Need some direction on downloading and converting

All, I need to download Solaris 10 in a windows environment and convert the disks to a installation set of disks for a sparc ultra 10. Can you point me to documentation or provide me with the set by set to accomplish this. I have been away from it since 2.6...

http://www.sun.com/software/solaris/get.jsp

Similar Messages

An easy way to download and convert YouTube videos to MP3 on Mac

An easy way to download and convert YouTube videos to MP3 on Mac
I’m always attracted by the wonderful YouTube video files, and can’t help myself extracting the amazing audios to save them as MP3 to playback on my iPod and other MP3 players. I guess some of you may want to do the same thing as I do, but have not found an available application to achieve this goal, if so, I would like to share my experience here, and sincerely hope you can get what you need from my post.
The software I’m in use is Pavtube YouTube Convereter for Mac, which has performed very well on all the work I let it do. It can finish downloading and converting YouTube videos simultaneously in a few clicks. Besides YouTube, it can also deal with the video files from many other video sharing websites, like MySpace, Yahoo! Video, Google Video, Metacafe, Reuters, etc. Okay, let’s go back to the point to see how to use it to download and convert YouTube videos to MP3 on Mac in detailed steps.
Step 1: Add YouTube URL
Step 2: Select MP3 as output format
Copy and paste YouTube URL to the textbox after “URL”, meanwhile, if you want to save the original FLV YouTube videos, you can tick “Save FLV File”. Click the drop-down icon at the end of “Convert To” to select MP3 as output format. Furthermore, if you want to save the output MP3 file in your specified file name, you can type it into the textbox after “Save As”, and also, you can click “Browse” button to decide where to locate the output MP3 files.
Step 3: Adjust audio parameters
Click “Custom” button, then the following interface will show up, on which you are able to adjust audio parameters like codec name, sample rate, bit rate and audio channels.
Step 4: Start downloading and converting simultaneously
As soon as all the above steps are finished, you can click the “OK” button in step 2, after that, downloading and converting YouTube videos to MP3 will start automatically. Once completed, you can click “Open” button in the interface as below to get the output MP3 files with ease.
[img]http://www.pavmac.com/pic/091201YouTubeconvertermac/youtube convertermac-conversion091201.jpg

Select all songs ctrl A, right click - Download.

If I copy & paste a url from fuzzyyellowballs website, videos cannot be downloaded and converted

I have been trying for some hours to solve the issue.
I have some urls and I am copying the urls and pasting them in anyvideoconverter, in order to download and convert them, so that I have the videos. However, it does not work and I thought that it would have to do with cookies.
The cookies have been enable for this site and I do not know what to do.
Can you please be of assistance ?

I should mention that editors which do not automatically "linkify" a URL usually do have a button on their toolbar to insert a link. Instead of pasting the link directly into the message, you can click in the text where you want the link, click the link button, paste in a little dialog, and then insert that.
(I have attached some old screen shots as examples of what I mean)

Download and convert Youtube video to MP3---Just with one click

Download and convert Youtube video to MP3---Just with one click
Last week, when wandering around the Youtube watch.com, I was enthralled with the theme song of "Lost", especially the words of the song "I found out, on the corner of first and amistad, where the west was all but won all weeklong, smoking his last cigarette, I said: "Where you been?" He said: "ask anything.""......"
I couldn’t help expecting to save this song to my personal players. What a delightful thing listening to the song while walking or waiting for a bus! Okay, do you have the same experience as me? When hearing an exciting speech or dialogue, are you thirsty for downloading them and saving as your best memory?
Download, convert Youtube to mp3?—yes, you can.
Anna, one of my best friends, has posed a question "I have a Mac notebook and I only need the audio (mp3 music) of a certain Youtube movie, what shall I do?" The solution to the problem is shown as below:
Step one: Install a Youtube Converter for Mac as follows:
Step two: import the URL of Youtube video (or batches of URL) you wanna convert using "Add URL" icon. Select output format like audio (MP3) by "Settings" and customize your output file path with "Browse".
Step three: If you want your output audio much better, you can set the audio resolution like Bit Rate, Channels or Sample Rate presented in the following picture.
Step four: Click "Ok” button, it automatically download and convert your youtube videos simultaneously. After a few minutes, you can get the desirable audio (mp3) you want and enjoy it on any portable devices.
Download, convert Youtube videos to iPod, iPhone, iPhone 3Gs, PSP, Creative Zen, Zune, iRiver, and etc. --- done by one click.
Generally, if you want to download a Youtube video and then convert them to MP3 for your mobile devices, you need two Youtube tools: Youtube Downloader and Youtube Converter. But, now, with Pavtube Youtube Converter for Mac, you can both download and convert massive videos by clicking one "Ok" button.
Now, all the best, you can enjoy versatile Youtube music at a waiting room, on a bus, traveling, walking around the park or lying on your bed..

Youtube's ToU specifically state that downloads of any content is prohibited unless there is a download button available for a particular video.

Need some help with downloading PDF's from the net.

need some help with downloading PDF's from the net. Each time I try to click on a link from a website, if it takes me to a new screen to view a pdf, it just comes up as a blank black screen? any suggestions?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

New to SAP, need some direction

Hi everyone, pretty much as the title states, I'm brand new to SAP and I need some direction as to what's the best way to start learning it.
To make my long story short, the company I work for was going to transition from a home-grown Sybase application to SAP Business One. 9 months and $150k later, they decide SAP sucks. Which upsets me because there's about 20 pages of SAP related stuff on all the job hunting sites and I'm always looking to "broaden my horizons" or something like that.
So now that no one using SAP... I want to start taking it apart and learning how it works. I just have no idea where to begin. I looked at the FAQs and all, but I don't think I'm even at that point yet.
So how can someone completely new to SAP get started?
Thanks in advance.
~Steve

Steve,
As an SAP customer, these are the resources I use on a daily to learn SAP Business One:
It looks like you've already found the SDN site:
SAP Business One SDK
https://www.sdn.sap.com/irj/sdn/developerareas/businessone?rid=/webcontent/uuid/6207e283-0a01-0010-6c84-bacd2745c33f">sap [original link is broken] [original link is broken]
<a href="https://websmp101.sap-ag.de/~form/sapnet?_SCENARIO=01100035870000000183&_SHORTKEY=01100035870000680298&_ADDINC=011000358700002837782005E&">Education</a> - More eLearning
<a href="https://websmp101.sap-ag.de/~form/sapnet?_SCENARIO=01100035870000000183&_SHORTKEY=01100035870000680297&_ADDINC=011000358700002837782005E&">Documentation</a> - I recommend the How-To guides
Here are two other SAP Business One forums (registration required):
<a href="https://www.sap.com/community/int/forums/ShowForum.epx?ForumID=202&kNtBzmUK9zU">SAP Business One Community</a>
<a href="http://www.asug.com/DiscussionForums/DiscussionForums/tabid/312/view/topics/forumid/244/Default.aspx">SAP Busines One</a>
Good luck,
Mike

I have a white screen on my ipod classic 80g need some help to try and resolve it . HELP PLEASE

I have a white screen on my ipod classic 80g need some help to try and resolve it . HELP PLEASE

iOS: Importing personal photos and videos from iOS devices to your computer
iOS: Unable to import photos or device not recognized as a camera

Need some direction on FW Redundancy and opening ports

I would appreciate any advice on the current ways of connecting 2 Firewalls directly for redundancy and also the best practice for allowing data through the firewall. Do firewalls have a stacking technology similar to StackWise or FlexStack? I need to allow specific ports through my network into another private network. Although this won't be connected to the internet the same type of security as if it were, is important. Sorry if this is a generic question but what methods would be best for allowing data to and from through my network firewall? I would grealty appreciate any sample configurations (I don't plan on configuring zones) or documentation on the current way of allowing these functions. Thanks for your help!

Hi,
There are 2 different options to my knowledge to have firewall redundancy with Cisco firewalls.
The most common one is Active/Standby Failover which you have 2 identical (hardware & software) Cisco firewalls connected by a Failover link. One of the the firewalls is the Active unit and handles traffic while the other unit is Standby monitoring the state of the Active device (and vice versa). When the Active unit fails the Standby unit will take the Active role.
Another option is Active/Active which basically means that you would be running multiple virtual Firewalls inside the actual hardware firewall. Some virtual firewalls would be Active on hardware unit 1 and some virtual firewalls would be Active unit would be Active on hardware unit 2. Hence the term Active/Active, both firewalls would be handling traffic.
ASA 9.0 Configuration Guide section on Failover
http://www.cisco.com/en/US/docs/security/asa/asa90/configuration/guide/ha_overview.html
The second and new option is Cluster setup where you essentially combine multiple identical firewalls together. This is a subject though that I have not gotten to test myself so my knowledge is very limited. Though to my understanding this is available only with high end ASA5585-X units so it might not be an option for most.
ASA 9.0 Configuration Guide section on Cluster
http://www.cisco.com/en/US/docs/security/asa/asa90/configuration/guide/ha_cluster.html
So most likely you will be using Active/Standby Failover with 2 identical Cisco firewalls.
Their configuration format compared to a standalone firewall doesnt differ much.
You will configure a "standby" IP address also on the ASA that will be the IP address that the Standby unit uses
You will configure the actual Failover interface
You will configure general Failover related settings
You can tune the Failover settings and define which interfaces are monitored (and can effect the Failover) and set some other additional parameters
So there is not that much to configure compared to the standalone Cisco firewall setup.
Your post seems to indicate that this firewall or firewall pair would be used for Internal network usage. I mean a firewall between 2 LAN/DMZ networks. This would in turn mean that unless you specifically need NAT between these network segments, you could actually leave the NAT configuration of the firewall completely blank and only configure the Routing&Firewalling related settings.
How you would configure access between the 2 different network segments would naturally depend on your own setup.
From what I understood from your above post it would seem to me that you should configure ACLs on both interfaces connected to their own network segments. These ACLs would be configured in Inbound direction (which would control traffic heading towards the firewall from that segment and into the other segment). You could then configure both ACLs in the manner that ONLY the required source/destination IP addresses/networks/ports are allowed and all other traffic is blocked.
I am not really sure what kind of example configuration we could give you as we dont really know what the whole setup is going to be.
Hope this helps
- Jouni

I need some help with AVI and IDX files please.

Hello there,
I've just been given a hard drive with a load of media on it that I need to work with in FCP.
There's a folder with many .AVI clips, and each clip has an accompanying directory file with the extension .IDX
The format of the AVI files is DV, 720x576, 48kHz.
For the life of me, I can't get FCP to accept the media. Log and Transfer won't accept them, and if i bring in the AVI files in on their own using File>Import>Files... I get a message saying:
Media Performance Warning
It is highly recommended that you either recapture the media or use the Media manager to create new copies of the files to improve their performance for multi-stream playback.
I can click 'OK' for this message and the media will appear in the browser, but If I place one of these AVI files on a new conformed sequence, the audio needs rendering. (Sequence settings correspond to media settings)
I tried just changing the wrapper from AVI to MOV, thinking I could fool FCP into accepting them, but I get the same rejection.
I thought the audio and video signals might be muxed, so I tried MPEG Streamclip to sort that out, but even MPEG Streamclip doesn't accept the media, saying : File open error: Can't find video or audio tracks.
Could anybody advise me on how to get the most out of these media files please?
Thanks in advance.
James.
Message was edited by: James M.
Message was edited by: James M.

yes. I tried transcoding in QT, but they still come in with the same audio rendering required. I'm a bit loath to convert them all though, as there are 1400 clips.
It's not a huge problem, as they do play in FCP, but I'd like to sort out the audio rendering. I don't understand why it needs rendering as the media and sequence audio settings match, and it's not some weird format or anything, it's bog standard 48kHz stereo.

Need some direction, Please.

I have an Oracle 10gR2 database and I would like to use something like "Discoverer" to allow my end users to interact with the data, however:
The last Discoverer product I worked with was 9i. It was client based. I would like this to be browser based. From what I read I should be looking as "Oracle Business Intelligence Discoverer Plus". This seem to have what I want but I have no idea what needs to be done to get it running. All the stuff I am reading leads me to believe that installing it may be a career in its self.
Any guidance would be great!

Hi Raman
Sorry everyone - the computer name must be in lowercase not uppercase as in my previous posting. Here is what Oracle said:
Some App Server components will not function properly with uppercase hostnames. I am seeing lowercase in some config files and uppercase in others. This is likely causing the unknown host error in the DCM command.
Ok, on Windows machines you will find the HOSTS file under c:\windows\system32\drivers\etc. It's a straightforward text file which can be edited by any suitable text editor: notepad, wordpad and so on.
A typical entry inside there looks like this:
192.168.2.13 myserver.learndiscoverer.com myserver
What you are doing is associating an IP address with a fully qualified domain name and a short name. You don't need to worry about upper or lowercase in this file because Windows doesn't care. There is no need to reboot the computer after making a change to the HOSTS file as it is dynamic and its changed will be picked up instantly upon saving. How about that for a configuration file?
However, Oracle does care about whether the name is in uppercase or not, at least for upgrading to 10.1.2.2 anyway. I had the dickens of a job upgrading one of my Windows machines because I had used all uppercase characters for the machine name. Of course, none of the Microsoft sotware cares one way or the other, so why this is important to Oracle - well honestly it has to be one of those unwanted, undocumented features that all software has from time to time (a bug to you and me). By the way, you don't put the name in lowercase in the HOSTS file. For Oracle's use you do this using Start | Settings | Control Panel | System | Computer Name | Change.
To answer the other question in this thread, this is the patch number for 10.1.2.2. 4960210
Another issue which was answered by Oracle contains the staging location for the install of the software. I placed by downloaded and unzipped installation routines onto my Desktop. Nope - cannot do that either. Here is what Oracle said:
C:\Documents and Settings\Michael\Desktop\10.1.2.2......etc.
There are known issues when the staging area has spaces in it..(Documents and Settings)
Stage the software again in a location where there are no spaces in the directory names.... file
Best wishes
Michael

Hi i just need some pl/sql materials and apps materials

Hi,
friends i am krish getting trained on orcale just need some materials to leanr quickly pl/sql
thnx for the sender
Thanks & Regards
krish

for R12,
http://download.oracle.com/docs/cd/B40089_08/current/html/docset.html
And for pl/sql
http://download-uk.oracle.com/docs/cd/A97630_01/appdev.920/a96624/toc.htm
Message was edited by:
Nitesh Jain

HT202796 I can not copy, modify, any file from my Mac to external hard disk, of the seagate brand (fast HDD Portable Drive) I don´t know if I need some software to copy and modify files in my hard disk external ? Could you help me please?

Hello I have a iMac with 3.4 GHZ intel core I7, memory 16 GB 1333 MHZ DDR3, and OS X 10.9.4 Software.
I have problems when I try to copy or modify any file from my MAC to MY PORTABLE DRIVE/DISQUE (external hard disk).
my external hard disk have the next features:
brand: Seagate
4TB
I do not know if I need some software such as: paragon or I need to configure my MAC,
Please help me..
Thanks a lot

Click on it, choose Get Info from the File menu, and check the format.
If it's formatted as NTFS, reformat it as MS-DOS, exFAT, or Mac OS Extended (Journaled) as desired, or install software such as Paragon NTFS on the computer.
If it's formatted as FAT32 or exFAT, use the Disk Utility's Repair Disk command on it; this may also happen for a flash drive which is about to fail.
If it's formatted as Mac OS Extended, click Authenticate and provide your administrator password, or change the permissions on that specific folder in its Get Info window.
(110769)

Need expert advice to import and convert video using Windows COM SDK

Hi,
Does anybody know can I import a video file and convert the footage to iPod compatible format using vbscript?
I found a COM function 'convertfile', but it seems only work with audio and doesn't work with mpg files. Does the current version of COM SDK 6.0.2.23 support conversion of mpg?
Set iTunesApp = WScript.CreateObject("iTunes.Application")
Status = iTunesApp.ConvertFile("m:\test.mpg")
Thanks in advance.
Intel Windows XP Pro

Thanks, but I know iTunes 6 (windows version) has a built-in function to convert a video to a format for iPod G5. That's why I wonder if the iTunes Windows COM SDK has the function call so that I can automatically import my scheduled recording to iPod. I think that's the advantage of iTunes / iPod. Actually I love my iPod G3 and iPod mini, but I don't see a reason for me to upgrade to G5 if it only accept H264 and mp4 because all my recordings (directly from my TV card) are only mpeg format and there is currently no command line tools to convert them for iPod. I know a bit of programming and it is much more conveninent to use scripts to do the mpg -> ipod conversion automatically than doing it manually using GUI programs..
Thanks

Need advice on video download and edit

I need to download and edit video, have not done it before. My Mac is a PowerBook G4 from 2005. The videocamera I have is a Sony GL2 digital which uses a mini DV cassette. I have a cable, a 4-pin DV to 6-pin firewire. What software do I need? (Currently I have only graphics apps, Adobe CS2, Dreamweaver, Flash, Quark.) The type of editing I need to do initially is cut out crap scenes, piece together good scenes, and export mpeg clips. I do not have a DVD writer on this Mac. I love Adobe products but I can't spring for Premiere right now.

iMovie came with the computer. Capture and cut away.
You'll need an external DVD burner if you want to output stuff. iDVD will allow you to burn the video to disk.
x

Need some examples for smartforms and scripts

hi
now i am working in scripts and smartforms. so i need some examples and some information for scripts and smartforms. where i can find that information.

hi jyothsna,
i have given below a simple example
this is the report program,
*& Report ZSCRIPT1 *
REPORT ZSCRIPT1 .
TABLES : EKKO,
 EKPO,
 KNA1,
 USR01,
 MARA,
 MAKT.
DATA : BEGIN OF ZOPTION.
 INCLUDE STRUCTURE ITCPO.
DATA : END OF ZOPTION.
PARAMETERS: P_EBELN LIKE EKKO-EBELN,
 P_EBELP LIKE EKPO-EBELP.
CLEAR EKPO.
SELECT SINGLE * FROM EKPO
 WHERE EBELN = P_EBELN AND
 EBELP = P_EBELP.
CLEAR KNA1.
SELECT SINGLE NAME1 FROM KNA1
 INTO KNA1-NAME1
 WHERE KUNNR = EKPO-KUNNR.
CLEAR MAKT.
SELECT SINGLE MAKTX FROM MAKT
 INTO MAKT-MAKTX
 WHERE MATNR = EKPO-MATNR AND
 SPRAS = SY-LANGU.
CLEAR USR01.
SELECT SINGLE * FROM USR01 WHERE BNAME = SY-UNAME.
ZOPTION-TDDEST = USR01-SPLD. "Output device (printer)
ZOPTION-TDIMMED = 'X'. "Print immediately
ZOPTION-TDDELETE = 'X'. "Delete after printing
ZOPTION-TDPROGRAM = 'ZPQRPRNT'. "Program Name
CALL FUNCTION 'OPEN_FORM'
 EXPORTING
 APPLICATION = 'TX'
 ARCHIVE_INDEX = ' '
 ARCHIVE_PARAMS = ' '
 DEVICE = 'PRINTER'
 DIALOG = ' '
 FORM = 'ZFORM1'
 LANGUAGE = SY-LANGU
 OPTIONS = ZOPTION
 IMPORTING
 LANGUAGE = SY-LANGU
 EXCEPTIONS
 OTHERS = 1.
CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 ELEMENT = 'HEADER'
 FUNCTION = 'SET'
 TYPE = 'BODY'
 WINDOW = 'HEADER'
 EXCEPTIONS
 ELEMENT = 1.
CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 ELEMENT = 'MAIN'
 FUNCTION = 'SET'
 TYPE = 'BODY'
 WINDOW = 'MAIN'
 EXCEPTIONS
 ELEMENT = 1.
CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 ELEMENT = 'FOOTER'
 FUNCTION = 'SET'
 TYPE = 'BODY'
 WINDOW = 'FOOTER'
 EXCEPTIONS
 ELEMENT = 1.
CALL FUNCTION 'CLOSE_FORM'
 EXCEPTIONS
 UNOPENED = 1
 OTHERS = 2.
This is the layout Set
Layout set Z_TESTSCRIPT
Description Test SAP script
Standard attributes
First page FIRST
Default paragraph P1
Tab-stop 1.00 CH
Page format DINA4
Orientation Landscape
Lines/inch 6.00
Characters/inch 10.00
Font attributes
Font family COURIER
Font size 12.0 Point
Bold No
Italic No
Underlined No
Characters Attributes
B Character String Bold
 Standard attributes
 Marker No
 Font attributes
 Bold Yes
Paragraphs Attributes
P1 Default Paragraph
 Standard attributes
 Line spacing 1.00 LN
 Left margin 1.00 CM
 Alignment Left-aligned
 Font attributes
 Font family TIMES
 Font size 12.0 Point
P2 Header Paragraph
 Standard attributes
 Line spacing 1.00 LN
 Left margin 4.50 CM
 Alignment Left-aligned
 Font attributes
 Font family TIMES
 Font size 18.0 Point
 Bold Yes
P3 Undelined paragraph
 Standard attributes
 Line spacing 1.00 LN
 Alignment Left-aligned
 Font attributes
 Font family TIMES
 Font size 12.0 Point
 Underlined Yes
Windows Attributes
MAIN Main window
 Window type MAIN
HEADER Main window
 Window type CONSTANT
FOOTER Main window
 Window type CONSTANT
Pages Attributes
FIRST First Page
 Standard attributes
 Next page FIRST
 Page counter
 Mode START
 Numbering type Arabic numerals
 Page window
 HEADER Left margin 00.00 CM
 Upper margin 00.00 CM
 Window width 20.00 CM
 Window height 04.00 CM
 MAIN Left margin 00.00 CM
 Upper margin 05.00 CM
 Window width 20.00 CM
 Window height 20.00 CM
 FOOTER Left margin 00.00 CM
 Upper margin 25.00 CM
 Window width 20.00 CM
 Window height 04.00 CM
Text elements for following windows:
HEADER
Element HEADER
/: POSITION XORIGIN 2 CM YORIGIN '-0.5 CM'
/: BOX XPOS 1 CM YPOS 1 CM WIDTH 18 CM HEIGHT 1 CM FRAME 10 TW INTENSITY 10
P2 ,,TEST PURCHASE ORDER</>
MAIN
Element MAIN
P1 Customer/Supplier:</>,,&KNA1-NAME1&
P1 PO No:</>,,&EKPO-EBELN&
P1 Part No:</>,,&MAKT-MATNR&
P1 Description:</>,,&MAKT-MAKTX&
P1 Quantity:,,</>&EKPO-MENGE&
P1 Sign:</>&uline(81)&
P1 Date:</>&EKKO-AEDAT&
FOOTER
Element FOOTER
/: POSITION XORIGIN 2 CM YORIGIN '-0.5 CM'
/: BOX XPOS 1 CM YPOS 1 CM WIDTH 18 CM HEIGHT 1 CM FRAME 10 TW INTENSITY 10
P2 ,,PLEASE SIGN THE PO BEFORE DISPATCH</>
reward if useful :)

Need some direction on downloading and converting

Similar Messages

Maybe you are looking for