Need solution for auto-fit problems

I've got a form with 7 text boxes that I'm looking to get copy to auto-fit properly. I'd also like to flow the content without having to start from scratch with a new form.
Here are my problems:
- "Expand to fit" is grayed out for both the height and width on every text box.
- "Allow page breaks within content" and "Keep with next" are also grayed out on every text box.
- I also have "make fixed-size text object auto-fit while editing" checked to perform in my options and it's not doing that at all.
HELP!!!! Thanks.
Gabriel Daigle

Tried this. Didn't work. All those items mentioned previously, as well as anything having to do with subforms, are grayed out. Even tried a new document with flowable layout, added text boxes, and everything is still grayed out. Any other solutions out there?

Similar Messages

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

Buy my problem of camels Store Lee games possible solution for me my problem?

Buy my problem of camels Store Lee games possible solution for me my problem?

This worked for me, sort of. A while back when I downloaded that windows update that installed the new version of IE, I noticed that IE wouldn't connect to the internet and pages wouldn't load. However, I thought nothing of it because I use Firefox and FF was working just fine.
I went into IE earlier this evening (it still wasn't working) and tried to follow your recommended steps. I got up to step 4 and IE froze. I tried closing it, reopening it and repeating the steps but it would always freeze at step 4. In another thread, someone was saying that iTunes released a security update and that fixed the store for them so I tried opening Apple Software Update and that froze. I tried it several times, nothing. Would always freeze. I even tried updating thru iTunes and IT would freeze.
Finally, I went to the control panel and uninstalled IE7. The iTunes store and the Apple Software Update program are now working! So thank you very much for your suggestion. Otherwise, it may have never clicked with me that IE was the problem.
Windows XP

Tried the posted solution for the RETR problem and it works once then it returns. How do you make the change permanent?

Tried the posted solution for the RETR problem and it works once then it returns. Once the email dl'ds the file deleted per the instructions returns. How do you make the change permanent?

Hi DOC808HI
# I don't know what you mean by "posted RETR solution". Could you please post a link to the suggested solution? Perhaps you are referring to this thread: https://support.mozilla.org/en-US/questions/991792 ?
# Anyhow any further troubleshooting information you can provide will be great e.g. Your Operating System Version (XP, 7, Mac OS X Mavericks), your anti-virus if any, your mail provider, your ISP, what you did, what happened with exact error message, what happened
Cheers!
...Roland

Pls i need help for this simple problem. i appreciate if somebody would share thier ideas..

pls i need help for this simple problem of my palm os zire 72. pls share your ideas with me.... i tried to connect my palm os zire72 in my desktop computer using my usb cable but i can't see it in my computer.. my palm has no problem and it works well. the only problem is that, my desktop computer can't find my palm when i tried to connect it using usb cable. is thier any certain driver or installer needed for it so that i can view my files in my palm using the computer. where i can download its driver? is there somebody can help me for this problem? just email me pls at [email protected] i really accept any suggestions for this problem. thanks for your help...

If you are using Windows Vista go to All Programs/Palm and click on the folder and select Hot Sync Manager and then try to sync with the USB cable. If you are using the Windows XP go to Start/Programs/Palm/Hot Sync Manager and then try to sync. If you don’t have the palm folder at all on your PC you have to install it. Here is the link http://kb.palm.com/wps/portal/kb/common/article/33219_en.html that version 4.2.1 will be working for your device Zire 72.

Need Solution for iWeb/QuickTime viewing problem in IE 6 for Windows

When viewing an iWeb page in IE 6 for Windows with a background picture and a QuickTime movie embeded, the QT movie frame will "smear" when the page is scrolled. More specifically, The QT movie frame will not lock into its proper position as long as the page has a background picture selected in iWeb when viewing w/ IE 6 for Windows. Does anyone know of a solution for this? Does this problem still exist w/ later versions of IE for Windows?
By the way, if you don't already know this, changing the Page Background setting back to the default of 'Color Fill' in iWeb and republishing will not correct the problem once a background picture is selected for a page. You have to set the Page Background setting to 'None' and republish. The movie frame will then be locked into place when scrolling the page in IE 6 for Windows.
MBP 17in (1 GB RAM), PB G4 15in, PB G4 12in, iMac G3 Mac OS X (10.4.7) Loyal to Apple since the Apple ][+

Someone else posted that you may have to remove the image altogether, publish, then place the replacement image. The images for the background of my newest pages use this as a tiled background successfully.
http://web.mac.com/makentosh/iWeb/tipsfromtheiceberg/Images/background.jpg
I'm not sure how well tiling would work on your page though since it would begin to repeat vertically when you don't want it to (for me, tiling is exactly what I needed).

Need Solutions for these Errors

<b>Hello Group !
    How are you people there.Iam very much thank full to you people for your constant support.
I need solution to these errors:</b>
     1.SID missing.
     2.Idocs Missing or No Idocs arrived from source
        System.
     3.Errors in the source system
     4.Missing messages at transfer rules or
       Update rules.
     5.Data sent but not received.
     6.Errors in the source system.
    Have a nice week end
    Vijay

Hi,
1. Missing SIDS : Mostly occurs due to missing master data or if error records are parked and not loaded susequently, or if Master data is not loaded before loading Transaction data. You need to fix these situations.
2. Missing Idocs -Canbe due to idocs getting stuck, rfc connection failures, bad idocs, partner profies missing or deactivated. need to correct these errors on the source side.
3.Source system errors - Jobs on source system failed or are slow.idoc errors. Source system crashing. Problems in generic extractions. Problems with update jobs. Data not getting posted to Delta queues. Data not coming through correctly after DS enhancement. Data posting errors to infostructures are some of the errors you'll face on the source system side.
4. Missing messages again can be due to jobs being slow, processes being killed, or warning messages. Need to treat the warning messages or reset the job.
5. Can be due to IDOC errors. Goto SM58 and push data packets from there on the source system side or due to IDOC errors.
6. Same as 3.
Cheers,
Kedar

I need solution for this query

hi all,
could anyone please send me solution for this query these are the database tables am having
TABLE NAME :USERS
ATTRIBUTES
UNAME
PASSWORD
GROUPNAME
TABLE NAME:GROUPS
ATTRIBUTES
GROUPID
GROUPNAME
my requirement is that i need 2 acces the groupname of a particular user and the reamining groups to which i doesn't belong in A SINGLE QUERY
my result needs to be like this
Authorised group
consultant
UNAuthorised groups
sales
vender
recruiter
admin
if any body got the solution please send

hi All,
I have 3 tables 1)PREVILEGES (groupname, previleges(values y or n only))
2)GROUPS (groupid, groupname)
3) USERS (uname, groupname).
Here each user belongs to one group, each user hav a default previlege means example if user is consutant then he can access only consultant group. Means default previlege will be used. For default previleges, there is no record in Previleges table.
The Problem is that, I need to reterive the groupname from users which de doesn't belong as well as his previleges from previleges, If there is no values in previleges in the table it should return n. or value what is therey.
the different groups are
SALES,CONSULTANT,VENDER,RECRUTER,ADMIN

Does anybody have a solution for the NAT problem?

Is somebody's application or Applet able to play any RTP stream behind a NAT Router? Can anybody establish any kind of connection / broadcasting between two subnets? I've got my RTP-Transmitter@public IP (using RTPManager...SendStream.start()), and I try to receive the stream from my local network which is behind a router (DHCP: 192.168....).
I read forums, newsgroups, looked for any solution for days all over the web but I've found nothing. Zero.
What's the secret? Any hints?
Best regards from Munich / Germany,
r.v.

Hi
I have the same problem.
I have one appletTransmitter that capture video from webcam and transmit it to other client on internet.
I try to transmit medialocator from appletTransmitter to servlet1 and then save MedialLocator as servlet attribute, then other client can connect to servlet2 that send saved MediaLocator to appletClient.
APPLETTRANSMITTER:
URL url=null;
MediaLocator media=new MediaLocator("vfw://0");
try{
url = new URL("http://localhost:8080/servlet1");
catch(MalformedURLException mue){mue.printStackTrace();}
URLConnection conn=null;
try{
conn = url.openConnection();
catch(IOException ioe){ioe.printStackTrace();}
conn.setDoOutput(true);
OutputStream os=null;
ObjectOutputStream oos=null;
InputStream in=null;
ObjectInputStream iin=null;
MediaLocator mResp=null;
String r=null;
try{
os=conn.getOutputStream();
oos=new ObjectOutputStream(os);
oos.writeObject(media);
//oos.writeObject("Prova Servlet");
oos.flush();
catch(IOException io){io.printStackTrace();}
catch(ClassNotFoundException cn){cn.printStackTrace();}
SERVLET1
ObjectInputStream objin = new ObjectInputStream(request.getInputStream());
MediaLocator ml =null;
try{
ml = (MediaLocator) objin.readObject();
context.setAttribute("media",ml);
catch(ClassNotFoundException e)
{e.printStackTrace()}
But on servlet1 there is a ClassNotFoundException: MediaLocator
What do we think about the solution and exception problem?
Best Regards,
Nico from Italy

A solution for iTunes install problems

I upgraded to the latest ver of iTunes and immediately had ALL the problems posted all over the 'net.
The following is what worked for me.
BACKUP!!! Set a Restore Point. Back up your REGISTRY. It is critical that you back it up beforehand and use caution while cleaning it. Please do this in case everything goes T. U.
Remove all references to iTunes, iPod and Quick Time. There are literally thousands and you must get rid of all of them.
Find, download, install a copy of jv16 Power Tools.
Then:
1. BACKUP! Set Restore Point! Back up your Registry! Did I mention backing up?
1a. Be very careful cleaning out the Registry. Take your time. Go slowly. Make sure that what you delete is only iTunes-related. Check twice before deleting. Take. Your. Time.
1b. The Registry is your PCs mind; do not scramble it. You will be sad.
2. Using jv16s Software Manager, uninstall iTunes, iPod and Quick Time.
3. Using jv16s Registry Finder, one at a time, search for and delete ALL references to iPod, iTunes, Quick Time and Apple Computer (BE CAREFUL; it will give you references to various 'applets" and "appletalk"; do NOT delete those. Only Apple Computer stuff.)
4. Using Microsofts Search function, search for all remaining references to iTunes, iPod, Apple Computer (leave applets alone) and most importantly-Quick Time.
5. When you are certain that everything that says Apple Computer, Apple, iPod, iTunes and Quick Time exists no more on your PC, Reboot.
6. Go to www.old-software.com and download an old copy of iTunes. The one that finally worked for me was iTunes v 6.0.5
7. Install an old version of iTunes. DO NOT USE THE LATEST VERSION OF iTUNES! Thats what caused the problems in the first place.
8. Reboot.
Even though you previously "uninstalled" iTunes, probably using the Add Remove Programs application in Control Panel, there remains behind thousands of pieces, parts and references to iTunes and Quick Time, in the Registry, TEMP files, Documents and Settings (Application Data and Local Settings), in Windows/system32 and a hundred other places. You gotta get rid of it all.
Quick Time seems to be the main culprit, but in the end I had to get rid of all traces of all of the Apple applications before I could install again and get it to work.
It took me 3 days to figure out this procedure but once I did, it took only an hour to do it.
I've seen a couple other procedures recently posted here that look good. If you are uncomfortable with going into the Registry, try one of those others first.
And fer cryin' out loud, Apple. Yank the latest version of iTunes off your site. I did a Google search for "iTunes installation problems" and came up with 700,000 hits. Do ya think you might have a problem?
Windows XP Try testing your upgrades before releasing them!

Im trying your method right now, when im finished ill let you know how it worked out. I agree with your comment on apple needing to pull the latest version and get a version that actually works.

Need help for access list problem

Cisco 2901 ISR
I need help for my configuration.... although it is working fine but it is not secured cause everybody can access the internet
I want to deny this IP range and permit only TMG server to have internet connection. My DHCP server is the 4500 switch.
Anybody can help?
         DENY       10.25.0.1 – 10.25.0.255
                          10.25.1.1 – 10.25.1.255
Permit only 1 host for Internet
                10.25.7.136 255.255.255.192 ------ TMG Server
Using access-list.
( Current configuration )
object-group network IP
description Block_IP
range 10.25.0.2 10.25.0.255
range 10.25.1.2 10.25.1.255
interface GigabitEthernet0/0
ip address 192.168.2.3 255.255.255.0
ip nat inside
ip virtual-reassembly in max-fragments 64 max-reassemblies 256
duplex auto
speed auto
interface GigabitEthernet0/1
description ### ADSL WAN Interface ###
no ip address
pppoe enable group global
pppoe-client dial-pool-number 1
interface ATM0/0/0
no ip address
no atm ilmi-keepalive
interface Dialer1
description ### ADSL WAN Dialer ###
ip address negotiated
ip mtu 1492
ip nat outside
no ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication pap callin
ppp pap sent-username xxxxxxx password 7 xxxxxxxxx
ip nat inside source list 101 interface Dialer1 overload
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 10.25.0.0 255.255.0.0 192.168.2.1
access-list 101 permit ip 10.25.0.0 0.0.255.255 any
access-list 105 deny   ip object-group IP any
From the 4500 Catalyst switch
( Current Configuration )
interface GigabitEthernet0/48
no switchport
ip address 192.168.2.1 255.255.255.0 interface GigabitEthernet2/42
ip route 0.0.0.0 0.0.0.0 192.168.2.3

Hello,
Host will can't get internet connection
I remove this configuration......         access-list 101 permit ip 10.25.0.0 0.0.255.255 any
and change the configuration ....      ip access-list extended 101
                                                            5 permit ip host 10.25.7.136 any
In this case I will allow only host 10.25.7.136 but it isn't work.
No internet connection from the TMG Server.

Need solutions for Budget, Landed cost and difference in 2005b and 2007B

Hi all,
Need help for the following scenarios
1. How to define budget for Purchase order and cost centers
2. Landed Cost in SAP B1 2007 how do we do? I am getting an error message stating that Landed cost allocation account is not defined....
3. Difference in 2005B and 2007B
Regards
Shashi

Thankyou Jasper,
Landed cost problem has been solved.
Regarding Budget set up My client need Budget at costcenter level. i.e Cost center wise they want the budget. As of my knowledge to do this we need to activate Account segmentation right?
Without doing that is there any other way where we can set Budget cost center level also?
one more thing, there is a check box of purchase order, Goods Receipt and Accounting at the time of setting up Budget in General setting? what it is for?
Regariding difference in 2005b and 2007B I was not able to get documentation on this.
Regards
Shashi

Need solution for a Reporting Requirement

Hello Experts,
I need design a solution for Report, where in I need to show ageing of Invoice based of Due date of Invoice for last four weeks as explained below:
In cube i have records like this:
Industry       Invoice Number      Due Date      Amount
8111                   IV1                  13/04/2011 1000
8111                   IV2                  17/04/2011 1000
Say current week end date is 03/05/2011, now I need to show data for last 4 weeks in report, by calculting what is due at that weekend date e.g. there is no amount due on 12/04/2011, but next week on 19th amount due in 1000, then subsequent week there are 2 Inv. due, amount for 26th is 2000. Similarly there is additional invoice after 26th, so amount on 3rd remains the same i.e. 2000.
Industry    Week End date AR Amount due
8111     12/04/2010     0
8111     19/04/2010     1000
8111     26/04/2010     2000
8111     03/05/2010     2000
Please let me know what is the best solution to achive this, as data volume would be high i.e.
1. In Bex query, is this can be done, if yes how?
2. Or we need to do this in EDW, by having additonal cube, if yes how?
Please let me know if you have solution for this.
Regards,
Vipul

Hi All,
Thanks for the replies.
Please tell me if I can call a file sender communication channel from an UDF and pass the dinamic configuration values at runtime.
If this is possible, I think the above requirement is addressed.
Please tell me in case of any more solutions too.
Thanks once again.
Regards.

Need solution for opening multiple connection to server in parallel

Hi..
I have used URL and URLConnectin classes to open connection to server,
and i used URLConnection.getInputStream( ) to download HTML pages.
Now my requirement is to open more than one connecton to single HTML document and download the file in parallel.
for example, if the HTML file size is 60KB..then i open three connection and
connection 1 downloads first 20KB
connection 2 downloads second 20KB
connection 3 downloads final 20KB
all the above should be done in parallel....by threading or else..
first of all i want to know is it possible to do the above in java?
anybody having solution for the above requirement?
venu

hi,
i too have the same problem
actually i am designing a download manager ,and had the same problem
that how to put multiple threads for doing it ,,,,
have u got solution for it..
if so please help me..
my mail id is [email protected]
i want help in designing the download manager
can any one help me out plzzzzzzzzzzzzzz
bye

Cisco Solution for FXO Disconnect Problem

I have Panasonic PBX-->FXO-->1751V------WAN-----1751V-->FXO--Panasonic PBX. I am facing a serious problem with FXO on both ends becoming busy after some few initial calls.
What is the exact Cisco solution for this FXO disconnect problem? I have read and applied some Netpro tips for similar case but none could help.
Can we have Cisco expert explain this??

Hello, I think this url may be helpful:
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml
Regards.

Need solution for auto-fit problems

Similar Messages

Maybe you are looking for