d-f/frequently%20asked%20questions%20-%20planning%20with%20sap%20netweaver%20bi.faq#q-6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d90209f-0501-0010-59a2-9243ac94a4d7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/s-u/sap%20bw%20business%20planning%20and%20simulation%20-%20how%20to%20guides%20list.htm
http://help.sap.com/saphelp_sem40bw/helpdata/en/05/242537cedf2056e10000009b38f936/frameset.htm
Regards,
R.Ravi

Any send is-retail material and transaction codes

Hi,
i am new to is-retail. i need is-retail material and transaction codes.
1.how can i found article hierarchy?
2.transaction code for article creation?
3.transaction for country, zone, state, city, store, concepts?
4.transaction code for product category?
Regards,
venkat.

Please look at
Master Data in SAP Retail: Some deep hints
Regards
B

BW SEM-BPS implemetation

I am involved in new SEM-BPS implementation and I have to develop an interface program to read csv ( flat file ) from from a server into BW for reconciliation in BPS. I am new in BW, please can you tell me the best approach with examples if possible on how to develop the interface.
Also can I read data from Infocub into an internal workarea for me to apply a validation on them in the process of elimenating invalid record. Thank you for your help.

There are many ways to do this and it is very hard to give an example. There are resources out there to help. Here are a couple function module names that may help UPLOAD_FILES or DBAN_GET_FILE_CSV. I personally have always been a fan of loading it into an ODS and doing comparisons there. They give you the functionality to upload CSV using a data package. That does depend on how many rows you are loading.

Production for semi finished material

Dear gurus,
i had a scenario where semi finished material is combination of different batches,for production of semi finished material i had 6 operations in which up to 3rd operation i have 3 production lines in which each batch in the line is identified by different batch no and in 4th operation all batches are mixed and if new batch is coming into 4th operation the material which is already in 4th operation enters 5th&6th operation continously for semi finished material and enters remaining operations for finished material production .semifinished material is not stored in any place it is continously flow from 6th operation which is semi finished material to another operation which is used for producing finished material.
suppose for week i require 100 m3 of finished material , and for each batch i can produce 2 m3 in each production line ,i require 50 batches for week .the production is continous .
can i follow by creating 50 production orders each of different batch ,by creating semi finished material in 4th operation , can any one please suggest .
Thanks

Hi Jitendra,
Checking Control (OPJJ) has no relation with MRP.It is useful in the case of Plan and Production / Process Order only to find out Missing part.
Now come to MRP again.
You have a choice of only 3 type of stocks to include or exclude them during MRP run while rest of the things like (PO,PR,Reservation etc are consider by default)
Go to OPPQ and after selecting Plant go to Available Stock.You will find that options,
- Stock in Transfer
- Block Stock
- Restricted Stock.
And one more thing Reservation is not a available stock but its one kind requirement and if there is no stock then system will activate the Planning file entry and during next MRP run it will generate Planning proposal also.
Regards,
Dhaval

Purchase View for Semi finished Material

Could we activate purchaes view for Semi finished material type..?
we have to do a branch transfer/STO of Semi Finished material and Purchase view is required for STO

Hi
use the Txn OMS2 select the material type HALB and go to the details button (ctrlshiftF2) above, you will find the user department screen showing the details of the views available, selcet the purchasing button in that wondow. Please select the appropriate valoes in the drop down from Internal/External Purchase orders by putting 2 for External Purchase orders and either 2 if it is internally produced or 0 of it is not produced internally. save the arrangement.
Regards

Requesting the relevant links for step-by-step or TAB'S for SEM-BPS

Hello Pro's,
Greetings for all.
I am surendra. I am working as a bw consultant since 2years. Now I want to learn SEM -BPS. i am exploring SDN to learn SEM-BPS, but it is very complicated to understand.
I request you to suggest ease method to learn the sem-bps and also if any materials like step-by-step or TAB'S.
please post the relevant links for step-by-step or TAB'S.
Thanks,
suri

Hi Surendra,
go to https://websmp103.sap-ag.de/bi -> SAP BW 3.5 -> SAP BW Business Planning and Simulation. Here you can find "HOW TO... Guides - BPS", "SEM-BPS ASAP" and other useful section with many documents...
Also check this too
http://help.sap.com/saphelp_sem40bw/helpdata/en/05/242537cedf2056e10000009b38f936/frameset.htm
Regards,
R.Ravi

Looking for SEM-BPs Bw doc's and Traig material

Hi All
Guys please help me for BW BPS Training Material and Doc's
Thanks
Stob

Besides the How-to-Guides available in SDN, you can also refer help.sap.com
Goto SAP Netweaver> Information Integration>BW>BPS
To get a SEM oriented perspective, you can visit service.sap.com/sem; documentation on SEM-BPS is available there
Also, in help.sap.com....... if you go to mySAP ERP ; you can goto SEM and refer the BPS details there
From my experience if you are looking at help while doing hands on ...... help.sap can prove to be a handful
Cheers

BI Integerated planning and SEM-BPS ???

Hi all ,
I am new to SEM.
Could you tell me
1) if there's any difference between Bi integeraed planning and SEM-BPS ?
2) if so, what are those differences ? & which one is better suited to planning needs ?.
3) also can we use planning areas developed in bw-bps ???
Friends if you have any documentation for the practical part of SEM-bps
could you please send it to [email protected]
thanks in advance
Nidhi Dashora

Hello together,
BI-IP is under contruction and wil be replaced later instead of BW-BPS. For the mean time BW-BPS will exist parallel.
Further details see here: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b87271fb-0701-0010-00bd-b03502b8c011
This is the theorie. In the praxis there are big differences and BI-IP is in a "very eraly stage", you should have at least SP 10, better wait for 12 to able to have at least the most important functionalities in BI-IP.
e. g. you can not plan on hierarchy nodes (e. g. you dont have standard distribute function to distribute from # in a query). This is available from SP12. And so on....
regards
Eckhard Lewin

Need SEM - BPS Material and Guidance

Similar Messages

Maybe you are looking for