Need Solid evidence: For going from 440 to 490

Hi Gurus,
Need solid evidence to give my boss, for purchasing a 490-2CPU, in place of a 440-4CPU (same RAM).
The requirement is:
1. Database migration from private to Sybase ASA 8.
2. Generation of database from 121MB XMLs
3. Testing performance on hifi databases
m-lennon, stumoor your inputs are very much appreciated!
Thanks,
-Vikrant
References:
http://store.sun.com/CMTemplate/CEServlet?process=SunStore&a mp;cmdViewProduct_CP&catid=120063
http://store.sun.com/CMTemplate/CEServlet?process=SunStore&a mp;cmdViewProduct_CP&catid=104994
(fyi: We get the SUN servers at ~60% cost of the values on this site)

The only Sun documentation I have on these machines is for internal presentation and only accessable through the iForce partner portal. This documentation I would considered internal, so I couldn't share it with you unless you were located in my region EMEA/Sweden and we were working on a solution for you. You should contact your sales office, the staff there will have all the information like this ( probably more if in the US ). Here is a link to the data sheet for the UltraSPARC IIIi:
http://www.sun.com/processors/UltraSPARC-IIIi/IIIi_PBNupdate d.pdf
And here is a link to the UltrSPARC IV data sheet ( architectural white paper ):
http://www.sun.com/processors/whitepapers/us4_whitepaper.pdf
At this time there is no such public information available for the UltrSPARC IV+ your best bet is pre sales. We will be publishing a system overview for a solution that we are working on, I will send you a link to that when we finish it ( about a week ).

Similar Messages

Shortcut for going from Tab to Tab in Safari 4.0.3?

Hello folks,
Is there a shortcut to use for quickly going from open tab to open tab in Safari 4.0.3 without using the mouse to click on the open tab?
Thanks

You're welcome. This tip has nothing to do with the keyboard, but its graphic effect is kind of neat:
To open a tab in a different Safari window, place the pointer over the tab and drag it to another Safari window or to the desktop.
...So a tab can be removed from a Safari window by dragging it out — and then later, in the same way (by first dragging it out of its new Safari window), put back into its original Safari window.
See halfway thru this video (not mine):
http://www.youtube.com/watch?v=MidBLWS7Yag

Need a Advice for move from peoplesoft to SAP BI

Hi Experts,
I am working as a peoplesoft Technical consultant in a MNC past 2 yrs .
I want to change my domain to SAP BI. I need a suggestion.
SAP BI Training already completed. But in my it's not possible for change so please advice how i will highlight in Resume.
So that i will get calls for intv.
Please guide my Guy's.
Regards,
Mohanty.

Hi Yxu,
I see what you mean now. It sounds like you'll need to pull in the tables from various studio databases and also edit some of the native studio application tables to associate the new tables. Unfortunately I've never tried this and don't have any instructions I can share with you. In terms of the portlets, i'm not sure how easy it would be to migrate them. You could upgrade the various WCI instances to 10g then use the migration utility to move the studio portlets to your main wci 10g instance. Or like you said, create new portlets. Keep in mind direct manipulation of your databases can render your product unsupportible by technical support. The more supportable alternative may be to just build all the studio databases and portlets from scratch in the new instance.
Regards,
Ryan

Need Best Practice for Migrating from Solaris to Linux

Hi Team,
We are migrating our Data Center from Solaris to Linux and our EBS 11i, database 10g (10.2.0.5) is 6TB. Please let us know the Best Practice to Migrate our EBS 11.5.10.2 from Solaris to Linux RHEL 5.
we require Database 10g (10.2.0.5) on Linux x86-64 RHEL 5 and Application EBS on Linux x86 RHEL 5. Please let us know for any details.
EBS version: 11.5.10.2
DB version: 10.2.0.5
We have checked the certifications in Oracle support.
Oracle EBS 11.5.10.2 is not certified with Linux x86-64 RHEL 5.
Oracle EBS 11.5.10.2 is certified on Linux x86 RHEL 5.
So we require Database 10g (10.2.0.5) on Linux x86-64 RHEL 5 and Application EBS on Linux x86 RHEL 5.
Thank You.

You can transportable tablespace for the database tier node.
https://blogs.oracle.com/stevenChan/entry/10gr2_xtts_ebs11i
https://blogs.oracle.com/stevenChan/entry/call_for_xtts_eap_participants
For the application tier node, please see:
https://blogs.oracle.com/stevenChan/entry/migrate_ebs_apptiers_linux
https://blogs.oracle.com/stevenChan/entry/migrating_oracle_applications_to_new_platforms
Thanks,
Hussein

Safari preferences: keyboard shortcut for going from pane to pane

Is there a keyboard command that allows to go from pane to pane in Safari 7.1 preferences?
I looked and didn't find any. That would be quite handy indeed…

Well, that's what I feared, Dominic. It solves my question anyway, I'm afraid.
It would have been a darned good thing though. You know, I've been a power user on Mac since the very beginning. And all that time, I've asked myself why there was no consistency in keyboard commands, and why there was no keyboard command at all. I've added a lot of shortcuts using System Preferences, but you can use this trick only if there is a Menu command to begin with. Same thing with Mail, and no doubt with a lot of other Apple apps. But it's such a wonderful machine that I can live with that! :-)
Thanks a lot for taking the time.

I need subscriptions suggestions for communications from and to the US, Ireland, England & France.

I plan to visit Ireland, England and France with my 2 granddauters in July & August. I normally use "Skype to Go" and a subscription on a monthly/3 month basis to communicate with my family in Ireland from the US. What I want to do now for July & August is. 1. Be able to communicate by phone using Landline & Cell from Ireland, England & France to my Family in the US Would I have to have a Skype to Go number in each country that I'm in ( Ireland, England & France) ? 2. In order for my family to communicate from the US with me while I'm in Europe. I will convert the subscription I presently have (for Ireland) to a Europian subscription and authorise my US families phones to use my Skype to Go account that I have in the US.!

mouseweave wrote:
Can I go to the Apple store or would I have to go directly to a phone company?
Apple is not a wireless carrier or reseller.
They only deal with people buying/upgrading devices.
If you want service, go to a carrier.

I need a code for backup from oracle forms 10.1.2.3g

Please if any body can help me that what code will I use to get a backup of my db from forms, I am using 10.1.2.3 version of forms with 10g db.
Thank you.
Hina

Hello,
Backing up a database is not the work of an Oracle Forms user. It has to be done by a Database administrator. There are several ways to backup a DB, cold or hot, with export/import, by copying the datafiles, ...
None of this methods have any relation with Oracle Forms, so have to be launched as external programs.
If the client has those utilities installed locally, you should use the Webutil Client_Host() built-in to start them.
Francois

Do i need a iphone for imessage from my ipod touch?

My daughter just got an ipod touch she wants to text using imessage is an iphone number needed to activate this?

No. But she can only send messages to other iPod touch, iPhone, and iPad users. https://www.apple.com/ios/messages/

Best workflow for going from Final Cut 1080i60 sequence to 720 X 480

Hi:
We have edited HD footage and SD footage into a nice piece and now have to burn a DVD in 720 X 480 or 486... so what is the best plan to make a pristine DVD copy of our sequence without having to change the aspect ratio, or squeeze down images, etc... (using compressor or quicktime compression to dvd studio pro.)
Please inform--I am open to any guidance.
thanks,
yvette

http://discussions.apple.com/search!default.jspa

Going from Pages to EPUB using InDesign?

Is there a guide for going from a Pages document to EPUB using InDesign? The target is a book that is over 105K words for 425 pages.
I am an absolute beginner with InDesign and I was hoping to more finely control the outcome of EPUB generation by using InDesign rather than outputting from Pages using Export to EPUB. Unfortunately, ID isn't quite as intuitive as I had hoped it would be and I've run up against the wall.
Do I load each chapter as a separate document and then collect them as a book file? Or can the book be loaded as one document? I've been trying as one document, but I can't it to appear in the main editing window. (It shows up fine in the story editing, but that gets tedious very quickly.)
Last, while ID creates EPUB files, can it generate a MOBI or AZW file for the Amazon Kindle? I found no references for in concerning ID in the documentation, but thought I'd ask anyway.

Thanks, Steve!
I've already been hand-building the CSS & EPUB files. I was just hoping that InDesign would make it easier. Clearly, that's not the case.
Apple's Pages does a very good job generating an EPUB which only requires a minimal amount of tweaking to the CSS to give it a final polish and further adjustments for e-readers other than an iOS device. Generating the MOBI/AZW for Kindle requires a bunch of jumping through hoops to prepare, which was what I was hoping to avoid.
A few days to release, I have plenty of time get get the ebooks ready.
A good heads up for any competent programmers out there—of which I am not—there is a huge market of self-publishing authors in need of a program that can take a RTF, Word or Pages formatted document and smoothly turn it into an EPUB or AZW file.

Going from NOARCHIVELOG to ARCHIVELOG mode

I am running an Oracle 10g Release 2 10.2.0.2 database on AIX.
Can any body tell me the exacts steps for going from noarchivelog mode to
archivelog mode.
Thanks and Regards,
Asim Naveed.

You must
1 - shutdown db
2 - mount db
3 - ALTER DATABASE ARCHIVELOG
4 - open dbDo not forget to backup the database.

Listening for UncaughtErrorEvents from SubApp loaded by SWFLoader

I can't seem to get my uncaughtErrorEvents listener to fire when attached to the loader.uncaughtErrorEvents or loaded content's loaderInfo.uncaughtErrorEvents when loading a swf via SWFLoader.
I have a main Flex Application ('A.swf') loading a SubApplication (defined in' B.swf') via a SWFLoader and I need to listen for UncaughtErrorEvent from the SubApplication. I'm not able to get my event listeners to be called when I throw an error from within the SubApp ('B.swf').
After reading the asDoc for UncaughtErrorEvent and UncaughtErrorEvents It states that the UncaughtErrorEvent should go through the normal capture, target, and bubble phases through the loaderInfo hierarchy. This doesn't seem to be the case or I'm not understanding the documentation/usage.
I have added an event listener to A.swf's loaderInfo (The 'outter' main app) and also to B.swf's loaderInfo (though the Docs say not to do it here it is part of the event sequence in the capture and bubble phase...) as well as the SWFLoader internal FlexLoader.uncaughtErrorEvent (per Docs) like so:
SWFLoader's internal FlexLoader uncaughtErrorEvents
swfLoader.content.loaderInfo.loader.uncaughtErrorEvents.addEventListener(UncaughtErrorEvent.UNCAUGHT_ERROR, uncaughtErrorFunction );
and the loaded SWF's loaderInfo:
swfLoader.content.loaderInfo.uncaughtErrorEvents.addEventListener(UncaughtErrorEvent.UNCAUGHT_ERROR, uncaughtErrorFunction );
When I throw an Error from the SubApplication (B.swf). Only the 'outter' main app's (A.swf) event listener gets called. Which you expect, at first, if it is in the capture phase, but it isn't in that eventPhase at all. When debugging the eventPhase is in the EventPhase.AT_TARGET phase while being handled by A.swf's LoaderInfo, howeever the ASDoc says the Target phase should be B.swf's LoaderInfo.
Is this a bug between Flash player and Flex where the event isn't flowing correctly as stated in the ASDoc for UncaughtErrorEvent?

Thanks for the reply Alex.
The Outer main swf and the SubApp swf are in different ApplicationDomains (sibilings to each other) so they should not be sharing the class that is throwing the error. I should note that these two Applications are purely based on MX components, this is important later on.
I was originally throwing the error from a Button click handler from B.swf:
<mx:Button label="Throw Error" click="callLater( throwUncaughtError )" />
I was wrapping the handler function in a callLater because without it the error is not caught at all and the default flash dialog console just appears with the error. The A.swf's loaderInfo.uncaughtErrorEvents handler was not even firing unless I wrapped it a callLater.
I realized that Flash Builder's default to link the 4.1 SDK library via Runtime shared libraries was what was causing the A.swf's loaderInfo.uncaughtErrorEvent to fire in the AT_TARGET phase when using callLater. This is because the UIComponent's callLater method queue structure is shared between the two SWFs and therefore inside a function executing off the method queue A.swf's loaderInfo IS the TARGET... explainable, but at first thought that isn't how I'd expect this to work.
I then decided to test this out by setting the SDK library to merge into the code for both A.swf and B.swf and removing the callLater. IT WORKS! B.swf's (the SubApp) loaderInfo.uncaughtErrorEvents handler fires and I prevent the default (flash error console from appearing) and can stopImmediatePropagation so A.swf's loaderInfo.uncaughtErrorEvents handler doesn't fire.
Perfect besides having to merge the SDK libraries into each swf independently.... size killer.
In summary, using the same exact code for A.swf and B.swf:
1. When the SDK libraries are RSL - no UncaughtErrorEvents, neither A.swf's or B.swf's, is called. Instead the default flash error console appears with no chance to handle the uncaught error.
2. When the SDK libraries are Merged into the code - both A.swf's and B.swf's uncaughtErrorEvents will be called, according to the asDoc documented sequence; B.swf's uncaughtErrorEvents in the AT_TARGET phase and A.swf's uncaughtErrorEvents in the BUBBLE phase.
Moreover, if I build a pure Spark implementation everything works even when referencing the SDK libraries as RSL.
Does this indicate a bug in the globalplayer (flash player code)'s logic for handling UncaughtErrorEvents listeners within the loaderInfo hierarchy when the Flex SDK is Shared code between the SWFs?
OR
Since it works in Spark, is it an issue with how the flex2.compiler.mxml.Compiler turns MX based mxml components into generated AS classes (it hooks up the inline event listeners of child UIComponentDescriptor using a generic object and the click function is specified as a STRING and has to use untyped bracket notation to lookup on the UICompoent when adding it as a listener:
new mx.core.UIComponentDescriptor({
              type: mx.controls.Button
              events: {
                click: "___B_Button1_click"
              propertiesFactory: function():Object { return {
                label: "Throw Error"
Where as Spark does this correctly and generates Factory functions for setting up child UIComponents when converting Spark component mxml to AS:
private function _B_Button1_c() : spark.components.Button
    var temp : spark.components.Button = new spark.components.Button();
    temp.label = "Throw Error";
   temp.addEventListener("click", ___B_Button1_click);
    if (!temp.document) temp.document = this;
    mx.binding.BindingManager.executeBindings(this, "temp", temp);
    return temp;
* @private
public function ___B_Button1_click(event:flash.events.MouseEvent):void
    throwUncaughtError()
Sadly, moving to pure Spark would be a big hit is my project's schedule and at this point and likely isn't feasible. I have examples (with view source) built in MX for both the RSL and MERGE cases, I just don't know how to attach them here.
Sorry for the long comments and thanks again!

I have bought Apple TV from USA ...do I need a transformer for voltage as I am going to use it in INDIA

I have bought Apple TV from USA ...do I need a transformer for voltage as I am going to use it in INDIA

Just plug it in. If its the same plug
And remember dont eaty too much curry while watching Apple TV.

Doc for changes needed for RIDC going from folders_g to framework folders?

Greetings,
Is there any documentation on the potential changes that are needed to be made by a RIDC client when going from a folders_g implementation to a framework folders one?

Hi ,
Changes to the code will be on the service side where in the Folders_g service calls need to be replaced with Framework Folders . Documentation for the FF services are :
http://docs.oracle.com/cd/E23943_01/doc.1111/e11011/c08_frameworkfolders.htm#CHDHIHDI
Apart from that I don't think there should be any other major changes that need to be done to the code .
Let me know if this helps you .
Thanks
Srinath

HT4946 I need to print & back-up a series of abusive/threatening SMS (on iphone 5c) for my solicitor. Is there a way to do this which will show the time, date & sender info? How can I preserve (full) SMS data as evidence for future court proceedings?

Does anyone know how to access sms text messages from iphone 5c backup from icloud or itunes? Apparently SMS can be restored so data I need must be stored in backup. I need to print a series of abusive/threatening SMS messages received on my iphone 5c from one sender. I need the time, date & whatever data is stored about source/sender of messages, as well as content. How can I access this data to create a chronological record of the abusive SMS messages and can I preserve the iphone's message log specifically-- so I can access records of these texts without having to restore a back-up? I need to do this to provide evidence for my solicitor and preserve that evidence for future court proceedings, thank you.

http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CMr1..
http://www.ecamm.com/mac/phoneview/

Need Solid evidence: For going from 440 to 490

Similar Messages

Maybe you are looking for