Need Some Basic Directions, Please

Hi,
New to Nokia and this Ovi Suite. Have 2 brand new 6350's and ready to pull my hair out over the lack of directions for the basics I need to know. I've been all over the Nokia/Ovi site, reading the FAQs and watching the videos and browsing this forum but not finding what I'm looking for.
The directions supplied have you install the software then run it. During that first use of the program you are prompted to choose your connection method (USB for me), then to connect the USB cable to the computer first and then the phone to the cable. Then the phone asks you what method you want to use and to choose the 'PC Suite" method.Then you wait while the program and Windows itself (I am using Win Xp Home) do their things and you get all the pop-ups and info balloons re new hardware detected and drivers and modems, etc.. until finally you get a Windows balloon notifacation showing "ready to use..." and the program shows your phone there in the lower left and all seems well.
OK - but then what????
What is the proper way to end your session?
Do you unplug the phone from the cable and then close the program, or do you close the program first then disconnect the cable from the phone?
Are you supposed to leave the program running in the System Tray or can you click 'Exit" from there to make it close totally so it's not sucking up your resources while not actually in use?
Then next time you want to connect the phone to pc and use the program ... ? Do you connect the phone to the cable first then open the program, or do you open the program first and wait for it to prompt you to connect a phone?
Do you have to screw around each use with connecting/disconnecting the USB cable to the computer each time, or can you leave that end plugged in 24/7? If left plugged in 24/7 does rebooting the computer mess it up?
When ending a session and unplugging the phone from its end of the cable, are you supposed to use the 'Safely Remove Hardware" icon in the Windows System Tray? Is Windows supposed to make a "bing-bong' sound every time you connect or disconnect the phone from the USB cable, or only the very first time when it detects it as new hardware?
I've been having nothing but problems since I got the phones and cable and program (downloaded it form the Nokia website) on Friday and I think that a big part of the problem is that I am not properly starting/ending things as far as the physical connection and THAT is what is not explained anywhere.
Please, please, please, someone, anyone, I really need step-by-step directions on the proper sequence for starting and ending sessions on a regular basis. I may want to connect my phone to PC several times a day but there are no directions on the Nokia/Ovi website for how to do anything past that first initial connection/ setup.
C

Hey,
These r just my observations only which may give u an idea
Connectivity :- Since i dont hav Nokia 6350, i will try 2 give very generic answer
Once u want to connect ur device with Nokia Ovi Suite using USB, u may get few options(It may differs from one model to other)
PC Suite or Nokia mode
Mass storage or data transfer
Image transfer
Media transfer etc.,
If u r using PC Suite mode which is very common to use for connecting ur device with Nokia Ovi Suite, no need to worry about disconnecting ur session by removing ur usb using Safely remove hardware option. U can unplug once ur session is over with Nokia Ovi Suite
But if u r trying to connect ur device using Mass storage or data transfer mode, ur device will be recongnised by ur pc as a memory stick or pen drive. People wll select this mode if they want 2 transfer huge files to/from PC and phone. Once ur operations are over(copying files, transferring files etc), to end this Mass storage or data transfer session, u hav 2 make sure that ur device will be removed using Safely remove your hardware method, this is because if u r using in Mass storage/data transfer mode, w/o using safely remove hardware method if u remove ur device from pc, chances are high some of ur data may lost or it may be corrupted etc., so its mandotary to use safely remove your hardware, if u r conencting ur device with pc using Data transfer or mass storage option.
It is advisable once ur session is done with Nokia Ovi Suite and ur pc, u close ur nokia ovi suite exit it from task bar. u can unplug ur device from Nokia Ovi Suite(PC) once ur session is over.
Hope its hlps
If my post helped you, click on Kudos button and if my solution provided is opt 2 u, accpt my solution

Similar Messages

Considering the switch to AIR Dev. Need some basic info please.

Hi, I've been developing applications for stand alone, offline touch screen kiosks using Flash and Multidiminsional Media's "Zinc". For various reasons, I'd like to move away from Zinc and go "All Adobe".
Here's mainly what I was using Zinc for.
Reading and writing to a local, MDB (MS Access) database file
launching local MPG2 and WMV video files
scheduling automatic system shutdowns/restarts
Printing to a local printer without a Windows diolog popping up
Based on what I've learned so far, here on the quesitons I have based on the numbered list above:
AIR can read/write to mySQL Lite. However, what about these senerios:
The "Wilderness and Game Commission" from some state has an enormus database of all their state's flora an fauna. I ask them to export it in "mySQL Lite" format. Will I be able to use AIR to read this database? Are there other requirements for AIR's implementation of mySQL Lite?
Suppose we have a "Registration" app on a kiosk that collects addresses and emails from users. Now we have this address/email database file written by my AIR app inside of the storage directory. What can I do with this file? With Zinc+MDB file, I needed only to hand this file over to someone with MS Acces skills to do whatever needs to be done with the data. MS Access won't open the file made by the AIR app. What are my options?
AIR works great with MP4 (H.264) files. However, I could use very old/inexpensive hardware to run MPG2 files in Zinc (which uses directx to open an instance of Windows Media Player, sans WMP interface.) Per my testing, these same machines will not run a similar quality MP4 video. Am I overlooking another AIR option?
Can AIR do this? Maybe with launching a BAT file?
We often have a thermal printer in our kiosks. Zinc provided a way to print something without the pesky Windows print dialog. Does AIR provide a similar solution?
Thanks for any information addressing any of these requirements.

AIR can read/write to mySQL Lite. However, what about these senerios: The "Wilderness and Game Commission" from some state has an enormus database of all their state's flora an fauna. I ask them to export it in "mySQL Lite" format. Will I be able to use AIR to read this database? Are there other requirements for AIR's implementation of mySQL Lite?
The database engine that's built into AIR is actually "SQLite" (http://sqlite.org/) not "mySQL Lite". It has nothing to do with MySQL, and I haven't found an easy way to export data in SQL between different databases.
The best way I've found for batch exporting/importing data using AIR is to export the data in some text format such as CSV, tab-delimited, or XML, then writing code to import that data into the AIR app.
Suppose we have a "Registration" app on a kiosk that collects addresses and emails from users. Now we have this address/email database file written by my AIR app inside of the storage directory. What can I do with this file? With Zinc+MDB file, I needed only to hand this file over to someone with MS Acces skills to do whatever needs to be done with the data. MS Access won't open the file made by the AIR app. What are my options?
SQLite is a fairly popular database library/engine but in the majority of cases it is used as an embedded database -- in other words, it's used internally by an application rather than as a file that's shared among users. For instance, Firefox uses SQLite behind the scenes for bookmarks, history, etc.; Adobe Lightroom uses SQLite behind the scenes for it's image catalogs; and so forth. Not that you can't use a SQLite database as the "file format" for your application, and share those db files between users of your application. That's one of the intended use cases of the database for AIR, although in fact I don't know of any case where someone's actually done that.
Some developers have written tools for administering SQLite databases and for viewing/editing data in them. For instance, my personal preferred tool for creating/managing AIR SQLite databases is "Lita":
http://www.dehats.com/drupal/?q=node/58
However, Lita is not nearly the same as Access, in that Access provides not only the database engine but also a scaled down app development platform, including forms, reports, VB code, etc. As far as I know nobody's created anything that complex for SQLite databases (AIR-specific or otherwise).
So I guess it depends a lot on what "do whatever needs to be done with the data" means. If you want a tool that people can use to open a SQLite database file created in AIR, that has some sort of report-builder functionality ... as far as I know that doesn't exist. The exception would be if the person creating the reports knows SQL, in which case they could use Lita or another tool such as my own "Run!" AIR SQLite query runner tool:
http://probertson.com/projects/run-air-sqlite-query-testing-tool/
But of course there could be a SQLite-based Access-like application out there that I don't know about.
AIR works great with MP4 (H.264) files. However, I could use very old/inexpensive hardware to run MPG2 files in Zinc (which uses directx to open an instance of Windows Media Player, sans WMP interface.) Per my testing, these same machines will not run a similar quality MP4 video. Am I overlooking another AIR option?
AIR can use any of the video formats supported in Flash Player. In addition to H.264, it also supports FLV video, including On2 VP6 and Sorenson Spark encoded video.
Can AIR do this? Maybe with launching a BAT file?
It sounds like part of this question got cut off. However, I can say that an AIR app can't launch a BAT file (or any other executable), if that answers your question.
We often have a thermal printer in our kiosks. Zinc provided a way to print something without the pesky Windows print dialog. Does AIR provide a similar solution?
No.

Replaced zd8000 motherboard and need some troubleshooting help please............

Hello All,
I just replaced the motherboard on our HP zd8000 (pentium 4, 3.0ghz, 2gb ram, Win XP) with a used but tested good MB and need some help with the following.
1) I now cannot play DVD movies as the error no "dvd decoder" present which was not an issue before? Where can I go to get a free decoder that will work, as Windows only shows paid versions? We have the dvd burner/reader with lightscribe. SOLVED! CNET HAD DECODER.
2) The internal temperature, according to SpeedFan, is running around 140 degrees with just some Internet browsing. Is that a normal temperature because I only have one of three fans running on the laptop? Is there anyway of making all three fans run to be sure there are no issues? I am positive I hooked up everything but again only one fan seems to be running?
3) I discovered some of the pins were damaged in the card reader. I may get the Seller to give me a discount, no intention of tearing it apart simply for that, but is there any concern of short or otherwise?
4) Our battery stopped charging years ago, these were notorious for such, but I purchased a new one last year and hoped the replacement MB would allow charging again. No such luck though. Is there anything I can do, BIOS update etc, to make the battery charge?
5) Anything you folks can think of for me to test to insure the new motherboard is working properly?
Thanks, Ralph
P.S. This was a correct replacement board according to MB serial numbers. Everything else seems to be functioning properly other than mentioned. Our graphics went out on the original MB.
This question was solved.
View Solution.

Some of the wires had pushed out of the harness that connected the other two fans. I double checked and re-attached those so now the laptop is running quite a bit cooler.
EVERYTHING IS GOOD TO GO!

Need some basic help with applets

Hey all, I've never made an applet before and I'm having a small problem. Basically, when I load my applet, the GUI comes up on a separate window (doesn't load within the applet window). Here's my code:
Here's the GUI class.
import java.awt.BorderLayout;
import java.io.File;
import java.util.Vector;
import javax.swing.DefaultComboBoxModel;
import javax.swing.DefaultListModel;
import javax.swing.JButton;
import javax.swing.JFileChooser;
import javax.swing.JList;
import javax.swing.JScrollPane;
import javax.swing.JTextField;
import javax.swing.JTextPane;
import javax.swing.ListModel;
import javax.swing.WindowConstants;
import javax.swing.SwingUtilities;
* This code was edited or generated using CloudGarden's Jigloo
* SWT/Swing GUI Builder, which is free for non-commercial
* use. If Jigloo is being used commercially (ie, by a corporation,
* company or business for any purpose whatever) then you
* should purchase a license for each developer using Jigloo.
* Please visit www.cloudgarden.com for details.
* Use of Jigloo implies acceptance of these licensing terms.
* A COMMERCIAL LICENSE HAS NOT BEEN PURCHASED FOR
* THIS MACHINE, SO JIGLOO OR THIS CODE CANNOT BE USED
* LEGALLY FOR ANY CORPORATE OR COMMERCIAL PURPOSE.
public class GUI extends javax.swing.JFrame {
          //Set Look & Feel
          try {
               javax.swing.UIManager.setLookAndFeel("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
          } catch(Exception e) {
               e.printStackTrace();
     private JButton openB;
     private JButton oddsB;
     private JScrollPane jScrollPane1;
     private JList jList1;
     private JTextField fileText;
     private Vector<String> jList1Objects;
     * Auto-generated main method to display this JFrame
     /*public static void main(String[] args) {
          SwingUtilities.invokeLater(new Runnable() {
               public void run() {
                    GUI inst = new GUI();
                    inst.setLocationRelativeTo(null);
                    inst.setVisible(true);
     public GUI() {
          super();
          initGUI();
     private void initGUI() {
          try {
               setDefaultCloseOperation(WindowConstants.DISPOSE_ON_CLOSE);
               getContentPane().setLayout(null);
                    //Text field for file entry
                    fileText = new JTextField();
                    getContentPane().add(fileText);
                    fileText.setBounds(0, 0, 279, 25);
                    //Scroll Pane and jList1
                    jScrollPane1 = new JScrollPane();
                    getContentPane().add(jScrollPane1);
                    jScrollPane1.setBounds(0, 25, 150, 328);
                         jList1Objects = new Vector<String>();
                         jList1 = new JList(jList1Objects);
                         jScrollPane1.setViewportView(jList1);
                    //Open button and Odds button
                    openB = new JButton();
                    oddsB = new JButton();
                    getContentPane().add(oddsB);
                    getContentPane().add(openB);
                    oddsB.setText("Calculate Odds");
                    oddsB.setBounds(679, 109, 105, 353);
                    openB.setText("Open File");
                    openB.setBounds(279, 0, 99, 25);
                    //Open Button action
                    openB.addActionListener(new java.awt.event.ActionListener() {
                         public void actionPerformed(java.awt.event.ActionEvent evt) {
                              //Opens up hand history file to be read in
                              JFileChooser fc = new JFileChooser();
                              fc.setCurrentDirectory(new File("C:\\Program Files\\Full Tilt Poker\\HandHistory"));
                              int returnVal = fc.showOpenDialog(getContentPane());
                              if(returnVal == JFileChooser.APPROVE_OPTION) {
                                   //Display file in text box
                                   fileText.setText(fc.getSelectedFile().toString());
                                   //TODO: Write function to read in file and add all Hands to jList1
                                   //Recompile jList1
                                   jList1Objects = new Vector<String>();
                                   jList1Objects.add(fc.getSelectedFile().toString());
                                   jList1 = new JList(jList1Objects);
                                   jScrollPane1.setViewportView(jList1);
               pack();
               setSize(800, 800);
          } catch (Exception e) {
               e.printStackTrace();
}Here's the class my HTML file calls:
import java.applet.Applet;
import javax.swing.JFrame;
public class Main extends Applet{
     //Mainframe
     //JFrame f = new JFrame();
     public void init() {
          GUI inst = new GUI();
          inst.setLocationRelativeTo(null);
          inst.setVisible(true);
          //f.setContentPane(inst.getContentPane());
     public void start() {
        System.out.println("Starting...");
public void stop() {
        System.out.println("Stopping...");
}

// <applet code='Main' width='400' height='200' ></applet>
import javax.swing.*;
public class Main extends JApplet{
    public void init() {
        GUI inst = new GUI();
        getContentPane().add(inst.getContentPane());
        validate();
    public void start() {
        System.out.println("Starting...");
    public void stop() {
        System.out.println("Stopping...");
}Other notes:
- You try to set the PLAF to Windows. which will not work on Linux and Mac (and if it did, the users would be screaming at you).
- setLayout(null)/setBounds(int,int,int,int) is rubbish GUI development, it is fragile and will cause problems (especially if changing PLAFs)
- Why did you not code this as a hybrid application/app?
- The call to the JFileChooser will require a trusted applet, and it is pointing to the wrong place in seeking out the 'Program Files' directory, better to put configuration data/history data in a sub-dir or user.home.
- This app. is much better suited to being deployed using Java Web Start. Forget the applet and use the frame, persistence can be obtained through the PersistenceService and that will side step both the application needing 'trust' and trying to find a suitable path for storing results of past games. JWS can launch the app. directly off the net, and provides auto-update and many other slick features.

Started with a networks project,needed some basic help.. (Newbie)

Hi all,
Im planning on writing an app that will communicate with my server and a telecom gateway... Which will send and recieve data...
Im a beginner to java itself and have taken this up as a project.
I would like to know what needs to be learnt(Im familiar with OO concept and have done a bit on java for now, but not this extent.)
Primarily I will be dealing with mulit-threading and so on.
Could you please point me out to some details...
If this info is not sufficient ,I'll provide more.
Regards

You will find that google is very useful if you are getting started.
[http://www.google.co.uk/search?q=java+tutorial+networking]
[http://www.google.co.uk/search?q=java+examples+networking]
[http://www.google.co.uk/search?q=java+tutorial+threading]
[http://www.google.co.uk/search?q=java+examples+threading]
If you have question, try searching for it as the question will have been asked before.

Need Some Basics to go with IPC

Hi,
I am truing to get some knowledge on IPC, and I am not at all familiar with User Exits. I am going through this document. PricingUserexitManualV104.pdf, and it is really confusing, for a person who is not aware of user exits.
Also lack of CRM knowledge is causing me trouble...
So I am here for help...
Can some one explain me these things...
1. step/counter level
2. condition access step level
3. base value of a condition
4. scale base value
5. condition value
6. pricing condition that can be fixed
7. document copy
And while going through types of user exits, I have the following doubts...
What is the difference between Type A and Type C user exits? From the document, both are multiple active implementations, but Type A requires formula numbers for execution of userexit, and type B, we assign a dummy formula number....
The doubt is what is the difference if both requires formula numbers, and if each userexit is considered as one formula, how do we assign formula number to userexit?
It will be really helpful for me to go ahead with IPC... some one please help me with these doubts...
Thanks and Regards,
Chinnu

Chinnu,
pricing in CRM/IPC is very similar to pricing in ERP SD. You need to know the underlying concepts to be able to properly set up (or transfer) user exits.
I suggesting starting with
http://help.sap.com/saphelp_erp60/helpdata/en/dd/56168b545a11d1a7020000e829fd11/frameset.htm
The IMG documentation might also be helpful.
The number of user exits of scope A is not arbitrary, but relates to e.g. (type VAL) a formula number for a condition value in the pricing procedure. So the number is like an ID. For scope C, the numbers only define a sequence.
Michael

Need some basic help with Acrobat and LiveCycle

This is my first time using Acrobat and LiveCycle to design a form. Basically all I need is a title that is uneditable and underneath that I want to insert a text box so people can type in the box then print off the whole page with their comments. I can do all of that except the problem is when I insert the text box, the cursor is left justified but appears in the middle of the textbox. So when people start typing, there is a huge gap between the title and what they've typed. I want their typing to appear directly under the title. What am I doing wrong? See attached for a visual explanation. Thanks.

You can have the text in the field top jusitied. This is controlled on the Font palette. Turn on the Font palette under the window menu. It usually will appear in the bottom right corner of the screen. Now highlight the field you want to adjust. Make usre the paragraph tab is slected. Click on the small dropdown arrow indictaed in yellow in the screen shot and select "Edit Value". Now click the top justification as indicated by the arroe in the csreen shot.
Paul

Lenovo A6000 Softbricked? Needs some serious help--Please

Hi My A6000 phone got factory reset and then I tried to recover some lost pics...but I was advised that my phone needs to be rooted first, so the software opened kingo root soft, It showed me the message that phone has been rooted and when it rebooted there was a notification of software update which I said ok and ever since then the phone is stuck on system recovery mode (not sure if it is called soft brick or not) and I have tried many things including choosing all the options starting from reboot system now, apply update from ADB, wipe data/factory reset, wipe cache partition, apply update from sdcard but nothing seems to work!!! oh I for got to mention on the top of the screen it says Androoid system recovery <3e>Kraft -A6000_S035_150507 and then gives all the option and i have tried this following : https://boycracked.wordpress.com/2015/06/03/unbrick-lenovo-a6000/ but some how for the first solution it keeps on saying download failed, emergency recovery download failed...anyways it does not work Is there any soultion to this!!! Please help if there is one!

it worked the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all

Renting movies - some basic answers please

Hi, I've never rented a movie before and have just a couple simple questions. The basic info on the help pages didn't answer my questions so if someone could please help, I'd appreciate it.
So you have 24 hours to watch a rented movie, once you begin playing it. What about on your iPod? Does the same restriction apply on the iPod? Can I begin watching it on my computer and then finish it on my iPod or vice-versa, or do I need to watch the whole thing on only one device? Does the 24-hour period begin once I transfer the movie to the iPod? What if I transfer the movie to the iPod and then don't watch it - can I transfer it back to my computer?
Thanks for helping.

The 24 hour viewing period begins the moment you press Play. I believe that you can transfer it from device to device within the 24 hour period. The movie can only be on one device at a time, however.

Need some basic Thread Help

Hello everyone,
I've recently been working on a game project with network capabilities.
I need to be able to send data to a client and vice-versa for both a client and a host.
Say whenever a player moves a character it should send the new coords, etc to the other person
I have all the networking through a Host and Client class done already, with methods like sendData(String[] data) and getData(). What I need is some sort of update thread in the main program to send this data without stopping the flow of the program.
I was thinking maybe a inner class inside the main program which extends a thread but I'm not sure how to implement that.
Please help if you can. Thanks.
P.S - Would maybe making the Host and Client classes extend Thread work too?
(Then I can do all the threading inside there instead)

dekenx wrote:
Hello everyone,
I've recently been working on a game project with network capabilities.
I need to be able to send data to a client and vice-versa for both a client and a host.
Say whenever a player moves a character it should send the new coords, etc to the other person
I have all the networking through a Host and Client class done already, with methods like sendData(String[] data) and getData(). What I need is some sort of update thread in the main program to send this data without stopping the flow of the program.Sounds like a producer/consumer pattern. You produce move data, put it on a queue, and go on with the game. Meanwhile, a consumer thread reads from the queue of move data and pushes it over the network to the other side.
I was thinking maybe a inner class inside the main program which extends a thread but I'm not sure how to implement that.
Please help if you can. Thanks.
P.S - Would maybe making the Host and Client classes extend Thread work too?
(Then I can do all the threading inside there instead)The inner class or deciding which class to have extend Thread are implementation details you shouldn't be thinking about until you have a good understanding of the overall approach.
Having said that, you should almost never extend Thread, since you're not creating a specialized kind of Thread class. You're just creating a task to be run in a separate thread, so implement Runnable. Or use an Executor from the java.util.concurrent package.
I would also probably not use an inner class for this.

Array to grid works but need some help. Please help the beginner...

Hi,
I'm very green at this...
I've been trying to display a two-dimmensional array on a dataGrid and finally found some code that I was able to modify to my needs.
However couple things I don't understand.
1. Do I need the <s:itemRenderer>...</s:itemRenderer> section to display the data? Can this be simplified?
   I don't need to change the default look of the columns etc. However it looks like the grid will not populate without that prepare() function.
   Why isn't this sufficient to populate the grid? -> dataGrid.dataProvider = new ArrayCollection(dataArray);
2. The number of columns is hardcoded (3) and their headings are as well (N1, N2, N3).
   Can I show/hide columns at runtime based on number of columns in my array?
   Can I rename the column's headings at runtime?
Thanks,
Tom
here's the code:
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:mx="library://ns.adobe.com/flex/mx"
xmlns:s="library://ns.adobe.com/flex/spark" title="HomeView">
    <fx:Script>
        <![CDATA[
            import mx.collections.ArrayCollection;
            import spark.components.gridClasses.CellPosition;
            import spark.components.gridClasses.CellRegion;
            // Create a dataProvider whose items are arrays of 6 random numbers.
            // The DataGrid's item renderer will display item[columnIndex].
            private function initializeDataProvider():void
                const nRows:int = 10;
                const nCols:int = 3;
                const dataArray:Array = new Array(nRows);
                for (var row:int = 0; row < dataArray.length; row++)
                    var values:Array = new Array(nCols);
                    for (var col:int = 0; col < values.length; col++)
                        values[col] = Math.round(Math.random() * 10);
                    dataArray[row] = values;
                dataGrid.dataProvider = new ArrayCollection(dataArray);
        ]]>
    </fx:Script>
    <s:DataGrid id="dataGrid" selectionMode="singleRow" initialize="initializeDataProvider()">
        <s:itemRenderer>
            <fx:Component>
                <s:DefaultGridItemRenderer>
                    <fx:Script>
                        <![CDATA[
                               override public function prepare(hasBeenRecycled:Boolean):void
                               label = data[columnIndex];
                        ]]>
                    </fx:Script>
                </s:DefaultGridItemRenderer>
            </fx:Component>
        </s:itemRenderer>
        <s:columns>
            <s:ArrayList>
                <s:GridColumn headerText="N1" width="50"/>
                <s:GridColumn headerText="N2" width="50"/>
                <s:GridColumn headerText="N3" width="50"/>
            </s:ArrayList>
        </s:columns>
    </s:DataGrid>
    <s:Button id="cmd" x="128" y="502" width="122" label="Button" click="initializeDataProvider()"/>
</s:View>

Hi fouriron,
Does this help?
Formula in E2 (and Fill Down)
=IF(D2<10,10, D2)
If a value in column D is less than 10, then insert 10, else insert the value from column D
The "correct" value (SUM) is in column D
The "required" Answer is in column E
Regards,
Ian.

Complete Novice Needs Some Basic Help

Hi!
I'm sorry to clutter up the discussion with such basic questions, but what I want to do is get something from a cassette tape to my iPod. I'm told I can do this through GarageBand, and I have an audio cable that the guy in the Apple store said I would need. I'm not even sure where to plug this cable in. So any help in where I plug this in, or what I do next would be tremendously appreciated. If someone could even tell me where to look for help that would be great (when I look in GarageBand help its saying something about MIDIs and I don't even know what that is). Eternal gratitude for any help....

Oh man, this is frustrating and I might give up soon!
So in System Preferences, Sound I have 2 things,
Internal Microphone (port is Built-in) and Line In
(port is Audio line-in port). I can't seem to
select one or the other, they're just there.
Yeah, there is no "apply" or "OK" or anything like that. Just click on the Line-In so that it is highlighted and close the system preferences. That takes care of that. My PB G4 automatically detects when I plug in my line-in now that it is set up.
Then in GB preferences, I only have the option of
Built-in Audio, there is no other option.
Built-In audio is correct in GB prefs.
I also couldn't find where you were saying to
double-click...what's the track header? I've clicked
everything and can't find a monitor drop down menu
option.
The track header is the left-hand side of the track where there is a small speaker or instrument. For what you are doing, you need to create a new basic track. (Under "Track" in the menu bar, click "New Basic Track") You should have a new blue track that is labeled "No Effects." Double click on the speaker image and a dialog box will appear. Right in the middle of this box there are options for Input, Volume, and Monitor. You can turn on and off monitor abilities here.
On the plus side, the connector I have seems to
work...its male/male 1/8".
Perfect.
Thanks again and if you want to bail out, I
completely understand!
Hang in there. We were once all newbies to this digital recording stuff too.

Need some help quickly, please!

I'm not exactly sure where to post the following, so I'm sorry if it's in the wrong place!
So I helped my sister order an iBook and an iPod nano thinking the nano qualified for the Free iPod promotion. Anyways, it's not qualified so I want to cancel it.
So here's where I'm unsure about some stuff:
After I realized it wasn't part of the promotion, I went to my order status (my sister's actually, I made her an account) to try to cancel the nano. There was no button to review or change it.
I noticed the status of the iBook said 'shipped' and the nano was 'processing order'. I'm guessing there was no change/review button because the iBook was shipped already? The Apple Customer Service closed and the order status on the nano changed to 'preparing shipment'.
Ok, so, I'm gonna need to call Apple Customer Service in the morning and would like to know:
What are my chances of being able to cancel it? By the way, the nano needs to be custom engraved so I'm hoping I can get it canceled before it does. Also, do you think I will be able to change the nano to the mini and still qualify for the promotion?
Oh, one more thing: I am calling on behalf of my sister, so am I still able to cancel it for her? I do have all of the neccessary information.
Any replies would help! the anxiety is getting to me!

I ordered an iBook with extra 20Gb and an engraved iPod on 4th September. From the second after I ordered it until it was "shipped" the tracking system said it was "processing order". It was "shipped" 4 days later on 8th September. There was no in between such as "sent to manufacturing" or anything like that and believe me I was checking every hour of every day almost!! The tracking showed that my iBook was ready before my iPod and was shipped on its own to Europe without the iPod. The iPod significantly held the order up (I'm assuming it was cos it was engraved) so chances are you can still cancel it. Only thing is, even if you can cancel it, you may not qualify for the £100 rebate unless you can get them to actually change it to an iPod mini as you have to have them both appear on the same invoice in order to qualify. So if they say you can cancel it and then suggest you place another order for the mini separately that will be no good.
My book and pod eventually arrives on 19 Sep, 15 days after I placed the order in case you're interested.

Need Very Basic Instructions, Please!!

Please excuse my total ignorance, take pity. I am having trouble with apparently basic Reader usage. I have scoured Help and still have questions. Is there a Reader for Dummies type info. I have missed??

You can also view the help files which are the manuals for the program.
It is not Reader for Dummies, since Adobe thinks more of the people who
use their software. You can really find the information quite helpful.
Mike

I need some questions anserd PLEASE HELP

yo all, i have a 30gig ipod video and i have some questions which are hacking at my brain. i hope i can get some ansers
#1 apparantly, when i update itunes it wipes my libary clean? is this true?
#2 E.G:i go to my friends house, to get some songs, but he has a mac, and i have a pc, and when you download songs from your friends mac.. apparantly it wipes all your songs
since you have a pc and he has a mac! T OR F?
#3 when i connect my ipod it updates, but when itunes says "Ipod update complete, OK to disconnect" my ipod still says "Do not disconnect" is it really ok to disconnect?
#4 i have about 450MB used up on my ipod..and theres a thousand MB to a GB, correct? in itunes it says i have 26GB left when i havent even use up one!(although, i have itunes 6..and theres 6.3 or something..but i dont want to update due to question 1#!)

Hello ipodsrock_thecasba,
#1 Absolutely not true
#2 False. The songs are not being wiped because you have a pc and he has a mac. The songs are being wiped because you say yes to the message that pops up saying "this ipod is linked to another library, do you want to link it to this library?"
Read this for tips on using your ipod with multiple computers:
http://docs.info.apple.com/article.html?artnum=61675
#3 Not always. Could be another music program on your computer capable of reading the ipod is doing just that. Could be an antivirus program is scanning the ipods disk. If you can feel/listen to the ipod and the disk is not being accessed/spinning it should be safe to disconnect (you may need to reset the ipod afterwards).
http://docs.info.apple.com/article.html?artnum=93492
#4 Read this (particularly the third section "One more thing about iPod disk size"):
http://docs.info.apple.com/article.html?artnum=60955
Hope that helps
EDIT: Dude calm down. 8 minutes after posting your question and you are screaming for answers. I almost wish now that I had not bothered to take the time to even try to help.

Need Some Basic Directions, Please

Similar Messages

Maybe you are looking for