Need SNMP MIB files For Cisco SF 300-48 48-Port 10/100 Managed Switch

Hi All,
I need SNMP MIB files for Cisco SF 300-48 48-Port 10/100 Managed Switch.
I have gone through cisco site but not able to get it.
Can anyone please provide me.I have stuck with this.
Thanks
Ram

Hi Ram, yes the MIB can be used. The switches are essentially the same in many regards (especially on a software level).
I do not know the OID for bandwidth. If you're looking for a particular OID may be this tool helps you
http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=dot1dTpPortTable&translate=Translate&submitValue=SUBMIT&submitClicked=true
-Tom
Please mark answered for helpful posts

Similar Messages

  • SNMP MIB file for Grid Control

    Looking for the MIB file for traps coming out of Grid Control 10gR2. It looks like they're under enterprises.111.15 in the traps I've seen.

    check in AGENT_HOME/network/doc

  • Need to take MIB File for Call Manager

    Hi,
    Can anyone help me how to take MIB file for Call Manager. We have a cluster of 6 CUCM servers (1 pub + 5 Sub). we need this MIB file for monitoring purpose. If you need anyother information regarding this please let me know.

    Hi
    Below MIBs are supported in CUCM.  Refer the link attached for details. Btw which Version are you running ?
    •CISCO-CCM-MIB
    •CISCO-CCM-CAPABILITY
    •CISCO-CDP-MIB
    •CISCO-SYSLOG-MIB
    http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/managed_services/cisco_mibs.html
    Thanks.

  • SNMP MIB file download needed for Laserjet 5550 and 1505n. Paper out, Paper jam etc.

    Please assist me. I need MIB files for SNMP messages like paper out, paper jam, etc. The printers are LaserJet 5550 and 1505n. HP rules.
    This question was solved.
    View Solution.

    Thank you for the help. I found out in a different manner but here it is:
    On the rightmost side you can see the adress and in the middle the data type and name. They are all at position 0.
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PaperJam,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.9
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PaperOut,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.8
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PeripheralError,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.6
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_ConnectionTerminationAck,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.5
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_NewMode,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.4
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_InterventionState,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.3
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_AtBusy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.24
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_TcpBusy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.23
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_LlcBusy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.22
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_NovBusy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.21
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Reserved,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.20
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PaperState,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.2
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PaperOutput,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.19
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Printing,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.18
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_DoorOpen,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.17
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Initialize,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.16
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Wait,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.15
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Busy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.14
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_IoActive,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.13
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_MemoryOut,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.12
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PagePunt,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.11
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_TonerLow,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.10
    syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_LineState,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.1
    I hope it's useful for someone also.
    Best regards to all forum users!
    Cristian

  • 6140 MIB File for SNMP/6140 Monitoring

    Hi,
    i�m looking for a MIB file for 6140 Disk Array. I found only 3510 MIB file, but nothing related to 6140.
    The target of my actual task is setting up monitoring on a 6140 Array from a customer. We are using Big Sister Monitoring Software.
    3510 monitoring was no problem due to the fact that it was easily getting some status infos via Command Line Tool, this has changed since 6140 is using a new kind of management application, which doesn�t seems to give useable output directly (regarding to a colleague) and requires login.
    Any Suggestions e.g. other ways than snmp for monitoring? Status-Sites from the web-frontend?
    Thanks in advance!
    I

    Hi,
    I have the same problem : finding the 6140's mib to identify traps.
    I guess that SUN-SAM-MIB.mib may be the good one, but I'm not sure.
    to get it, I have downloaded StorageTek SAM-FS 4.6 and searched for mibs inside.
    could someone confirm I found the good mib
    thanks
    thomas

  • Trying to find MIB file for 4506

    Hi,
    I am trying to find the MIB files for a cat 4506, after the CPU utiliazation for MRTG.
    Any help appreciated.
    Chris.

    Hi Chris,
    MIB file for CPU utilization is CISCO-PROCESS-MIB. YOu can use the MIB locator for better results. Hope that helps
    http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&mibName=CISCO-PROCESS-MIB
    CISCO MIB locator : http://tools.cisco.com/ITDIT/MIBS/MainServlet?IMAGE_NAME=4500
    Regards,
    Sathvik K V

  • My Lightroom 3 DVD is broken, i need a Download File for Mac. I still have my Serialnumber.

    My Lightroom 3 DVD is broken, i need a Download File for Mac. I still have my Serialnumber.

    Hi Stefan,
    Please go through the link below to download Lightroom3.
    http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml
    Please go through the 'Very Important Instructions' on this page to initiate the download.
    Regards,
    Anand

  • Need driver (*.inf) files for HP OfficeJet 5610 All-in-one

    I am setting up a print server and it needs *.inf driver files for my HP OfficeJet 5610 All-in-one printer. Where can i find them? I've installed the drivers on my PC, but they come as *.exe files that will not extract to give the *.inf files. Can anyone help?

    Hello, First I would like to say that I dont like what HP does, I dont want all your software cloging up my computer. What I want if for the hardware I have purchased from you to work the way I want to. Nothing more nothing less. Please give your customers the chance to pick the software they want and not fill up the pc with trash.
    PlanoStar You will find the x86 inf file in the Windows XP Package, it about an 68mb download, just extract EP-CDB-enu_NB.exe using Winrar.
    And ofcourse after the hours spent, with HP trolling you, you would think you are done. Think again. Microsoft will pick up the tradition with some Install x86 Medea ntprint.inf BS. to solve this problem download the files needed from here.
    It will save you hours instead of mounting AIO images and whatever.
    Ps. I have just registered with HP with the sole reason of making this post, and I would just like to say that hp support is rubbish.

  • Do I need "nilm.exe" file for labview to run properly?

    I have some problems with the "nilm.exe". Sometime it create a lot of other file in Windows tak manager and it lock completely my computer. Do I need "nilm.exe" file for labview to run properly? Can I remove it from my computer ?
    thanks in advance for your reply

    NILM.EXE is the NI License Manager for Remote Panels. If not using Remote Panels then you do not need to use NILM.EXE. The following webpage shows how to disable nilm.exe:
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/581a81c57ac0c10b86256b5a005f2975?OpenDocument
    Chris_Mitchell
    Product Development Engineer
    Certified LabVIEW Architect

  • I need an installation file for officejet pro 8000 series a809 printer

    I need an installation file for officejet pro 8000 series a809 printer

    Just search the web and you will find you answer.
    http://www.google.com/search?q=+officejet+pro+8000+series+a809+&sourceid=ie7&rls=com.microsoft:en-us...
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • New issue , when importing new paid app spreadsheet into Configurator iTunes attempts to download an ipa file for each redeem code .  If you have 100 codes 100 downloads will start. Call enterprise support if you are seeing this issue.

    New issue , when importing new paid app spreadsheet into Configurator iTunes attempts to download an ipa file for each redeem code .  If you have 100 codes 100 downloads will start. Call enterprise support if you are seeing this issue.

    New issue , when importing new paid app spreadsheet into Configurator iTunes attempts to download an ipa file for each redeem code .  If you have 100 codes 100 downloads will start. Call enterprise support if you are seeing this issue.

  • Concurrent voice calls Cisco SF 100D-08 8-Port 10/100 Switch

    how many concurrent voice call can be conducted at once with the cisco sf 100d-08 8-port 10\100 switch?

    Christopher,
    As far as concurrent voice calls we don't have any documentation as to how many it can support.  It is strictly based on the bandwidth for the network as to how many calls it can handle.

  • Need Flash Player MSI for 11.3.300.270 to uninstall it

    Hi, I am using  active directory group policy software installation to push out Flash player to my users. However, I accidentally deleted the MSI file for version 11.3.300.270 which is needed to uninstall another version (11.4.400.xxx) before pushing out the newer version.
    Can anyone out there provide me with a copy of the MSI for 11.3.300.270 I have already found version 11.3.300.273 at the Flash player archive page at http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html but they don't work.
    Any help or suggestions would be appreciated.
    Thanks!!!

    Hi, I am using  active directory group policy software installation to push out Flash player to my users. However, I accidentally deleted the MSI file for version 11.3.300.270 which is needed to uninstall another version (11.4.400.xxx) before pushing out the newer version.
    Can anyone out there provide me with a copy of the MSI for 11.3.300.270 I have already found version 11.3.300.273 at the Flash player archive page at http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html but they don't work.
    Any help or suggestions would be appreciated.
    Thanks!!!

  • Error Compilation MIBs Supported for Cisco UCS C-series software release 1.4(3) and later releases on IBM Director 6.3.2

    Hi,
    I have an IBM director 6.3.2 on a Windows Server 2008R2
    I try to install the MIB for manage Cisco UCS C-460 server.
    I downloaded the mib on the cisco ftp.
    the files extension was my. I cahgne it to .mib. For the moment I success to import some ones.
    But when I try to install Cisco-Unified-Computing-TC-MIB, I have got the error in the join file.
    Ho can I fix this issue...

    Hi,
    I have an IBM director 6.3.2 on a Windows Server 2008R2
    I try to install the MIB for manage Cisco UCS C-460 server.
    I downloaded the mib on the cisco ftp.
    the files extension was my. I cahgne it to .mib. For the moment I success to import some ones.
    But when I try to install Cisco-Unified-Computing-TC-MIB, I have got the error in the join file.
    Ho can I fix this issue...

  • Need new result file for each iteration of a loop

    I am using TestStand 2010 SP1.  I have a main sequence that essentially does the following:
    Initialize the test equipment and set up the test environment [Sequence Call]
    Start Loop
    Run Tests [Sequence Call]
    End Loop
    Because testing can continue for hours, the resultant report file is enormous and difficult to evaluate. I need to create a new result file for each loop iteration.  I know that starting a new execution of “Run Tests” will create a result file for each iteration of the loop, but the new execution will not have access to the handles to the test equipment that were made during initialization.  The testing is time critical, therefore initializing the test equipment and setting up the test environment must occur outside of the loop. 
    How can I programmatically create a new result file at the beginning of the loop and close the result file at the end of the loop?  I am open to any other suggestions.  Thank you in advance for your help!

    Hi,
    You could modify your process model by making a copy of Test UUTs entry point. Then make the loop that usually tests multiple UUTs into your loop. Take the loop and init out of your sequence. You can init in PreUUTLoop or the other pre loop sequence, and maybe store your references in runstate.root.Locals and pass them to MainSequence. Then you can use Report Options to set it for separate report files.
    cc

Maybe you are looking for

  • Table inside table in smartform for pay statement

    Hi friends,                    Here is one requirement of PAY STATEMENT in which all details(includes personal, Attendance, Payroll details) of all employee's of particular month should print in smart form. Client demanding the format in their previo

  • Itunes 10.5 does not detect my ipod touch

    I recently update my itunes to 10.5 and when I connect my Ipod touch to my computer Ituens will not detected. My Ipod will show up on my computer but not on Itunes. Any ideas how can I fix this??? I try restaring my Ipod, REinstalling Itunes but noth

  • Creating custom lookup triggers - Is it possible?

    Hi, Can we create our own custom Lookup trigger something similar to " Lookup.USR_PROCESS_TRIGGERS" ? I wanted to create a lookup for a Form (UD_*) . Or can it be done for any other proceess or table ? Is it possible ? Any guidance would be really he

  • Skype keeps crashing

    Hi Skype keeps on crashing have tried reinstalling several times. See below for problem details. Also please see attachment, any ideas? Problem signature:   Problem Event Name:    BEX   Application Name:    Skype.exe   Application Version:    7.6.0.1

  • ProductPreviewSize and ProductThumbSize in Config Settings : Commerce

    Hi, Can someone advise exactly what the above settings affect in WT? I have tried changing them but have not spotted any difference to my images. The UI refers to 'AutoGenerated' preview images is this comment still relevant and if so what are autoge