Need some clarification please
Aloha all. I've been searching these forums, and the support pages, buy can't seem to get the info needed.Even though it seems like a no-brainer. I have the original iPhone, but am up to date system wise. My question is, is it possible to save sms/text messages? If so an explanation of how to go about it would be very much appreciated. Mahalo for any tips, info. JB
Never mind, figured it out.
Similar Messages
-
HD Workflow - Need Some Clarification Please
Apologies for asking another question so soon, but I need some help with my import/export workflow please.
So I've just upgraded to AE CS4 from 6.5 Pro.
I'm doing a show where I'm using XDCAM EX footage with cgi shots and elements, all comped in AE. The shots will be handed to the editor, who uses FCP, as Quicktime files, I think. This is where I need some help.
I have read and re-read (several times) the 'Color Management Workflow in Adobe After Effects CS4' pdf, specifically the 'High Definition Video Workflow' section. I am using a calibrated monitor (regularly calibrated and checked with a Spyder 3 Elite).
I get setting up the AE project to be colour managed to the HDTV (Rec. 709) working space, and I likewise understand using Interpret Footage to colour manage assets that are imported.
Where I'm falling down is outputting the finished shots to QT movies, specifically on two points: the apparent gamma of the output (as I see it in the QT Player), and the data-rate.
I understand setting the output to have the same profile in the Output Module of the Render Queue. But from there I'm stumped, because the QT outputs don't visually match the AE comp, with almost any codec I try. I understand there are QT codec issues when outputting from AE - I was reading about those the other day when I was hitting the same problem in AE 6.5. When I open the QT movie on the desktop (Windows XP Pro) it's invariably alot lighter, lower contrast. Along with the other issue that the data-rate of the QT output from AE is anything up to 8 times greater than I need.
I tried rendering Animation and PNG movies from AE, then feeding those through the Media Encoder, outputting via H.264 to get an MP4 with the data-rate around 50mbits/sec. That works on that, but again the movie is pretty washed out and low contrast.
I guess this is pretty fundamental stuff, but I've hit a brick wall over what to do. I'd appreciate any advice on the workflow to output the finished comps to hand to the editor, as a movie file, QT or whatever. And obviously knowing that what I see in my AE comp is what he will see on his FCP suite.
Julian.Thanks for the additional comments and ideas.
In terms of profile, as I mentioned, the intermediates will be going off to the editor (off-site) for editing on his FCP suite. I'll stick to working in the prescribed HDTV (Rec. 709) space, and I've given him all the detail I can of how I'm working, but crucially I haven't stood at his edit-suite to see how the stuff looks.
But, he's no newbie, so I'm hoping it'll be OK.
Blasted shame about the H.264 BluRay not being compatible with QT - I thought I had this whole issue beat until that came along. It's not a matter of disk space here, but the editor is mithering that the intermediates we are testing, in either PNG, or Animation, and a couple of others, are choking his playback.
I'm not sure what to say about that, other than to go down this road of trying to squish these intermediates as low as possible without wrecking the look, hence finding that the DNxHD is providing the best solution. If it had been a SD project, I might well have tried the native H.264, even over our normal PNG workflow.
So what will play the native H.264 BluRay compressed output?
Julian. -
Need some clarification on Replacement Path with Variable
Hello Experts,
Need some clarification on Replacement Path with Variable.
We have 2 options with replacement path for characteristic variables i.e.
1) Replace with query
2) Replace with variable.
Now, when we use "Replace with variable" we give the variable name. Then we get a list for "Replace with" as follows:
1) Key
2) External Characteristic Value Key
3)Label
4)Attribute value.
I need detailed explanation for the above mentioned 4 options with scenarios.
Thanks in advance.
Regards
LavanyaHi Lavanya,
Please go through the below link.
http://help.sap.com/saphelp_nw70/helpdata/EN/a4/1be541f321c717e10000000a155106/frameset.htm
Hope this gives you complete and detailed explaination.
Regards,
Reddy -
Need some clarifications on Quality-of-services
Hi Everybody.
I need some clarification on Quality-of-services.the question is which one is better in Quality-of-services (Exactly-Once or Exactly-Once-In-order)?why?wht is the differenc between them?Hi Narayana
refer the below Urls
make the QOS of file as EO or EOIO and then use this blog,
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
It depends upon the Adapter,Can you please spicific
http://help.sap.com/saphelp_erp2005vp/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/content.htm
Check these blogs written on QoS:
XI Asynchronous Message Processing: Understanding XI Queues
How to deal with stuck EOIO messages in the XI 3.0 Adapter Framework
EO = Exactly Once ( Used in Asynchronous Communication)
EOIO = Exactly Once In Order ( Used in Asynchronous Communication)
BE = Best Effort ( Used in Synchronous Communication)
Best Effort --> Used for Synchronous Calls.
EO and EOIO --> Asynchronous Calls.
EOIO --> Asynchronous with Sequential Processing Guranteed.
http://help.sap.com/saphelp_nw04/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/frameset.htm
For the QOS, u can refer the following library links .
http://help.sap.com/saphelp_nw04/helpdata/en/41/b714fe5ffc11d5b3ea0050da403d6a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm
For receiver channels QoS BE (Best Effort) will result in a
synchronous call (sRFC) , QoS EO (Exactly Once) will create a
transactional call (tRFC) to the BC. For sender channels a synchronous
call (sRFC) will result in a message with QoS BE, a transactional call
(tRFC) will result in a message with QoS EO.
QoS EOIO is not supported by the BC-Adapter.
SAP XI term Quality of service describing how the transmission and process-ing of messages is to be handled. Possible values are:
BE = BestEffort (synchronous call, no transactional guarantees for transmission and processing)
EO = ExactlyOnce (asynchronous call, guarantee for local transactional handling, exactly-once transmission and exactly-once processing)
EOIO = ExactlyOnceInOrder (as for EO but with serialization guarantee on a given queue name).
<b>Pls reward if useful</b> -
Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now. -
Hi! I got Movies on my external hard drive that are AVI kind and won't play on my macbook pro? When I start playing the movie a message pops up and says "a required codec is not available". I tried flip4mac, xvid, divx already and still not playing my video. need some help please!! thanks.
Although vlc mentioned above is a much more powerful and better player you could try installing Perian if you insist on using the quicktime player. It may supply the codec it needs.
Not sure why you wouldn't be able to play straight avi files though in quicktime. -
Just needed some clarification regarding the Viewer Builder and actually publishing your App...
If someone could let me know if my understanding is correct, that'd be a huge help... So I've designed my publication in InDesign and exported the .zip file from the Folio Producer. I've created all of my certificates/splash screens/icons. Lastly, I just recently went through the steps of the Viewer Builder. I'm now at the stage of this process that requires me to purchase the $395 single edition so that I can enter the serial number in the last stage of the Viewer Builder. Now, to my knowledge, once I get the serial number, Viewer Builder will then give me access to an .ipa file and a .zip file. The .ipa file is for me to test on my iPad, and the .zip would be used to distribute to the App Store. I guess this is where I get confused... Let's say after I test the .ipa on my iPad, I don't like some part of my publication. I know how to update my own documents obviously, and I understand that I would have to export another .zip file from the Folio Producer, in turn requiring me to edit the exported folio link in the Viewer Builder. If I had to do that, would I need to purchase another single edition serial number since the original App was edited? Or would the same serial number apply since I'm editing that same App in the Viewer Builder? My next question is somewhat similar. Let's say all of the information is up to date and I go ahead and publish the App to the App Store. However, maybe a month later or some time in the future, I needed to update a phone number or email address--some little detail like that. Again, I understand that I'd have to update the export link in the Viewer Builder, but would I then need to create a new app since my app was already published? Would I then have to purchase another $395 single edition serial number just so that I can update my information? This seems to be the only thing in this whole process that I could use some clarification on so that I don't run into any surprises in the future. Any help would be great, thanks!
Hi Joshua,
When you have purchased the serial, you can rebuild your app with your updated content, as long as you use the same bundleID (applicationID), that is tied to your Apple mobile provisioning profile. The serial number is valid for a one year period.
After you have submitted your app to Apple and it has been approved, please read: http://forums.adobe.com/message/4172167#4172167
With kind regards,
Klaasjan Tukker
Adobe Systems -
Ok i got my iPod from my brothers friend and my IPod says "iPod is disabled connect to iTunes" then my computer says cannot get onto iPod because I need the iPod passcode and of course I cannot put it in so I need some help please
Try placing in DFU mode and then restoreing.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I am new to LR and needs some advice please
I have been using Raw shooter and have been shy of going over to LR.I am not a hugely knowledgeable user nor that technically minded. I purchased Scott Kelbys, and Martin Evenings book on LR and am learning as I go, I have been reading several threads on this site and I am concerned about all the negativity I am reading about LR being buggy, with problems?
and how it seems that Adobe are not doing enough with LR to address any such issues? I am a canon user and issues relating to Canon raw are a particular worry. I am about to put my entire collection from Raw shooter ( On External LAcie drives) into the hands of LR in the future. Is this a wise decision? Please help.
Also I want to get started if it is the right thing to do, my PC is getting on abit, with 4 yr old tech inside and only 1gb ram. I will soon get somthing more powerful with 2-4 gb ram. my second question is this. I will be running my libraries on external drives only ( LAcie F.A. Porsche).
If I have imported my images without moving folders, with LR 1.2 loaded on my pc. If later I remove LR from it and reload onto a new PC will it see all my libraries again and know all my settings again without issue and without having to re-do everything. If that is the case then I had better wait until i upgrade the Pc, before I start any work with LR, which will be frustrating.??
Apologies for a long question, but I am technically challenged. If anyone can assist me in these areas I would be grateful
Paul AppsLR is not buggy and it converts Canon RAW files just fine. I run LR on a PC without any significant issues except speed. LR is too slow in some areas (importing images, browsing thumbs and previews, in particular) compared to other programs such as Photo Mechanic and ACDSee, but it is very stable on a clean computer. Many features need improvement but hopefully that will come in time. Meantime LR is quite good and I bet you will like it. There is nothing better overall.
You should never risk your images to any software or anything else. Keep a backup copy of your originals separate from the copy you use for LR or other software. Plus LR is a non-destructive editor (pixels are not changed) so your images will be quite safe.
As Tomrock said you can transfer your database to a new computer without difficulty. I do recommend a new computer, a 4 year old machine with 1gb RAM will probably be frustrating. Other folks say that a quad core processor and at least 2GB RAM is the way to go. My 2 year old dual core Pentium with 4GB RAM is definitely too slow for LR. You might also consider switching to internal hard drives in your new computer and use your external drives for backups. Internal drives for your images and catalog file will be much faster.
Also Tom's advice about importing a few images at a time and then testing how things work is very good. It is definitely a mistake to import a huge volume of images until your are familiar with LR. It is very easy to delete a small catalog file and start over since a few hundred images imports quickly.
Good luck. -
Hi everyone!
I guess this is the first time I'm actually opening a topic here, but I've actually been around for a little while :)
So, I'm working on this case for one of my classes. I have most of it already written, but there are a few things I'm trying to figure out and need help with. I'm supposed to write a class called ChatModel to hold ChatMessage Beans, such that:
Http://img267.imageshack.us/img267/8639/case2uml.jpg
Now here is the Bean I wrote. Nothing fancy :P
[code=java]
import java.util.*;
public class ChatMessage {
private String from, to, message;
private Date sent;
public ChatMessage() {
from = null;
to = null;
message = null;
sent = null;
public ChatMessage(String from, String to, String message, Date sent) {
this.from = from;
this.to = to;
this.message = message;
this.sent = sent;
@Override
public int hashCode() {
final int prime = 31;
int result = 1;
result = prime * result + ((from == null) ? 0 : from.hashCode());
result = prime * result + ((message == null) ? 0 : message.hashCode());
result = prime * result + ((sent == null) ? 0 : sent.hashCode());
result = prime * result + ((to == null) ? 0 : to.hashCode());
return result;
@Override
public boolean equals(Object obj) {
if (this == obj)
return true;
if (obj == null)
return false;
if (getClass() != obj.getClass())
return false;
ChatMessage other = (ChatMessage) obj;
if (from == null) {
if (other.from != null)
return false;
} else if (!from.equals(other.from))
return false;
if (message == null) {
if (other.message != null)
return false;
} else if (!message.equals(other.message))
return false;
if (sent == null) {
if (other.sent != null)
return false;
} else if (!sent.equals(other.sent))
return false;
if (to == null) {
if (other.to != null)
return false;
} else if (!to.equals(other.to))
return false;
return true;
public String getFrom() {
return from;
public void setFrom(String from) {
this.from = from;
public String getTo() {
return to;
public void setTo(String to) {
this.to = to;
public String getMessage() {
return message;
public void setMessage(String message) {
this.message = message;
public Date getSent() {
return sent;
public void setSent(Date sent) {
this.sent = sent;
The ChatMessage class works as intended. Now here is what I have for the ChatModel class.
[code=java]
import java.util.*;
public class ChatModel {
private HashMap<String, TreeMap<String, ChatMessage>> messages;
public ChatModel(){
messages = new HashMap<String, TreeMap<String, ChatMessage>>();
//adds the ChatMessage Object to messages
public void addMessage(ChatMessage aMessage){
//Checks if the key is already in the map, then adds the ChatMessage object accordingly
if(messages.containsKey(aMessage.getTo()) == false){
messages.put(aMessage.getTo(), new TreeMap<String, ChatMessage>());
messages.get(aMessage.getTo()).put(aMessage.getSent().toString(), aMessage);
public ArrayList<ChatMessage> getMessagesFor(String name){
ArrayList<ChatMessage> listOfMessages = new ArrayList<ChatMessage>();
if(messages.containsKey(name)){ //if the String is contained in the HashMap
Iterator<ChatMessage> iterator = messages.get(name).values().iterator();
while(iterator.hasNext()){
listOfMessages.add(iterator.next());
for(Map.Entry<String, ChatMessage> entry : messages.get(name).entrySet()){
listOfMessages.add(??);
else {
//throws an exception if the key is no in the list.
System.out.println("not found.");
return listOfMessages;
when I run this in the main method of ChatModel (just to test it)
[code=java]
public static void main(String[] args){
ChatModel testModel = new ChatModel();
ChatMessage message1 = new ChatMessage("Ben", "Bob", "Hello World!", new Date());
ChatMessage message2 = new ChatMessage("Bob", "Ben", "Hey There!", new Date());
ChatMessage message3 = new ChatMessage("Ben", "Bob", "How are you?", new Date());
ChatMessage message4 = new ChatMessage("Jack", "Bob", "What's up", new Date());
ChatMessage message5 = new ChatMessage("Bob", "Jack", "Not much, What's up with you?", new Date());
ChatMessage message6 = new ChatMessage("Jack", "Bob", "nothing", new Date());
ChatMessage message7 = new ChatMessage("Lucas", "Ben", "Are you there?", new Date());
ChatMessage message8 = new ChatMessage("Ben", "Lucas", "Yep, sup?", new Date());
ChatMessage message9 = new ChatMessage("Lucas", "Ben", "can I have your siser's number?", new Date());
testModel.addMessage(message1);
testModel.addMessage(message2);
testModel.addMessage(message3);
testModel.addMessage(message4);
testModel.addMessage(message5);
testModel.addMessage(message6);
testModel.addMessage(message7);
testModel.addMessage(message8);
testModel.addMessage(message9);
System.out.print("is Ben in testModel? ");
System.out.println(testModel.messages.containsKey("Ben"));
System.out.print("is Lucas in testModel? ");
System.out.println(testModel.messages.containsKey("Lucas"));
System.out.print("is Jack in testModel? ");
System.out.println(testModel.messages.containsKey("Jack"));
System.out.print("is Bob in testModel? ");
System.out.println(testModel.messages.containsKey("Bob"));
System.out.print("is message1 in testModel --> { Bob } ? ");
System.out.println(testModel.messages.get("Bob").containsKey(message1.getSent().toString()));
System.out.print("is message2 in testModel --> { Ben } ? ");
System.out.println(testModel.messages.get("Ben").containsKey(message1.getSent().toString()));
System.out.print("is message3 in testModel --> { Bob } ? ");
System.out.println(testModel.messages.get("Bob").containsKey(message1.getSent().toString()));
System.out.print("is message4 in testModel --> { Jack } ? ");
System.out.println(testModel.messages.get("Jack").containsKey(message1.getSent().toString()));
System.out.print("is message5 in testModel --> { Bob } ? ");
System.out.println(testModel.messages.get("Bob").containsKey(message1.getSent().toString()));
System.out.print("is message6 in testModel --> { Jack } ? ");
System.out.println(testModel.messages.get("Jack").containsKey(message1.getSent().toString()));
System.out.print("is message7 in testModel --> { Ben } ? ");
System.out.println(testModel.messages.get("Ben").containsKey(message1.getSent().toString()));
System.out.print("is message8 in testModel --> { Lucas } ? ");
System.out.println(testModel.messages.get("Lucas").containsKey(message1.getSent().toString()));
System.out.print("is message9 in testModel --> { Ben } ? ");
System.out.println(testModel.messages.get("Ben").containsKey(message1.getSent().toString()));
ArrayList<ChatMessage> messagesTest = testModel.getMessagesFor("Bob");
for(ChatMessage m : messagesTest){
System.out.println("Receiver: " + m.getTo());
System.out.println("Messsage: " + m.getMessage());
This is what I get on the console:
is Ben in testModel? true
is Lucas in testModel? true
is Jack in testModel? true
is Bob in testModel? true
is message1 in testModel --> { Bob } ? true
is message2 in testModel --> { Ben } ? true
is message3 in testModel --> { Bob } ? true
is message4 in testModel --> { Jack } ? true
is message5 in testModel --> { Bob } ? true
is message6 in testModel --> { Jack } ? true
is message7 in testModel --> { Ben } ? true
is message8 in testModel --> { Lucas } ? true
is message9 in testModel --> { Ben } ? true
Receiver: Bob
Messsage: nothing
I'm puzzled :( all the tests come true, but the ArrayList I'm getting from getMessagesFor() apparently has only one ChatMessage object for "Bob" when it should have 3. When I add breakpoints to the code on Eclipse and watch it stepping through the code, it seems "message" is getting all the entries correctly, hence the containsKey() tests all came true. But when I look the ArrayList returned by getMessagesFor() there is only one entry when there should be more. Another thing I noticed is that the message entry seems to always be the last one added to the treemap.
By the way, I apologize for the inelegant and noobish code I wrote. Please feel free to point out style tips and anything whatsoever you might be thinking of. I welcome you advice! :P
Anyway, Java gurus out there, please share some of your knowledge with me!
Thanks in advance!
-BenMaybe because every line in your test:
System.out.println(testModel.messages.get("Ben").containsKey(message1.getSent().toString()));references message1.getSent and doesn't reference any of the other messages 2 - 9.
Did you maybe cut & paste this line and forget to change the message number to retrieve?
Also, the way you posted your code means we can't copy your code to test it since each class should be in its own file and you took the main method out the class it belongs it. There are also references from one class to the private variables of the other class when the getter methods need to be used. -
I would appreciate any suggestions or ideas as to any additional features I could possibly implement in my program. This is part of my final year degree project.
The program is intended to be an OO Documentation Tool and its main function is to convert Java source code to UML Class diagrams.
The UML Class diagram will include Inheritance and Associations.
Other features that I have decided to implement are:
- Facility to generate custom HTML documentation ( tables listing the variables, methods (including parameter details, visibility etc) etc for each class). I have also managed to convert the java source code into HTML, with colored keywords etc.
- facility to view the source code of each java class in the main program, alongside the diagram.
- facility to save the uml class diagram as a GIF and JPEG image file.
That's just about it at the moment, I'm scratching my head trying to think of other possible ideas.
One idea I have thought about is possibly extending the system to cater for C++ classes but I think that might turn out to be a little over ambitious.
Please please give me some ideas, I need them.. :)
PS. Can someone suggest me a good name for this program?
I was thinking of calling it VisualJ or ModelJ but I notice there are already existing programs with this name.
The best nomination for the program name will get a star prize. :) 10 DD points.design pattern identification.. hmm, I'll have to read up on that.
jUMbLe , that sounds good..
Please keep the ideas coming, folks. :)
Much appreciated,
Regards,
Tony. -
Need some clarification in the following programs
Hi ABAPers
I am learning ABAP programming. I am having some doubts in some programs which are there in the book TEACH YOURSELF ABAP/4 in 21 Days.
I hope you will clear all my doubts
1) when I execute this program it is giving me error message and I am unable to resolve the error in it.
I dont remember the error message but it is something related to data conversion.
Listing 9.5 Variables Filled with Characters Other than Blanks or Zeros Using the WITH Addition of the CLEAR Statement
1 report ztx0905.
2 tables ztxlfa1.
3 data: f1(2) type c value 'AB',
4 f2(2) type c,
5 f3 type i value 12345,
6 begin of s1,
7 f1(3) type c value 'XYZ',
8 f2 type i value 123456,
9 end of s1.
10 write: / 'f1=''' no-gap, f1 no-gap, '''',
11 / 'f2=''' no-gap, f2 no-gap, '''',
12 / 'f3=''' no-gap, f3 no-gap, '''',
13 / 's1-f1=''' no-gap, s1-f1 no-gap, '''',
14 / 's1-f2=''' no-gap, s1-f2 no-gap, '''',
15 / 'ztxlfa1-lifnr=''' no-gap, ztxlfa1-lifnr no-gap, '''',
16 / 'ztxlfa1-land1=''' no-gap, ztxlfa1-land1 no-gap, '''',
17 /.
18 clear: f1 with 'X',
19 f2 with f1,
20 f3 with 3,
21 s1 with 'X',
22 ztxlfa1 with 0.
23 write: / 'f1=''' no-gap, f1 no-gap, '''',
24 / 'f2=''' no-gap, f2 no-gap, '''',
25 / 'f3=''' no-gap, f3 no-gap, '''',
26 / 's1-f1=''' no-gap, s1-f1 no-gap, '''',
27 / 's1-f2=''' no-gap, s1-f2 no-gap, '''',
28 / 'ztxlfa1-lifnr=''' no-gap, ztxlfa1-lifnr no-gap, '''',
29 / 'ztxlfa1-land1=''' no-gap, ztxlfa1-land1 no-gap, ''''.
according the book the output should be
The code in Listing 9.5 produces this output:
f1='AB'
f2=' '
f3=' 12,345 '
s1-f1='XYZ'
s1-f2=' 123,456 '
ztxlfa1-lifnr=' '
ztxlfa1-land1=' '
f1='XX'
f2='XX'
f3='50,529,027 '
s1-f1='XXX'
s1-f2='1482184792 '
ztxlfa1-lifnr='##########'
ztxlfa1-land1='###'
can you please explain me this program.
2) This program is giving me the following error message at line 7.
ALPHA AND IT-F1 ARE TYPE- INCOMPATIBLE.
The program is as follows.
Listing 12.9 Deleting Rows from an Internal Table Can also be Done Using the delete Statement
1 report ztx1209.
2 data: begin of it occurs 12,
3 f1,
4 end of it,
5 alpha(12) value 'ABCDEFGHIJKL'.
6
7 do 12 times varying it-f1 from alpha0 next alpha1.
8 append it.
9 enddo.
10
11 loop at it.
12 write: / sy-tabix, it-f1.
13 endloop.
14
15 delete it index 5.
16 skip.
17 loop at it.
18 write: / sy-tabix, it-f1.
19 endloop.
20
21 delete it from 6 to 8.
22 skip.
23 loop at it.
24 write: / sy-tabix, it-f1.
25 endloop.
26
27 delete it where f1 between 'B' and 'D'.
28 skip.
29 loop at it.
30 write: / sy-tabix, it-f1.
31 endloop.
32
33 loop at it where f1 between 'E' and 'J'.
34 delete it.
35 endloop.
36
37 skip.
38 loop at it.
39 write: / sy-tabix, it-f1.
40 endloop.
41
42 read table it with key f1 = 'K' binary search.
43 write: /, / 'sy-subrc=', sy-subrc, 'sy-tabix=', sy-tabix, / ''.
44 if sy-subrc = 0.
45 delete it index sy-tabix.
46 endif.
47
48 skip.
49 loop at it.
50 write: / sy-tabix, it-f1.
51 endloop.
52
53 free it.
And the out put according to the book is as follows
The code in Listing 12.9 produces this output:
1 A
2 B
3 C
4 D
5 E
6 F
7 G
8 H
9 I
10 J
11 K
12 L
1 A
2 B
3 C
4 D
5 F
6 G
7 H
8 I
9 J
10 K
11 L
1 A
2 B
3 C
4 D
5 F
6 J
7 K
8 L
1 A
2 F
3 J
4 K
5 L
1 A
2 K
3 L
sy-subrc= 0 sy-tabix= 2
1 A
2 L
How to rectify the error in this program.
3) In this program I want to ask is there any way that I can be able to see the write statement output which is there in the initialization event block. If yes then how .
(Note I dont want to remove the paramter (selection screen) statement.)
Listing 18.13 Explain the Sequence of Events That Occurs in this Program
report ztx1813 no standard page heading.
ztx1813 data: flag,
ctr type i.
parameters p1.
initialization.
flag = 'I'.
write: / 'in Initialization'.
start-of-selection.
flag = 'S'.
write: / 'in Start-Of-Selection',
/ 'p1 =', p1.
top-of-page.
add 1 to ctr.
write: / 'Top of page, flag =', flag, 'ctr =', ctr.
uline.
4) can anybody please mail me some exercise program queries ( right from the basic to complex one) on this mail id [email protected] or else u can give me the url of the website which contains such program.
EARGERLY WAITING FOR UR REPLIES
Regards,
maqsoodMaqsood,
I had tested all your programs and I am getting the correct output. I didnt get any error message and I didnt do any changes. I just copied your code and executed it.
To your Q3, I can say...INITIALIZATION is used only to assign values to variables. It is not used for output.
Only the start-of-selection and top-of-page will be printed. -
New to Mac and to video editing...need some guidance, please
I've decided to make the switch and ordered a new 3Ghz 24" iMac. I chose a 1TB HD and 4G of RAM.
I want to do some photo and video editing (nothing professional, simply vacation photos and video). I'll be purchasing an HD camcorder later this year to replace my current one (non-HD). I currently have about 5000 photos and about 50 hours of unedited DV on DV tapes to begin to work with.
Any suggestions on the following would be much appreciated:
1. Back-up: Should I use a 1GB Time Capsule or a 1 GB GTECH drive with Time Machine? I should mention that I plan on purchasing a MB or MBP later this year. Can I use a GTech HD as a NAS-like drive for both the iMac and the notebook?
2. Should I partition the internal HD?
3. Should I use a 'scratch disk' for video editing? If so, any suggestions for a particular size or model?
4. Any suggestions for ease of transfer of my data from my PC (photos, iTunes library, mail, IE favorites, etc.)?
5. Anything else you would suggest for a new Mac user?
Thanks very much for the help!!!Hi there.
First, a couple of websites to help you on your way (and Welcome to the Mac!)
http://www.apple.com/support/mac101/
And also
http://www.apple.com/support/leopard/
Now, as for your questions, these are just IMHO:
Backup - get BOTH the capsule and a separate HD. If you can only get one, personally I would get the non-TB disk so that I can drag the video files that I want onto it. the Capsule might backup other stuff (and slowly compared to the straight drive; get a FW 800 drive if you can, if not then FW 400 at least). I also think you meant TB not GB! Just make sure the DISK is from a good vendor (Seagate, Hitachi or Western Digital).
Partition - Nope; wastes space; you need contiguous space from my experience. Only do that if you really need to run Windows via Boot Camp (not recommended to run Windows at all!)
Scratch disk is absolutely recommended. Get the largest size one you can afford and separate out this from your backup disk. (Worst case, use a bit of the scratch disk as your backup, but also keep the same work files on your main hard disk so you at least have a physical duplicate somewhere). Yup, hard disks are gonna add up!
The above websites have some tips on transferring content from PCs; generally you can just burn stuff onto DVD and import them onto the Mac. That's pretty straight forward.
Suggestions IMHO - forget the Mighty Mouse and get another quality two button mouse. Also consider a Kensington Trackball. Get AppleCare warranty for all your hardware (for peace of mind). Triple check that your camcorder will be supported by iMovie '08. It might not be by Final Cut but at least you can get the files from iMovie into Final Cut. But Final Cut does support quite a lot of them already.
Introduce 10 other Windows people to the Mac. (This is what we do).
Cheers! -
I am the biggest "Newb" on this site, and I really need some help please..
Ok, the short of it.... I started training on Database programming about 2 weeks ago. I still don't really know a thing, or even understand the concepts. Now, my boss wants me to fix a bug in Oracle, and I haven't a clue. The ONLY help I've gotten was a link to this forum, and a speech about how I need to help myself. I told him I have the same chance of fixing anything, as monkeys typing hamlet. Anyone up for a challenge?
When I go to Application System, then Application Entry and enter the password a dialog box appears.... "FRM-40039: Cannot attatch library Empower while opening from APPUSRAPP."
That's what I have to fix. I have no clue. I don't even really know how to click around in this program. Please help, someone.
UPDATE: I've been told that everyone's pretty much going to be a jerk to me for asking this, and I'm currently searching old threads and can't find a way to delete this one I posted. So, you could just ignore the post, or jump in and be the internet tough-guy and tell me what I already know.... I'm a newb.
Edited by: user11033020 on Apr 14, 2009 11:41 AMAs this appears to be a Forms error (the error begins with FRM) you might get a better response by posting this in the Forms forum:
Forms
The Community Feedback forum isn't meant for product-related questions (as it says in the title).
Still, you should consider searching Metalink as well. If you've paid for support, you have every right to use it. -
Hi frnds, need some clarification on OBIEE.
How the details of the reports created in OBIEE gets saved? Database or FlatFile. I have created some reports in OBIEE but not able to find the structure of the report or data stored in table in the database. Kindly help in figuring out this. Thanks in advance. Have a nice day.
Details of the report get stored in the Web catalog and web catalog reside on the Weblogic Server.If you want to store report details like Logical Query,Creation Time,Creation Date....etc then you need to enable Usage Tracking,Where this information will store in the database,If you want to export you can do that into a flat file,
Do let me know if you need any support in enabling usage tracking.
Mark if helps,
Thanks,
Sasi Nagireddy
Maybe you are looking for
-
2009 Mac Pro 2.66 Xeon Quad Core or 2013 Mac Mini 2.66 Quad Core i7 ?
2009 Mac Pro 2.66 Xeon Quad Core or 2013 Mac Mini Server 2.66 Quad Core i7 ? I have a choice between these two for running Final Cut Pro X. Price is nearly the same. The Mac Pro has a ePCI 512 display adapter, 16 GB RAM, more hard drive expansion and
-
I bought the new LED display MacBook Pro yesterday and the screen flickers when it isn't on max brightness. Anyone else have this issue?
-
Can anyone gve me any advice on how to make a countdown timer in actionscript 3? I have tried several ways and have so far been unsucessful.
-
Using digital editions in my Nook. Can I change the reading to white print on black background?
In Digital Edition Reader, in a Nook, how can I change the page to nightime i.e. white print on black?
-
How can I turn off mousepad below keyboard?
How can I turn off the mousepad below the keyboard? This question was solved. View Solution.