Need some good links for JAXB Customization

Hi all,
Please gimme some good links for JAXB customization tutorial.
cheers
JoyBoy

Similar Messages

Some good links for applications and games of all ...

hi
i recently applied a new 6280 and ive been wondering where i would obtain games and applications from. my mates have got some but they cant send them because you cant send things that automatically install in the phone. i heard theres an application that lets you send things that are installed into the phone eg. games, apps etc.
anyway, please write some links for GOOD nokia 6280 games and applications.
thanks very much.

There's quite a few websites which offer you applications and games for your phone, but the Terms and Conditions of this site prevent recommendation of any specific ones.
As a first stage you can go to the following website which will give you a sampler of the types of applications that are available for your phone :
http://www.softwaremarket.nokia.com/Message Edited by edwardquan on 09-Jun-200711:13 PM
Regards,
Edward

Need some Helpful Links for downloading documents

Hi Experts,
I would like to know if there are any links from where i can view and download the documents that will be helpful for me in gaining more knowledge on any particular topic in detail for SAP B1 2005B & 2007B.
I am looking for topics such as Creating Tax codes, VAT and CENVAT, Bank Reconciliations, Financial, Chart of Accounts, Inventory Management, Batch Management, etc.... with some examples or scenarios which are not covered in detail in the course materials.
Merry Christmas to all....
Thanks and Regards,
Kaushal

Hi Vijay,
Thanks for your response. But, when i visit the link, i get the following message:
Alias not available
Line: -
The alias SMB/EDUCATION that you have entered does either not exist,
or you are not authorized to access it.
Line: -
I have a s-user id but, i don't know if i can access the documents from the SAP portal. I hope that we should get the access by default by SAP.
Thanks and Regards,
Kaushal.

Please send me some good links on System Function Calls

Hi,
I want to know more about System Function calls. Please send me some good links on the same.
Eg : CALL 'C_DIR_READ_NEXT'
 ID 'TYPE' FIELD file-type
 ID 'NAME' FIELD file-name
 ID 'LEN' FIELD file-len
 ID 'OWNER' FIELD file-owner
 ID 'MTIME' FIELD file-mtime
 ID 'MODE' FIELD file-mode
 ID 'ERRNO' FIELD file-errno
 ID 'ERRMSG' FIELD file-errmsg.
Rgds,
Raghavendra.

Hi,
CALL - Call a System Function:
Note
This statement is for internal use only.
It cannot be used in application programs.
As of Release 6.20, you should use Kernel Methods instead of system functions.
Syntax
CALL cfunc.
Addition:
... ID id1 FIELD f1 ... ID idn FIELD fn
Effect
Calls the system function cfunc. The relevant function must exist in the file sapactab.h. If you change or recreate a function, you have to compile and link the SAP kernel again. For this, you need the C source code files.
Normally, external programs should be called by RFC with CALL FUNCTION ... DESTINATION.
Addition
... ID id1 FIELD f1 ... ID idn FIELD fn
Effect
Passes fields to the called program by reference. With "ID id1", you specify the name of a formal parameter, and with "FIELD f1" the relevant field from the ABAP/4 program. If a formal parameter expects an internal table, the latter is passed in the form "FIELD tab[]".
Example
DATA RESULT(8).
CALL 'MULTIPLY' ID 'P1' FIELD '9999'
 ID 'P2' FIELD '9999'
 ID 'RES' FIELD RESULT.
Note
With some critical C functions, the system automatically performs an authorization check. If the user does not have the appropriate authorization, a runtime error occurs. You can check the authorization with the function module AUTHORITY_CHECK_C_FUNCTION.
Exceptions
Non-Catchable Exceptions
Cause: You do not have the authorization to call this C function.
Runtime Error: CALL_C_FUNCTION_NO_AUTHORITY
Cause: The system function specified is unknown.
Runtime Error: CALL_C_FUNCTION_NOT_FOUND
Cause: The system function SYSTEM is deactivated (in CALL 'SYSTEM')
Runtime Error: CALL_SYSTEM_DISABLED
Regards,
Bhaskar

Hi all ,i need a good documentation for a beginner in WORK FLOW ?

hi all ,
i need a good documentation for a beginner in WORK FLOW ?
please,try to send the attached documents as much as u can apart from giving the weblinks ?
hope you will send it soon ....
thanks & regards
vishnuvardhan k.v.

Hi
Developing a simple application using steps "User Decision" and "Mail"
Basic terminology used in the workflow:
The workflow definition is the set of rules that determine the path that the process takes. For example, how a purchase requisition is processed, from the initial request to the creation of the purchase order
A Workflow Instance, which is often simply referred to as the workflow, is a single workflow run. For example, the processing of a single purchase requisition for computers.
The Tasks are the steps in the process, which have to be performed either by people or automatically by the software. For example, to check for the availability of the spare computers in the company.
A Work item is the task instance that is performed as a single workflow step. For example, check that there are no spare computers available in the company.
Agents are the people who process the tasks (via the work items). For example, requisitioner and a member of the purchasing department.
Container is the place where all the data used in the workflow is collected.
Binding is the set of rules that define which data is passed to which part of the process.
Building a simple workflow application
The central tool for creating, displaying and processing a workflow is the workflow builder (Transaction SWDD). Within the workflow builder you can create all components of a workflow, including all the containers you need for getting the data from one step to another.
Generally, most of the workflows are started by an event (for example, when a material is created or when a new purchase requisition arrives). You define which data from this event needs to be passed to the workflow via binding.
However you can also start any workflow directly. Let us create a simple workflow and start the workflow directly, using the testing tools.
Call transaction SWDD. When the workflow builder is called for the first time, a newly created initial workflow definition appears or else last created workflow appears. In such cases you can opt to create a new workflow by pressing Create New Workflow(ctrl + shft + F5). The following screen appears.
The initial workflow screen has the following parts:
a. The start of the workflow definition, indicated by .
b. The end of the workflow definition, indicated by .
c. The area in which you insert the new workflow definition is indicated by .
Now select the undefined step and select Create step or double click the undefined step. Now among the different steps chose the User Decision by double clicking on it.
Developing a simple application using steps "User Decision" and "Mail"
Previous
Now enter the title for the user decision Please make a decision. Also enter the decision texts as Approve and Reject. On pressing enter, the outcome values default to the Decision texts but you can specify your own names, if desired. Now we need to select the agent. Agent is the person to whom the work item needs to be sent.. Since this is just a beginning, we would hardcode the user name. Select the User from the drop down list and enter the user name to whom the work item needs to be sent. In general, this type of agent assignment is not done. Agents are generally assigned using the expression, agent assignment rule or organization object (job, position etc.).
Now select Transfer and to graphic button. Following screen appears:
Now we need to include a mail step to be sent to the requestor. Now select the line Approve and do a right click. Different options on shown on the context menu. Select Create.
Now select the step Send Mail from the list.
Developing a simple application using steps "User Decision" and "Mail"
...Previous
Now enter the subject and the body of the message for the mail to be sent.
Do not change the recipients. Our mail is intended for the persons who triggered this workflow. &_WF_INITIATOR& contains the value who executed the workflow. Since this is a test object, we are using &_WF_INITIATOR&. But we wouldnt be using this variable in real time scenarios. We would discuss about this in the coming documents.
Now select Transfer and to graphic button.
A popup appears requesting for the abbreviation and the name for this task. Enter the same and press enter.
Now enter the package as local object and press enter.
Follow the steps 5 through 9 for the step Reject. The following screen appears:
Press SAVE to save the workflow application. You need to enter an abbreviation and name for your workflow as shown below. You can change any of these at any later point. After saving, a number is assigned to your workflow starting with WS, as shown below.
Developing a simple application using steps "User Decision" and "Mail"
...Previous
To execute the workflow, activate it by choosing the activate button.
Test the workflow by choosing Test. The following screen appears.
Now choose Execute to start the workflow.
Now the recipient would receive a work item in his SAP® inbox (Transaction SBWP).
Now execute the work item by pressing Execute. The following screen appears:
Choose one among Approve or Reject as part of the user decision. He can select the third option to retain the work item in his inbox and make the decision later. Now suppose that the recipient has chosen one of the first options. Now a mail would be sent to the requestor with the status of his request.
Creating a Container element
This document details about creation of a container element in workflow and using it in the step "Mail".
Pre-requisites:
It is assumed that the reader of this Tutorial is aware of creating a workflow definition with the step Mail. If not, please go through the document on creating the same available, by clicking here.
Steps:
1. Create a workflow definition using the transaction SWDD.
2. Lets create a container element for Carrier id. Click on the Workflow Container on the left side of the screen (as shown in the screenshot below):
3. Now double-click on Double-Click to Create
4. Enter the details pertaining to CARRID here.
5. Click on tab Properties and select Import.
6. Click on Confirm (Enter).
7. Now the element created could be seen on the left side, below the Workflow Container.
Creating a Container element
Previous
1. Create a Mail step by double-clicking on Undefined step in the workflow.
2. Enter the recipient details in the Recipients box.
3. In the subject line, enter Carrid value entered is: and click on Insert Expression.
4. Select the element Carrid from the list.
5. Similarly enter the content in the Body area.
6. Save and activate the application.
Testing the Workflow application:
7. Test the workflow by clicking F8.
8. Enter the value of the Carrid as shown above and press execute.
9. A mail would be sent to the recipient mentioned earlier with the carrid value entered.
Condition Step
Agenda:
This document details about the steps Condition.
Pre-requisites: It is assumed that the reader of this document has a preliminary understanding of workflow and has worked with the container elements earlier. If not, please go through the first two Tutorials of workflow available in this site. (More details)
Procedure:
1. Create a new workflow definition.
2. Create a container element, CARRID (as demonstrated in tutorial 2).
3. Now click on undefined step and create the step Condition.
4. Enter the step name of your choice.
5. We would have the following condition here:
If carrid = AA.
Do this.
Else.
Do this.
Click on Click here to create a new condition. Following screen appears.
Double click on Carrid. Next click on = and enter the value AA in the constant field and press ENTER.
Enter the outcome names of your choice as shown above.
Click on Transfer and go to graphic.
As shown above, there are two branches here. One navigates to true, if CARRID = AA else the control takes the branch False.
Test the above scenario by inserting mail steps in the above 2 branches and by passing different CARRID values.
Condition Step
Agenda:
This document details about the steps Multiple Condition.
Pre-requisites: It is assumed that the reader of this document has a preliminary understanding of workflow and has worked with the container elements earlier. If not, please go through the first two Tutorials of workflow available in this site. (More details)
Procedure:
1. Create a new workflow definition.
2. Create a container element, CARRID (as demonstrated in tutorial 2).
3. Now click on undefined step and create the step Multiple Condition.
4. Enter the step name of your choice.
5. We would have the following condition here:
If carrid = AA.
Do this.
Elseif carrid = AH
DO this.
Elseif carrid = SQ
Do this.
Else.
Do this.
Select the CARRID using the F4 help for the comparison basis field.
Enter the values of the carrid under the Comparison values with the corresponding outcome name (of your choice)
Double click on Carrid. Next click on = and enter the value AA in the constant field and press ENTER.
Click on Transfer and go to graphic.
As observed above, there are different branches for each value of CARRID mentioned above.
Test the above scenario by inserting mail steps in all the branches and by passing different CARRID values.
Using "Container Operation" step
Agenda: Usage of step Container Operation.
Pre-requisites: It is assumed that the reader of this tutorial has worked in the concepts that are dealt in earlier tutorials. (click here for more details)
Scenario: In this tutorial, we would deal about how to work with the step Container Operation with an example of calculating the available seats by subtracting occupied seats from the maximum seats at the workflow level.
Procedure:
1. Create a new workflow definition using the transaction SWDD.
2. Create two container elements MaxSeats, Occ_Seats with the import property set. You can use the reference fields sflight-seatsmax, sflight-seatsocc for this.
3. Create another container element AvailableSeats without setting either import or export property as this is calculated within the workflow and used within the workflow. You might use any of the above reference fields as data types.
4. Define a new step Container Operation in the workflow definition by double-clicking on the Undefined step.
5. In this step, we would calculate the available seats from the max seats and seats occupied.
I would recommend entering all the container elements from the F4 help instead of typing them manually.
6. Return to the main screen.
7. Create a mail step after this to send the available seats information.
8. Test the above functionality by passing some values to the maximum and the seats occupied.
9. Result would be as follows:
Triggering Events Programmatically
Purpose: This document details the procedure in triggering the business object events programmatically.
Pre-requisites: It is assumed that the reader of this document is aware of the business object concepts and good in ABAP.
Procedure:
In this document, we would take an example of the business object BUS1001006 (Material) and the event CREATED. In general, this event is triggered whenever a material is created using a standard procedure like MM01 or any others. Now we would trigger this event from our own programs.
Following are the screenshots of the business object BUS1001006 and the event CREATED. Go to transaction SWO1 for more information of the business object.
Double-clicking on the key field parameter gives you technical information of the field.
In order to trigger an event programmatically, we would use the function module SWE_EVENT_CREATE.
Following is the sample code to trigger the events programmatically:
REPORT ZDEMO_TRIGGER_EVENT.
DATA: KEY LIKE SWEINSTCOU-OBJKEY.
KEY = '1163'. Material Number (hard-coded)
CALL FUNCTION 'SWE_EVENT_CREATE'
EXPORTING
objtype = 'BUS1001006'
objkey = KEY
event = 'CREATED'
CREATOR = ' '
TAKE_WORKITEM_REQUESTER = ' '
START_WITH_DELAY = ' '
START_RECFB_SYNCHRON = ' '
NO_COMMIT_FOR_QUEUE = ' '
DEBUG_FLAG = ' '
NO_LOGGING = ' '
IDENT =
IMPORTING
EVENT_ID =
TABLES
EVENT_CONTAINER =
EXCEPTIONS
OBJTYPE_NOT_FOUND = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
WRITE 'Event Triggered'.
ENDIF.
COMMIT WORK.
In order to test whether the event is getting triggered or not, we can make use of Event Trace. Switch on the event trace using the transaction SWELS.
Press Switch On.
Now execute the program developed earlier. Now switch-off the event trace using the same transaction SWELS.
Now go to transaction SWEL. Here you can list out the events triggered in the particular period of time. Here is the event-trace list:
Deadline Monitoring in SAP Workflow
A major advantage of workflow is the ability to monitor the workflow steps according to a predefined schedule. Following are different deadlines that can be monitored against each workflow step:
Requested Start
Latest Start
Requested End
Latest End
In this example, we will define a deadline to the User Decision example created earlier (click here). Following is the screenshot of the application developed using the User Decision example:
We would extend this example to the deadline monitoring.
In the User Decision step, click on the latest end tab.
By default, No deadline monitoring is active (as seen in the above screenshot).
Choose the Work Item Creation from the list box.
After selecting Work Item Creation, chose an offset of 5 minutes. This means that the work item must be executed within 5 minutes of the creation, if not this would trigger.
Deadline Monitoring in SAP Workflow
Enter recipient details to whom the message to be escalated, if the work item is not executed with in 5 minutes after work item creation.
Save and activate the workflow definition.
Testing the workflow application:
Execute your workflow.
Check for the work item in the SAP Inbox. This time do NOT execute the work item.
Wait for the deadline to be triggered. After that, a deadline message is delivered to the recipient mentioned in the Latest End tab. See the screenshot below.
Dont worry if the deadline message doesnt appear immediately after 5 minutes. This depends on various factors including how the deadline monitoring program is scheduled and also on the availability of the background processors.
Use SWWA to check how the deadline monitoring program is scheduled in program.
For example, assume that our work item has been created at 09:10 hrs and the deadline message is expected to trigger at 09:15 hrs. From the above screenshot, it is understood that the background program is scheduled to execute for every 3 minutes. Assume that the last run of the program is at 09:14hrs and the next run is expected at 09:17hrs. So even our deadline expires at 09:15, the deadline message would appear only at 09:17hrs after execution of the background program.
Some more points
In our above example, we have used the deadline on the Work Item creation time. i.e., 5 minutes after creation time, the deadline message would be sent. Now we would check the other option Expression. Here we can mention the date and time, when the deadline message should appear irrespective of the work item creation date/time.
As seen in the above screenshot, we can provide the target date and time by which the task should be finished. Container elements could be used in this case. Please refer to our example on creation of container elements (click here).
Personal Substitute in Workflow
Requirement: Need to have at least one substitute who can act upon work items in your absence.
Important: The appointed substitute would be able to see all your work items. A substitute cannot be assigned for only particular area of organization or any other item. So need to ensure that the substitute have the necessary authorizations to act upon the work items.
Procedure:
1. Go to SAP Business Work Place (TCode: SBWP)
2. Now from the menu bar, select Settings à Workflow settings à Maintain Substitute
3. Highlight/Select the name on the window, in this case SAPDEV02 and click on Create Substitute.
4. List of users available in the system are displayed.
5. Select the required substitute user name. Following screen appears.
Validity field describes about the period in which the setting would be active. Note that the dates on the screen would range from the current date to 31st Dec 9999.
Regarding the checkbox Substitution active, it is advised to leave this checkbox unchecked for system performance reasons. A check in this box indicates that the substitution is permanent and if left unchecked it is treated as as-needed. A permanent substitute will automatically receive the primary users work items in their own box. In the case of as-needed, substitute must manually adopt the work items from the primary users inbox.
6. Save the entries
7. Click Enter to leave the screen.
Adopting a Substitute in Workflow
If you have been designated as an as-needed substitute, you must manually adopt the substitution. If you are designated as a permanent substitute, the work items would automatically appear in the inbox.
Before adopting a substitution, there are 19 work items in the inbox. See the screenshot below:
To adopt a substitution, select Settings à Workflow settings à adopt substitution.
Select the corresponding User-id (if you have been assigned as a substitute for multiple people, then this option would allow you to select the user name of whom you would to check the work items)
The corresponding users work items would appear in our inbox now.
You can end the substitution, by selecting settings à Workflow settings à End substitution.
Note: Substitutes can only adopt work items that are directly routed to the person for whom they are a substitute. If you are a substitute for a user (SAPDEV02) who has been made a substitute for another user (SAPDEV01), you will only see work items for user SAPDEV02 and not of the user SAPDEV01.
Notification of Work Items via e-Mail
SAP provides us with a facility of notifying the user via the email address of your choice when there are any pending work items in the SAP Inbox..
1. Go to Transaction SO13.
2. Click on Automatic Forwarding tab.
3. Click on Create icon .
4. Enter the details in the above screen.
5. Click ENTER to complete the entries.
6. Now the notification would be received at the provided email address if there are any pending work items in the inbox.
Filtering the Work Items in the SAP Inbox using BADI
This document details about the procedure in filtering some of the work items from the SAP inbox using a BADi.
Following is the screenshot of the SAP inbox, before implementing BADi:
The BADi that is used in filtering the work items is WF_BWP_SELECT_FILTER. To implement the BADi, go to transaction SE18. From the menu, select Implementation à Create. (See the screenshot below)
Enter the implementation name and press ENTER
Enter any meaningful short text for the implementation and click on the tab Interface
The implementing class, ZCL_IM_BWP_SELECT_FILTER, is automatically proposed. Double click on the implementing class name.
You are now navigated to the class builder. Now double-click on the method name shown on the screen (see the snapshot below)
Now let us filter out the work items belonging to the task TS2000066. See the code below:
Activate the method and also the implementation. In the state of active, you wouldnt be able to make any changes. To make any changes, we need to deactivate it and then make the changes.
Now check the inbox and would notice that the work items related to that task are no more appearing.
To notice the differences, try activating and deactivating the BADi implementation.
Workflow tutorials with step-by-step and with screenshots are available at http://www.****************/Tutorials/Workflow/Workflow.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/42/c14a9b55103116e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
http://www.sapgenie.com/workflow/
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2857887
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2855919
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2735228
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
debug a workflow.
This has a step by step procedure :
http://fuller.mit.edu/workflow/debugging.pdf
www.erpgenie.com/sap/workflow/debugging.htm
http://www.erpgenie.com/workflow/debugging.htm?2b5de440

Post some good examples for logical database

Hi all,
Can any one post some good examples for logical database.
Regards,
Lisa

Hi lisa
Example of a Logical Database
Let us consider the logical database TEST_LDB.
Selections in the Selection Include
 SELECT-OPTIONS: SLIFNR FOR LFA1-LIFNR,
 SBUKRS FOR LFB1-BUKRS,
 SGJAHR FOR LFC1-GJAHR,
 SBELNR FOR BKPF-BELNR.
Database Program
DATABASE PROGRAM OF THE LOGICAL DATABASE TEST_LDB
PROGRAM SAPDBTEST_LDB DEFINING DATABASE TEST_LDB.
TABLES: LFA1,
 LFB1,
 LFC1,
 BKPF.
Initialize selection screen (process before PBO)
FORM INIT.
ENDFORM. "INIT
PBO of selection screen (always before selection
screen
FORM PBO.
ENDFORM. "PBO
PAI of selection screen (process always after ENTER)
FORM PAI USING FNAME MARK.
CASE FNAME.
 WHEN 'SLIFNR'.
 WHEN 'SBUKRS'.
 WHEN 'SGJAHR'.
 WHEN 'SBELNR'.
ENDCASE.
ENDFORM. "PAI
Call event GET LFA1
FORM PUT_LFA1.
SELECT * FROM LFA1
WHERE LIFNR IN SLIFNR.
 PUT LFA1.
ENDSELECT.
ENDFORM. "PUT_LFA1
Call event GET LFB1
FORM PUT_LFB1.
SELECT * FROM LFB1
WHERE LIFNR = LFA1-LIFNR
AND BUKRS IN SBULRS.
 PUT LFB1.
ENDSELECT.
ENDFORM. "PUT_LFB1
Call event GET LFC1
FORM PUT_LFC1.
SELECT * FROM LFC1
WHERE LIFNR = LFA1-LIFNR
AND BUKRS = LFB1-BUKRS
AND GJAHR IN SGJAHR.
 PUT LFC1.
ENDSELECT.
ENDFORM. "PUT_LFC1
Call event GET BKPF
FORM PUT_BKPF.
SELECT * FROM BKPF
WHERE BUKRS = LFB1-BUKRS
AND BELNR IN SBELNR
AND GJAHR IN SGJAHR.
 PUT BKPF.
ENDSELECT.
ENDFORM. "PUT_BKPF
The PROGRAM statement has the addition DEFINING DATABASE TEST_LDB. This defines the database program as belonging to the logical database TEST_LDB.
The nodes of the structure are declared with the TABLES statement which generates the appropriate table work areas. You can also use the NODES statement to define database tables as nodes. If a node of a logical database is not a database table, you must use the NODES statement. The interface work areas are shared by the database program and the user, and so act as an interface for passing data. The term "user" here can mean either an executable program to which the logical database is linked, or the function module LDB_PROCESS.
The subroutines INIT and PBO initialize the selection screen.
In the PAI subroutine, you can include an authorization check for the user input on the selection screen. Plausibility or value range checks are also possible. If a check fails, you can write an error dialog. The corresponding field on the selection screen is then made ready for input again.
The PUT_<node> subroutines read the database tables according to the selection criteria entered by the user and trigger the relevant events in the executable program. This program is intended only to show the essential structure of a logical database. It does not contain any refinements to improve response times. The order in which the subroutines are called is determined by the structure of the logical database.
regards,
vijay

Want some good links on BAPI and IDOC's.......

Hi,
Can I get some good links and some good material in BAPI and IDOC's.
Thanks in advance.
Message was edited by: Deepak333 k

hi
http://cma.zdnet.com/book/abap/ch03/ch03.htm
http://help.sap.com/saphelp_40b/helpdata/en/4f/991f82446d11d189700000e8322d00/applet.htm SAP Online Help For Dictionary.
http://sappoint.com/abap/
for SAPscripts
For follg., refer http://www.henrikfrank.dk/abapuk.html
Please note that I do not offer any support for the examples !
ABAP objects and control technology
IDOC
SapScript
Performance tuning
BAPI Programming
Visual Basic Integration - Using the DCOM Connector and BAPI OCX (Only available in Danish)
JAVA and the SAP java connector
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
for keywords
very useful link for all
http://www.sapgenie.com/abap/index.htm
http://www.sap-img.com/abap.htm
http://www.sapdevelopment.co.uk/tips/tipshome.htm
http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
http://sap.ittoolbox.com/nav/t.asp?t=322&p=322&h1=322
http://sap.ittoolbox.com/nav/t.asp?t=448&p=448&h1=448
http://www.thespot4sap.com/
http://www.kabai.com/abaps/q.htm
http://www.geocities.com/mpioud/Abap_programs.html
http://www.sapgenie.com/abap/tips_and_tricks.htm
http://www.sapassist.com/code/d.asp?whichpage=1&pagesize=10&i=10&a=c&o=&t=&q=&qt=
For FAQ
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.sapgenie.com/faq/abap.htm
BAPI-step by step
http://www.sapgenie.com/abap/bapi/example.htm
Weblog for receive email and processing it through ABAP
/people/thomas.jung3/blog/2004/09/09/receiving-e-mail-and-processing-it-with-abap--version-610-and-higher
For Logical database
http://help.sap.com/saphelp_46c/helpdata/en/9f/db9bed35c111d1829f0000e829fbfe/frameset.htm
very useful
http://help.sap.com/saphelp_46c/helpdata/EN/35/2cd77bd7705394e10000009b387c12/frameset.htm
Useful link to websites
http://www.hernangn.com.ar/sap.htm
Useful for background
http://www.sappoint.com/basis/bckprsng.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/6f/08703713bf277ee10000009b38f8cf/frameset.htm
http://publib.boulder.ibm.com/infocenter/wbihelp/index.jsp?topic=/com.ibm.wbix_adapters.doc/doc/mysap4/sap4x41.htm
Table control in BDC
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
For posting weblog,
/people/sap.user72/blog/2005/06/28/sdn-weblogs-making-it-easier
Dynamic Internal table -weblog in sdn
/people/subramanian.venkateswaran2/blog/2004/11/19/dynamic-internal-table
Smartforms
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
ALV
http://www.geocities.com/mpioud/Abap_programs.html
Mail
http://www.geocities.com/mpioud/Z_EMAIL_ABAP_REPORT.html
http://www.thespot4sap.com/Articles/SAP_Mail_SO_Object_Send.asp
http://www.sapdevelopment.co.uk/reporting/email/attach_xls.htm
Sending mail in background or spool mail
http://www.sap-basis-abap.com/sapac018.htm
BOM Explosion
/people/prakash.singh4/blog/2005/05/15/explode-boms-in-enterprise-portal-using-htmlb-tree--part-1-abap
BOM
http://help.sap.com/saphelp_erp2005/helpdata/en/ea/e9b7234c7211d189520000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/2e4114a61711d2b423006094b9d648/frameset.htm
http://www.sap-img.com/sap-sd/sales-bom-implementation.htm
http://www.sap-basis-abap.com/sappp007.htm
OLE
http://www.sapgenie.com/abap/ole.htm
http://help.sap.com/saphelp_46c/helpdata/en/59/ae3f2e488f11d189490000e829fbbd/frameset.htm
ALVGRID with refresh
http://www.geocities.com/mpioud/Z_DEMO_ALV_REFRESH_BUTTON.html
For language setting and decimal separator
/people/horst.keller/blog/2004/11/16/abap-geek-7-150-babylonian-confusion
Oracle queries
http://sqlzoo.net/
To format SQL
http://www.sqlinform.com/
SCOT settings
http://www.sap-img.com/basis/basis-faq.htm
Status Icon [ALV,Table Control,Tab Strip]
http://www.sapdesignguild.org/resources/MiniSG-old/from_develop/norm_status_icons.htm#positioning_4
ALV Group Heading
http://www.sap-img.com/fu037.htm
For multiMedia
/people/thomas.jung3/blog/2005/05/11/using-classic-activex-controls-in-the-abap-control-framework
Uploading LOGO in SAP
http://www.sap-img.com/ts001.htm
LSMW
http://www.sap-img.com/sap-data-migration.htm
http://www.sapgenie.com/saptech/lsmw.htm
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
http://www.sap.info/public/INT/int/glossary/int/glossaryletter/Word-17643ed1d6d658821_glossary/L#Word-17643ed1d6d658821_glossary
OOPS ALV
OOPS - Events.
Editable ALV
Tree
TabStrip
Multigrid
Check this for basic concepts of OOPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap code samples/abap objects/abap code sample to learn basic concept of object-oriented programming.doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap code samples/alv grid/abap code sample to display data in alv grid using object oriented programming.doc
Tabstrip
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap code samples/alv grid/abap code sample for tab strip in alv.pdf
Editable ALV
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap code samples/alv grid/abap code sample to edit alv grid.doc
Tree
http://www.sapdevelopment.co.uk/reporting/alv/alvtree/alvtree_usrint.htm
General Tutorial for OOPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/an easy reference for alv grid control.pdf
Function Module
http://www.geocities.com/victorav15/sapr3/abapfun.html
Smartforms
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
Table Control
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/table control in abap.pdf
regards
Arun

Hi, i was wounding if anyone would help me get information on the company regarding the acquisition of, beats by dre, could someone please help me out as i am doing a college report on this and need some good sources of information

hi, i was wounding if anyone would help me get information on the company regarding the acquisition of, beats by dre, could someone please help me out as i am doing a college report on this and need some good sources of information

Try a search with Google.
Why should we do your homework for you?

How to get some good docs for general troubleshooting issues of WLS 8.1?

Hi,
In my company we just have started WLS, m working as WLS admin.
How can i get some good docs for general issues as I m facing a lot problem in this early stage.
If ther is any link, or community which can help me?
I have tried on google n got some basic info.
I think ther r some useful info is available on the site " http://eudownload.bea.com/" but m not able to open it.....is this url is changed?

Troubleshoot Cluster :-
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/cluster/trouble.html
Troubleshoot JMS :-
http://download-llnw.oracle.com/docs/cd/E13222_01/wls/docs92/jms_admin/troubleshoot.html
Troubleshoot SAF :-
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/saf_admin/troubleshoot.html
Troubleshoot JDBC:-
http://download-llnw.oracle.com/docs/cd/E13222_01/wls/docs81/jdbc/troubleshooting.html
Troubleshoot JTA:-
http://download.oracle.com/docs/cd/E11035_01/wls100/jta/trbtrx.html
Its more or less same for all versions. You can refer to specific version docs. Hope this helps.

Any Good link for mysql Installation in solaris 10?

Please share with me good link for mysql, Tomcat installation(latest version)
I found http://instmysql5sol10.blogspot.com/ in internet but not able to download "Download the packages (both Standard and Max) and save them in an appropriate directory".

alan.pae wrote:
attempted to install Solaris on it. Everything goes OK but I am confused by an info message that I get upon booting the system from CD:
SunOS Release 5.10 Version Generic_137138-09 *32-bit* You got it installed and then you booted from the CD???
If you booted from the hard disk then run:
isainfo -kv
alanNo, of course not. It isn't installed yet. I meant that I booted the
computer from from the install DVD to start the installation process.
But thanks for the info. I'll install it and will run this command.

Need some sample documents for DME development

Hi,
I need some sample documents for DME development. I expect any information covering developing DME formats and steps for downloading a DME file (this I need for checking my formats).
please, send any relevant info you have to mail id mindaugas.kazlauskas at gmail.com
Many thanks and reward points ahead!
Regards,
Mindaugas

Hi,
the main thing is that I need format with payment information structured in single column, like this:
//separator//
value1
value2
value3
//separator//
value1
value2
value3
//separator//
maybe there is any SAP format structured like this?
Regards,
Mindaugas

Can someone suggest some good books for sql reporting services (SSRS) 2012 or above?

Hi Everyone,
Can someone suggest some good books for sql reporting services (SSRS) 2012 and above? I ave been working on ssrs for past 2 months and have a basic understanding of ssrs.
Regards
Regards

Hi,
you can look for below options;
http://www.amazon.in/Microsoft-Server-Reporting-Services-Recipes/dp/0470563117#reader_0470563117
http://www.goodreads.com/book/show/18147604-learning-sql-server-reporting-services-2012
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem. http://techequation.com

Can somebody help me in getting some good material for Regular Expressions and IP Community list

can somebody help me in getting some good material for Regular Expressions and IP Community list

I'm not sure what you mean by "IP Community list", but here are 3 reference sites for Regular Expressions:
Regular Expression Tutorial - Learn How to Use Regular Expressions
http://www.regular-expressions.info/tutorial.html
Regular Expressions Cheat Sheet by DaveChild
http://www.cheatography.com/davechild/cheat-sheets/regular-expressions/
Regular Expressions Quick Reference
http://www.autohotkey.com/docs/misc/RegEx-QuickRef.htm

Does anyone have a good link for images I can access for my web development work. I have Adobe Creative SUite 5.5

Does anyone have a good link for images I can access for my web development work. I have Adobe Creative Suite 5.5

In short, NO.
I was hoping that the 7.4.1 update would allow it to work, but it has caused more problems than it is worth.If you do actually get it to work you will see the TC in finder (under Shared) when connected to the internet outside of your home network. What I have found though is that the 7.4.1 firmware update has made using the internet at home almost impossible.
I have tried Hamachi but it is not reliable.
I have settled with Dropbox so my files are synced between my home machine and laptop.

Need a direct link for iptables 1.3.5-1.pkg.tar.gz

i need a direct link for iptables 1.3.5-1.pkg.tar.gz so i can download it to a machine with no internet connection, and use pacman to install.
this is also a newbie question, whats the differences between:
iptables 1.3.5-1.pkg.tar.gz
and
iptables-1.3.5.tar.bz2
cheers!!

ftp://ftp.archlinux.org/current/os/i686 … pkg.tar.gz
difference between .pkg.tar.gz and .tar.bz2 is that the .tar.bz2 is a source package (you'll need to build it), and .pkg.tar.gz is a binary package to be used with arch

Need some good links for JAXB Customization

Similar Messages

Maybe you are looking for