Need solution for flashback option

Dear all,
Can any one tell me, How to know the previous current_scn value in the databasae... Here i am facing the problem with one table that i have modified wrongly i have to revert back to the previous stage i.e 2 hrs before...
with regards,
Bala

Hi,
You can use TIMESTAMP_TO_SCN function to identify the scn at that point of time i.e 2 hours back.
Hope this helps.
Regards,
-Praveen.
http://myracle.wordpress.com

Similar Messages

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

Need Solutions for these Errors

<b>Hello Group !
    How are you people there.Iam very much thank full to you people for your constant support.
I need solution to these errors:</b>
     1.SID missing.
     2.Idocs Missing or No Idocs arrived from source
        System.
     3.Errors in the source system
     4.Missing messages at transfer rules or
       Update rules.
     5.Data sent but not received.
     6.Errors in the source system.
    Have a nice week end
    Vijay

Hi,
1. Missing SIDS : Mostly occurs due to missing master data or if error records are parked and not loaded susequently, or if Master data is not loaded before loading Transaction data. You need to fix these situations.
2. Missing Idocs -Canbe due to idocs getting stuck, rfc connection failures, bad idocs, partner profies missing or deactivated. need to correct these errors on the source side.
3.Source system errors - Jobs on source system failed or are slow.idoc errors. Source system crashing. Problems in generic extractions. Problems with update jobs. Data not getting posted to Delta queues. Data not coming through correctly after DS enhancement. Data posting errors to infostructures are some of the errors you'll face on the source system side.
4. Missing messages again can be due to jobs being slow, processes being killed, or warning messages. Need to treat the warning messages or reset the job.
5. Can be due to IDOC errors. Goto SM58 and push data packets from there on the source system side or due to IDOC errors.
6. Same as 3.
Cheers,
Kedar

Need solution for dynamic pick lists in Crystal Reports

Does anyone have a good solution for creating a dynamic pick list for a Crystal Report that is based off of a BW Query without having to use a BW user input variable? In many cases it is not practical to use a BW variable to generate a dynamic pick list due to the high number of possible member values and the highly dynamic nature of the particular characteristic (customers, materials, etc.). In my understanding the LOV Server is not an option when dealing with SAP BW. Anyone else running into this issue with Crystal and SAP BW?

Hi Mike,
we once solved this by creating LOVs in BusinessView Manager. I am not sure if you can use the BW Publisher in this scenario as we did not use it. We published the reports directly to the BOE server for some reasons.
Creating a LOV in BusinessView manager is really easy. You can create cascading prompts, shedule refreshing of the lists, ...
By using the cascading prompt feature you can make prompts like this:
First enter the customer number (or pick it from a list) and then the second list, which holds the materials only has shows the ones which had been purchased by that customer. I think this is what you are looking for.
You should give it a try!
Thorsten

Need Solution for iWeb/QuickTime viewing problem in IE 6 for Windows

When viewing an iWeb page in IE 6 for Windows with a background picture and a QuickTime movie embeded, the QT movie frame will "smear" when the page is scrolled. More specifically, The QT movie frame will not lock into its proper position as long as the page has a background picture selected in iWeb when viewing w/ IE 6 for Windows. Does anyone know of a solution for this? Does this problem still exist w/ later versions of IE for Windows?
By the way, if you don't already know this, changing the Page Background setting back to the default of 'Color Fill' in iWeb and republishing will not correct the problem once a background picture is selected for a page. You have to set the Page Background setting to 'None' and republish. The movie frame will then be locked into place when scrolling the page in IE 6 for Windows.
MBP 17in (1 GB RAM), PB G4 15in, PB G4 12in, iMac G3 Mac OS X (10.4.7) Loyal to Apple since the Apple ][+

Someone else posted that you may have to remove the image altogether, publish, then place the replacement image. The images for the background of my newest pages use this as a tiled background successfully.
http://web.mac.com/makentosh/iWeb/tipsfromtheiceberg/Images/background.jpg
I'm not sure how well tiling would work on your page though since it would begin to repeat vertically when you don't want it to (for me, tiling is exactly what I needed).

Need solution for a Reporting Requirement

Hello Experts,
I need design a solution for Report, where in I need to show ageing of Invoice based of Due date of Invoice for last four weeks as explained below:
In cube i have records like this:
Industry       Invoice Number      Due Date      Amount
8111                   IV1                  13/04/2011 1000
8111                   IV2                  17/04/2011 1000
Say current week end date is 03/05/2011, now I need to show data for last 4 weeks in report, by calculting what is due at that weekend date e.g. there is no amount due on 12/04/2011, but next week on 19th amount due in 1000, then subsequent week there are 2 Inv. due, amount for 26th is 2000. Similarly there is additional invoice after 26th, so amount on 3rd remains the same i.e. 2000.
Industry    Week End date AR Amount due
8111     12/04/2010     0
8111     19/04/2010     1000
8111     26/04/2010     2000
8111     03/05/2010     2000
Please let me know what is the best solution to achive this, as data volume would be high i.e.
1. In Bex query, is this can be done, if yes how?
2. Or we need to do this in EDW, by having additonal cube, if yes how?
Please let me know if you have solution for this.
Regards,
Vipul

Hi All,
Thanks for the replies.
Please tell me if I can call a file sender communication channel from an UDF and pass the dinamic configuration values at runtime.
If this is possible, I think the above requirement is addressed.
Please tell me in case of any more solutions too.
Thanks once again.
Regards.

I need solution for this query

hi all,
could anyone please send me solution for this query these are the database tables am having
TABLE NAME :USERS
ATTRIBUTES
UNAME
PASSWORD
GROUPNAME
TABLE NAME:GROUPS
ATTRIBUTES
GROUPID
GROUPNAME
my requirement is that i need 2 acces the groupname of a particular user and the reamining groups to which i doesn't belong in A SINGLE QUERY
my result needs to be like this
Authorised group
consultant
UNAuthorised groups
sales
vender
recruiter
admin
if any body got the solution please send

hi All,
I have 3 tables 1)PREVILEGES (groupname, previleges(values y or n only))
2)GROUPS (groupid, groupname)
3) USERS (uname, groupname).
Here each user belongs to one group, each user hav a default previlege means example if user is consutant then he can access only consultant group. Means default previlege will be used. For default previleges, there is no record in Previleges table.
The Problem is that, I need to reterive the groupname from users which de doesn't belong as well as his previleges from previleges, If there is no values in previleges in the table it should return n. or value what is therey.
the different groups are
SALES,CONSULTANT,VENDER,RECRUTER,ADMIN

Need solution for this query

i want solution for shape & append query as run in access for oracle
RS.Open "SHAPE {select ID,MAX(Module_Name) AS MainMenu from USER_MODULE GROUP BY ID} APPEND ({select ID,NAME,USER_module.srno,iif(right(param_str,1)='P','ü','') as Allow,iif(left(param_str,1)='A','ü','') as Ins,iif(MID(param_str,2,1)='E','ü','') as Edit,iif(MID(param_str,3,1) = 'D','ü','') as Del,flag,CODE,NAME from USER_MODULE left join user1 on user1.srno=USER_module.srno where user_name='" & Master_Rst!USER_NAME & "' or user_name is null} RELATE ID TO ID) AS AA", G_CompCn, adOpenDynamic, adLockOptimistic

If you are in migration from one DB to other - you should not go with one to one convertion.
First understand the business requirment - whats working and how is it working and whats expected out of your new code etc.
Then decide what to place and how using your new DB.
There might not be one to one exact match in all DBs.
Simple example if you find any connect by prior in oracle - can you replace it with simple SQL command in ACCESS / SQL SERVER as it is without any functions?

Need solutions for Budget, Landed cost and difference in 2005b and 2007B

Hi all,
Need help for the following scenarios
1. How to define budget for Purchase order and cost centers
2. Landed Cost in SAP B1 2007 how do we do? I am getting an error message stating that Landed cost allocation account is not defined....
3. Difference in 2005B and 2007B
Regards
Shashi

Thankyou Jasper,
Landed cost problem has been solved.
Regarding Budget set up My client need Budget at costcenter level. i.e Cost center wise they want the budget. As of my knowledge to do this we need to activate Account segmentation right?
Without doing that is there any other way where we can set Budget cost center level also?
one more thing, there is a check box of purchase order, Goods Receipt and Accounting at the time of setting up Budget in General setting? what it is for?
Regariding difference in 2005b and 2007B I was not able to get documentation on this.
Regards
Shashi

Need solution for solving TIME_WAIT in TCP/IP ports in Windows Server 2008 Standard Service Pack 2

In one of our windows machine( OS : Windows Server 2008 Standard (Service Pack 2)-32bit), we are facing TIME_WAIT in all the TCP/IP ports and it is not getting closed.
On analyzing the issue, we found solution for this from the below link,
https://support.microsoft.com/en-us/kb/2553549
In this page, we are able to get the hotfix for Windows Server2008 R2 SP1 but i can't able to get for Windows Server 2008 Standard SP2(32bit). If we try to apply the hotfix vailable for SP1, it is showing "The update does not apply to your System".
Kindly provide us the solution for solving TIME_WAIT issue in the machine.
OS Details : Microsoft Windows Server 2008 Standard
Version : 6.0.6002 SP2 Build 6002
System Type : 32 bit(x86-based PC)
Awaiting for the response.
Thank you,
Pushpalatha.A

Download correct version from Microsoft Update Catalog. Run it with elevated rights.
M.

Need solution for multiple Firewire needs

My new 27" 2011 imac will arrive next Monday. I'm now trying to define and solve all potential hurdles.
I seek recommendations on how to best solve my need to attach 2 original firewire cables, into this imac that only comes with 1 firewire 800 input. Both connectors are critical to my work. One connector will turn hard to the right for about six feet to connect to my Digi02 audio interface. The other cable connects and turns hard to the left for 15 feet to connect to my Epson 2200 art printer. Both of the outboard equipment need the original firewire.
I have considered daisy chaining the audio interface and the printer. Except they are on opposite sides of my studio, and I prefer NOT to use a 25 foot firewire cable between such critical peices of hardware.
A better possibility may be a firewire hub, although it will probably also need adaptors for the different versions of firewire i need. That seems rather inelegant. Another possibility would be to get one USB to firewire adaptor and one firewire to 800 adaptor. Do these USB to firewire adaptors work OK?
Anyway, which of these methods would you recommend as my best choice? Are there other choices i haven't mentioned here?

The guy is totally correctin his review.
That is how FireWire works. The FireWire bus will run only as fast as the slowest device on the bus. So as soon as plug in a FW400 device, everything is then clocked down to 400FW.
If you need to have both FW800 and FW400 devices running at their native speeds you need two FW busses each with their own controller.
Because of the limited expansion capability of the iMac, I don't see any way for you to get around this limitation.
If you get a Mac Pro then you could use a FW PCIe card for the second bus and controller.
Allan

Need solution for opening multiple connection to server in parallel

Hi..
I have used URL and URLConnectin classes to open connection to server,
and i used URLConnection.getInputStream( ) to download HTML pages.
Now my requirement is to open more than one connecton to single HTML document and download the file in parallel.
for example, if the HTML file size is 60KB..then i open three connection and
connection 1 downloads first 20KB
connection 2 downloads second 20KB
connection 3 downloads final 20KB
all the above should be done in parallel....by threading or else..
first of all i want to know is it possible to do the above in java?
anybody having solution for the above requirement?
venu

hi,
i too have the same problem
actually i am designing a download manager ,and had the same problem
that how to put multiple threads for doing it ,,,,
have u got solution for it..
if so please help me..
my mail id is [email protected]
i want help in designing the download manager
can any one help me out plzzzzzzzzzzzzzz
bye

Need solution for mass exclusion of computers from IE 10 deployment

hey all,
hopefully I've got the right forum for this question.
I have to deploy IE 10 company-wide (about 1800 computers), but I need to exclude hundreds of computers because of an incompatibility with a web-based application.
we have a query-based collection in SCCM that we use for deploying updates company-wide, but we can't use this since I need to exclude computers from the deployment.
when I deployed IE 9 I ended up exporting the query results for this collection, then did a copy/paste of the results to a new collection, minus the computers that had to be excluded for the IE 9 deployment.
unfortunately, the IE 10 deployment has too many exclusions for this to be efficient.
so, I'm trying to figure out the best approach to this- any ideas/suggestions?
is there anything in SCCM (or a third party option) that can generate a list of computer names based on a list of AD user names? the user names list would be lengthy, close to 500.
I am using SCCM 2007 SP2.
thanks in advance for any help with this!

Hi,
I would try to use an exclude collection,
1. create a collection with all computers that are excluded from IE10, you can use whatever query you like, inventory e.t.c
2. create exclude rule in the collection used for deploying and excluding the collection above from the deployment.
No there is no builtin feature to convert a list of usernames to computernames, check Top Console user, that would be the best source of information.
Regards,
Jörgen
thanks for the response.
are there any third party options that can generate a list of computer names based on a list of AD user names?
manually adding hundreds of computer names to (or removing from) a collection really isn't an option.

Need solution for unicode error

Hi ,
I am facing unicode error "ESCAPE_TRICK cannot be converted to a character-type field" for
the following syntax -
ESCAPE_TRICK-X1           = '1C'.
Where ESCAPE_TRICK is defined as -
DATA: BEGIN OF ESCAPE_TRICK,
X1(1) TYPE X,
END OF ESCAPE_TRICK.
Please suggest me the solution.
Thanks,
Narayan

Hi,
As type X is obsolete.
you need to convert it to type c. But you should convert the hexadecimal value '1C' to its equivalent Char value. Replace your code with:
DATA: BEGIN OF ESCAPE_TRICK,
X1 TYPE STRING,
END OF ESCAPE_TRICK.
To convert Hex '1C' to type string
CALL FUNCTION 'CACS_CONVERT_HEX_TO_STRING'
EXPORTING
    XSTRING       = '1C'
IMPORTING
   CSTRING       = ESCAPE_TRICK-X1.
It should solve your purpose.
Alternatively, '1C' is "FILE SEPERATOR'. you can find its value in char and can use it.
howver, the first ,method should work..
revert back in case of further issue.
Thanks and Regards
Rishika
Edited by: Rishika Bawa on May 14, 2009 2:06 PM

Need solution for Table control

Hey Guru's,
I need to develop a Table control in which I have a column that might be something like a TextBox/TextArea(in HTML), able to introduce more than one line, for each entry in the table control!
I know it is possible to use the custom control option to create a TextArea in a screen, but I need the something similar inside a Table Control.
Regards,
Marcelo Moreira

Hi,
I think this is related to HR ABAP. It may be related to Master Data also.
Please have a look into this thread.
HR ABAP dump - CX_SY_PROVIDE_TABLE_NOT_SORTED
Shiva

Need solution for flashback option

Similar Messages

Maybe you are looking for