Need slower/longer title crawl

iMovie's scrolling block of text goes by too fast for me and it doesn't last long enough. (Plus, it center justifies everything.) Does somebody make a plugin that addresses this? I know I can create multiple crawls and overlap them but this is just a kludge as far as I'm concerned. Or what about a non-scrolling block of text that isn't a music video infolet?
Thanks.

Sue, thanks for that link. It does look like their pdf title plugin would work. I *really, really* wish they didn't force you to buy a ton of plugins you don't need, though. The per unit price is low that way, but I don't care about any of the others they include in the package, making it a lot less attractive at fifty bucks. For folks with lots of disposable income (not me) that sounds fine but for the paupers among us (me) it's quite a bit. (Why do you think I only have a G4 Sawtooth?

Similar Messages

No second page in rolling title - need help with long title

I am creating my first rolling title in Premiere Pro v1.0.
I have read/watched the tutorials on creating a rolling title and have successfully created my own.
My problem is that I have several pages of prepared text that I want to have roll over the screen and I only can get the first page.
I have the text in Notepad, I copy it to the Clipboard using Control-A, Control-C.
I come into the Title Designer, select the Type Tool, and press Control-V. The first page of the text is inserted into the Area Type box.
I then save the work and preview the results, but I am only getting the roll of the text for the first page.
Can someone please point out to me what I am doing wrong or direct me to some documentation/tutorial that shows how to insert a long amount of text into the Title Designer and have it roll?
Thanks

I currently do not have Photoshop available to me and I was really hoping for a simpler method to do this.
That is why I mentioned method #2. It relies totally on Titler. Other than doing X number of Titles, and then adjusting their timings and spacings with Motion>Position Keyframes, it takes all of about 5 mins. to do. You can first break your one very long Title into logical segments, and then still use Ctrl+c/Ctrl+v to make each Title. Note that you can get more text into a Title, than what you see in Titler. It does not have a "scrolling" feature, but using Ctrl+c/Ctrl+v, you really do not need to see everything, so long as you edited it in Word/whatever. I'm not sure of what the limit to what can actually fit onto one Title, before it truncates, but seem to recall about 32 lines working with 48 pt. san-serif type for me. Could be off a line, or two.
If you need more detail on the multiple-Title method, let me know. It is far simpler to do, than to type about. Also, if you are not yet comfortable with Motion>Position Keyfreame work, now is the perfect time to learn it, as you WILL embrace it. I do not think I have used either the Roll, or Crawl Preset in four years - so very little control. That's why I said you'd go crazy trying to use those for this task. If I had to do it with the Presets, I'd charge the client 3x, just for the aggravation of having to do so.
Good luck,
Hunt
If you have any questions on where to break your long credits, don't hesitate to send me the Word, txt, whatever file, and I'll look at it and make recs. for you. E-mail is listed in my profile.

After upgrading to 10.7.2, my iMac works fine for 40-50 minutes, then slows to a crawl. Restart gets back to normal, then 40 minutes later need to restart again. Thought about reinstalling Lion through Lion Recovery, but says my hard disk is locked?

After upgrading to 10.7.2, my iMac works fine for 40-50 minutes, then slows to a crawl. Restart gets back to normal, then 40 minutes later need to restart again. Thought about reinstalling Lion through Lion Recovery, but won't let me, says my hard disk is locked? Any suggestions?

Launch the Terminal app in /Utilities/, run these two commands (copy & paste each one separately and hit the return key):
sudo chflags 0 /volumes/*
sudo chmod a+rx /volumes/*
at the Password: prompt, type in your admin password, carefully since nothing displays on the screen, and hit the return key. These should unlock your drives. You might have to restart.

Why has my native windows 7 Pro-64 network to a windows 7 Pro-64 VM has slowed to a crawl and freezes, after the new Arris cable modem was installed?

Please appreciate the details, so the complete situation can be visualized:
The office network:
New Mac Mini PC running Win 7Pro 64, (in boot camp), networked to an iMac running the same Win 7 Pro 64, VM, UNDER Fusion 7Pro.
To review: My treatment rooms former dell PC/running vista business/ running the server and network versions of my Dental practice mgmt & X-ray capture apps, had no probs WLAN to the front desk iMac running the same PC client dental network apps under the same vista business, & Fusion 4. The dell slowly fried its power supply .
I could not wait to replace it with a Mac mini/ boot camp/ win7 pro 64 bit, as it has to run natively to capture X-rays. The front desk iMac was also upgraded to os10.10.3/ Fusion 7pro/ and its own matching Win7 pro 64bit. The iMac is wired and WLAN connected to a netgear d600 router and a Time Warner Cable modem. The modem then failed and was replaced by an arris modem. As the Arris was configured out of the box, the network ran much slower slowed, as compared to the original modem. BUT- The Vonage 2 line phone system stopped working- no incoming or outgoing voices could be heard after it rang. Then twc remote configured it and the phone now works, but the network iMac slowed to a crawl, and now freezes when accessing the Mac Mini PC dental server to edit or enter data. The Mini perfectly accesses the internet via wifi. It accesses the front desk canon printer by wifi, and can print share they the iMac that is wired to the printer, as well, BUT, the network connection is a spinning pinwheel. The front desk imac easily finds the Mac Mini PC server on the network. It connects easily by entering the servers IPv4 address SHOULD THAT last value change. But if data isn't entered in slow motion, the window and app freezes, and has to be force quit by Task Manager!
Cause:
1. I think TWC switched the cable modem from the default- Non Bridged, to Bridged mode. Could this be the cause?
2. The network setting in fusion, on the iMac is auto detect, a setting that always worked with vista and with the new Win7 system, before TWC installed the new arris modem. 3. Switching to NAT does not work at all is there a different setting to use?
3. Does the Netgear Router have to have a port or pref configured so as not to block the Server.
4. might in need an Access Point (I have an extra netgear wdr3400) ).
5. Do I need an Extender that plugs into the AC LINE?
I hope this info helps.
PS:(some addtl info:
1. File sharing works fine between the minis -Mac and boot camp sides and between the iMacs- Mac and VM sides and between eother side to or from either of the 2 computers! 2. Also either office computer and all of my my home macs , (& my iPad, & iPhone), can access each other instantly and flawlessly, with splash top streamer and jump desktop remote apps, as controller or as client! In fact, the front desk iMac can remote control the mini PC AS IF YOU WERE DIRECTLY ENTERING INFO I TO IT!
SO I think it's either a misconfiguration in the TWC cable modem &/or some additional pref to config in the router? Thanks so much for your help, (been using VM's since VPC1. & Win95 in a iMac, 1999, DV MODEL! (TWC BLAMES VONAGE FOR NOT OPENING SOME PORTS IN THE TELE MODEM. Vonage blames TWC FOR NOTopeningj ITS PORTS IN THE CABLE MODEM, when they meant the ports on the Netgear. They have passed the buck for 6 weeks with not even a guess at what to do. VERY FRUSTRATING! Again, thanks to all!

Okay Saint Steven, I'll bite:
I read your description multiple times, very carefully, and I am still confused. May I suggest the following:
* Follow basic troubleshooting procedures. Isolate each individual problem. Don't try to get everything working at once. Make one change at a time.
* If I read your description correctly, the Netgear D600 (??) Router is the office LAN (not WLAN). Connect each piece on the LAN separately one-by-one, and test each piece individually. Get your LAN and its devices working first. Forget about the Vonage and the Arris Cable modem.
* Next, look at your Internet connection. Again, try each piece separately. Depending on how the original cable modem and the new Arris cable modem are configured, you may also have to adjust the configuration of the Netgear D600 Router.
* Finally, if you are still having problems, try to organize your thoughts and presentation before you post again. List each element in your network. List how each element is configured. Be systematic.
"Arris cable modem" does not help much - some are simple bridges, others are routers, etc.
To answer your questions:
1. I can't tell from your confusing description, but I don't think so. It seems like the problems are associated with the system changes you made (replacing Dell, etc.) and the problems seem to be isolated to the local LAN.
2. Auto detect should work, but it is easy to change and test, as long as you change one thing at a time.
3. No. The Netgear router should allow all communications on the local LAN. Could you have put the "server" in the DMZ?
Note: I could not find a Netgear "D600" model in a web search. Do you mean N600?
4. No. I doubt that you need an additional access point. Based on your description, everything appears to connect to the LAN.
5. No. See 4.
To repeat myself:
* Do careful, systematic troubleshooting.
* Provide carefully written, detailed description of your network and system configurations when you ask for help.
Good luck!

File copying has slowed to a crawl.

When I try to copy from my home directory to an external hard drive, (about 600mb of data in this instance), it starts to copy in the normal way, saying about a minute remaining, then suddenly stops...
... and waits, while "time remaining" increases.
A short while ago it got as far as saying 40 minutes!! For 600mb!!
I tried to launch my browser while this was happening & it was having none of it.
I tried to launch the "force quit applications" window. Again nothing.
Then I stopped it copying & the other things opened.
It's as if "copying" suddenly asks for more power than the computer can supply & everything else takes a back seat. The copying begins, but at an absolute snail's pace.
If I left if for 40 minutes it would probably copy successfully, but why so slow?
I have about 30GB of data I need to remove from my hard drive before I can do a clean install, but at this speed I don't think I'm going to live long enough!
I've run permissions checks & repairs on all drives concerned. I've run TechTools Pro diagnostics on everything & it's checking out fine.
So what could be the problem?

My problem turned out to be much more extensive than I'd originally realised.
My laptop had a faulty hard drive that needed replacing & the external hard drive seems to have developed a fault whereby it works fine for a while & then slows to a crawl, taking the machine with it. (ie Everything "finder" related seems to slow to a crawl.)
The external hard drive seems to behave itself if it's the only thing on the firewire chain.
Alternatively, if I have the dodgy drive on its own on the Firewire 400 socket & my other external hard drives chained off the Firewire 800 socket the dodgy drive behaves itself.
As soon as I try to copy from one external to the dodgy one it starts to play up, but as long as I just read data from it it's fine.
So I'll get the data off it & stop using it.
I hope your problems are not as extensive.

Title crawl with videos/images in FCE

Hello.
I would like to do a crawl of text credits with small videos or still images crawling inline or beside the text. Is this possible with FCE, specifically with the Boris Title Crawl generator? If so, how do I do it?
Cheers,
Stephen

Do the text crawl first .. estimate how long you want it to be, including the clips/still you need to include. Leave spaces in the crawl when you type it out. Drop that onto V1
On V2 place your clips/still. Match them up to the timing of your crawl. Use motions keyframes to "animate" the clips/stills to move along with the crawl.
This is doable but will take some pre-planning on your part

Photoshop CS5.1 (64bit) slows to a crawl with about 900 layers

Is there a way to fix this?
Graphic drivers are up to date.
Photoshop is up to date.
I cranked up the ram to 20GB in "Performance".
Quick system specs:
- i7 920 @ 3.3 GHz
- 24GB RAM 1600 MHz
- 10K raptor drive
- 6950 2GB

Hello, did you set your performance profile for tall and thin? How large is the file.
The title made me smile, I imagined someone calling the garage with : my car slows to a crawl with 900 kg of load
Do you need all the layers in the same file? Bert Monroy built his humoungous mural by making building blocks that are flattened and composited together. I realize web design or UI design is a layer eater. No smart layers or smart objects that could be brought to another file, and replaced by a flattened copy?

FCE3.5 slowed to a crawl

I've been editing HD footage and have noticed that as the project grows in length it takes longer to render transitions. After adding titles and rendering them, FCE slowed to a crawl, taking almost an hour to render one title. Keyframing is exceeding slow. Why?
I've trashed my preferences and repaired permissions, restarted and opened the project only to find that the rendering process is still working at a snails pace.
What am I doing wrong?
Thanks.

if it was a hardware problem I would think that all my other applications would be effected and they are not
Depending on the apps, not necessarily. Video editing pushes your system pretty hard, and FCE may be particularly demanding on the older PowerPC processors.
You don't say how much free space is on your hard drive; that may be an issue as well. For a 250GB drive, you should keep around 40-50GB free.

Title crawl

I'm trying to get my titles to crawl south to north (or to move @ all)
I hit title crawl button in the viewer and then put in my info and apply but that doesn't seem to do it.
I went into fcp help and am not making much headway.
I'm proficient @ making titles that don't move, now I want to make them move.
What's the work flow?

When you open title crawl, the window no longer opens by itself... you need to click the controls tab in the Viewer, then click on the Boris "options" logo at the top of the Controls tab, this opens the text entry window. Once you've typed and arranged your text there, click "apply". Then in the Controls tab click on the animation popup to select roll... place the clip in the sequence, and follow my earlier instructions.
Jerry

I have an Apple MacBook Pro and when surfing the web my computer will slow to a crawl and I will have a multi-colored spinning wheel visible until my latest request is handled. What is causing this and is there a way to prevent this from occuring

I have a MacBook Pro. When surfing the web it will eventually slow to a crawl. When this occurs, there will be a small multi-colored wheel spinning until my latest command is handled. What is causing this and is there a way that I can modify or prevent this from happening? Is there a setting that will prevent this?

When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Mac 10.6.4 and CS5 - known problems? VERY slow, long freezes

I am on a brand new 12-core (dual 6-core 2.66GHz) Mac Pro with 16GB of RAM (and of course running 10.6.4). I have a new install of CS5 Master Suite (trial version, our box has not arrived yet), and primarily in my explorations with After Effects, it is running PAINFULLY slowly, mostly around simple interface stuff like scrubbing the timeline.
But this was also very apparent during rendering - a project that took about 20 minutes on my old 32-bit Core 2 Duo Dell with 4GB of RAM and CS4 took about 14 minutes on this new one under CS5 (running with 4 cores each using 2GB of RAM, and plenty of cores and RAM left over for other system stuff)... but I could see that a lot of that was due to HUGE delays in processing time as it rendered, long swaths of spinning beach-ball time. Had it not been for those, it likely would have rendered in about 2-3 minutes (as I would expect).
I have installed all available system and Adobe updates as of today (9/28/10), I am now running the updated AE 10.0.1... and I am having the same issues, with AE running very, very slowly. Scrubbing a project is nearly impossible - it regularly sends the system right to the beach-ball for many seconds; opening one project, which took 7-15 seconds on the Windows side (an old 32-bit Core 2 Duo Dell with 4GB Ram and CS4), takes up to 4:30 on the Mac under CS5! Same project, hierarchy, footage, etc.
I tried rendering it several ways: with 2 cores with 3GB each (leaving 6GB and 12 cores for other apps), with 3 multiprocessor cores each with 3GB of RAM (leaving 4GB of RAM and 10 cores for other apps), with 4 cores with 2GB each (6GB and 12 cores allowed for other stuff), with 7 cores each with 1.5 GB (leaving the minimum RAM and cores for other apps) and with NO multiprocessing on at all. Just for the baseline, the old Dell rendered this same file in 23:49, so all of these results are an improvement over that, but not nearly enough! Those long pauses still occurred - while watching the render, I could see it fly through parts, and then choke for many seconds at a time. Here are the timing results:
Multiprocessing Off: 9:57
2 Cores with 3GB each: 14:01
3 Cores with 3GB each: 9:36
4 Cores with 2GB each: 9:12
7 Cores with 1.5GB each: 15:12
This all seems pretty *******' random, though my testing methodology was far from iron-clad, as you can see. But either way, you would think with my system specs more cores would produce better results, not worse. I would have expected the 2 or 3 core configs to produce the best results.
The horrible lags seemed most pronounced on frames that cross faded, even a very simple crossfade - there was only one of significance in my video, where two videos crossfade over the space of about a second; each FRAME of that crossfade appeared to take about 20-30 seconds to render... or more accurately, each frame would render, and then there would be one of the insane processor lags. No lags this bad or pronounced happened on the Dell side - it was slow all around, but consistent.
Now, I did some tests with Activity Monitor open, and discovered some interesting things. When rendering with multiprocessing, each core used for rendering shows up as a process called "aeselflink" (as I'm sure you know), and at least a few of them are always at the top of the list, if you view activity by % CPU.
What was interesting is that while the render was actually processing (I could see motion in the render preview, as opposed to when it was choked), the CPU usage graph looked as you'd expect, going up and down between 5-50% of the CPU use. But when it stalled out and choked on a frame - or whatever it was doing - the CPU usage in the graph would PIN to the top as completely maxed out, with between 98 and 99% of the usage going to % User.
When those lags happened, the aeselflink processes often showed up as EACH using anywhere from 200% to 900% of the % CPU. Sometimes they were all pinned up there; other times only one or two seemed to demand that much time. Sometimes, however, things choked and the CPU usage graph showed NO activity, plain black idle for many seconds at a time. This doesn't seem to reveal much to me, but maybe smarter people can get some info from it.
Also, sometimes when starting a render, the aeselflink processes would show up in the Activity monitor normally, not demanding much time, but for a good long time (1-2 minutes) the main AE application process would show up red, saying it was not responding; during this time, the CPU usage graph showed almost no activity at all, just 0-10% User activity.
Whew. Ok, there's my random smattering of data. I hope this helps give someone in the know a better picture of what's going on here... this is a huge problem if it can't be addressed.
Matt

From the initial description this sounds a lot like the problems I've been having with rendering in After Effects CS5.
I have read a lot online about hyper-threading being the cause and have been adjusting various settings with multiprocessing and turning hyper-threading on and off. So far nothing has been able to give me consistent processor use during renders or reliable render times.
Here are the details of my set up:
Big Bad MF Mac
12 core Mac Pro, 2 x 2.93 GHz 6 core Intel Xeon, 32GB of RAM.
Boot Drive is 1TB
3 additional 2TB Hard drives RAID 0 for a 6TB Media Drive
Mac OS 10.6.4
After Effects 10.0.1
Project details are:
1920x1080, 23.976 FPS
Footage is all uncompressed 4:4:4 AJA Kona 10 bit RGB captured using Final Cut Pro from a Sony F950.
Project Color space is Apple RGB.
Using Keylight 1.2 to Key video and then placing the footage as a 3D layer, with several other 3D layers with 2 spot lights on the footage to generate shadows on the background layer.
Only effects used are Key Light 1.2, Levels, Hue and Saturation.
Output is 1920x1080 Animation codec quicktime at 100%, 48Khz Audio.
Multi processing is enabled. I have experienced the problem with many different settings.
Current settings are:
5GB for other applications
12 CPUs used for other applications
2GB per core.
All source footage is on the RAID. All output files are being written to the RAID.
Renders are amazingly inconsistent. Processor activity and render times are dramatically different when performing render tests with the same composition and identical settings. I regularly get the spinning beach ball and rendering pretty much stops for long periods of time. When watching the processors via activity monitor I have noticed many times that rendering starts out strong, peaking all processors being used regardless of multiprocessing settings. When this is happening the render looks like it is progressing as expected. Then after some period of time, sometimes 2 minutes, sometimes 10 minutes the processor use drops off and rendering slows to a crawl. When this happens the whole computer suffers. I can't even use a web browser.
After extensive testing I have noticed that I have my best luck setting up several items in the render que. Save. Quit. Restart. Turn off hyper-threading after restart via the processor pref pane from Apple. Open After effects and render. The problem will still occur, however if I'm lucky I can get good render performance for 10-20 minutes before the system starts to lag again. This is completely killing my work flow. I don't know what's going to happen from one render to the next.
I know this computer can scream under some situations, but something is terribly wrong here. This computer is not living up the hype on the Apple web site about Apple and Adobe After Effects.
Please help.
I'm going to add some more information just in case some engineer at Adobe gets his hands on this. HINT HINT
I set up a render before I left work last night. It was 7 clips as described above. I forgot to include the scrubbed audio to one of the comps so I went back and re-rendered the clip today. Last night the clip took 33 minutes to render. Today, after a restart and turning off hyper-threading. I opened After Effects, turned off multiprocessing and clicked ok. Then I went back and turned it on with these settings.
5GB for other Apps
12 installed cores (after disabling hyper-threading)
2 cores for other apps and 2GB per CPU.
So yeah, the exact same clip with audio rendered for me today in 5 minutes.
I should have some time today to run some experiments and do some testing. If anybody out there has any suggestions I'm game to try just about anything to help isolate the problem and get it fixed ASAP. I just hope this doesn't turn into one of those bugs where Adobe and Apple just keep kicking it back and forth and nothing ever gets resolved.

MacBook Pro Slowed to a CRAWL after less then a week....

Hello All,
I'm new to Mac. I just got a MacBook Pro last week.
Well, for some reason it has slowed to a crawl....
The dock show/hide and magnify isn't working either. Neither is the "active screen corners" feature on the dashboard. In addition to that, the system does not highlight menu items and show the submenus.
Also when starting applications they take forever to load.
It's acting like it has no ram even though it has 2 gigs and a 2.16 processor. The ram is showing up in the "About this MAC" screen though.
I've tried turning off all startup login items. Nothing is being loaded into memory. I've also tried running the disk utility.... still having the same problems.
I'm new to Mac so perhaps I'm missing something completely obvious.
What would you all suggest is going on, and what do I need to do to fix it?
Thank you
MacBook Pro Mac OS X (10.4.6)

James:
I suspect Wizard's problems resulted from too many widgets and possibly some not quite compatible software. Slowdown can result from lack of free physical RAM, so that Virtual Memory swap files on disk have to be frequently accessed. I don't think he mentioned how much RAM is installed. His symptoms go beyond mere slowdown, however, so I would suspect other software problems as well.
Cutting way back on widgets together with restarting can work wonders sometimes.
OS X handles file fragmentation pretty well, for file sizes up to about 20 MB. It's probably not necessary to run defrag on a Mac unless one wants to clean up a large space for video work. I don't have defrag software. I'd rather wipe the drive (maybe once a year) and reload from a backup drive. I do swear by DiskWarrior, however, and hope they release an Intel version soon. DW does a great job of correcting disk and file errors and optimizes the directory.
Apple has been packing a lot of changes into OS incremental upgrades. To interpret that as comparable to Windows Service Packs probably isn't very accurate. Yes, some bugs are fixed but there have been steady upgrades of core features. Security fixes are often included as well. But I've experienced no stability problems whatever.
Some users recommend using Combo updates instead of using Software Update. I've always used Software Update and have never had a problem. The important thing, either way, is to make certain the operating system and disk directory are 'clean' and trouble-free before and after the update.
I've never had to do an OS reinstall except once, when I was tinkering with System files and slipped up. Routine preventive maintenance works.

My MacBook Pro 2/I7 has suddenly slowed to a crawl. No viruses.

Not much else to say. Worked great up 'til yesterday. Everything is now slow. Thought it was a virus. Bought latest Norton; did scan and no viruses or other related problems.

fishdevon wrote:
I have recently bought the new
27inch iMac
8GB
Mountain Lion
I migrated all my stuff from my old iMac everything working fine so I was a happy boy. However, about 4 weeks later my internet has slowed to a crawl. Slower than dial up it seems.
I did some speed tests over the network on 3 seperate devices and got the following
iPad and iPhone
Upload: 3Mb
Download: 7Mb
iMac
Upload: 0.09Mb
Download: 0.5Mb
As I mentioned, this was 100% fine before today, I have run no updates so far, as none available. I see lots of people on here have been having problems, but they have upgraded to M Lion from previous OS's. Mine was M Lion straight from the box.
It's not just Safari that's slow, it's the app store, Opera, Firefox and Spotify. Everything is very very very slow. I am connected to the network fine. I need help with this. Please help. I'm doing this from work as home iMac couldn't get here!!
Are you running any Anti-Virus/Security software or similar?
Pete

Upgraded to FF4 sites were slow loading or not loading at all - then I discovered it downloads if I keep moving the cursor. If I stop moving the cursor the downloading stops or slows to a crawl again.

Upgraded to FF4 sites were slow loading or not loading at all - then I discovered it downloads if I keep moving the cursor. If I stop moving the cursor the downloading stops or slows to a crawl again. What do I do so no need to keep having to move cursor?THE DOWNLOADING ICON STOPS MOVING UNLESS I KEEP MOVING THE CURSOR AROUND.

Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
Clear the Network Cache
* https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

Boris title crawl missing after converting with Compressor

Not sure where to put this, since it involves two applications, FCP and Compressor.
I have my credits done as a Boris title crawl (roll). They roll up just like credits in the average movie. They're quite long, spanning almost 4 minutes. Some videos are also included in the open space during this title crawl.
When I convert the files for use with DVD Studio, I used the DVD Best quality 90 minutes presets. It performed that conversion without a hitch.
Looking at the video, everything looks great (it's interlaced, of course). No apparent problems, until the end, where the credits should be scrolling: there's nothing. The videos show up, but only one small section of the credits actually show, and it's cut-off.
I checked the credits again in FCP, and they all fit 100% within the inner title-safe overlays. I've never had any trouble with these rolling credits, except for this problem now.
Any ideas what could cause them to almost completely disappear? most of the time the screen is pure black with absolutely NO text whatsoever. Only three lines show up, and they are cut off on both sides (they extend beyond the view of the screen on both the right and the left).
Many thanks to whoever can assist me.

So you're saying I should just export one as a test? Or, what I was thinking is, export the title crawl as a self-contained movie, then import it back into FCP and then send it to Compressor; can't mess it up like it does if it's a strait-up video, right?
Still can't figure out why Compressor would mess it up like that though. Looks perfect when I export the whole movie as a self-contained movie, which I already did twice. I then burned a sample DVD Using iDVD as a test to see how my video looked on the TV screen. Everything was perfect, except a small amount of flickering in some text (but it wasn't enough to bother me).
Yet, sending it to Compressor completely destroys the title crawl, leaving the intermixed videos untouched. Just plain weird...

Need slower/longer title crawl

Similar Messages

Maybe you are looking for