Need setup help with K7N2 Delta-L

I am having a problem with system hanging up and getting blue screen from time to time.Running msi K7N2 Delta- L board with corsair value select VS1GBKIT400 PC3200 1024MB 2x64Mx64 2x184 DIMM,Leaktek winfast A250 ti4600 video card,antec 350w ps,xp home loaded on 30 gig wd 7200 drive with clean install.Not looking to overclock just want stable setup as about all I do is play with PSP7 and run driving games.Think I do not have bios settings correct as I am still a beginner.Any help or thoughts appriciated.
Thanks Bruce

Bruce: I have the same Delta-L motherboard and it is picky about the Ram. I used Crucial 2 512 sticks 400 and they are in slots 1 and 3. Is it maybe the power supply is a little weak? Seems they like 400 or better PSU.
Wayne

Similar Messages

  • Need serious help with K7N2 Delta!!!

    I just finished building a PC, and no problems had cropped up until my last reboot. I shutdown simply to take a look at a fan controller, but I didn't mess with any wires or anything; I simply looked at it for a sec. Anyway, when I tried to reboot, it wouldn't do it and it still won't.
    It takes about 5 minutes to "Detect IDE drives ...", but eventually detects them all correctly before moving to the next screen... >>
    Right now it's stalled at:
    Verifying DMI Pool Data ...................
    Boot from CD :
    Boot from CD :
    NVIDIA Boot Agent...blah, blah, blah
    PXE-E61: Media test failure, check cable
    PXE-M0F: Exiting NVIDIA Boot Agent.
    DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
    Anyway, I already have WinXP Home installed on it, with tons of progs set up and other stuff worked out. It was pretty much finished except for a few little things I wanted to do to custimize it. I've checked all the cables inside numerous times, and I still can't figure out what is going on.  I've check all cables, jumpers, wires--everything about a hundred times, and even tried to boot from CD only, HDD only...etc...
    Any help would be really appreciated!!!
    Stats: MSI mobo, AMD XP2400 CPU, 512MB DDR333 RAM, 80GB WD HDD, ABIT Videocard (64MB DDR), Lite-On 52x CD-R, Lite-On 16X DVD, Sony Floppy Enermax 350w PSU

    Geez this is getting frustrating. I found the problem and now I am having another.
    The problem appears to be my CD-ROM. I had a CD-ROM and CD-RW on the same IDE channel. As soon as I unplugged the CD-ROM, the problem went away. I can not use the second CD-ROM no matter what IDE channel (1 or 2) or position (Master or Slave). I tried a different CD-ROM drive and it still causes the same problem. Ok, I can live without the drive for now.
    Now I go to reformat my hard drive and I keeping getting a blue screen saying my Bios is not fully ACPI compliant. I flashed up to 5.6. I tried the trick of hitting F5 when Windows set-up asks for SCSI drivers and then selecting ACPI Uniprocessor. That doesn't work.
    Arghhh!!!
    What the hell do I got to do to get this thing to work!!!!

  • Help with K7N2 Delta + Barton 2500+

    Last night I changed my BIOS to 11x210, everything was working fine at 11x200, but now my machine will not boot up, the D-Bracket on my MSI K7N2 Delta shows that there is a problem with the RAM, but the RAM was working fine and after leaving the machine off for sometime it begins to boot up.
    You can hear the drives spin up, the the Graphics card doesn't seem to kick in and the monitor LED remains on Amber.
    I have tried clearing the CMOS with the JBT1 jumper but it doesn't seem to clear, I also removed the CR2032 battery but that also didn't work.
    Please Help
    More information is available

    read the book it eally does help J 10 will force pc into 100 fsb mode
    then you can set it back to 200 and put the jumper back in user mode
    only move the jumper with the pc off and mains power disconnnected

  • Help with k7n2 delta-islr

    I am thinking about purchasing the cyclone bundle from allstarshop.com
    It comes with the msi k7n2 delta-Islr nforce2 ultra 400
    With the athalon xp 2500+ barton
    512 kingston ddr 400 pc3200 cl 2.5
    ati radeon 9500 pro 128k 8x agp.
    I will be running windows xp pro
    Will this all work together seems the msi board has lots of issues?
    Thanks for any help.

    Quote
    Originally posted by ally68
    I am not that concerned with bench marks as I do not play alot to games. I guess what I am asking is the fx cards more compatible also if I do get kingston ddr400 should I get 2 256 stcks or one 512 stick?
    For video the TI4600 would be fine and is more reasonably prices. As far as RAM Kingston is not on the approved list, like I said it may work fine or you may have problems depending on the chipset, but no matter what type of RAM you buy you definetly want to buy 2 X 256MHz so you can run dual channel.
    Rob

  • Help with K7N2 Delta-L install

    I am going to fit a K7N2 Delta-L motherboard next week. I have also ordered the following components.
    xp2000 cpu
    2x256 Crucial pc3200 ram
    MSI FX5200 TD128 graphics.
    I have downloaded and read the manual but I am not clear on what I should set jumpers 10 (fsb mode) & 11 (fsb frequency) to. Also when I start the computer for the first time will I have to set the cpu and memory parameters in the BIOS or will the board aut-detect them.
    A.H.

    nVidia Drivers
    d/l the latest nforce and vga drivers
    just leave jumpers as it comes
    it should auto if not set fsb to 133 ,leave ram alone
    set ddr fsb ratio to 1.1 as well

  • Help with K7N2 Delta mobo

    Got it from my brother the other week.  Found out that the processor was bad so I got a new one and tried to boot it up.  Everything would power up but I did not get a beep or any display on the monitor.  So I removed all the components except for the CPU, heatsink, PSU, and D-bracket.  Still no beep, and the leds for the D-bracket pointed to Memory Detection Test.  I pulled the mobo out of the case and placed it on an anti-static mat and still not getting a beep or display.  I know the CPU works because I tested it on another AMD pc at work.  I am going to test the GPU in another tonight after I get home.  I cleared the CMOS already.  The J10 jumper is set to 133MHz and the J11 is set to 133/166MHz.  Don't know what else to try.  Any suggestions would be greatly appreciated.

    Quote from: Fredrik Åsenius on 24-August-05, 05:00:25
    Yep, the processor seems to be the problem.
    You know of course that the graphics card, ATI ALL-IN-WONDER 9800Pro 128MB 256-bit DDR VIVO AGP 4X/8X, need a special power connection, too.
    http://www.gen-x-pc.com/vg_AIW9800P.htm From the picture it looks like a floppy device power cable.
    And, this doesn't solve your problem, but I think you should wait with any PCI-cards. If you have any, take them out.
    I tried the processor in another AMD machine at work and it was able to boot.  I have the extra power cable for the ATI card plugged in.  I tried booting with nothing on the board except the CPU and the D-link and still not getting a pc beep.

  • Need some help with guitar setup...

    jeez, never thought i'd be asking a question like this after playing for like 20 years, but i need some help with a guitar setup for mac. i'm gonna list out a lot of crap here that prolly doesn't affect anything at all, but here goes.
    Imac 17inch G4 - latest updated OS X... 10.4, or 5, or whatever. garageband 3.0
    digitech gnx-3
    alesis sr-16
    sure mic's
    yamaha e203 keyboard
    here's the setup:
    yamaha is on its own on a usb uno midi interface, sure's connected to gnx's xlr port, alesis connected to gnx's jam-a-long input, '87 kramer vanguard connected to gnx's guitar input. currently running headphones out on gnx to line in on mac.
    here's the problem:
    everything works beautifully, but my guitar sounds like crap. if i plug headphones into the gnx, it sounds beautiful. that makes me think its some kind of level issue between the gnx's output, and the mac's input, but nothing seems to fix it.
    by sounding like crap, i mean way too much bass. sound is muddy, blurry, not crisp... aka crap. i've tried altering both output and input on mac and gnx, and i cant get a combination that works. the gnx has a s/pdif out, can the mac accept that as input? might that help? short of running the gnx to my marshal half stack and mic'ing that, anyone have any suggestions, or use a similar setup?
    any help would be greatly appreciated!

    anyone? ... any suggestions? I think it might be an issue with the gnx pre-amping the signal as it goes out, and then the mac amping it on the way in, giving me a buttload more signal than i need, but since i cant find a happy level, i'm not really sure. i really dont want to resort to mic'ing my marshall... even with the volume almost off, my jcm900 is WAY too loud for apartment use. its not like i really NEED the guitar to sound perfect, i only use garageband to sketch out ideas for songs between myself and bandmates, but its really annoying to not have my customary crisp distortion. my bass player keeps telling me to use the built in amps, but, not to dis a practically free program, but the built in amps blow, at least after 10 years of marshall tube amplification they do. if anyone has any suggestions that might be helpfull on how i might resolve this, i would be your best friend for life and go to all your birthday parties

  • Need some help with region position

    Hi,
    I need som help with regions position....
    Background:
    I have 2 regions, I will call them reg1, reg2 and reg3.
    reg1 = Page Template Body (2. items below region content), column 1, search region.
    reg2 = Page Template Body (2. items below region content), column 2, import file region.
    reg3 = Page Template Body (3. items above region content), column 1, search result, grid region, very wide.
    Issue with the position, the setup explained makes my layout like this
    reg1--------------------------------reg2
    ------------------reg3--------------------
    What I want:
    reg1-reg2
    ------------------reg3--------------------
    What am I doing wrong?
    Regards Daniel

    Daniel,
    this will also work:
    Region1 HTML table cell attributes
    width="10%"
    Region2 HTML table cell attributes
    align="left"
    without touching the page template.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://htmldb.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

  • Kingston, Crucial, Twinmos memory has problem with K7N2-DELTA??

    I need 2*256MB memory for my AMD 2500+XP.
    Kingston, Crucial, Twinmos memory seem to have problem with K7N2-DELTA-ILSR
    Is Samsung good?
    Please do me a favor to choose one brand that fit my mobo in this link:
    http://www.canadacomputers.com/memory.html
    I tried KingMax(SuperRam Series, since they don't have the ram with the model listed in the test report) and Corsair(CMX256A-3200C2) ,both no good for 2*256MB DUAL channel
    Thank you very much

    I think OCZ and Samsung, is mostly work memory,r ight?
    thx
    I think I will try OCZ

  • Serius problem with k7n2 delta 2

    I have problems with my k7n2 delta2 does not recognize a AtlonXP 3000+ was working in this plate, doing tests of overclock,when to restart do not work the processor in this plate but,the motherboard (k7n2 delta 2) works with other processors, and processor 3000+ works with other motherboards, but Athlon 3000+ with k7n2 delta 2 does not work together, I tested of everything recover the bios, to update the bios and nothing, dont change to default, I hope that can help me beforehand thankful.
    tengo problemas con mi k7n2 delta2 no reconoce  un AtlonXP 3000+ que ya estaba trabajando en esta placa madre, haciendo pruebas de overclock, y despues de reiniciarla ya no quiso reconocer el procesador athlon xp 3000+, la placa madre (k7n2 delta 2) trabaja con otros procesadores, y el procesador 3000+ trabaja con otras placas madres, pero el Athlon 3000+ con k7n2 delta 2 no trabajan juntos, ya he probado de todo restaurar el bios, actualizar el bios y nada, parece que no efectua los cambios a default, no se que hacer, espero que me puedan ayudar agradecido de antemano.
    cuando tiene otro cpu enciende correctamente pero cuando le pongo el xp 3000+ no enciende el monitor ni marca ningun error solo no inicias, pero si enciende.      

    Why do you say Bios doesn't go to default options if with other CPUs Mobo turns on ? You must have in mind that each time you replace the CPU you must Clear CMOS to return to default options, and also you should clean HSF base and CPU die from old thermal grease. At least you know both CPU and Mobo works.
    Por qué dices que la Bios no vuelve a las opciones por defecto si la tarjeta madre funciona con otros procesadores ? Debes tener en cuenta que cada vez que cambias de CPU deberías borrar las opciones que entraste en la Bios como también limpiar la base del disipador de temperatura de la CPU y la CPU misma y usar nueva pasta térmica. Al menos sabes que tanto la CPU como la tarjeta madre trabajan.

  • I'm suddenly in need of help with my Firefox browser (6.0.2)

    Hi there,
    I'm suddenly in need of help with my Firefox browser (6.0.2)
    (OS: I use Windows XP).
    When I open up the browser, all I see is a completely blank white screen, with all the toolbars at the top.
    I know that my physical connections are fine: I've tested the modem, turned the pc off and on etc. and I can also receive/send emails.
    This problem started today, 8th September, 2011 and has never happened before.
    Is it a coincidence that Firefox updated itself just before I logged off yesterday evening? Could it be something to do with this particular new update?
    I've also noted that just before I "open up" Firefox, I now get a small box saying:
    [JAVASCRIPT APPLICATION]
    Exc In Ev handl: TypeError: This oRoot.enable is not a function
    This has never appeared before - I hope it offers a clue a to what is wrong.
    The Browser is not stuck in Safe Mode, by the way.
    Obviously, I can't search for any solutions to the problem on the internet, as I can't physically see any websites!
    (A friend is sending this query on my behalf from their pc)
    Any light you could throw on this confusing problem would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.
    If the only option is to uninstall Firefox and reinstall it from your site, then I'm also in trouble (I can't see the internet or make any downloads).
    In that case, would you be able to send the .exe file as an attachment to my email address? If so, please let me know and I'll give you further details.
    Many thanks in advance.

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    * https://support.mozilla.com/kb/Server+not+found
    * https://support.mozilla.com/kb/Firewalls
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • I need your help with a decision to use iPhoto.  I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them.  I have used ProShow Gold to create slideshows.  I am comfortable with my

    I need your help with a decision to use iPhoto.  I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them.  I have used ProShow Gold to create slideshows.  I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years.  Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge.  180GB plus.
    I now have a Macbook Pro and will add an iMac when the new models arrive.  For my photos, I want to stay with Photoshop which also gives me the Bridge.  The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows.  What am I missing and is using iPhoto worth the effort?
    If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient.  If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward.  However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto.  In the past, I have experienced syncing problems with, and database errors in, large databases.  If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
    Some guidance and insight would be appreciated.  I have a number of Faces questions which I will save for later. 

    Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
    Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
    Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
    For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
    Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
    The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
    Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
    The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
    Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
    When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
    These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
    So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
    So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

  • I've just came on board from Andriod and need massive help with the Contacts application any one out there willing to help the 'noob'?

    I had the folks at the store port over all of my contacts from my old
    ratty Andriod phone to my new shiny iPhone.
    however all 200+ of my contacts sort of "shook" out,
    meaning say John Smith, on my old phone,
    had in my contacts the following:
    John Smith
    123 Main St. Anytown, Anystate USA
    555-826-4879 home
    555-799-4247 cell
    [email protected]
    johnsmith@facebook
    all nice and neat on my andriod but when it ported over
    all that information was just scattered all over my contacts sort of like:
    john smith, smith john
    john smith 123 main st. etc.
    johhn smith home 555 etc.
    john smith cell 555 etc.
    john smith johnsmith@ etc.
    etc.
    so for all those 200+ contacts in my phone, I've got a zillion of them now...
    so I'd like to get this all back in order before I and Siri explode.
    I know nothing, and I know even less about outlook and the sort.
    But I do know I am in Dire need of help with this... I figured that eveything else
    involving iphones and apple in general was supposed to be cake but it seems
    like this is the only thing that isn't cake at all... unless, I'm just a right idiot. (which is possible, hence spelling and grammatical issues).

    I believe I've tried to sync it with google, but it didn't seem to take
    muchless take my calender. it seems to favor my facebook calender
    more over my google calender, but Siri seems to be helping me re-write
    it...but that's not the game here, it's the contacts. I've tried to export
    the cvp (??) list and import it into my iTunes account. However, It only
    doubled my issue because it didn't over write my existing contacts.

  • Please I need some help with a table

    Hi All
    I need some help with a table.
    My table needs to hold prices that the user can update.
    Also has a total of the column.
    my question is if the user adds in a new price how can i pick up the value they have just entered and then add it to the total which will be the last row in the table?
    I have a loop that gets all the values of the column, so I can get the total but it is when the user adds in a new value that I need some help with.
    I have tried using but as I need to set the toal with something like total
        totalTable.setValueAt(total, totalTable.getRowCount()-1,1); I end up with an infinite loop.
    Can any one please advise on some way I can get this to work ?
    Thanks for reading
    Craig

    Hi there camickr
    thanks for the help the other day
    this is my full code....
    package printing;
    import java.awt.*;
    import java.awt.event.*;
    import java.awt.print.*;
    import javax.swing.*;
    import javax.swing.table.*;
    import java.text.DecimalFormat;
    public class tablePanel
        extends JDialog  implements Printable {
      BorderLayout borderLayout1 = new BorderLayout();
      private boolean printing = false;
      private Dialog1 dialog;
      JPanel jPanel = new JPanel();
      JTable table;
      JScrollPane scrollPane1 = new JScrollPane();
      DefaultTableModel model;
      private String[] columnNames = {
      private Object[][] data;
      private String selectTotal;
      private double total;
      public tablePanel(Dialog1 dp) {
        dp = dialog;
        try {
          jbInit();
        catch (Exception exception) {
          exception.printStackTrace();
      public tablePanel() {
        try {
          jbInit();
        catch (Exception exception) {
          exception.printStackTrace();
      private void jbInit() throws Exception {
        jPanel.setLayout(borderLayout1);
        scrollPane1.setBounds(new Rectangle(260, 168, 0, 0));
        this.add(jPanel);
        jPanel.add(scrollPane1, java.awt.BorderLayout.CENTER);
        scrollPane1.getViewport().add(table);
        jPanel.setOpaque(true);
        newTable();
        addToModel();
        addRows();
        setTotal();
    public static void main(String[] args) {
      tablePanel tablePanel = new  tablePanel();
      tablePanel.pack();
      tablePanel.setVisible(true);
    public void setTotal() {
      total = 0;
      int i = table.getRowCount();
      for (i = 0; i < table.getRowCount(); i++) {
        String name = (String) table.getValueAt(i, 1);
        if (!"".equals(name)) {
          if (i != table.getRowCount() - 1) {
            double dt = Double.parseDouble(name);
            total = total + dt;
      String str = Double.toString(total);
      table.setValueAt(str, table.getRowCount() - 1, 1);
      super.repaint();
      public void newTable() {
        model = new DefaultTableModel(data, columnNames) {
        table = new JTable() {
          public Component prepareRenderer(TableCellRenderer renderer,
                                           int row, int col) {
            Component c = super.prepareRenderer(renderer, row, col);
            if (printing) {
              c.setBackground(getBackground());
            else {
              if (row % 2 == 1 && !isCellSelected(row, col)) {
                c.setBackground(getBackground());
              else {
                c.setBackground(new Color(227, 239, 250));
              if (isCellSelected(row, col)) {
                c.setBackground(new Color(190, 220, 250));
            return c;
        table.addMouseListener(new MouseAdapter() {
          public void mouseClicked(MouseEvent e) {
            if (e.getClickCount() == 2) {
            if (e.getClickCount() == 1) {
              if (table.getSelectedColumn() == 1) {
       table.setTableHeader(null);
        table.setModel(model);
        scrollPane1.getViewport().add(table);
        table.getColumnModel().getColumn(1).setCellRenderer(new TableRenderDollar());
      public void addToModel() {
        Object[] data = {
            "Price", "5800"};
        model.addRow(data);
      public void addRows() {
        int rows = 20;
        for (int i = 0; i < rows; i++) {
          Object[] data = {
          model.addRow(data);
      public void printOut() {
        PrinterJob pj = PrinterJob.getPrinterJob();
        pj.setPrintable(tablePanel.this);
        pj.printDialog();
        try {
          pj.print();
        catch (Exception PrintException) {}
      public int print(Graphics g, PageFormat pageFormat, int pageIndex) throws PrinterException {
        Graphics2D g2 = (Graphics2D) g;
        g2.setColor(Color.black);
        int fontHeight = g2.getFontMetrics().getHeight();
        int fontDesent = g2.getFontMetrics().getDescent();
        //leave room for page number
        double pageHeight = pageFormat.getImageableHeight() - fontHeight;
        double pageWidth =  pageFormat.getImageableWidth();
        double tableWidth = (double) table.getColumnModel().getTotalColumnWidth();
        double scale = 1;
        if (tableWidth >= pageWidth) {
          scale = pageWidth / tableWidth;
        double headerHeightOnPage = 16.0;
        //double headerHeightOnPage = table.getTableHeader().getHeight() * scale;
        //System.out.println("this is the hedder heigth   " + headerHeightOnPage);
        double tableWidthOnPage = tableWidth * scale;
        double oneRowHeight = (table.getRowHeight() +  table.getRowMargin()) * scale;
        int numRowsOnAPage = (int) ( (pageHeight - headerHeightOnPage) / oneRowHeight);
        double pageHeightForTable = oneRowHeight *numRowsOnAPage;
        int totalNumPages = (int) Math.ceil( ( (double) table.getRowCount()) / numRowsOnAPage);
        if (pageIndex >= totalNumPages) {
          return NO_SUCH_PAGE;
        g2.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
    //bottom center
        g2.drawString("Page: " + (pageIndex + 1 + " of " + totalNumPages),  (int) pageWidth / 2 - 35, (int) (pageHeight + fontHeight - fontDesent));
        g2.translate(0f, headerHeightOnPage);
        g2.translate(0f, -pageIndex * pageHeightForTable);
        //If this piece of the table is smaller
        //than the size available,
        //clip to the appropriate bounds.
        if (pageIndex + 1 == totalNumPages) {
          int lastRowPrinted =
              numRowsOnAPage * pageIndex;
          int numRowsLeft =
              table.getRowCount()
              - lastRowPrinted;
          g2.setClip(0,
                     (int) (pageHeightForTable * pageIndex),
                     (int) Math.ceil(tableWidthOnPage),
                     (int) Math.ceil(oneRowHeight *
                                     numRowsLeft));
        //else clip to the entire area available.
        else {
          g2.setClip(0,
                     (int) (pageHeightForTable * pageIndex),
                     (int) Math.ceil(tableWidthOnPage),
                     (int) Math.ceil(pageHeightForTable));
        g2.scale(scale, scale);
        printing = true;
        try {
        table.paint(g2);
        finally {
          printing = false;
        //tableView.paint(g2);
        g2.scale(1 / scale, 1 / scale);
        g2.translate(0f, pageIndex * pageHeightForTable);
        g2.translate(0f, -headerHeightOnPage);
        g2.setClip(0, 0,
                   (int) Math.ceil(tableWidthOnPage),
                   (int) Math.ceil(headerHeightOnPage));
        g2.scale(scale, scale);
        //table.getTableHeader().paint(g2);
        //paint header at top
        return Printable.PAGE_EXISTS;
    class TableRenderDollar extends DefaultTableCellRenderer{
        public Component getTableCellRendererComponent(
          JTable table,
          Object value,
          boolean isSelected,
          boolean isFocused,
          int row, int column) {
            setHorizontalAlignment(SwingConstants.RIGHT);
          Component component = super.getTableCellRendererComponent(
            table,
            value,
            isSelected,
            isFocused,
            row,
            column);
            if( value == null || value .equals("")){
              ( (JLabel) component).setText("");
            }else{
              double number = 0.0;
              number = new Double(value.toString()).doubleValue();
              DecimalFormat df = new DecimalFormat(",##0.00");
              ( (JLabel) component).setText(df.format(number));
          return component;
    }

  • Need some help with a Macally enclosure and a spare internal drive

    Need some help with a Macally enclousure
    Posted: Oct 1, 2010 10:55 AM
    Reply Email
    Aloha:
    I have a Macally PHR-S100SUA enclousure that does not recognise,my WD 1001fals hard drive. It has worked just fine with other internal drives, but not this one?
    This is a spare internal drive that I am trying to make an external drive to store back ups for a lot of data. But so far I can not get it recognized by the computer. Maybe I need different drivers?
    Any suggestions?
    Dan Page

    Hi-
    Drivers aren't typically needed for external enclosures.
    Macally has none listed for that enclosure.
    The same is true for the WD drive, internal or external; no drivers.
    With the exception of high end PM multi drive enclosures, I can't think of any that use drivers.
    How is the external connected?
    Have you tried different cables, different ports?
    Bad/damaged cables are fairly common.
    Have you verified connections inside of the enclosure?

Maybe you are looking for