Need solution for 2 plans, seperate bills(1 wifi, 1 DSL), 1 line and broken internet
My brother has a plan with verizon which is the one that uses the wifi router
His wifi router says Model 7500 on the front.
I felt his Internet was too slow for my needs, so I figured I'd get my own plan
Problem 1:
My 6100G modem can only connect to the Internet if I switch off my brother's router.
That's not good.
also...
Problem 2:
When i both the 7500 and the 6100G are turned on, im breaking everyones
Internet connection - including my own.
Double not good. I don't wanna pay for this for a year if I can't use it.
I just need them both to work with the Internet.
I'd rather not get a seperate phone line simply to connect to the Internet and nothing else.
And Id rather the solution not involve hooking the modem with the router.
the router needs to be in the basement since that is where
the computer that has no USB ports and no built-in wifi is located
while me & my PC live on the 2nd floor...
What's my best solution here?
Solved!
Go to Solution.
I am not sure, but here is what I think.
Since you can not have both DSL modems on the same phone line, you must get another phone line.
For example of two phone lines: I used to have 610-868-0000 and 610-868-0001.
Please note: For privacy/security reasons I did not tell you my real phone numbers, in my example..
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.
Similar Messages
-
Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"
I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.
-
Need Solutions for these Errors
<b>Hello Group !
How are you people there.Iam very much thank full to you people for your constant support.
I need solution to these errors:</b>
1.SID missing.
2.Idocs Missing or No Idocs arrived from source
System.
3.Errors in the source system
4.Missing messages at transfer rules or
Update rules.
5.Data sent but not received.
6.Errors in the source system.
Have a nice week end
VijayHi,
1. Missing SIDS : Mostly occurs due to missing master data or if error records are parked and not loaded susequently, or if Master data is not loaded before loading Transaction data. You need to fix these situations.
2. Missing Idocs -Canbe due to idocs getting stuck, rfc connection failures, bad idocs, partner profies missing or deactivated. need to correct these errors on the source side.
3.Source system errors - Jobs on source system failed or are slow.idoc errors. Source system crashing. Problems in generic extractions. Problems with update jobs. Data not getting posted to Delta queues. Data not coming through correctly after DS enhancement. Data posting errors to infostructures are some of the errors you'll face on the source system side.
4. Missing messages again can be due to jobs being slow, processes being killed, or warning messages. Need to treat the warning messages or reset the job.
5. Can be due to IDOC errors. Goto SM58 and push data packets from there on the source system side or due to IDOC errors.
6. Same as 3.
Cheers,
Kedar -
Need Solution for iWeb/QuickTime viewing problem in IE 6 for Windows
When viewing an iWeb page in IE 6 for Windows with a background picture and a QuickTime movie embeded, the QT movie frame will "smear" when the page is scrolled. More specifically, The QT movie frame will not lock into its proper position as long as the page has a background picture selected in iWeb when viewing w/ IE 6 for Windows. Does anyone know of a solution for this? Does this problem still exist w/ later versions of IE for Windows?
By the way, if you don't already know this, changing the Page Background setting back to the default of 'Color Fill' in iWeb and republishing will not correct the problem once a background picture is selected for a page. You have to set the Page Background setting to 'None' and republish. The movie frame will then be locked into place when scrolling the page in IE 6 for Windows.
MBP 17in (1 GB RAM), PB G4 15in, PB G4 12in, iMac G3 Mac OS X (10.4.7) Loyal to Apple since the Apple ][+Someone else posted that you may have to remove the image altogether, publish, then place the replacement image. The images for the background of my newest pages use this as a tiled background successfully.
http://web.mac.com/makentosh/iWeb/tipsfromtheiceberg/Images/background.jpg
I'm not sure how well tiling would work on your page though since it would begin to repeat vertically when you don't want it to (for me, tiling is exactly what I needed). -
I have an old g5 that is on its last legs. I mostly use it for ProTools editing sessions using LE. If I replace it I'm going to be stuck with Mountain Lion or Mavericks which aren't supported by ProTools (Avid) These aren't complex music editing sessions, mostly voice only.
This machine was given to me 8 years ago. No startup disc and it has decided it no longer recognizes any external drive I try to use for Time Machine backup via firewire. That makes disc repair problematic. The CPU is no longer supported by Apple and has topped out at OSX 10.5.8. Other stats PowerMac 11,2 Dual 2.3 GHz PowerPC 2.5 GB Memory
Moving forward I don't need a powerful Mac - just something that will so simple programs and ProTools. I could go Mac Mini or a small laptop,
Does anyone have suggestions for a bandaid solution to carry me for a bit until Avid supports Mavericks? It's pretty nerve wracking to have no back up.
And what would you suggest for a replacement without all the bells and whistles of the G5 or the new circular replacement coming in December.
Thanks for your help.How much free space is on that drive?
What file are you rying o save to it?
I'd turn off TM & see what happens, then maybe afar better backup method than TM...
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/
Or the most expensive one & my favorite, Tri-Backup...
http://www.tri-edre.com/english/tribackup.html -
Need solution for a Reporting Requirement
Hello Experts,
I need design a solution for Report, where in I need to show ageing of Invoice based of Due date of Invoice for last four weeks as explained below:
In cube i have records like this:
Industry Invoice Number Due Date Amount
8111 IV1 13/04/2011 1000
8111 IV2 17/04/2011 1000
Say current week end date is 03/05/2011, now I need to show data for last 4 weeks in report, by calculting what is due at that weekend date e.g. there is no amount due on 12/04/2011, but next week on 19th amount due in 1000, then subsequent week there are 2 Inv. due, amount for 26th is 2000. Similarly there is additional invoice after 26th, so amount on 3rd remains the same i.e. 2000.
Industry Week End date AR Amount due
8111 12/04/2010 0
8111 19/04/2010 1000
8111 26/04/2010 2000
8111 03/05/2010 2000
Please let me know what is the best solution to achive this, as data volume would be high i.e.
1. In Bex query, is this can be done, if yes how?
2. Or we need to do this in EDW, by having additonal cube, if yes how?
Please let me know if you have solution for this.
Regards,
VipulHi All,
Thanks for the replies.
Please tell me if I can call a file sender communication channel from an UDF and pass the dinamic configuration values at runtime.
If this is possible, I think the above requirement is addressed.
Please tell me in case of any more solutions too.
Thanks once again.
Regards. -
I need solution for this query
hi all,
could anyone please send me solution for this query these are the database tables am having
TABLE NAME :USERS
ATTRIBUTES
UNAME
PASSWORD
GROUPNAME
TABLE NAME:GROUPS
ATTRIBUTES
GROUPID
GROUPNAME
my requirement is that i need 2 acces the groupname of a particular user and the reamining groups to which i doesn't belong in A SINGLE QUERY
my result needs to be like this
Authorised group
consultant
UNAuthorised groups
sales
vender
recruiter
admin
if any body got the solution please sendhi All,
I have 3 tables 1)PREVILEGES (groupname, previleges(values y or n only))
2)GROUPS (groupid, groupname)
3) USERS (uname, groupname).
Here each user belongs to one group, each user hav a default previlege means example if user is consutant then he can access only consultant group. Means default previlege will be used. For default previleges, there is no record in Previleges table.
The Problem is that, I need to reterive the groupname from users which de doesn't belong as well as his previleges from previleges, If there is no values in previleges in the table it should return n. or value what is therey.
the different groups are
SALES,CONSULTANT,VENDER,RECRUTER,ADMIN -
Premiere Elements 7: Need Solution for wave_warp.aex crash
Hello,
I have installed Premiere Elements 7 without problems on my XP-Home PC.
First startup runs some time and loads several files, then suddenly keeps
loading wave_warp.aex for approx. 2-3 seconds, then black screen and reboot.
Tried several times to start PE7, same effect.
Found a solution in kb 403002, but on the download page it states, that this patch is for Vista only. Cannot find a patch for XP.
I downloaded and installed the patch, it did not solve the problem. Maybe it's really for Vista only.
Please help, what can I do?Hello,
I have a Dell XPS/Dimension 400/9150 running Windows XP Media Center Edition. I also have purchased Premier Elements 7 and Photoshop Elements 7 as a bundled package.
I have checked the minimum system requirements and happy to report that my system exceeds the minimum requirements to install and run PE7.
Unlike Piku I have never been able to run PE7. Whilst in the loading module and reaching Wave_Warp.AEX the program stops for about 10-20 seconds, then a dialogue box appears with the words, Abobe Premier Elements 7.0 has encountered a problem and needs to close. We are sorry for the inconvenience
I have formatted the hard drive twice and reinstalled PE7...no success
I have downloaded the latest audio drivers...no success
I have created another user account with administrative controls and re-installed PE7...no success
I have downloaded the patch kb 403002...no success
I have followed every instruction in document kb404997 (troubleshoot system errors)...no success
I have stopped all non essential programs (including firewall etc), re-installed PE7...no success
Have contacted Adobe technical support and was advised that PE7 is not compatible with Media Center...yet the box and the read me file advise otherwise.
I have uninstalled and installed PE7 so many times that I cannot remember how many times...no success
Any other suggestions?
Cheers
Mossie -
i want solution for shape & append query as run in access for oracle
RS.Open "SHAPE {select ID,MAX(Module_Name) AS MainMenu from USER_MODULE GROUP BY ID} APPEND ({select ID,NAME,USER_module.srno,iif(right(param_str,1)='P','ü','') as Allow,iif(left(param_str,1)='A','ü','') as Ins,iif(MID(param_str,2,1)='E','ü','') as Edit,iif(MID(param_str,3,1) = 'D','ü','') as Del,flag,CODE,NAME from USER_MODULE left join user1 on user1.srno=USER_module.srno where user_name='" & Master_Rst!USER_NAME & "' or user_name is null} RELATE ID TO ID) AS AA", G_CompCn, adOpenDynamic, adLockOptimisticIf you are in migration from one DB to other - you should not go with one to one convertion.
First understand the business requirment - whats working and how is it working and whats expected out of your new code etc.
Then decide what to place and how using your new DB.
There might not be one to one exact match in all DBs.
Simple example if you find any connect by prior in oracle - can you replace it with simple SQL command in ACCESS / SQL SERVER as it is without any functions? -
Need solutions for Budget, Landed cost and difference in 2005b and 2007B
Hi all,
Need help for the following scenarios
1. How to define budget for Purchase order and cost centers
2. Landed Cost in SAP B1 2007 how do we do? I am getting an error message stating that Landed cost allocation account is not defined....
3. Difference in 2005B and 2007B
Regards
ShashiThankyou Jasper,
Landed cost problem has been solved.
Regarding Budget set up My client need Budget at costcenter level. i.e Cost center wise they want the budget. As of my knowledge to do this we need to activate Account segmentation right?
Without doing that is there any other way where we can set Budget cost center level also?
one more thing, there is a check box of purchase order, Goods Receipt and Accounting at the time of setting up Budget in General setting? what it is for?
Regariding difference in 2005b and 2007B I was not able to get documentation on this.
Regards
Shashi -
Need solution for dynamic pick lists in Crystal Reports
Does anyone have a good solution for creating a dynamic pick list for a Crystal Report that is based off of a BW Query without having to use a BW user input variable? In many cases it is not practical to use a BW variable to generate a dynamic pick list due to the high number of possible member values and the highly dynamic nature of the particular characteristic (customers, materials, etc.). In my understanding the LOV Server is not an option when dealing with SAP BW. Anyone else running into this issue with Crystal and SAP BW?
Hi Mike,
we once solved this by creating LOVs in BusinessView Manager. I am not sure if you can use the BW Publisher in this scenario as we did not use it. We published the reports directly to the BOE server for some reasons.
Creating a LOV in BusinessView manager is really easy. You can create cascading prompts, shedule refreshing of the lists, ...
By using the cascading prompt feature you can make prompts like this:
First enter the customer number (or pick it from a list) and then the second list, which holds the materials only has shows the ones which had been purchased by that customer. I think this is what you are looking for.
You should give it a try!
Thorsten -
In one of our windows machine( OS : Windows Server 2008 Standard (Service Pack 2)-32bit), we are facing TIME_WAIT in all the TCP/IP ports and it is not getting closed.
On analyzing the issue, we found solution for this from the below link,
https://support.microsoft.com/en-us/kb/2553549
In this page, we are able to get the hotfix for Windows Server2008 R2 SP1 but i can't able to get for Windows Server 2008 Standard SP2(32bit). If we try to apply the hotfix vailable for SP1, it is showing "The update does not apply to your System".
Kindly provide us the solution for solving TIME_WAIT issue in the machine.
OS Details : Microsoft Windows Server 2008 Standard
Version : 6.0.6002 SP2 Build 6002
System Type : 32 bit(x86-based PC)
Awaiting for the response.
Thank you,
Pushpalatha.ADownload correct version from Microsoft Update Catalog. Run it with elevated rights.
M. -
Need Solution for this Scenario......
Hi All,
I am giving the scenario:
For Indian operation we have two set of books, one is for direct billing to the customers in India and the other is shipping to India and billing from Bangalore/Bombay or other branches. Though India operation is single, still for the operation purpose it should be considered as two entity/two Company. Similarly the service company under the group also has the same kind of operation structure.
How this can be done in SAP........
Thanks in Advance,
Subah JoSome of the container/app server vendors offer such tools. You should start by posting your question to the specific container/app server forum.
-
Need solution for multiple Firewire needs
My new 27" 2011 imac will arrive next Monday. I'm now trying to define and solve all potential hurdles.
I seek recommendations on how to best solve my need to attach 2 original firewire cables, into this imac that only comes with 1 firewire 800 input. Both connectors are critical to my work. One connector will turn hard to the right for about six feet to connect to my Digi02 audio interface. The other cable connects and turns hard to the left for 15 feet to connect to my Epson 2200 art printer. Both of the outboard equipment need the original firewire.
I have considered daisy chaining the audio interface and the printer. Except they are on opposite sides of my studio, and I prefer NOT to use a 25 foot firewire cable between such critical peices of hardware.
A better possibility may be a firewire hub, although it will probably also need adaptors for the different versions of firewire i need. That seems rather inelegant. Another possibility would be to get one USB to firewire adaptor and one firewire to 800 adaptor. Do these USB to firewire adaptors work OK?
Anyway, which of these methods would you recommend as my best choice? Are there other choices i haven't mentioned here?The guy is totally correctin his review.
That is how FireWire works. The FireWire bus will run only as fast as the slowest device on the bus. So as soon as plug in a FW400 device, everything is then clocked down to 400FW.
If you need to have both FW800 and FW400 devices running at their native speeds you need two FW busses each with their own controller.
Because of the limited expansion capability of the iMac, I don't see any way for you to get around this limitation.
If you get a Mac Pro then you could use a FW PCIe card for the second bus and controller.
Allan -
Need solution for opening multiple connection to server in parallel
Hi..
I have used URL and URLConnectin classes to open connection to server,
and i used URLConnection.getInputStream( ) to download HTML pages.
Now my requirement is to open more than one connecton to single HTML document and download the file in parallel.
for example, if the HTML file size is 60KB..then i open three connection and
connection 1 downloads first 20KB
connection 2 downloads second 20KB
connection 3 downloads final 20KB
all the above should be done in parallel....by threading or else..
first of all i want to know is it possible to do the above in java?
anybody having solution for the above requirement?
venuhi,
i too have the same problem
actually i am designing a download manager ,and had the same problem
that how to put multiple threads for doing it ,,,,
have u got solution for it..
if so please help me..
my mail id is [email protected]
i want help in designing the download manager
can any one help me out plzzzzzzzzzzzzzz
bye
Maybe you are looking for
-
Phone : IPhone 6 OS : 8.1 Problem Statement : Multiple Selection of Recipients while drafting New Message in SMS. Expected Solution : Checkbox should have been provided to select multiple contacts using one screen
-
Hi Could u pls explain whats the use of these terminology in SAP and what's the prequisites, configuration setting and how these worked. thanks
-
Hi Expert, We would like to customize Cash Desk Receipt (SAP ISU). SAP default Application form for receipt is FI_CA_PAYMENT_RECEIPT_SAMPL_SF and its form class FI_CA_PAYMENT_RECEIPT. We want to build a customize receipt of the same class FI_CA_PAYME
-
How can I disable wireless admin privileges to the router ?
I am using an Airport Utility for Windows for Airport Extreme. For the sake of better security, how can I disable wireless admin privileges to the router so that the router can only be configured via hardwire connection?
-
My computer shuts down after being unplugged
My powerbook G4 sometimes shuts down when I unplug it, even though the battery is fully charged. This seems to happen more often when I unplug it and then pick it up (or put it down). After I restart it, the clock and date have been reset to 1970. An