Need simple directions for backing up manually

In preparation for upgrading to Leopard, I am in the process of doing a really good backup of all the important things on my hd. I am backing up to an external hd, but for the moment I am doing it manually, not wanting to use backup software. (I will get some in the future, but for now, I really want to learn to do it manually).
How do I do this, keeping my songs in their respective play lists? Do I just export one playlist at a time, along with the whole music library? I do use the library there in the application, right? Or is their another one I should be using in the home folder or somewhere? I obviously need this explained really simply.
Many thanks in advance.
Jane

Thank you very much. I appreciate the simple, easy to understand answer. I try to keep songs backed up to cd's, but they get kind of scattered. I plan to upgrade to Leopard, and my big fear is that suddenly everything will disappear. That is why I want a copy of everything on an external hd.
Many thanks again.

Similar Messages

  • I need simple instructions for backing up

    I have an iMac running 10.7.4.
    I have 4GB of memory
    I have a T back up disk, which is set up to automatically back up each night.
    I have not been able to back up now for over a week as it says I don't have enough room,
    "this backup is too large for the bu disk. Reqires 400.74 but only has 368.52 GB avail.
    How can I find out what files are designated by the Yellow bar?  The yellow bar is showing 400 GB of OTHER.
    I work with PSE and moved all the PSD files over to the external drive (which really wasn't a lot of GB). I thought it would be more and would free up a lot of space so I could back up. So, I really don't know where to go from here. I'm self taught with no one to ask ??.  I tried to search on the board here but was too confused.
    Would appreciate help.
    thank you
    Karen

    Deleting data on your computer does not free up space on the backup drive. You would need to use the Time Machine application (in your Dock) to delete files from the backup.
    Erasing the backup drive will not do anything to the main hard drive. But it will remove all your old backups. If that's not a desired result, then you can put this backup drive in storage, get a larger backup drive, and let Time Machine do a fresh backup on the new, larger backup drive.
    Time Machine will automatically backup all mounted disk drives unless they have been specifically excluded in Time Machine preferences. It's quite possible that Time Machine backed up this other external drive while it was connected.
    Please visit Pondini's Time Machine FAQ for help with all things Time Machine.

  • I need simple example for alv grid

    hi
    i need code for simple example for alv grid.
    thanks.

    hi bharat,
                  this is report with most of the functionality.
    report zus_alv_demo_grid .
    tables:     ekko.
    type-pools: slis.
    types: begin of t_ekko,
    ebeln type ekpo-ebeln,
    ebelp type ekpo-ebelp,
    statu type ekpo-statu,
    aedat type ekpo-aedat,
    matnr type ekpo-matnr,
    menge type ekpo-menge,
    meins type ekpo-meins,
    netpr type ekpo-netpr,
    peinh type ekpo-peinh,
    line_color(4) type c, "Used to store row color
    end of t_ekko.
    data: it_ekko type standard table of t_ekko initial size 0,
           wa_ekko type t_ekko.
    *ALV data declarations
    data: fieldcatalog type slis_t_fieldcat_alv with header line,
          gd_tab_group type slis_t_sp_group_alv,
          gd_layout    type slis_layout_alv,
          gd_repid     like sy-repid.
    Data declaration for EVENT and PRINT PARAMETER.
    data: gt_events type slis_t_event,
           gd_prntparams type slis_print_alv.
    data declaration for sorting.
    data : it_sortcat   type slis_sortinfo_alv occurs 1,
           wa_sort like line of it_sortcat.
    data :  i_list_comments type slis_t_listheader.
    start-of-selection.
      perform data_retrieval.
    perform user_command.
      perform build_fieldcatalog.
      perform build_layout.
      perform build_events.
      perform build_print_params.
      perform build_sortcat.
      perform display_alv_report.
    end-of-selection.
    *TOP-OF-PAGE.
    PERFORM top-of-page.
    end-of-page.
    *&      Form  build_fieldcatalog
          text
    -->  p1        text
    <--  p2        text
    form build_fieldcatalog.
      fieldcatalog-fieldname   = 'EBELN'.
      fieldcatalog-seltext_m   = 'Purchase Order'.
      fieldcatalog-col_pos     = 0.
      fieldcatalog-outputlen   = 10.
      fieldcatalog-emphasize   = 'X'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'EBELP'.
      fieldcatalog-seltext_m   = 'PO Item'.
      fieldcatalog-col_pos     = 1.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'STATU'.
      fieldcatalog-seltext_m   = 'Status'.
      fieldcatalog-col_pos     = 2.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'AEDAT'.
      fieldcatalog-seltext_m   = 'Item change date'.
      fieldcatalog-col_pos     = 3.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MATNR'.
      fieldcatalog-seltext_m   = 'Material Number'.
      fieldcatalog-col_pos     = 4.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MENGE'.
      fieldcatalog-seltext_m   = 'PO quantity'.
      fieldcatalog-col_pos     = 5.
      fieldcatalog-do_sum = 'X'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MEINS'.
      fieldcatalog-seltext_m   = 'Order Unit'.
      fieldcatalog-col_pos     = 6.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'NETPR'.
      fieldcatalog-seltext_m   = 'Net Price'.
      fieldcatalog-col_pos     = 7.
      fieldcatalog-outputlen   = 15.
      fieldcatalog-datatype     = 'CURR'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'PEINH'.
      fieldcatalog-seltext_m   = 'Price Unit'.
      fieldcatalog-col_pos     = 8.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    endform.                    " build_fieldcatalog
    *&      Form  build_layout
          text
    -->  p1        text
    <--  p2        text
    form build_layout.
      gd_layout-no_input          = 'X'.
      gd_layout-colwidth_optimize = 'X'.
      gd_layout-totals_text       = 'Totals'(201).
    Set layout field for row attributes(i.e. color)
      gd_layout-info_fieldname =      'LINE_COLOR'.
    gd_layout-totals_only        = 'X'.
    gd_layout-f2code            = 'DISP'.  "Sets fcode for
    *when double
                                            "click(press f2)*
    gd_layout-group_change_edit = 'X'.
    gd_layout-header_text       = 'helllllo'.
    endform.                    " build_layout
    *&      Form  data_retrieval
          text
    -->  p1        text
    <--  p2        text
    form data_retrieval.
      data: ld_color(1) type c.
      select ebeln ebelp statu aedat matnr menge meins netpr
    peinh from ekpo  into table it_ekko.
    *Populate field with color attributes
      loop at it_ekko into wa_ekko.
    Populate color variable with colour properties
    Char 1 = C (This is a color property)
    Char 2 = 3 (Color codes: 1 - 7)
    Char 3 = Intensified on/off ( 1 or 0 )
    Char 4 = Inverse display on/off ( 1 or 0 )
              i.e. wa_ekko-line_color = 'C410'
        ld_color = ld_color + 1.
    Only 7 colours so need to reset color value
        if ld_color = 8.
          ld_color = 1.
        endif.
        concatenate 'C' ld_color '10' into wa_ekko-line_color.
    wa_ekko-line_color = 'C410'.
        modify it_ekko from wa_ekko.
      endloop.
    endform.                    " data_retrieval
    *&      Form  display_alv_report
          text
    -->  p1        text
    <--  p2        text
    form display_alv_report.
      gd_repid = sy-repid.
      call function 'REUSE_ALV_GRID_DISPLAY'
           exporting
                i_callback_program       = gd_repid
                is_layout                = gd_layout
                i_callback_top_of_page   = 'TOP-OF-PAGE'
                i_callback_user_command  = 'USER_COMMAND'
                i_callback_pf_status_set = 'SET_PF_STATUS'
                it_event                 = gt_events
                is_print                 = gd_prntparams
                it_fieldcat              = fieldcatalog[]
                it_sort                 = it_sortcat
                i_save                   = 'X'
           tables
                t_outtab                 = it_ekko
           exceptions
                program_error            = 1
                others                   = 2.
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    endform.              " DISPLAY_ALV_REPORT
    *&      Form  user_command
          text
    -->  p1        text
    <--  p2        text
    *&      Form  top-of-page
          text
    -->  p1        text
    <--  p2        text
    form top-of-page.
    *ALV Header declarations
      data: t_header type slis_t_listheader,
            wa_header type slis_listheader,
            t_line like wa_header-info,
            ld_lines type i,
            ld_linesc(10) type c.
    Title
      wa_header-typ  = 'H'.
      wa_header-info = 'EKKO Table Report'.
      append wa_header to t_header.
      clear wa_header.
    Date
      wa_header-typ  = 'S'.
      wa_header-key = 'Date: '.
      concatenate  sy-datum+6(2) '.'
                   sy-datum+4(2) '.'
       sy-datum(4) into wa_header-info."todays date
      append wa_header to t_header.
      clear: wa_header.
    Total No. of Records Selected
      describe table it_ekko lines ld_lines.
      ld_linesc = ld_lines.
      concatenate 'Total No. of Records Selected: ' ld_linesc
         into t_line separated by space.
      wa_header-typ  = 'A'.
      wa_header-info = t_line.
      append wa_header to t_header.
      clear: wa_header, t_line.
      call function 'REUSE_ALV_COMMENTARY_WRITE'
           exporting
           it_list_commentary = t_header
           i_logo             = 'GANESH_LOGO'.
    endform.                    " top-of-page
          FORM user_command                                             *
    -->  R_UCOMM                                                       *
    -->  RS_SELFIELD                                                   *
    form user_command using r_ucomm like sy-ucomm
    rs_selfield type slis_selfield.
      case r_ucomm.
        when '&IC1'.
          if rs_selfield-fieldname = 'EBELN'.
            read table it_ekko into wa_ekko index rs_selfield-tabindex.
            set parameter id 'BES' field wa_ekko-ebeln.
            call transaction 'ME23N' and skip first screen.
          endif.
        when 'ULHAS'.
          if rs_selfield-fieldname = 'EBELN'.
            read table it_ekko into wa_ekko index rs_selfield-tabindex.
            set parameter id 'BES' field wa_ekko-ebeln.
            call transaction 'ME23N' and skip first screen.
          endif.
      endcase.
    endform.
          FORM set_pf_status                                            *
    -->  RT_EXTAB                                                      *
    form set_pf_status using rt_extab type slis_t_extab.
      set pf-status 'ZNEWSTATUS'.
    endform.
    *&      Form  build_events
          text
    -->  p1        text
    <--  p2        text
    form build_events.
      data: ls_event type slis_alv_event.
      call function 'REUSE_ALV_EVENTS_GET'
       exporting
         i_list_type           = 0
       importing
         et_events             = gt_events[]
    EXCEPTIONS
      LIST_TYPE_WRONG       = 1
      OTHERS                = 2
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
      read table gt_events with key name =  slis_ev_end_of_page
                  into ls_event.
      if sy-subrc = 0.
        move 'END_OF_PAGE' to ls_event-form.
        append ls_event to gt_events.
      endif.
      read table gt_events with key name =  slis_ev_end_of_list
                  into ls_event.
      if sy-subrc = 0.
        move 'END_OF_LIST' to ls_event-form.
        append ls_event to gt_events.
      endif.
    endform.                    " build_events
    *&      Form  build_print_params
          text
    -->  p1        text
    <--  p2        text
    form build_print_params.
      gd_prntparams-reserve_lines = '3'.   "Lines reserved for footer
      gd_prntparams-no_coverpage = 'X'.
    endform.                    " build_print_params
          FORM END_OF_PAGE                                              *
    form end_of_page.
      data: listwidth type i,
      ld_pagepos(10) type c,
      ld_page(10)    type c.
      write: sy-uline(50).
      skip.  write:/40 'Page:', sy-pagno .
    endform.
          FORM END_OF_LIST                                              *
    form end_of_list.
      data: listwidth type i,
      ld_pagepos(10) type c,
      ld_page(10)    type c.
      skip.  write:/40 'Page:', sy-pagno .
    endform.
    *&      Form  build_sortcat
          text
    -->  p1        text
    <--  p2        text
    form build_sortcat.
    wa_sort-spos      = 1.
    wa_sort-fieldname = 'EBELN'.
    append wa_sort to it_sortcat.
    wa_sort-spos      = 2.
    wa_sort-fieldname = 'EBELP'.
    append wa_sort to it_sortcat.
    endform.                    " build_sortcat
    Rewards if helpfull
    regards
    vijay dwivedi

  • Need simple class for communicating with Solaris account

    Hey, gang. After over a week of searching this forum and the Web for a solution, I'm stuck. I hope someone here can help.
    I've got a Java application intended to run on both Windows and Solaris systems that needs to perform the following automated operations:
    1. Connect to a user account on a Solaris server.
    2. Login.
    3. Run an sccs command.
    4. Retrieve the output from the sccs command.
    I can run commands (such as sccs) directly from Java; I've worked out how to do that. My situation is that I need to run sccs from an authorized account so that all file checkin/checkout operations are tagged properly. So the requirement to connect to a server isn't one I can ignore. I also don't need a full-up interactive client interface -- this needs to be an automated process.
    What I'm hoping is that someone here will be willing to provide (or point me to) some relatively simple source code I can call to do this stuff. Maybe an example of a class that uses Socket and a couple of streams to programmatically connect to a server, send commands, and capture input. That's really all I need.
    I've tried calling the Jakarta Commons telnet class to connect to the Solaris server, but it's more overhead than I need. (Plus the input stream kept blocking when I tried to use it in a purely automated mode.) I've also tried rolling my own code using the minimal info available on Google, but have not been able to figure out the magic words necessary to get anything back but gibberish. (InputStream and BufferedReader just do not seem to want to cooperate. Either I get back only garbage text, or readLine() or read() gets nothing and just sits and waits until the timeout.)
    So I turn to the experts here. If anyone can offer (or direct me to) any simple, non-libraried source code that enables my Java code to connect to and talk to a Solaris machine, I'd be grateful.
    Thanks!

    I was hoping a separate server-side process wouldn't be needed -- if you're thinking of something like RMI, that's also a bit heavyweight for my needs. I know I can talk to the remote server on telnet port 23, though.
    Further experimentation today with the Jakarta net library has generated something that works using their telnet classes. (After I asked for help here, of course. The same thing happens when I shop for groceries....) But using this leaves me referencing an external library that:
    1. has functionality I don't need that complicates the code, and
    2. forces me to address licensing requirements.
    So I'd still love to see an example of a telnet-like Java class that strips away all the non-essentials in the Jakarta telnet library code, leaving behind a simple public domain class that can be used to connect to a remote host and transfer characters over that connection.
    I appreciate that this may be asking for a lot, but as they say, if you don't ask, you don't get. ;-)
    Thanks!

  • Can anyone suggest a simple system for backing up my MacBook?

    I have a MacBook 120G which runs Tiger. I also have an Aiport Extreme, which is connected to a printer via USB. I want to buy an external hard drive to create a safety back up of my whole system. I have been trawling the suppliers' websites, getting more and more confused. Can anyone suggest the simplest solution for a simple-minded user like me? These are my main confusions:
    a) Can anyone suggest what type / make of hard drive I should buy in order to be able to store my computer's contents and re-boot it in the event of disaster? Will a non-powered hard drive do the job or is it somehow better to get a powered one? It would sit near my desk so I am keen to avoid fan noise if at all possible! I believe I'll need to 'partition' the drive in order to make it bootable, or something - if this is correct, what kind of hard drive is easiest and idiotproof for this?
    b) I think I've concluded it's not worth binning my Airport Extreme and replacing it with a Time Capsule. But is it worth buying Leopard in order to get Time Machine? I believe I can still use the Airport Extreme to connect to the hard drive so that Time Machine would make backups regularly and wirelessly? If so, do I need to use a USB hub from the Airport Extreme so that I can still keep the printer connected? I can only find one HD which has a built in hub - the Iomega Minimax - but I have read reviews saying the fan is noisy. Any other suggestions?
    Any help and suggestions about this would be very gratefully received. Many thanks
    Steve

    Leopard is a nice upgrade (if your computer has 2GB of memory) and TimeMachine is convenient but it isn't the only way to create a reliable and simple backup system. If you decide TM is your solution buy a drive that has 2 to 3 times as much space as you are using on your computer now. If you are using 80GB of your drive now, buy a 160GB to 240GB drive for TimeMachine. It keeps multiple backups and eats up drive space pretty quickly.
    Lots of good backup programs exist but the one I really like is called SuperDuper! It will create an exact duplicate of your hard drive and you can set up a schedule so that automatically backs up new and modified files at specific times/days. With my MacBook I connect it to my external drive on Friday evening and let SuperDuper! do its work overnight. If you chose this router or another that doesn't use TimeMachine, get a drive at least as large as your computer's hard drive.
    The Western Digital MyBook series is a good choice and so is the Seagate FreeAgent series. I'd avoid self powered external drives like Western Digital's Passport series unless you intend to travel with the drive. They require special proprietary cables to power the drive which are easy to lose and expensive to replace, among other things. If you can afford a firewire drive that's generally preferable because firewire is faster than USB but the speed difference isn't blazing. If you do you backing up over night speed won't be an issue.
    Whether you use TimeMachine or another program, this is just once phase of a backup plan. If you experience a break-in, fire, or flood the backup drive is probably going to experience the same fate as your computer. You also need to think about taking a backup of your most important files off-site. This can be as simple as once a month burning a DVD of your documents, digital photos, and email to a DVD and taking it to work.

  • I need simple instructions for setting up hosted home directory

    Folks, I am just learning how to use OS X server (10.3.9) in our office. The manuals aren't totally clear.
    We have a lot of interns that work on shared documents on several machines. I want them to be able to login into an account on the server (where the shared files will be) and work on them that way.
    I am not quite sure how to do this. The server is already set up. I set up a LDAPv3 domain (not sure why I needed to - just following the manual instructions.
    Things I don't understand:
    - why did I need to setup another domain directory (per the manual's instructions). The local one does show up on our LAN even though workgroup manager says it's not visible to the network. Everyone can see the sharepoint I've created.
    - I can't seem to do anything with the Access Control List. I can't put anyone in it.
    Please advise.
    Tangier

    the LDaPv3 is so that if someone isn't on the local subnet of the server they can access their user account. By having a specific directroy domain you can have an address that can be access from anywhere on the network.
    It is also there so you can be able to create indivudual user accounts to have the ablitly for users to login to multiple machines and have there home folder located on the server. This allows users to not be restricted to a specific machine but still have access to all their files.
    to have the hosted home directories you first need to create a location to have the home directories... then enable sharing on that location. this can be done in the workgroup manager under sharing. Make sure under the "network mounting" you enable use for home directories. Once that is created and set up you will now be able to choose that location for users home directories under "home" in the accounts section.
    I don't have much experience using the ACLs sorry... basically for a share folder i make a folder, enable sharing on it in workgroup manager, mount the folder and then drag it to the login items for that group that i want to use that folder. that way when a particular user of that group logs in the share folder will mount and they can have access to the folder with out having to login to the server.
    I hope that helps a little and didn't confuse you more... i am still new myself but i have had to set up the individual users and share folders.
    ALSO: when having users work with the shared documents... make sure they are coping the files to there local user then copy back when they are done... this will help avoid potential issues with files being opened by multiple people and chances of file corruption.
    again i hope that didn't confuse you more
    dm

  • In need of advice for backing up HD Video

    So we returned from a vacation,
    where I shot all the video in HD 1080p.
    We got back, and I used Final Cut Express to convert the AVCHD files from .mkv to .mov files.
    All together, the total files come to a whopping 78.93 GB. Wow.
    I need to back these up to DVD's or something
    (My wife says she doesnt want them on an external hard drive, her last one died)
    is there a way I could compress these?
    or should I use quicktime/visualhub to bring down the quality a little?
    any advice would be greatly appreciated
    thanks

    Solutions:
    1) ignore the wife and backup to a good hard drive such as a LaCie quadra. usb or firewire.
    2) Buy Time Capsule and backup to it.
    3) what would i do? Use MPEGStreamClip to make mp4 files , to control the file size. The picture will still look very good but it does not do 5.1 channel sound. Handbrake does but since the file is HD probably will crash while encoding so will VisualHub. Another consideration, MPEGStreamClip on a 2 gig HD movie will take 15 hrs on a Mac pro let alone an iMac.
    Currently not too many programs will do HD encoding.
    4) backup to optical disc, I'd never do that ; too many compatibilty issues with different drives perceived for future usage.
    5) back to the wife, user should alway have three backup stategies; ie main drive then backup # 1 then backup #2. I've backup to external and internal hard drives for over a decade without problems.
    Message was edited by: Smokerz

  • Need walk thru for backing up Leopard/Windows systems

    I have Leopard/Windows preinstalled on my intel 250Gb Imac (installed by seller of the Mac). I am tech unsavvy and would appreciate a step by step walk thru of how to back up both systems onto a single 500Gb external hard drive (assuming I am using CCC and Winclone). I am particularly confused about partitioning the external drive for this purpose. Thanks to any patient reader who can help.

    No need to partition the external drive; just make sure it is formatted as Mac OS Extended using Disk Utility. Then start up CCC and clone using the default settings with the source being your main drive and the target being the external (this may take awhile). This will give you an identical clone of your main drive. Then you can run Winclone, which will copy your Windows partition to a file on whatever Mac drive that you choose. You will not be able to run Windows from the cloned file, but could use it to restore your Windows partition.
    bd

  • Simple directions for setting up a new magic mouse?

    Have the original mouse, which keeps losing its connection.  I am replacing it with a brand new Magic Mouse and have looked all over for directions to connect with with my MAC, discontinue the original mouse, and start using the new one.  I have checked all my updates and downloaded the most current magic mouse software.  A pop up says there is a new version of the download already loaded, but I can't find it. 
    Can someone tell me if I really need a new mouse and can help me correct my connection loss on my orginal mouse or help me, step by step, to connect the new one?  Thank you all.

    Reset the PRAM to see if that helps the old mouse.
    Setting up the new one should be turn it on and it should pair.
    Barry

  • Need simple javascript for pro x

    I am trying to find someone to script for acrobat pro x
    I am struggling to find someone that can script this...
    I start with an open multi page pdf in acrobat pro x
    Under the Tools panel, select the Edit Object tool.
    Ctrl + A will select everything in the current page.
    Right click and select flip horizontal.
    Lastly, page down.
    Then repeat all these steps on each page.
    I really need this automated somehow...

    There is a commercial Acrobat plug-in that can do this: http://www.quite.com/box/features.htm

  • Beginner needs simple direction on imaging

    Hello,
    I need to load a picture of arbitary size and display on a fixed pixel size panel, how do i enable this? Suppose the original picture was bigger than the fixed size, how do i compress the image to the required size? Or what if it was smaller, how do I magnify it? Please give me some directions.
    Thank you.
    Rt.

    import java.awt.*;
    import javax.swing.*;
    public class Test2 extends JFrame {
      public Test2() {
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        Container content = getContentPane();
        MyPanel mp = new MyPanel(new ImageIcon("C:\\duke.gif").getImage());
        content.add(mp, BorderLayout.CENTER);
        setSize(400,400);
        setVisible(true);
      public static void main(String[] args) { new Test2(); }
    class MyPanel extends JPanel {
      Image image;
      public MyPanel(Image i) { this.image=i; }
      public void paintComponent(Graphics g) {
        g.drawImage(image, 0,0,getWidth(), getHeight(),this);
    }

  • ABAP Help- need some direction for payment lockbox

    Hello SAP Guru's
    Can anyone give me direction as to how to begin or research how to perform the following:
    My client, when a deduction is on a check, it will go Cash on account or Partially applied.  My client doesn't want user intervention to leave those on account but rather go ahead and set those to applied and leave cash on account with posting key 06.  I understand we can create a preprocessor program or ABAP to post these items cash on account automatically. 
    How can I do this?  Is there any documentation?
    A MILLION THANKS!
    Points Awarded

    no reply

  • I just signed up for Netlix...they offered in the "opt out" privacy settings, for me to download, for Firefox users, the Network Advertising Initiative, NAI,..how do I uninstall this, in simple directions please. use my email naumoff@email.unc.edu

    The NAI came to me while in privacy opt out setting signing up for Netflix...I need to uninstall it...I can't find where to do that on my computer. Need simple directions. use email: [email protected] as NAI is strangling my computer and takes forever even on your site, to load a page.

    Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
    Contact information Dennis [email protected]
    Previous contact information with your organization (DURIM):
    Dennis - i just finished my audition trial and bought the subscription the 2014 version.
    created by durin in Audition CS5.5, CS6 & CC - View the full discussion 
    DURIM - Okay.  I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
    If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]?  We'll take a look in that logfile and see if it gives us more information about why this is failing now.
    Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro?  If so, do they launch as expected or fail as well?
    I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
    Audition Log- file
    Ticks = 16       C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
    Sent from Windows Mail

  • HT201250 Using Time Capsule for Backing Up a RAID Array

    I am setting up an 8TB RAID 0 array at home. I am going to use 4 - 2TB FW drives. I already have an SSD in my 3.4 Ghz i7 iMac but am speed hungry and since I have the drives, I figure I would play a bit. I know it is vital to have solid back-up for this, but I am unsure of the best back-up solution. I am wondering if I can attach 3 - 3TB drives to my 1TB Time Capsule and use the combined 10TB in Time Machine to back it up? To date I have backed up each drive separately, but am realizing the folly of that and want to explore RAID 0 at the same time as explore a new back-up solution. Everything I read tells me I need a drive for backing up the RAID array that is at least as large as the combined total of the array. That doesn't make sense if the array is so large... I can't find anywhere if Time Machine supports spanning mulitple back-up drives.

    According to the document linked below, you can, but it may not have the performance to back up that much data. Over Wi-Fi, forget it.
    Uses for the USB port of Time Capsule, AirPort Extreme, AirPort Express

  • I need a simple Converter for a selectBooleanCheckbox.

    Hi,
    Can someone tell me how to build a simple converter to go from a selectBooleanCheckbox value to a String and back.
    I save a String ("Y" or "N") in my table but the checkbox returns a boolean. I need a Converter to do the conversion from TRUE to "Y" and FALSE to "N". Should be easy to do but as of now, mine won't even execute properly.
    I get a
    javax.servlet.ServletException: javax.servlet.jsp.JspException: Can't instantiate class: 'ca.sshrc.web.common.converters.BooleanConverterYn'.
    I don't understand how getAsObject and getAsString work I guess.
    Thanks

    Hi,
    Has anyone been able to make the converter for "<h:selectBooleanCheckBox>" work??
    seems like the converter method itself is not getting invoked.
    this is what i am trying to do..
    Code in jsp is
    <h:selectBooleanCheckbox id="testCheckBox" value="#{myBean.testCheckBox}" >
         <f:converter converterId="booleanConverter" />     
    </h:selectBooleanCheckbox>entry in faces-config is
    <converter>          
           <converter-id>booleanConverter</converter-id>                  <converter-class>package.MyBooleanConverter</converter-class>
      </converter>class MyBooleanConverter looks like this at the moment
    public class MyBooleanConverter implements Converter {
         public Object getAsObject(FacesContext context, UIComponent component, String value) {
              myBooleanClass myBoolean = new myBooleanClass(value);
              return myBoolean;
         public String getAsString(FacesContext context, UIComponent component, Object value) {
              return value.toString();
    }     Have kept myBooleanClass as a simple wrapper for the Boolean class.
    Same is working for string and integer but not in this case..
    Am i going wrong somewhere... kindly help

Maybe you are looking for