Need some assistance with multiple problems (8330 Curve)

Hello all,
I am recent buyer of an 8330 (Verizon). I like it a lot and find it a very useful tool. Being new to the BB world, I do have some questions, that I cannot find answered on any of the BB forums.
So here they are:
1. I have two e-mail accounts setup on my BB. So this means that I should have only two e-mail options under applications. I have three and the third one seems to get messages from both of my two other accounts. What is also weird is that there is no e-mail header on the top (like with the other two e-mail folders). How do I get e-mails to stop going in to this folder and basically delete it? The other strange thing (that I just noticed is that this generic e-mail box gets some e-mails that my other two accounts never see (even though they have their correct e-mail address on them)!
2. How do I create sig lines for my e-mail accounts? I have read the help pages, but the instructions they give me for creating signatures on my outgoing e-mails does not work.
3. Does the new 4.5 SW upgrade allow me to use the GPS capability with my phone? I bought the download Garmin SW for my phone ONLY to find out later that Verizon has blocked this feature! It should would be nice if either VZ or Garmin would have made that crystal clear when I got my phone. :-(
Thanks much for all the assistance!
Grant

1. That is the "Messages" folder. It is a dumping ground for ALL messages including all emails, sms, mms, pin, BBMessenger (if selected) and any others like Browser messages, etc. You can't stop messages from going there but you can hid the icon, if you like.
2. To create signatures for email you have to use the BIS logon from your PC. Use the link below to do this:
https://bis.na.blackberry.com/html?brand=vzw
3. Upgrading the OS does not allow you to use the GPS with other software like Garmin. This is a Verizon lock and there is no way around it. They want you to pay for their service.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

I have a iphone 4 and when i call people then cant hear me and the mute is off .. need some help with this problem

i have a iphone 4 and when i call people about 70 percent of the time then cant hear me and the mute is not on , need some help

Please see the More Like This section on the right.

REALLY need some help with my problem (Netgear and...

Hi everyone,
Well... where to start really.
This morning around 5am, I lost connection to the net, yet my Netgear (DG834 wired) showed an uptime of 117 hours, so it showed no reboot. It seems my IP profile was raised (As it was low before for my sync).
I had no reboot it seems, but my noise margin went up to 9db from 6db. This is fine as it means I should be getting around 6.5meg IP profile going by the sync. Anyway (This is complicated to explain but bear with me).
My current IP profile is now 7.15K. I know this will come down now to match my sync at 9db (Which should be 6.5meg).
What is happening, is that any change made to my broadband (Like my IP profile being raised this morning) means that I cannot then connect to the net, and anything connected (Like Xbox Live etc) disconnects, even though the router shows no disconnect, and all the lights are green.
The only way for me to reconnect to the internet then is to MANUALLY reboot the router, because no matter what website etc I try to view, it just says "Looking for..." in the bottom left corner of the browser, and I can't connect to anything like Xbox Live etc.
Can anyone explain why this is happening with the Netgear router? Shouldn't any change, like an IP profile increase not affect my broadband connection? It seems whenever a change is made BT side, I have to then manually reboot the router to get online.
I wondered if anyone with a netgear, or anyone with some knowledge on this could tell me why. This could save me a lot of headaches down the line and stop me having noise margin raised etc because I have to manually reboot the router to get it working again. I just thought that any change, like an increase in IP profile etc, shouldn't affect my connnection and force me to have to manually reboot the router to get it up and running again.
I hope you understood what I was trying to explain, and thanks in advance for any responses.

Hi John. Thanks for responding.
I have been through the options on the router and can't find one that says auto connect at all.
It seems the router is not disconnecting though (Like this morning when the IP profile raised), as the uptime on both WAN and LAN were showing 117 hours, and all green lights were on, on the router. It's just when a change on the BT side is made, it won't let me get on the net until I do a manual reboot. It's all very baffling to me really.
I tried googling my problem to no avail also.

I'm new to this and I need some assistance with centering.

I believe that it is a simple soultion but one that eludes me. From what I've read it involves tweaking the CSS rules for the container, I've tried that but no luck. I'm trying to add an external mp3 player to my page and center it with a certain distance from the items located at the top of the page. Here is my code for the page.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Sinful Lilly Official Site</title>
<style>
#container {
    width: 968px;
    background: #000;
    margin: 0 auto;
    padding-left: 10px;
    padding-right: 10px;
    overflow: hidden;
    left: auto;
body {
    background-color: #000;
#apDiv1 {
    position: absolute;
    left: 251px;
    top: 202px;
    width: 693px;
    height: 480px;
    z-index: 1;
</style>
</head>
<body>
<div align="center" id="apDiv1"><div class="widget_iframe" style="display:inline-block;width:690px;height:320px;margin:0;padding:0;border:0;"><ifram e class="widget_iframe" src="http://www.reverbnation.com/widget_code/html_widget/artist_2569899?widget_id=50&posted _by=artist_2569899&pwc[design]=default&pwc[background_color]=%23333333&pwc[included_songs] =1&pwc[photo]=0%2C1&pwc[size]=fit" width="100%" height="100%" frameborder="0" scrolling="no"></iframe><div class="footer_branding" style="margin-top:-5px;font-size:10px;font-family:Arial;"><center><a href="http://www.reverbnation.com/band-promotion/fanreach?utm_campaign=a_features_fanreach&utm_m edium=widget&utm_source=HTML5_Player&utm_content=widgetfooter_Get Band email for free at ReverbNation.com" target="_blank" style="text-decoration:none;color:#444;">Get Band email for free at ReverbNation.com</a></center></div></div></div>
<p align="center"> </p>
<p align="center"><img src="images/Sinful-Lilly-Page-Music.gif" width="1152" height="749" usemap="#Map" border="0" />
<map name="Map" id="Map">
    <area shape="rect" coords="364,20,516,101" href="Music.html" alt="Music" />
    <area shape="rect" coords="641,23,755,90" href="index.html" alt="Home" />
</map>
</p>
</body>
</html>

First and foremost, get rid of the APDiv.
AP in APDiv stands for Absolute Position. It uses a pixel distance from the top left of the page and draws the element in that location no matter what happens with the rest of the page. You can't center an absolute positioned element.
You also have some other errors in your html that are going to cause problems.
Run your page through the validator at http://validator.w3.org to get a listing and fix those problems.
If you get everything cleaned up, remove the APDivs and are still having issue centering your info, post back with your updated html and we can take a closer look.

HT201441 Hi, me need some assistance with unlock

Can I contact with somebody , who can assist me with my telephone.
I new owner telefon, but previous owner didnt tell ID and password.
And now I cant turn on telefone. Telephone is not stolen , and I can give you all information.
You see this Phone was not stolen. Name previous owner is Cedric Arndt, hi is from Germany, City is Oberhasen. From this date when I buy item I can contact with owner.I dont know what happened with HIm.
On box all numbers
MD235D/A Iphone 4s, Black, 16GB
Apple in California
ModelA1387
Part No: MD235D/A
Serial No:D*****************0
IMEI/MEID 0****************3
Number under cover box: 602-7519-A
Number on battery:Model A1387 EMC2430 FCC ID:BCG-E2430A IC:579C-E2430A
I cant recover Cedric ID number, because I know only half.
My accaunt in apple store is opened. Now you know all information which I have on this moment, because if I not unlock this phone me need contact with ebay and send this phone back soon as possible.
Kind regard
Aleksandrs
<Personal Information Edited by Host>

You should not post your email address and all this information on the phone - it's and invitation to spam and a security risk. I've asked the Hosts to remove them.
Only the previous owner can unlock your phone. Apple cannot help you (and you are not talking to Apple here, this is a user-to-user forum). You need to contact him and get him to remove the phone from his list of devices, and get him to unlock it. Without this you cannot use the phone.

Need some assistance with dynamic database updates done through a loop

In the part of my application that I'm currently working on
I'm trying to dynamically update a local database every time a
change is made to the dataProvider(ArrayCollection) when a dragDrop
action is done. After doing some more research I found that the
update "function"(my trace placeholder) is fine where it is, the
problem is that it is firing the insert function for each and every
row every time something is dragged onto the datagrid essentially
cloning all the entries in the database while updating the original
items. So I've narrowed down my problem to figuring out how to get
the insert function to fire only once for new items and skipped
when updating items. The database is a local as this is an AIR app,
I'm posting this here since I feel this is more of a flex issue
than an AIR issue. I've already tried adding an else clause to the
if statement but that doesn't work along with else if. Thanks in
advance.
Here's my code so far:

Ok, one thing I'm going to try today is this; essentially I'm
going to
say, "forget that for-loop, just let it update the
dataProvider". What
I'm going to do is write another function that runs each row
of the dp
through a filterFunction and checks to see if it is there or
not, if
it is there, then update the editable values, if not, then
insert a
new row. Since this would be invoked after the dataProvider
update, I
may just save it until the user closes the window in any way
and then
run this as a save and quit function. It would also help to
be able to
have it available in a button.
If anyone has a better idea on how to do this, don't hesitate
to tell me.

I need some help with wifi problem on iTouch gen 4

i have a problem with my wifi on itouch gen 4, it only access wifi without password but password wifi,it always shows the message "incorrect password", i tried many solutions but those seem like impossible.Please help me solve it, thanks everybody!I

u got any
i>indoor
I>Indianapolis
l>Laptop
1>one
O>on
0>zero
as any of ur pswd? it could look like anyone of them since computers dont show in regular txt's of L's and i's nc capital "i" and a "L" has the same showing> "l" "I" ya dont know from each other apart, one of them is a L and the othe is a i, not on less u look at it very carefully, u could probably tell each other apart

New to Solaris administration - Need some help with some issues

Hello all,
I am a new to Solaris administration and need some assistance with a few things. I was going to make separate posts but decided it would be easy to keep track of in one. I really do not know much about the OS but I do have a little Linux background so that might help me out. I am going to number my problems to keep them sorted, so here we go.
The machine:
Sunfire V880
4x 73GB HDs
PCI dual fiber channel host adapter
Attached RAID array:
Sun StorEdge T3 Array with 9x 73GB HDs
Sun DDS4 Tape Drive in a Unipack
OS: Solaris 5.10
Updates: Updated everything except 2 patches (Updating is a real pain isn't it? At least it seems that way to me.)
1. So I might as well start with the update issues! These 2 updates will not install:
-PostgreSQL 8.2 source code, (137004-02)
Utility used to install the update failed with exit code {0}.
-Patch for mediaLib in solaris, (121620-03)
Install of update failed. Utility used to install the update is not able to save files. Utility used to install the update failed with exit code 4.
No idea why the PostgreSQL update is not working, but the medialib patch seems to not have enough hard drive space.
2. Where are all the drives? I don't know how to find the RAID box or the other 3 internal hard drives. When I installed the OS, I think I installed it on only one hard drive and that might be part of the reason why the medialibe update above says that I don't have enough space.
3. I probably need more space for the OS and updates, is there a way to "add" space onto the hard drive that currently is running the OS?
3. Once I see the other hard drives I wish to combine them to make a RAID 0 and RAID 5 array, how do I go about doing that?
4. How can I find/see the tape drive?
5. Does my swap space really need to be 64GB? I know the book I have read suggests it, but I only made it 5GB because it didn't seem to make sense to make it 64GB.
Thank you in advance for the help. I know these are a lot of questions to ask but please go easy on me :)
rjbanker
Edited by: rjbanker on Mar 7, 2008 8:21 AM

SolarisSAinPA*
1.
-PostgreSQL 8.2 source code, (137004-02)
Utility used to install the update failed with exit code {0}.
Exit code 0 means there were no errors. When you run showrev -p 137004-02, does your system show that the patch is installed? You can check the log for a particular patch add attempt in /var/sadm/patch/+patch_num_rev+1- A bunch of stuff shows up, here is a portion (I am not entirely sure what it means, there must be a least a page of stuff like this):
Patch: 121081-08 Obsoletes: Requires: 121453-02 Incompatibles: Packages: SUNWc cccrr, SUNWccccr, SUNWccfw, SUNWccsign, SUNWcctpx, SUNWccinv, SUNWccccfg, SUNWcc fwctrl
Patch: 122231-01 Obsoletes: Requires: 121453-02 Incompatibles: Packages: SUNWc ctpx
Patch: 120932-01 Obsoletes: Requires: Incompatibles: Packages: SUNWcctpx
Patch: 123123-02 Obsoletes: Requires: Incompatibles: Packages: SUNWccinv
Patch: 121118-12 Obsoletes: Requires: 121453-02 Incompatibles: Packages: SUNWc smauth, SUNWppror, SUNWpprou, SUNWupdatemgru, SUNWupdatemgrr, SUNWppro-plugin-su nos-base
2.
Where are all the drives? I don't know how to find the RAID box or the other 3 internal hard drives. When I >installed the OS, I think I installed it on only one hard drive and that might be part of the reason why the >medialibe update above says that I don't have enough space.
When you run format command, how many drives are listed? Identify your root drive (compare with output of df command you ran earlier) Please post here.2. Output of df-hk, looks like I ran out of room. Should I just go ahead and reinstall the OS?
Filesystem size used avail capacity Mounted on
/dev/dsk/c1t0d0s0 5.9G 5.4G 378M 94% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 42G 1.3M 42G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
/platform/sun4u-us3/lib/libc_psr/libc_psr_hwcap1.so.1
5.9G 5.4G 378M 94% /platform/sun4u-us3/lib/libc_psr.so.1
/platform/sun4u-us3/lib/sparcv9/libc_psr/libc_psr_hwcap1.so.1
5.9G 5.4G 378M 94% /platform/sun4u-us3/lib/sparcv9/libc_psr.so.1
fd 0K 0K 0K 0% /dev/fd
swap 42G 1.1M 42G 1% /tmp
swap 42G 32K 42G 1% /var/run
/dev/dsk/c1t0d0s7 46G 47M 46G 1% /export/home
3. So I guess the general consensus is to reinstall the OS, is that correct?
4. There is nothing in \dev\rmt, and unfortunately I don't have a tape to test it with!
5. I guess 5GB will be ok for what we do.
Alan.pae*
1. I think the above text might explain why it failed, although I don't know how to correct it.
2. Output of format:
# mount
/ on /dev/dsk/c1t0d0s0 read/write/setuid/devices/intr/largefiles/logging/xattr/onerror=panic/dev=1d80008 on Mon Mar 10 10:56:51 2008
/devices on /devices read/write/setuid/devices/dev=4dc0000 on Mon Mar 10 10:56:19 2008
/system/contract on ctfs read/write/setuid/devices/dev=4e00001 on Mon Mar 10 10:56:19 2008
/proc on proc read/write/setuid/devices/dev=4e40000 on Mon Mar 10 10:56:19 2008
/etc/mnttab on mnttab read/write/setuid/devices/dev=4e80001 on Mon Mar 10 10:56:19 2008
/etc/svc/volatile on swap read/write/setuid/devices/xattr/dev=4ec0001 on Mon Mar 10 10:56:19 2008
/system/object on objfs read/write/setuid/devices/dev=4f00001 on Mon Mar 10 10:56:19 2008
/platform/sun4u-us3/lib/libc_psr.so.1 on /platform/sun4u-us3/lib/libc_psr/libc_psr_hwcap1.so.1 read/write/setuid/devices/dev=1d80008 on Mon Mar 10 10:56:50 2008
/platform/sun4u-us3/lib/sparcv9/libc_psr.so.1 on /platform/sun4u-us3/lib/sparcv9/libc_psr/libc_psr_hwcap1.so.1 read/write/setuid/devices/dev=1d80008 on Mon Mar 10 10:56:50 2008
/dev/fd on fd read/write/setuid/devices/dev=50c0001 on Mon Mar 10 10:56:51 2008
/tmp on swap read/write/setuid/devices/xattr/dev=4ec0002 on Mon Mar 10 10:56:52 2008
/var/run on swap read/write/setuid/devices/xattr/dev=4ec0003 on Mon Mar 10 10:56:52 2008
/export/home on /dev/dsk/c1t0d0s7 read/write/setuid/devices/intr/largefiles/logging/xattr/onerror=panic/dev=1d8000f on Mon Mar 10 10:56:57 2008
3. Judging by the above text I will be doing a reinstall huh?
4. Actually I am not familiar with tape backups let alone solaris backup apps! Any suggestions? (Preferably free, have to cut down on costs.)
5. No comment
Thanks for the help, hope to hear from you again!
rjbanker

Need some help with strange sounds in Logic Pro 8

Hi!
I need some help with a problem I have in Logic Pro 8.
When I have arrange window open, suddley strange high tones starts to make noise in my headphones. I don't know where these sounds comes from or why, but I need some help to get them away. Should I just try to contact Apple?
Martin

Hi Martin
Welcome to the forum. Give everyone here some more info about your set up otherwise it may be difficult to figure out what is wrong.
Which mac?
Which OS?
any hardware devices?
if you are listening through headphones using the built in audio from the mac, you may be hearing fan noise or a hard drive spin noise.
Don

Need assistance with multiple issues with several G5's

Hello All,
I need to get some assistance with some issues that I am having with several G5 Dual’s
I just started a new position and I have 4-G5 Dual’s that are in various states of disrepair. Normally I would call Apple support but they did not purchase the extended AppleCare packages for any of the G5’s theu purchased and they are ALL over a year old now. Any suggestions would be greatly appreciated.
G5 number 1 - Has its fans running at full output all the time. Could this be a firmware issue?
G5 number 2 – Had it’s logic board replaced by one of our company computer techs and now at start up gives a long tone then boots to white screen with a command prompt. Requiring me to either type “mac-boot” or “shutdown”. If I continue the boot process the machine just goes to a gray screen and stalls. I researched this yesterday and tried several solutions I found here but to no avail. Seems to me that past of the issue is that it is stuck looking for a firmware upgrade. How do I get past it?
G5 number 3 – Mac seems to boot correctly but when you click on the Apple icon in the upper left hand corner the Finder blinks out and then comes back. It does this every time we try to go to the Apple menu. We removed the original hard drive and installed in a known good drive, our tech drive with a G5 image, rebooted the mac and the same issue occurs with the Finder.
G5 number 4 – This unit boots to black screen with a Unix command prompt displaying “root#”. Any thoughts.
Thanks
Paul
G5 Dual Mac OS X (10.3.9)
G5 Dual Mac OS X (10.3.9)

Apparantly someone not certified to repair them messed them up.
Tell bossman it would be in his best interest for you to take them to a authorized Apple Repair and get it done with.
Tell him that Mac's rarley screw up hardware wise and there really hasn't been a great demand for skilled repair techs outside of Apple.
If your worried about your job, tell him you can take care of the software, training, minor hardware and networking end of the matter. Which, luckily for you, are longtern and ongoing needs. You can tell him that.
There's nothing wrong in admitting you don't know how to do something and keeping your job, than to be unable to fix them and lose your job.

On closing Photoshop CC, I am getting an error message on screen that read's "Selective Palette error: no element found at line 1. Are you able to assist with this problem?

Can anyone shed some light on this error message I am getting upon closing Photoshop CC
I am getting an error message on screen that read's "Selective Palette error: no element found at line 1. Are you able to assist with this problem?

Same issue here in WI and for me it was at 6:36p CST.
I'm changed my password, removed iCloud from my phone ... tried 3G and WIFI with no luck. I also cannot check it on my Mac or iPad. I was able to get contacts and calenders back on my phone but no mail yet.
Did the whole Apple support thing and apparently I'm part of the 1%
EDIT: Question: are all of you former MobileMe users as well? Just wondering because I know there were going to be some changes as they completely move MobileMe over to iCloud and drop the "extra" services. I just can't remember if it was just a single cut off date or a series of dates. THAT email is stuck in my iCloud folders.

Need some help with ".png" image.

Good day everyone. Here's the run down. I need to add an
image (image "A") ontop of another image (image"B"). Image "B" is a
paterned background. And Image "A" a logo with a transparent
background.
As it stands I have image "A" as a "png" and as you know....
they are fri**ing huge! Haveing it as a "gif" only presents me with
the IE6 problem of it adding a colored background to the image.
So I'm stuck! Can any one tell me or point me in the
difection of a tutorial to tell me the best way to add an image
with a transparent background in Dreamweaver.
Really need some help with this!
Thanks all!

>Right you can see the work in progress here>
http://www.stclairecreative.com/DoughBoys_Site_Folder/home.html
Before going much further I'd recommend reconsidering the use
of a textured background. They are usually included for the benefit
of the site owner only, and likely to annoy visitors. Studies on
the subject suggest they often lead to usability problems. I do
like to header graphic, but at 200K it's kinda heavy and can
probably be optimized.

Need some help with guitar setup...

jeez, never thought i'd be asking a question like this after playing for like 20 years, but i need some help with a guitar setup for mac. i'm gonna list out a lot of crap here that prolly doesn't affect anything at all, but here goes.
Imac 17inch G4 - latest updated OS X... 10.4, or 5, or whatever. garageband 3.0
digitech gnx-3
alesis sr-16
sure mic's
yamaha e203 keyboard
here's the setup:
yamaha is on its own on a usb uno midi interface, sure's connected to gnx's xlr port, alesis connected to gnx's jam-a-long input, '87 kramer vanguard connected to gnx's guitar input. currently running headphones out on gnx to line in on mac.
here's the problem:
everything works beautifully, but my guitar sounds like crap. if i plug headphones into the gnx, it sounds beautiful. that makes me think its some kind of level issue between the gnx's output, and the mac's input, but nothing seems to fix it.
by sounding like crap, i mean way too much bass. sound is muddy, blurry, not crisp... aka crap. i've tried altering both output and input on mac and gnx, and i cant get a combination that works. the gnx has a s/pdif out, can the mac accept that as input? might that help? short of running the gnx to my marshal half stack and mic'ing that, anyone have any suggestions, or use a similar setup?
any help would be greatly appreciated!

anyone? ... any suggestions? I think it might be an issue with the gnx pre-amping the signal as it goes out, and then the mac amping it on the way in, giving me a buttload more signal than i need, but since i cant find a happy level, i'm not really sure. i really dont want to resort to mic'ing my marshall... even with the volume almost off, my jcm900 is WAY too loud for apartment use. its not like i really NEED the guitar to sound perfect, i only use garageband to sketch out ideas for songs between myself and bandmates, but its really annoying to not have my customary crisp distortion. my bass player keeps telling me to use the built in amps, but, not to dis a practically free program, but the built in amps blow, at least after 10 years of marshall tube amplification they do. if anyone has any suggestions that might be helpfull on how i might resolve this, i would be your best friend for life and go to all your birthday parties

I Need Some Help With My Dreamweaver

Hello, there i need some help with my dreamweaver i already made a forum about this but that one i maded didnt make sense soo i will make it more details in it soo i will tell you what i did i tell you what i downloed and all that just now but i tell you the things what it does i downloaded Adobe Design and Web Premium CS6 its a 30 day trial then and now i will tell you the details look below please
Details
Soo i opened my start menu then went on all programs then clicked on Adobe Design and Web Premium CS6 then i clicked on the dreamweaver CS6 then when i clicked on it i heard my computer shut down then it shuted down when i opened it straight away then it turns it self back on
What did i do about this when it happened?
I made a question so please can telll me what to do or what ever
Why did i download it?
i downloaded it because i am making a website and i want to use dreamweaver CS6 because i use notepad++ i do not like the notepad++ its harder and dreamweaver helps a bit i think because i watched a video of it
What if you dont have an answer?
Well, i will be very angry because i am making a good website its gonna be my frist publish website ever i made 20 websites but i never published them i deleted them because i wiped my computer
What kind of Computer Do You have?
System:
Micfosoft windows xp
Media Center Edition
Version 2002
Service Pack 2
Computer
ei-system
intel(R)
pentium(R) 4 CPU 3.20ghz
3.20 ghz, 960 MB of RAM
Btw i am using dreamweaver CS6 if you fogot and dont say add more details because there is alot off details there and if you help me i will show u the whloe code when i am done but leave ur emaill address below
(C) Connor McIntosh

No.
Service Pack 3 just updates your OS. All of your files, folders and programs will still be there.
You will start running into more problems like this the longer you stick with XP though. That particular OS is over 11 years old, service pack 3 hs been out for over 4 years.
It may be time for a system upgrade. I personally went from XP to Windows 7 and I haven't looked back one bit.

Please I need some help with a table

Hi All
I need some help with a table.
My table needs to hold prices that the user can update.
Also has a total of the column.
my question is if the user adds in a new price how can i pick up the value they have just entered and then add it to the total which will be the last row in the table?
I have a loop that gets all the values of the column, so I can get the total but it is when the user adds in a new value that I need some help with.
I have tried using but as I need to set the toal with something like total
    totalTable.setValueAt(total, totalTable.getRowCount()-1,1); I end up with an infinite loop.
Can any one please advise on some way I can get this to work ?
Thanks for reading
Craig

Hi there camickr
thanks for the help the other day
this is my full code....
package printing;
import java.awt.*;
import java.awt.event.*;
import java.awt.print.*;
import javax.swing.*;
import javax.swing.table.*;
import java.text.DecimalFormat;
public class tablePanel
    extends JDialog implements Printable {
BorderLayout borderLayout1 = new BorderLayout();
private boolean printing = false;
private Dialog1 dialog;
JPanel jPanel = new JPanel();
JTable table;
JScrollPane scrollPane1 = new JScrollPane();
DefaultTableModel model;
private String[] columnNames = {
private Object[][] data;
private String selectTotal;
private double total;
public tablePanel(Dialog1 dp) {
    dp = dialog;
    try {
      jbInit();
    catch (Exception exception) {
      exception.printStackTrace();
public tablePanel() {
    try {
      jbInit();
    catch (Exception exception) {
      exception.printStackTrace();
private void jbInit() throws Exception {
    jPanel.setLayout(borderLayout1);
    scrollPane1.setBounds(new Rectangle(260, 168, 0, 0));
    this.add(jPanel);
    jPanel.add(scrollPane1, java.awt.BorderLayout.CENTER);
    scrollPane1.getViewport().add(table);
    jPanel.setOpaque(true);
    newTable();
    addToModel();
    addRows();
    setTotal();
public static void main(String[] args) {
tablePanel tablePanel = new tablePanel();
tablePanel.pack();
tablePanel.setVisible(true);
public void setTotal() {
total = 0;
int i = table.getRowCount();
for (i = 0; i < table.getRowCount(); i++) {
    String name = (String) table.getValueAt(i, 1);
    if (!"".equals(name)) {
      if (i != table.getRowCount() - 1) {
        double dt = Double.parseDouble(name);
        total = total + dt;
String str = Double.toString(total);
table.setValueAt(str, table.getRowCount() - 1, 1);
super.repaint();
public void newTable() {
    model = new DefaultTableModel(data, columnNames) {
    table = new JTable() {
      public Component prepareRenderer(TableCellRenderer renderer,
                                       int row, int col) {
        Component c = super.prepareRenderer(renderer, row, col);
        if (printing) {
          c.setBackground(getBackground());
        else {
          if (row % 2 == 1 && !isCellSelected(row, col)) {
            c.setBackground(getBackground());
          else {
            c.setBackground(new Color(227, 239, 250));
          if (isCellSelected(row, col)) {
            c.setBackground(new Color(190, 220, 250));
        return c;
    table.addMouseListener(new MouseAdapter() {
      public void mouseClicked(MouseEvent e) {
        if (e.getClickCount() == 2) {
        if (e.getClickCount() == 1) {
          if (table.getSelectedColumn() == 1) {
   table.setTableHeader(null);
    table.setModel(model);
    scrollPane1.getViewport().add(table);
    table.getColumnModel().getColumn(1).setCellRenderer(new TableRenderDollar());
public void addToModel() {
    Object[] data = {
        "Price", "5800"};
    model.addRow(data);
public void addRows() {
    int rows = 20;
    for (int i = 0; i < rows; i++) {
      Object[] data = {
      model.addRow(data);
public void printOut() {
    PrinterJob pj = PrinterJob.getPrinterJob();
    pj.setPrintable(tablePanel.this);
    pj.printDialog();
    try {
      pj.print();
    catch (Exception PrintException) {}
public int print(Graphics g, PageFormat pageFormat, int pageIndex) throws PrinterException {
    Graphics2D g2 = (Graphics2D) g;
    g2.setColor(Color.black);
    int fontHeight = g2.getFontMetrics().getHeight();
    int fontDesent = g2.getFontMetrics().getDescent();
    //leave room for page number
    double pageHeight = pageFormat.getImageableHeight() - fontHeight;
    double pageWidth = pageFormat.getImageableWidth();
    double tableWidth = (double) table.getColumnModel().getTotalColumnWidth();
    double scale = 1;
    if (tableWidth >= pageWidth) {
      scale = pageWidth / tableWidth;
    double headerHeightOnPage = 16.0;
    //double headerHeightOnPage = table.getTableHeader().getHeight() * scale;
    //System.out.println("this is the hedder heigth   " + headerHeightOnPage);
    double tableWidthOnPage = tableWidth * scale;
    double oneRowHeight = (table.getRowHeight() + table.getRowMargin()) * scale;
    int numRowsOnAPage = (int) ( (pageHeight - headerHeightOnPage) / oneRowHeight);
    double pageHeightForTable = oneRowHeight *numRowsOnAPage;
    int totalNumPages = (int) Math.ceil( ( (double) table.getRowCount()) / numRowsOnAPage);
    if (pageIndex >= totalNumPages) {
      return NO_SUCH_PAGE;
    g2.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
//bottom center
    g2.drawString("Page: " + (pageIndex + 1 + " of " + totalNumPages), (int) pageWidth / 2 - 35, (int) (pageHeight + fontHeight - fontDesent));
    g2.translate(0f, headerHeightOnPage);
    g2.translate(0f, -pageIndex * pageHeightForTable);
    //If this piece of the table is smaller
    //than the size available,
    //clip to the appropriate bounds.
    if (pageIndex + 1 == totalNumPages) {
      int lastRowPrinted =
          numRowsOnAPage * pageIndex;
      int numRowsLeft =
          table.getRowCount()
          - lastRowPrinted;
      g2.setClip(0,
                 (int) (pageHeightForTable * pageIndex),
                 (int) Math.ceil(tableWidthOnPage),
                 (int) Math.ceil(oneRowHeight *
                                 numRowsLeft));
    //else clip to the entire area available.
    else {
      g2.setClip(0,
                 (int) (pageHeightForTable * pageIndex),
                 (int) Math.ceil(tableWidthOnPage),
                 (int) Math.ceil(pageHeightForTable));
    g2.scale(scale, scale);
    printing = true;
    try {
    table.paint(g2);
    finally {
      printing = false;
    //tableView.paint(g2);
    g2.scale(1 / scale, 1 / scale);
    g2.translate(0f, pageIndex * pageHeightForTable);
    g2.translate(0f, -headerHeightOnPage);
    g2.setClip(0, 0,
               (int) Math.ceil(tableWidthOnPage),
               (int) Math.ceil(headerHeightOnPage));
    g2.scale(scale, scale);
    //table.getTableHeader().paint(g2);
    //paint header at top
    return Printable.PAGE_EXISTS;
class TableRenderDollar extends DefaultTableCellRenderer{
    public Component getTableCellRendererComponent(
      JTable table,
      Object value,
      boolean isSelected,
      boolean isFocused,
      int row, int column) {
        setHorizontalAlignment(SwingConstants.RIGHT);
      Component component = super.getTableCellRendererComponent(
        table,
        value,
        isSelected,
        isFocused,
        row,
        column);
        if( value == null || value .equals("")){
          ( (JLabel) component).setText("");
        }else{
          double number = 0.0;
          number = new Double(value.toString()).doubleValue();
          DecimalFormat df = new DecimalFormat(",##0.00");
          ( (JLabel) component).setText(df.format(number));
      return component;
}

Need some assistance with multiple problems (8330 Curve)

Similar Messages

Maybe you are looking for