Need SNMP oid or object name to monitor temperature for 3560 switch.

hi all
i have 3560 switch loacted in warehouse environments . i need to monitor the temperatue of this switch . i am looking for OID value that serves this purpose
kindly provide me how to look for all OID that give me real time status for FAN .. CPU UTILISATION ...TEMPERATURE ...OR ANY MAJOR EVENT THAT CAN DISRUPT MY PRODUCTIN ..
THANKS

The CISCO-ENVMON-MIB is a good one to look at for these types of queries:
http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2&submitClicked=true&mibName=CISCO-ENVMON-MIB#contents
Have a look at ciscoEnvMonTemperatureStatusValue for temperature.
For CPU utilization:
CISCO-PROCESS-MIB
Memory
CISCO-MEMORY-POOL-MIB

Similar Messages

Revoke the authorization of DB13 need to konw authorization object name

Dear All,
I am facing problem in in Revoke the authorization form a user where i have given sapall in profile.
I need to know the authorization object name so i can revoked it.
Regards,
Kumar

There's no reliable way to 'revoke' anything from SAP_ALL or users having that profile in their user master. SAP_ALL can and should be regenerated on several occasions bij clicking just one button which will erase all changes made to it.
I'm afraid there are very few shortcuts available in SAP security. Have a look at the netweaver forum as this has been discussed there quite often.
Jurjen

Need SNMP OID for MSTP status in Cisco SG300-28MP 28-port Gigabit Max-PoE Managed Switch

Hi,
I have configured redundant network using two Cisco SG300-28MP 28-port Gigabit Max-PoE Managed Switch through MSTP & it's working fine.
I need OID of MSTP status from which I can monitor which Switch is active and which one is in standby mode.
Please help.
Thanks,
Harsha

Hi Harsha,
check these OID's:
http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=1.3.6.1.4.1.9.9.500.1.2.1.1.6&translate=Translate&submitValue=SUBMIT
http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=cRFStatusUnitState&translate=Translate&submitValue=SUBMIT&submitClicked=true
Thanks-
Afroz
**Ratings Encourages Contributors ***

Need SNMP OID of MSTP status for Cisco SG300-28MP 28-port Gigabit Max-PoE Managed Switch

Hi,
I have configured redundant network using two Cisco SG300-28MP 28-port Gigabit Max-PoE Managed Switch through MSTP & it's working fine.
I need OID of MSTP status from which I can monitor which Switch is active and which one is in standby mode.
Please help.
Thanks,
Harsha

Hi Harsha,
check these OID's:
http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=1.3.6.1.4.1.9.9.500.1.2.1.1.6&translate=Translate&submitValue=SUBMIT
http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=cRFStatusUnitState&translate=Translate&submitValue=SUBMIT&submitClicked=true
Thanks-
Afroz
**Ratings Encourages Contributors ***

Search by folder name? Monitor folders for changes?

Im a long time PC user that LOVED how Picasa automatically indexed any locations that I told it to keep track of. I just got Aperture - but so far I am utterly disappointed in the search function.
When I used to import all of my photos the folder that each import would go under would be the events title.
For instance if I shot a wedding I would name the folder "John Smith" because in picasa I could just search for "Smith" and it would have all of the files in that folder as results - regardless of their metadata.
So here I am with a 2 week old Macbook that I love - but I cant find any of the photos that I want to find.
My library has roughly 40K images - so without the ability to search by folder names it takes me forever to find the files I am looking for.
*Surely I am an idiot and just dont know how to search by folder name - can someone enlighten me?*
Also - is it possible for Aperture to monitor certain folders for changes - for instance if I save something to my library folder from photoshop - do I then have to import that one file I just saved? Picasa would just display it under the folder its in - is there any programs for Macs that behave like this?

aperture can indeed search on the project title. a little harder to find in the filter dialog, but it is there.
but again, you'll have to import your data differently than i think you did the first time.
i'm sorry that you're not happy with Aperture doing what you want, but then again, you're upset because it doesn't work with you're old folder structure. Not every application can be expected to be designed for every possible methodology that someone used to manage their existing data. It was set up to be used more visually than your old method and if you can't take the time to organize your photos when you import them to Aperture, then you're right, it probably isn't for you.
i would suggest you watch the tutorial on searching to see all of the additional metadata you can search by, maybe it would help in some way.... but if not, good luck with LR

Changes in resource name in Monitor Matrix for SQL Database @ Azure portal

hi
Exact 4 months after starting of new SQL database tier, Resource Matrix changed.
old names :
CPU percentage
Log Write percentage
Physical Data Read percentage
new names are:
CPU
LogIO
DataIO
My question is they are equal :
CPU percentage = CPU (looks OK)
Log Write percentage = LogIO (Log Writes means IN but IO means both (in and out))
Physical Data Read percentage = DataIO (Read means OUT but IO means both (in and out))
If they are different then what is change ?

Hi,
We use the
sys.resource_stats catalog view to monitor the resource usage of your Azure SQL Database and compare current resource utilization to different performance levels . The CPU Percentage, Physical Data Reads percentage, Log Writes Percentage show the average
utilization percentage relative to the DTU of your database. For more information, see:
http://msdn.microsoft.com/en-us/library/azure/dn369873.aspx
And now, we upgrade the monitor metrics name for CPU and IO activity of SQL Azure database. If you add the metrics of Data IO or Log IO individually in Monitor Page, it will show the same name with Physical Data Reads percentage and Log Writes Percentage,
you can refer to the following screenshot.
After I adding the Data IO, it will show as Physical Data Reads percentage in Monitor Page.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

I need to know if there is any monitoring softwear for my teenager's phone

Is there a program I can install on my teenager's iphone so I can monitor their activity, chats, texts, etc?

Not in any global way, no. You can set up Messages on your own iPhone (or a Mac) to your teen's Apple ID (or whatever settings he/she is using) which would allow you to monitor anything sent via iMessages, but that won't allow you to see SMS/MMS messages. For that you'd have to contact the cell carrier and ask if they have any sort of parental monitoring option. As to web surfing, in iOS 7 there's some limited ways of seeing web browser history, or you could lock off Safari and force the teen to use a third-party web browser that might offer better monitoring (MobiCIP and the McGruff browser come to mind as possibilities). There's nothing that would allow you to monitor the apps the teen is using.
Regards.

Monitoring tool For Cisco Switches

Hi All,
I have installed 2 Core Switches and 9 Access Switches (4960-X,3560-X and 2960-X) in our organisation. Now we are looking for a Monitoring tool.
To monitor the Traffic status, Link status, Quarterly Health Check, etc. for all the switches on a single page.
Can anyone please suggest which Cisco Monitoring Tool will suite our requirement.
Responsses will be highly appreciated.......
Regards,
Maazeem.

Have you had a look at Cisco Prime Infrastructure?
http://www.cisco.com/en/US/products/ps12239/index.html
Are you looking only to monitor Cisco devices or other devices as well? There are other tools available also so it depends on your environment, budget etc.
Daniel Dib
CCIE #37149

Sender CC for MS SQL 2005 Driver error invalid object name

Hello people,
can some one help me with the following problem?
I'm trying to implement a JDBC to IDoc XI/PI scenario with PI 7.1.
In RWB CC monitor i'm getting the following error : "Database-level error reported by JDBC driver while executing statement 'SELECT * FROM SAP_SALES_TRANS_PAYMENTS WHERE TRANSFERRED_FLAG='0''. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name 'SAP_SALES_TRANS_PAYMENTS'.'. For details, contact your database server vendor".
Communication channel configuration:
JDBC Driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
Connection: jdbc:sqlserver://<IP>:1433;databaseName=<DB Name>
Query SQL Statement is : "SELECT * FROM SAP_SALES_TRANS_PAYMENTS WHERE TRANSFERRED_FLAG='0'"
Update SQL Statement: "UPDATE SAP_SALES_TRANS_PAYMENTS SET TRANSFERRED_FLAG='1' WHERE TRANSFERRED_FLAG='0'"
The name of the database is 'SAP_SALES_TRANS_PAYMENTS', is checked. Are the table name and/or table fields names key sensitive?
The MT definition is identical with the data base table.
Thanks Stefanos

Hello,
this issue is solved now.
The problem was in the name of the database table. The Database was created for more then one
company codes (by an other partner company ) and the full/right name in the query is
SELECT * FROM dbo.<company_code>$SAP_SALES_TRANS_PAYMENTS WHERE TRANSFERRED_FLAG='0'
Best regards
Stefanos

Values of Variables as Object names

Hi!
Can a value of a variable be an object name, and how?
For example:
String test = "myname";
JLabel myname = new JLabel();
Is it possible to set the object name for the Label from the value of the String test (here: myname) without explicit typing the name of the Label in the code??
thanks
P.S. excuse my bad english - I hope you understand my question.

how can you dynamically create for example Labels? "new Label(text)" will dynamically create a new Label for you.
I have a database connection and I want to put let's say every value of a column into a new Label.Okay, so you put "new Label(text)" inside the loop that's reading the database. I expect you want to display these labels, so you'd want to add them to some GUI container. Like this: "container.add(new Label(text))".
how do I declare dynamically names for Labels?In the scenario where you just want to display the labels, you don't need to have "names" for them. But if you have some other scenario, like you need to get at the labels and change the text based on something else happening, then you use a Hashtable to store the Labels. You'd use a String as the key (that's your "name") and use the Label as the value. Then you can retrieve the Label from the Hashtable by using its get(key) method.

[jpublisher] how to change object names

Hi all,
please, i really need your help to solve this one...
i'm working with jpublisher and it's working perfectly... but i need to change the objects name that are created by jpublisher. how can i do this?? have any idea???
thanks in advance

Hi,
As per you we assume that this object is master data object for text : 0PROJECT_TEXT
If you define as a Data target you need to load the data from PSA(Data source to Data target) , Here transfermations will come into the picture ( in BI 7.0)
if you are going to load the data in 3.5 flow , transfer rules will come into the picture.
If It is Update rules/ Transfermations try to make it active manually ..
1. Go to RSA1 >>> And find the Data Target >>> Double click on Update Rules
2. Click on Change button, then activate the Update rules.
If it is transfer rules , try make it active by using this program
in SE38 ; RS_TRANSTRU_ACTIVATE_ALL >> Give the source system name >>>>> Info source name to activate the transfer rules as well as transfer structure.
It may help you
Regards.
Rambabu

Pull title from IPTC headline field not IPTC object name

I imported sample images from the IPTC.org site and filename shows up in LR title field because LR fills it's title field from IPTC title/object name field (frequently used for filename) rather than the recommended IPTC Headline field. I think the better practice would be for title in LR to come from the IPTC Headline field and suggest this change. I don't want to put my metadata titles in field other than the correct Headline field.
Thanks, Ralph Daily

>LR fills it's title field from IPTC title/object name field (frequently used for filename) rather than the recommended IPTC Headline field.
Can you give a reference where it is recommended that fields be filled from a different source?
On the surface, this would seem to lead to a lot of confusion. For example, what would happen to existing information in the Title/Object field if your suggestion was implemented? What happens when you synchronize XMP data back to the image?
IMO, the way it presently works is just fine. I use the Title/Object field for the original filename and the Headline field for whatever descriptive text I want. Others may have a different approach. Why should LR scramble the approach we have been using long before LR was around?

Needing to connect my blackberry curve to my laptop for internet service using bluetooth

I have been setting up my internet connection to my laptop throught my bluetooth connection on my phone... I am in need of finding the ISP Name and password information for T-Mobile.. can anyone help?

Hi skelywag and welcome to the BlackBerry Support Community Forums!
If you are trying to use your BlackBerry as a tethered modem, the information your require can be obtained from T-Mobile.
This video may also be of assistance:
http://www.youtube.com/blackberry#p/search/4/PpEydgKHS8M
Thanks!
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

What snmp OID to use to monitor control-plane of router

Hi there!
I've applied policy-maps on control-plane, based on cisco recomandation.
Now i need to know, what snmp OID i've to use to monitor them (i'm using zabbix)
Let me know.
Regards!

If you are using IOS which uses a policy-map to configure Control Plane Policing then you are asking in the wrong place as this forum is for IOS-XR not IOS but you can poll objects in the CISCO-CLASS-BASED-QOS-MIB::cbQosPoliceStatsTable (for example cbQosCMDropByte64, cbQosPoliceExceededByte64, cbQosPoliceConformedByte64).
If you mean you have changed the LPTS policers to help protect the control-plane in IOS-XR then I believe there is currently no support for polling the counters via SNMP. See the section on monitoring in Xander's document https://supportforums.cisco.com/document/93456/asr9000xr-local-packet-transport-services-lpts-copp

ASA 5512 - monitor power supply status via snmp oid

Device – ASA 5512 running 9.1(1).
Show version:
ASA-1# sh ver
Cisco Adaptive Security Appliance Software Version 9.1(1)
Device Manager Version 6.6(1)
Compiled on Wed 28-Nov-12 11:15 PST by builders
System image file is "disk0:/asa911-smp-k8.bin"
Config file at boot was "startup-config"
ASA-1 up 8 hours 38 mins
Hardware:   ASA5512-K7, 4096 MB RAM, CPU Clarkdale 2792 MHz, 1 CPU (2 cores)
            ASA: 2048 MB RAM, 1 CPU (1 core)
Internal ATA Compact Flash, 4096MB
BIOS Flash MX25L6445E @ 0xffbb0000, 8192KB
Issue: looking for a snmp OID to poll power supply status (Inbuilt Power Supply - no redundant power supply in this scenario). Possibly what we see in show environment.
CSE analysis:
I tried using the OIDs belonging to CISCO-ENTITY-FRU-CONTROL-MIB , like cefcFRUPowerOperStatus and cefcFRUPowerAdminStatus but it didn’t return anything.
NOTE: I have done all the snmp walks from the Linux server. Do I doubt it’s something to do from the snmp manager side.
Couple of observations. The CISCO-ENTITY-FRU-CONTROL-MIB talks about the field replaceable power supplies, so I doubt if it’s going to return the value for inbuilt power supply.
Second, I noticed that there are snmp traps supported for power supply and threshold setting. See configuration below. Is it that only traps works for power supply and environment related details?
Snmpwalk on cefcFRUPowerStatusEntry returns nothing:
[root@tonbenso-eagle bin]# ./snmpwalk -v2c -c public 172.16.169.29 1.3.6.1.4.1.9.9.117.1.1.2.1
SNMPv2-SMI::enterprises.9.9.117.1.1.2.1 = No Such Object available on this agent at this OID
Snmpwalk on cefcFRUPowerOperStatus returns nothing:
[root@tonbenso-eagle bin]# ./snmpwalk -v2c -c public 172.16.169.29 1.3.6.1.4.1.9.9.117.1.1.2.1.2
SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.2 = No Such Instance currently exists at this OID
Snmpwalk on cefcFRUPowerAdminStatus returns nothing:
[root@tonbenso-eagle bin]# ./snmpwalk -v2c -c public 172.16.169.29 1.3.6.1.4.1.9.9.117.1.1.2.1.1
SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.1 = No Such Instance currently exists at this OID
[root@tonbenso-eagle bin]#
login as: root
I tried polling the ciscoEntityFRUControlMIB to see what all values it return. It just returned enterprises.9.9.117.1.3.1.0 = INTEGER: 2. Meaning cefcMIBEnableStatusNotification is FALSE (value 2). Meaning cefcModuleStatusChange, cefcPowerStatusChange, cefcFRUInserted, cefcFRURemoved, cefcUnrecognizedFRU and cefcFanTrayStatusChange are prevented from being sent.
Snmpwalk on ciscoEntityFRUControlMIB
[1]+ Stopped                 ./snmpwalk -v2c -c public 172.16.169.29
[root@tonbenso-eagle bin]# ./snmpwalk -v2c -c public 172.16.169.29 1.3.6.1.4.1.9.9.117
SNMPv2-SMI::enterprises.9.9.117.1.3.1.0 = INTEGER: 2
Object
cefcMIBEnableStatusNotification
OID
1.3.6.1.4.1.9.9.117.1.3.1
Type
TruthValue
Permission
read-write
Status
current
MIB
CISCO-ENTITY-FRU-CONTROL-MIB ; - View Supporting Images
Description
"This variable indicates whether the system
produces the following notifications:
cefcModuleStatusChange, cefcPowerStatusChange,
cefcFRUInserted, cefcFRURemoved,
cefcUnrecognizedFRU and cefcFanTrayStatusChange.
A false value will prevent these notifications
from being generated."
Found couple of bugs:
CSCty32558 – but then this is for 5585 and I see it is fixed in 8.4
CSCul90037 – New state
Show snmp-server oidlist:
http://www-tac.cisco.com/Teams/ks/c3/getLargeFile.php?srId=632222409&fileName=20141030-013905_ASA-show-snmp-server-oidlist.txt
Show tech:
Sh run | in snmp:
ASA-1# sh run | in snmp
snmp-server host asa 172.18.123.228 community *****
no snmp-server location
no snmp-server contact
snmp-server community *****
snmp-server enable traps entity power-supply-presence power-supply-temperature -----à I was talking about this trap above
any help will be appreciated.

Hi
I've got an ASA with redundant power supplies. An ASA5585. So I have the need to monitor them. :-) So how can we do it?
Also I've made a SNMP-Walk through the ASA v8.4(2)8 and it doesn't show up any ENV-MIB values. The
1.3.6.1.4.1.9.9.13 tree is not available. Are you shure it's available on the ASA?
Funny is also that the command "show snmp-server oidlist" from the 8.4 configuration guide is not available on the real CLI. I think the documentation guys were faster than the coders. ;-)
Kind regards
Roberto

Need SNMP oid or object name to monitor temperature for 3560 switch.

Similar Messages

Maybe you are looking for