Need some Document\Approach\Guidance on Slots and Targets in OWCS 11gR1

We have a requirement where Slots and Targets concept needs to be implemented by using Web Center Sites latest version 11gR1.
I am looking for some Document\Approach\Guidance for Webcenter Site 11gR1 version on this concepts and also guide me the difference between earlier and latest version on Slots and Targets Concepts.

In win32 programming I can call EnumWindows along with the hwnd of the window I want the sub windows for and it will enumerate through the hwnds of the sub windows. This is how we scrape windows screens.... pull the data from the controls in a windows window. Obviously EnumWindows does not work against java windows.
Is there a way to do this in on a Java GUI? If so, you'd be straight.

Similar Messages

  • Need some Document\Approach\Guidance on Webcenter Site and ATG Integration

    we have a requirement where pages/templates/content will be created in Webcenter Sites and will be consumed in ATG. I am looking for some Document\Approach\Guidance for Webcenter Site and ATG Integration

    I am looking for some Document\Approach\Guidance for Webcenter Site and ATG IntegrationBelow may help you:
    http://www.extended-content.com/wp-content/uploads/2012/07/WhitePaper-PublishingContentToATGFromOracleWebCenter-July2012.pdf
    http://www.extended-content.com/mediastore-now-integrates-with-webcenter-sites/
    http://technology.amis.nl/2011/08/13/fatwire-integrated-into-webcenter-as-webcenter-sites-for-web-experience-management/
    Hope this helps.
    -RMishra

  • Document\Approach\Guidance for ATG Integration with Webcenter Site

    we have a requirement where pages/templates/content will be created in Webcenter Sites and will be consumed in ATG. I am looking for some Document\Approach\Guidance for Webcenter Site and ATG Integration

    I am looking for some Document\Approach\Guidance for Webcenter Site and ATG IntegrationBelow may help you:
    http://www.extended-content.com/wp-content/uploads/2012/07/WhitePaper-PublishingContentToATGFromOracleWebCenter-July2012.pdf
    http://www.extended-content.com/mediastore-now-integrates-with-webcenter-sites/
    http://technology.amis.nl/2011/08/13/fatwire-integrated-into-webcenter-as-webcenter-sites-for-web-experience-management/
    Hope this helps.
    -RMishra

  • Park document approach for all PO and Non u2013 PO based vendor Invvoices

    Hello Experts,
    I want to use park document approach for all PO and Non u2013 PO based vendor Invoices.SAP
    Allows park document facility for FB60 ( Non-Po Based vendor Invoice)but doesnt allow the
    Same functionality for MIRO ( Logistics Invoice Verfication).Can anyone suggest a wayout for Park
    Document functionality for MIRO
    Thanks and Regards
    Urmila

    Hi,
    Transaction MIR7 can be used to park PO-based invoice. The same can be posted through MIRO.
    Regards,

  • I need some advice about the macbook pro and iPhone 5. I took a video on my iPhone and tried to email it it said it was too big to send? So i downloaded it to my macbook pro and tried to mail it to no avail? The macbook tells me the server won't let it th

    I need some advice about the macbook pro and iPhone 5.
    I took a video on my iPhone and tried to email it it said it was too big to send? So i downloaded it to my macbook pro and tried to mail it to no avail? The macbook tells me the server won't let it through other mail goes through any ideas how to resize it or what it might take to send it?

    I agree with LowLister, the best option for you to share the video online is to upload it to your online storage account for example : Box, Dropbox, SkyDrive (All of them provide free storage beginning from 2GB).
    You can upload the files which you want to share in this online storage and then they have sharing options in which you'll will get the link of the file to be sent and send the email. You're good to go!
    Tip : You can store multiple files for backup purposes.

  • TS2634 Please People I need some help.My iPod is disabled and when I connect it to iTunes it says: Itunes could not connect to the ipod because it is locked with a passcode...

    Please People I need some help.My iPod is disabled and when I connect it to iTunes it says: Itunes could not connect to the ipod because it is locked with a passcode...how can I do it?

    Place the iPod in Recovery mode and then restore.

  • I need some information about jre 1.5 and jre 1.6.

    Hello guys,
    I need some information about jre 1.5 and jre 1.6.
    Suppose if i have jre 1.5 customized with "additional language support" installed in my my desktop, and later on i install jre 1.6. will this jre over write all the esisting settings which was present in jre 1.5?
    In short will the version upgrades disable the features of the old Version even though the old version is present in the desktop?
    Thanks in advance for your answers.

    In <2j_j3.1889$[email protected]> =?iso-8859-1?B?VG9t4XMgU3XhcmV6?= writes:
    > Hi all, I am developing an acquisition data system for biomedical
    >signals and I need to transmit this data from my hardware to PC using the
    >USB port. For this, I am writing a device driver for Windows 98
    ^^^^^^ ^^^^^^ ^^^^^^^ ^^
    That's not a trivial step. I would write a small C/C++ program that
    exercises your driver (for robustness) just to be sure it's working
    right first without crashing your system.
    >The problem is that I don't know to use this driver in LabView.
    >For now, I think to use a "code interface node" with code writen in C or a
    >"call library function" with a DLL.
    That's correct. _After_ you got your C/C
    ++ test program (and USB
    driver) above working, then you can convert this little test program
    into a DLL or CIN, which can interface with LabView. A DLL might be
    easier (slightly) to write, but the CIN will work faster with LabView
    and can be designed to be reentrant. The Code Interface Reference
    Manual should guide you. Remember, this is a task for an _experienced_
    C programmer. You'll need to use handles to pointers into all your
    dynamic arrays and such passed into LabView.
    After you got your CIN or DLL written, you can use a special CIN
    function node to "link" (or bind) your CIN object into LabView's VI
    diagram.
    SOME THOUGHTS:
    There are many hardware devices already on the market today that come
    with Windows 98 drivers and DLL (or even CIN) libraries that would work
    immediately with LabView. Why don't you save yourself three months of
    work and simply buy one of these?
    /\ Mark M Mehl, alias Superticker (Supertickler to some)
    <><> Internet: [email protected]
    \/ Preferred
    UUCP: uunet!iastate.edu!mehl
    Disclaimer: You got to be kidding; who would want to claim anything I said?

  • I Need some Itractive Reports not using alvs and any other advanced

    I Need some Itractive Reports not using alvs and any other advanced topics like include and any other i need simple Intractive reports.

    Hello,
    Check this sample reports:
    Program name                   Report title
    DEMO_LIST_INTERACTIVE_1        Creating Detail Lists
    DEMO_LIST_INTERACTIVE_2        List Administration
    DEMO_LIST_INTERACTIVE_3        Page Headers in Detail Lists
    DEMO_LIST_INTERACTIVE_4        Messages in Lists
    If useful reward,
    Vasanth

  • Environment PATH is corrupted, need some expert RVM ruby version manager and environment PATH

    I have some serious issues with my ~/.bash_profile and I think I just figured out what it is.   I have a ~/.bash_profile for myself as a normal user and another one as root user.  They should be the same.  I am the administrator and the regular user and anything I do as root I should be able to do as a user in the least case it should work as root user.
    I really munged editing my path so I'm trying to reconstruct what I did and what I need it to do.  I would just like to get it back to where it was and add RVM and Sproutcore to my PATH.  That is all I need to do.  To explain it though I have to walk you through what I did wrong.
    1.  This is how my ~/.bash_profile is as a regular user .  I thought this should work with adding the two new programs to my path  RVM and Sproutcore.  So far not so good.
    export PATH=/usr/local/zend/bin:/usr/local/zend/mysql/bin:/users/jr/.rvm/bin:/usr/loca l/sproutcore:$PATH
    alias zf=/usr/local/ZendFrameworkCLi/bin/zf.sh
    2.  This is how my ~/.bash_profile is as the root user.  AS you can see I was going through the RVM install I guess a couple of times and it added something to my path.  This mostly looks right to me though.  I want my zend server to still work I probably added /usr/local/sproutcore to the end.  I don't know if that is right.  maybe I was supposed to do export $PATH and all that instead of just adding it to the end but that is what I did.
    sh-3.2# vi ~/.bash_profile
    PATH=$PATH:/usr/local/zend/bin:/usr/local/zend/mysql/bin:/usr/local/lib:/usr/loc al/sproutcore
    LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/zend/lib
    zf=/usr/local/ZendFrameworkCli/bin/zf.sh
    [[ -s "$HOME/.rvm/scripts/rvm" ]] && . "$HOME/.rvm/scripts/rvm" # LOAD RVM function
    [[ -S "$HOME/.rvm/scripts/rvm" ]] && . "$HOME/.rvm/scripts/rvm" # Load RVM function
    To make matters worse when you think it can't get worse.  I have another .bash_profile
    in
    /var/root/
    PATH=$PATH:/usr/local/zend/bin:/usr/local/zend/mysql/bin:/usr/local/lib:/usr/loc al/sproutcore
    LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/zend/lib
    zf=/usr/local/ZendFrameworkCli/bin/zf.sh
    [[ -s "$HOME/.rvm/scripts/rvm" ]] && . "$HOME/.rvm/scripts/rvm" # LOAD RVM function
    [[ -S "$HOME/.rvm/scripts/rvm" ]] && . "$HOME/.rvm/scripts/rvm" # Load RVM function
    ~     
    which looks strangely like the .bash_profile when I log in as root in my home directory.
    Also there is a .bashrc in the /var/root directory.  Here it is:
    export PATH=/usr/local/bin:/usr/localsbin:/usr/local/bin:/usr/local/sbin:~/bin:/usr/bi n:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin:/usr/local/ant/bin:/usr/local /zend/bin:/usr/local/zend/mysql/bin:/Users/jr/.rvm/src/ruby-1.9.3-p194:/usr/loca l/sproutcore
    ~               
    I even thought of going to the environment.plist and editing it in Xcode but I don't know what the key value pairs should be if it can be fixed otherwise then we can skip that step.
    This is what I need to work as well as adding the path to sproutcore but this is the error I get when running it and it is installed correctly.
    RVM is not a function, selecting rubies with 'rvm use ...' will not work.
    You need to change your terminal settings to allow shell login.
    Please visit https://rvm.io/workflow/screen/ for example and their manual says this, so I need the RVM to work with the shell this way below.
    Can someone help me get the shell down below working in conjunction with my .bash_profile ? 
    This is the manual page on that error message: 
    Using RVM inside GNU Screen
    RVM should work out of the box with screen as long as you have your profiles configured correctly. The easiest way to ensure it's working is to make screen use a login shell by placing the following in your ~/.screenrc file:
    shell -${SHELL}
    Sincere thanks to a very helpful community in the past, Janis
    This is on a Macbook Pro with OS 10.6   THanks again,

    Hi KenO,
    Try the mentioned steps:
    1. Open command prompt in elevated mode(Run as admin)
    2. Go to the .msi and run the command msiexec.exe /i "name of package.ms
    Let me know whether it worked.
    Regards,
    Romit Sinha

  • I need a document saying the serial number and imdi number was replaced with the new iPhone serial number and imel number, i need a document saying the serial number and imdi number was replaced with the new iPhone serial number and imel number

    Hi there.
    I live in Turkey and i purchesed
    IPHONE 5 S withh Serial number DNPLQ1S3FFFM this telephone had a water dammeg. so i ave replaced this phone with iphone 5s Serial F97M80SSFFFM.
    also
    IPHONE 5 with serial number DNPK51PTDTTR this telephne problem was shuts down randomly, replaced this phone with iphone 5 serial DQGL2030FH1F
    In Turkey i need a document for each replacment IPHONE showing the old IMEI number of the old telephone and the new IMEI number the new phone on the same document each replacement telephon.
    I NEED THIS DOCUMENT TO REGISTER THE NEW TELEPHONES WITHOUT PAYING ANY FEES AND NOT LOSSING MY RIGT OF REGISTERING.
    BEST REGARD.
    NEBIL YALCIN.

    Then contact whoever replaced the phone for you.
    No one here can help you & there is no one from Apple here either.

  • Need some help with a Macally enclosure and a spare internal drive

    Need some help with a Macally enclousure
    Posted: Oct 1, 2010 10:55 AM
    Reply Email
    Aloha:
    I have a Macally PHR-S100SUA enclousure that does not recognise,my WD 1001fals hard drive. It has worked just fine with other internal drives, but not this one?
    This is a spare internal drive that I am trying to make an external drive to store back ups for a lot of data. But so far I can not get it recognized by the computer. Maybe I need different drivers?
    Any suggestions?
    Dan Page

    Hi-
    Drivers aren't typically needed for external enclosures.
    Macally has none listed for that enclosure.
    The same is true for the WD drive, internal or external; no drivers.
    With the exception of high end PM multi drive enclosures, I can't think of any that use drivers.
    How is the external connected?
    Have you tried different cables, different ports?
    Bad/damaged cables are fairly common.
    Have you verified connections inside of the enclosure?

  • Just needed some clarification regarding the Viewer Builder and actually publishing your App...

    If someone could let me know if my understanding is correct, that'd be a huge help... So I've designed my publication in InDesign and exported the .zip file from the Folio Producer. I've created all of my certificates/splash screens/icons. Lastly, I just recently went through the steps of the Viewer Builder. I'm now at the stage of this process that requires me to purchase the $395 single edition so that I can enter the serial number in the last stage of the Viewer Builder. Now, to my knowledge, once I get the serial number, Viewer Builder will then give me access to an .ipa file and a .zip file. The .ipa file is for me to test on my iPad, and the .zip would be used to distribute to the App Store. I guess this is where I get confused... Let's say after I test the .ipa on my iPad, I don't like some part of my publication. I know how to update my own documents obviously, and I understand that I would have to export another .zip file from the Folio Producer, in turn requiring me to edit the exported folio link in the Viewer Builder. If I had to do that, would I need to purchase another single edition serial number since the original App was edited? Or would the same serial number apply since I'm editing that same App in the Viewer Builder? My next question is somewhat similar. Let's say all of the information is up to date and I go ahead and publish the App to the App Store. However, maybe a month later or some time in the future, I needed to update a phone number or email address--some little detail like that. Again, I understand that I'd have to update the export link in the Viewer Builder, but would I then need to create a new app since my app was already published? Would I then have to purchase another $395 single edition serial number just so that I can update my information? This seems to be the only thing in this whole process that I could use some clarification on so that I don't run into any surprises in the future. Any help would be great, thanks!

    Hi Joshua,
    When you have purchased the serial, you can rebuild your app with your updated content, as long as you use the same bundleID (applicationID), that is tied to your Apple mobile provisioning profile. The serial number is valid for a one year period.
    After you have submitted your app to Apple and it has been approved, please read: http://forums.adobe.com/message/4172167#4172167
    With kind regards,
    Klaasjan Tukker
    Adobe Systems

  • Need some HELP on older G3 slot loader, (ram)

    hi, i have got a imac slot loading G3 500MHz, currently only have 128 meg ram, want to go to 512, cant seem to find the right sort of ram to fit because of the tabs/notches that hold it in place are different,
    also do i need to run say 2x256, or can i just run one 512??
    so i need the serial/number ( i think it's pc100) although some of the tabs/locking notches are different.
    any info GREATLY appreciated
    many thanks
    imac G3 500MHz   Mac OS X (10.3.9)  
    imac G3 500MHz   Mac OS X (10.3.9)  

    "the thing i am having probs with is the positon of the notches that lock it in place"
    You need a PC100 or PC133 DIMM, not a SO-DIMM. It should be non-buffered and non-ECC. Push the locking tabs away from the ends, position the DIMM so that it physically matches up with the bottom of the slot (if it does not match up, simply turn it around length-wise so that it can fit down into the slot) [you may need to use a flashlight]. When you push it down into the slot, the locking tabs will click into the notches on both ends of the DIMM.
    I'm sorry to say that some PC100 DIMMs will fit but not work, and the same is true of PC133 DIMMs. Good luck finding what you need.

  • I need some legacy OS help. Resource and File Manager stuff...

    I don't know where to find a better place to ask this and I know that it will strain your memory, but I really am in need of help.
    I am working on a Windows port of the old and now defunct SpriteWorld animation library. I used to be involved in its development when I had a Mac several years ago, and I really enjoyed toying with it. I am aware of SpriteWorld X, but I don't like C++ and I want to do this for myself.
    Anyway, the coding of the actual project will be trivial. What I need help with are the dozens of resource files that contain all of the graphics used by the examples. Since I'm doing this in Windows, I cannot simply open the resource files in ResEdit or even in code very easily. What I'm trying to do is extract the PICT and cicn resources in the files. I did find the legacy documentation on Apple's developer site and I have studied it thoroughly. However, the Resource Manager documentation leaves out a great many details and is making it nearly impossible to parse the files.
    The biggest issue that I'm having is finding the exact starting point in the file for the resource fork. What I've noticed is that there seems to be an undocumented and nearly identical header, containing the file name, creator, file type and unknown data of unknown length, in all of the files that I've viewed. Since this header is not documented, it makes it very difficult to find the start of the fork. I'm guessing that it is used by the Finder?
    I was able to manually find the start(I think...), since a copy resource fork header is 30 bytes prior to the first resource type listed in the file. Per the documentation, this is merely a copy and the actual header is further up in the file. I've found that, but many times the offsets are wrong. All of the offsets start at the beginning of the resource fork, which unfortunately, does not start at the first byte in the file. To make it even more difficult, most of the time the real header (and thus the fork) starts 82 bytes in, but not always and there doesn't seem to be any reason for the discrepancy. Even when I'm sure of the location of the start of the fork, the offsets in the header often times will point to random data in the file instead of the correct locations. I don't know if the files are corrupted or if there is more information that I'm missing.
    Without being able to decipher the resource fork structure, there is no way that I can write the utility I need to extract the data. I know that I'm asking for help with VERY old data, but I'm not sure where else to turn. If I could afford it, I would just go out and buy a Mac. Unfortunately, that is not an option. I've searched just about as far as I can with Google, but to no avail. I wouldn't post this, but I've simply exhausted all other avenues. I sure hope someone can shed some light on this matter.
    Message was edited by: Mark_Speir

    If you get really stuck, you might find a helpful soul that might be willing to generate screen captures or otherwise de-rez the files for you. I've never gotten around to figuring out a way to dump the graphics directly from the resource forks, however, I do happen to have several legacy Macs still running on my home network, as well as some earlier OSX versions.
    Currently:
    Powerbook G4 (2), OSX 10.5.8, and 10.4.11
    iMac G4, OSX 10.3.9
    PowerMac 8600, OS 9.2
    PowerMac 8500 (2), OS 8.x, OSX 10.1 Server
    Mac IIci, OS 8.x or 7.x (have to check)
    Mac LC III, OS 7.x or 8.x (currently powerd off, but can be resurrected, used for terminal emulator
    (I've made use of these myself to get screen captures, and extract sound resources via ResEdit or Resorcerer for my own port of some legacy software).

  • Need some help regarding Client Proxy generation and test via SOAMANAGER

    Hello,
    we are integrating a 3rd party Java client via webservices.
    For that matter I generated a client proxy (consumer proxy) in se80 using the existing WSDL.
    This worked fine.
    The I wanted to create a logical port.
    Since this is only possible in SOAMANAGER I tried it there.
    Trying to do this automatically by the given WSDL file didn't work. The system dumps.
    So, I tried the manual approach by entering the server name and path in the 'Transport settings' tab.
    Now I wanted to test this.
    Unfortunately the test function in se80 (Proxy->Test) doesn't show a positive result.
    I always get an error
    SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response:
    ICM_HTTP_CONNECTION_FAILED")
    So, I am kind of stuck here.
    Do you guys have any idea what's wrong (approach, settings, bugs)?.
    I tested the webservices with a test application (soapUI), and they work fine.
    So it seems to be a problem in the proxy framework or a network problem?
    I really appreciate any kind of help.
    Thanks,
    Michael

    i created the port in soamanager.Do i need to create in lpconfig also?
    yes i have loaded the certificate in strust.
    i am getting the response also from the web service. as Security requirements are not satisfied because the security header is not present in the incoming message.
    i need to pass the user name and password while using the method.wsse security.wld u have any clue?

Maybe you are looking for