Need skype no. only for 1 month

hi,
is that possible to have skype no only for 1 month?

Hi Dave828,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

Similar Messages

  • Calendar - when I want to edit a monthly recurring event but only for one month I am no longer given the box to update only that date.

    Calenndar - when I want to edit a monthly recurring event but only for one month I am no longer given the box to update only that date month.  How do I do this with the new operating system?

    Adding to Alan's answer:
    One of the problems that comes with these tricks for variable-rate acquisition is being able to match up sample data with the time that it was sampled. 
    If you weren't using either of E-series board's counters, there is a nifty solution to this!  You'll be using 1 of the counters to generate the variable-rate sampling clock.  You can then use the 2nd counter to perform a buffered period measurement on the output of the 1st counter.  This gives you a hw-timed measurement of every sampling interval.  You would need to keep track of a cumulative sum of these periods to generate a hw-accurate timestamp value for each sample.
    Note:  the very first buffered period measurement is the time from starting the 2nd counter until the first active edge from the 1st.  For your app, you should ignore it.
    -Kevin P.

  • How do I add a new user to my account? But I wanna give him a special product (e.g. InCopy) only for some month...

    I am admin and I want to add a new user to my account. But as written above, I want that he/she will get this product only for some month and not for a whole year.
    Thanks for the help.

    Team license links that may help
    -manage your team account http://forums.adobe.com/thread/1460939?tstart=0
    -Team Installer http://forums.adobe.com/thread/1363686?tstart=0

  • If I want the month-to-month licence only for one month do I have to cancel and how?

    if I want the month-to-month licence only for one month do I have to cancel and how?

    I have never tried to use a program for only one month, but here is how you cancel
    -cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -or http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • Buy CS6 only for a month - Acheter la suite CS6 pour un mois seulement

    Hi everyone,
    I would like to buy the CS6 suite for one month, witch is the time I need to finish my StudyWork Project. I've already try CS6 during a month, but I need to use Premiere - After Effect and Photoshop for a month. I am ready to pay, but not for a year, only for the time I need. Is it possible ?
    Bonjours tous le monde,
    J'aimerais acheter la suite CS6 pour un mois seulement, ce qui est le temps dont j'ai besoin pour terminer mon travail de fin d'étude. J'ai déja essayé gratuitement CS6 durant un mois, mais j'ai encore besoin de première - after effect et photoshop durant une vingtaine de jours. Je suis près à payer, mais pas pour une année complète, seulement le temps dont j'en ai besoin. Est - ce possible ? Je voudrais éviter autant que possible de recourir à des 'cracks' du programme. 
    Loïc

    You can sign up for Creative Cloud for a month at full price with no discounts at all and from there use CS6.
    Mylenium

  • Logon image needs to change automatically for corresponding month

    Hi All,
       We have a requirement where in,the logon image needs to change according to the month.If Jan then 'mage A'if Feb then 'mage B' simillarly for dec.We have 12 images.How can i acheive this?Kindly help in this regards.
    Thanks in Advance,
    Naga

    ok, then you have to change login module, try using scheduler servlet, which will create time interval. Also you have to copy all images in one folder location in server, but check with image name because it might affect.
    Edited by: Yogesh Galphade on Feb 23, 2011 7:41 PM

  • HT201371 A "bug"?. Need touch ID only for app store and no passcode to unlock the Phone!

    Hello. I have an Iphone 5S and have a doubt about the touch id. I want to use it only for getting apps from the apps or itunes store. To unlock the phone i don´t want neither touch id or passcode. Is this possible?
    I´ve tried all the options available.
       - if only select touch id for app store, it keeps asking me the passcode to unlock the phone
        - If i turn the passcode off, it doesn´t allow me of course to use touch id anywhere...
    Thanks in advance for the help!

    Josh Noob wrote:
    I get in and out of my phone 100 times a day I'm not going to waste .5 seconds every time just to unlock my phone.
    If you're using Touch ID, it takes no longer to unlock your phone than it does to pick it up. That's the whole point. It certainl doesn't take 5 seconds. Of course, it also doesn't take 5 seconds for me to enter a 4 digit passcode.
    Best of luck.

  • Load data only for current month using ABAP Routine

    Hi Everyone,
    I am loading data from R/3 using the 0HR_PA_OS_1 extractor. This requirement is to load the position numbers from R/3. Using the extractor for a given position 28 I get the following dataset results.
    CALMONTH  POSITION
    11-2004           28
    12-2004           28
    01-2005           28
    02-2005           28
          |
    07-2007          28     CURRENT DATE
    Now when I pull data in BW I only want to load the record for most current i.e. 07-2007. I DO NOT want that ALL the records since the day the position was created should be loaded.
    Now I do understand this can be achieved using a ABAP routine in the INFOPACKAGE. Below is the routine that I am using and what it is doing is that it is only bringing in the first record.
    data: l_idx like sy-tabix.
      clear: l_idx.
      read table l_t_range with key
           fieldname = 'CALMONTH'.
      l_idx = sy-tabix.
    Current month only
      l_t_range-low = sy-datum(6).      "Current month
    l_t_range-high.
      l_t_range-option = 'EQ'.                           "equals
    l_t_range-sign = 'I'.
      modify l_t_range index l_idx.
      p_subrc = 0.
    Can anyone suggest a solution as to why this is happening?
    Thanks,
    Rahul

    One explanation would be
    - If there is no CALMONTH selection values specified in the selection tab, l_t_range would be empty. This would mean there would be no line for CALMONTH selection, and the code won't modify the l_t_range.
    If this is true, you need to check sy-subrc after reading from the itab.
    data: l_idx like sy-tabix.
    clear: l_idx.
    read table l_t_range with key fieldname = 'CALMONTH'.
    if sy-subrc = 0.
    l_idx = sy-tabix.
    * Current month only
    l_t_range-low = sy-datum(6). "Current month
    * l_t_range-high.
    l_t_range-option = 'EQ'. "equals
    * l_t_range-sign = 'I'.
    modify l_t_range index l_idx.
    else.   
    move 'CALMONTH' to l_t_range-fieldname.
    l_t_range-low = sy-datum(6).
    l_t_range-sign = 'I'.
    l_t_range-option = 'EQ'.
    append l_t_range.
    endif.
    p_subrc = 0.

  • Skype Free Trial for 1 Month

    Hi there,
    I have just clicked on 'Click here to redeem your gift' for a free month trial for an unlimited calls to 40 countries for free. After I claimed my free trial month, the first call to China (a landline number) for only 7.5 minutes and I was charged 20 pence for that. It is clearly on the email Skype sent to me that China is included in the free country, and even if it's NOT free, I was charged 1.2p per minutes before I upgraded to this trial. It's not right to charge me this much for 7 minutes call to China (Landline). Does anyone else has the same problem as me? as it appears not fair for the charges.
    Plase leave your kind comments here. Many thanks.

    RuhFY wrote:
    Hope someone will be able to advise me.
    Hello.
    Your account shows that you are calling a cellphone in Turkey. Please note that only calls to landlines in Turkey are included in the Unlimited World Subscription.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Need to give REVOKE CLOSE option in CO02 only for selective users

    Hello,
    Need to Restrict Revoke Close Option in Tcode CO02 (Under Functions - Restrict Processing - Revoke Close) through Role/Object Level.  Can any one suggest how to control this .    Need to give access for CO02 for 5 Users , but only 2 Users can able to do Revoke Close Option , other 3 Users should not able to do this activity.
    BR,
    Murali

    There is no authorization object as B_USERSTAT_T , but there is a authorization object as B_USERSTAT . I tried to create a Temporary Role and manually assigned this Object .  In this object there is no way to control REVOKE Close option . 
    But there is one way noted in Google to restrict Revoke Close option .
    1.Goto BS22
    2.Select the system status TEC0 (I0045) & just duble click it,
    3.Maintain the Revoke technical completion (BUTA) =Forbidd (not allowed),
    But if i set the above Parameter ,  this will restrict Revoke Option for all the users .  I need to control ONLY for selective users .  I can set some value in user data for those users  , based on that i can write some coding to restrict , but i want to know where to write this code ....  I tried in some area , but it never works.
    Can any one give some idea to fix this issue.
    BR,
    Murali

  • Within the budget template; how would one create an entire year worth of a budget; with out having to create a separate page for each month?

    Help!
    Loving the budget template, but I would like to be able to create an entire years worth of a buget with out creating a whole new transaction/budget page for each month. How do I get the new transaction to identify a new budget chart?
    Thanks, Emily

    Emily,
    No need to think the budget template is only for one month.  Just keep typing the date in the date column of the "Transactions" sheet and the details will update.  You should adjust the budget categories to match the duration of time you want to use.
    If you do want month-by-month, then you can switch to the "Transactions" sheet, select the table, cut
    then switch back to the "Budget" sheet, paste.
    Now rename the "Budget" sheet something like "Budget Jan 2014", and delete the "Transactions" sheet. Set the budget for Jan in the column I highlighted above.  The subsequent months, duplicate the monthly budget:
    Then adjust the the entries in the transactions table inside this sheet.

  • SNP releases pur req for 18 months,can I convert pur req to pur ord for 2 m

    Hello expert,
    please suggest me how could i solve below issue.
    Scenario: SNP releases purchase requisition for 18 months. I need to convert purchase requisition into purchase order only for two months. u2013 how could I do this?
    How can I do this conversion in R/3 for 2 months not for 18 months? How could we do this conversion in PPDS?
    Thanks in advance.
    Aritra

    Hi,
    In PPDS you can use Tcode /SAPAPO/RRP7 and select the PR to PO Conversion based on next 2 Months.
    Thanks,
    nandha

  • I have skype premium paid for and keep saying i ne...

    Spoiler (Highlight to read)
    exactly the subject. i have paid skype premium and it says i need skype premium. had for over a year and dont see why i should have to try and find someone to speak to to resolve.
    exactly the subject. i have paid skype premium and it says i need skype premium. had for over a year and dont see why i should have to try and find someone to speak to to resolve.
    Spoiler (Highlight to read)

    never had this problem until about a month ago. sharing a scree with someone and a video window at the same time. says i need skype premium when i already have it

  • Quota Restriction for Mid- Month Joineees

    For employees who have joinedon or after 15th of a month , quotas should not be generated only for that month. The Quota is getting generated through Time Evaluation.
    How to configure the same?
    Current scenarion: 2.5 days per month.
    Requirement is that for example an employee joining on 15th of a month should not get leave credit for that onth & from nect onth onwards he will get regularly..
    Regards,
    Megha

    Hi Vasehgal,
    Thanks for your inputs. The client does not use date type like date of joining or trchnical date of entry...
    So is there any other alternative..
    I am trying using userexits....
    Regards,
    Megha

  • SAP XI runtime workbench doesnot display data for previous months

    Hi,
    We are experiencing an issue in our XI system. When we try to extract messages from the Integration engine we recieve data only for two months including the present month and not for previous months.
    Can you pleaes suggest which SAP job or any set parameter is creating such a scenario.
    Thanks in advance and suggestion are welcome.
    Regards,
    Subhram

    You should check the archiving/deletion jobs in the PI Admin Check guide..
    Kind regards,
    Mark

Maybe you are looking for