Need Some Help Big Time please

Right one day when i was leaving my house turned the computer off as you do.
came back in turned it on and when it comes to the white apple logo to load all of a sudden a black screen appears with all this text.saying something about there being no debug information and the very last line it says is
panic:we are hanging here...
it completely disables my keyboard and mouse any suggestions to what is wrong?
thanks
Perry

[Apple docs: What's a "kernel panic"? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=106227]
[Topic : kmosx: Kernel Panics ? Don't panic too !|http://discussions.apple.com/thread.jspa?threadID=121923]
[X-Lab: Resolving Kernel Panics|http://www.thexlab.com/faqs/kernelpanics.html]

Similar Messages

  • Need some help, big time.

    Aloha:
    I  went through the whole Airport Express procedure (about 20 times) and finally came up with a green light on my Airport Express.  So I took it to a spot in my house where the signal from my Airport Extreme gave me two bars on my iPad.
    I plugged in the airport express looking for the big increase in my iPad signal, but it remained on two bars.   No increase in signal strength what-so-ever!
    What might I have done to bring this about?
    I am about ready to chuck the AirPort Express into the deep blue Sea.
    Thanks
    Dan Page

    Thanks for checking. Let's do some checking on your setup.
    Open AirPort Utility, select your AirPort Extreme first, and click Manual Setup at the bottom. Click on Wireless just below the row of icons, and make sure there is a check mark entered next to "Allow this network to be extended". Jot down the exact setting that you see for Wireless Security here as well. Update to save any changes and allow 25-30 seconds for the AirPort Extreme to restart.
    Temporarily, move the AirPort Express to the same room as the AirPort Extreme and allow 40-45 seconds for it to power up. Open AirPort Utility, select the Express and click Manual Setup. Click on Wireless below the row of icons. Your settings should look like this:
    Wireless Mode = Extend a wireless network
    Wireless Network Name = Name of your AirPort Extreme wireless network
    Enter check mark next to Allow wireless clients
    Wireless Security = Exact same setting as your AirPort Extreme
    Wireless Password = Same password as the AirPort Extreme network
    Confirm Password
    Click Update and allow 40-45 second for the Express to restart. Unplug the Express and locate it for now at a point that is about 1/2 the distance from the AirPort Extreme to the area that needs more wireless coverage. Power it up and wait for the green light.
    Then check to make sure that the Express is extending by using the same test earlier in this thread. Check your signal, etc. and please report on your findings.

  • I need some help big time

    my mom has no idea what she is doing and deleted all my songs from my itunes libary but they are still on my ipod is there any way to transfer them from my ipod to back to itunes

    You can't sync your music back from an iPod to iTunes, the transfer of music is designed by default to be one way from iTunes to iPod. However there is a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows posted in this thread: MacMuse - iPod to iTunes
    If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the files from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward.
    iPod Access Mac and Windows Versions
    YamiPod Mac and Windows Versions
    PodUtil Mac and Windows Versions
    iPodCopy Mac and Windows Versions
    PodPlayer Windows Only
    iGadget Windows Only
    Make sure before you start that your iPod is set for manual update. If you are using the iPod in manual update mode, your iPod is safe from being accidentally erased when you connect to an empty iTunes after reinstalling your operating system. However if your iPod is set to automatically update you will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press *No*. Pressing "Yes" will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual.
    You can use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on Windows hold down the Shift + Ctrl keys (on a Mac hold down the Option and Command (⌥ and ⌘) keys). This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer. Then go to Preferences>iPod and check the "Manually manage songs and playlists" box: Managing Your Songs Manually
    Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync again.

  • Need some help and guidance please!

    Hi everyone,
    I desperately need some help because I am at my wits end.   In September I purchased a Compaq Presario CQ60-450US.  Shortly after purchasing, I fresh installed Windows 7 Professional.  Recently I decided to tried to dual boot ubuntu on the machine only to find that the installation failed because of CD read error.  I know for a fact that the CD is not the issue because I have used this CD three other times to install ubuntu thus I came to the conclusion that the CD/DVD drive was bad.  
    I called HP support to get a new CD/DVD drive replaced only to spend 2 hours on the phone with a individual that decided to troubleshoot first trying to install ubuntu remotely (I informed the indiviual that the remote session would end), then by playing a DVD and "skipping throughout" the movie.  He/she said that she could see no issue.  (no diagnostic was run)I informed the individual that I had issues with buring as well.  He/she proceeded to go online and install software asking me to demonstrate the issue after which the call got dropped mysteriously.
    I called HP support back and told them that I am having an issue now burning.  They proceed to connect remotely and look at the software the previous support individual downloaded and said that the software was not supported by HP.  I informed the individual that I give permission to install any software needed to troubleshoot but the individual said that I could not be suppoted because I wasn't using the OS installed by HP.  I was instructed to recover my machine to the OS that was installed with the machine if I was to continue to get support.
    I informed the individual that the drivers and software are the same for either OS considering the CD/DVD rom is a plug and play device.  The individual refused to help and told me I had lost my warranty because of my decision to install an OS directly from Microsoft or a third paper vendor. 
    That is where I stand.  HP is refusing to give me support because I am not running their Vista Home edition even though my issue is hardware.  I cannot find any warrent information stating that I need to have the original operating system installed on the machine to receive support.   Can anyone point me to a reputable division that can help me with my issue?  I feel I was just thrown aside so that they don't have to initiate a repair.  If not has anyone filed a compalint against this outrageous support requirement?   

    Dear ndjumpball,
    I would like to say that I have some good -- or at least encouraging -- advice.  Regretfully, I do not.  I had issues with my dv7 practically since purchasing it a year ago specifically so I would have a reliable computer for school.  My first problem: I bought my laptop a mere 7 weeks before HP started offering their free upgrade to Windows 7.  Consequently, I was forced to purchase the full installation retail or continue to deal with the wonton freezes and system failures that inevitably occurred while I was working on homework -- courtesy of HP's installation of Vista Home Premium 64-bit.  Thankfully, I was able to purchase a copy of Windows 7 Professional 64-bit through a significant student discount offer from Microsoft, and I had my new OS downloaded the evening of October 23, 2009; I had to give their servers time to free up, since it seemed like everyone and their dogs were also downloading what the reviews posted on CNET and PC World touted as being more reliable.  I recall (I can't remember exactly which site this appeared) the statement, "Windows 7 is what Vista should have been from the beginning."
    I was all excited and happy now that I had a laptop for school that had everything I was looking for:  decent size hard drive, a fair amount of RAM, great 17.3" display with awesome colors, and a CDRW/DVDRW/Blu-Ray disk drive in the bay.  Not only was I very satisfied with the hardware; it also came with a decent host of software that are thought was pretty cool, too.  It came with CyberLink's DVD Suite 6 that I could activate simply by touching a soft button above the keyboard.  Aside from Vista Home Premium crashing on me at the most inopportune times, I was exceedingly happy with my $1000 purchase and investment.  Then came the "upgrade" to Windows 7 Professional 64-bit...Because I didn't have a "compatible" version of Vista, I had to do a full ("custom") install.  In other words, I lost all of the cool features I originally bought the machine for in the first place...no more cool one-finger's brush software activation (still don't have that working), and HP Chat Support told me the same thing they told you.  The following is a direct copy/paste quote from an email response I received from HP Total Care:  "In order to help you relevantly I would like to request you to please revert back to Vista operating system and check whether the issue is persisting or not.  If the issue is still persisting after reverting the operating system back to vista then we need to perform system recovery."
    After pursuing my case for 6 months -- finally getting my case escalated to two HP Customer Care Case Managers in Texas/Oklahoma -- the best "customer support" I received was what I'm sure was a truly heartfelt and sincere apology...  Oh, neither case manager was "able" to send me either the true upgrade disks that would have preserved the features purchased, nor were they willing to send me a stand-alone installation of the CyberLink’s DVD Suite 6 that is currently offered with the HP Pavilion dv6t Quad Edition series.  (In massive frustration and anger, I bought the CyberLink’s DVD software - $100 I didn't have to spend on something I had already bought...)
    A month later (late March), MY CD-RW/DVD-RW/Blu-Ray drive stopped working.  After an hour online with Customer Care, I had finally convinced the rep that the drive was working fine after my ditching Vista Home Premium, and that its failure had absolutely nothing to do with Windows 7 Pro.  After giving the guy my credit card number as security, I had a replacement drive shipped to me.
    My personal recommendation:  clearly state that the hardware failure had nothing to do with whatever software or OS you chose to install.  Bottom line:  your computer is only 8 months old and is still covered under warranty, they can replace the defective part, or you can return the entire machine.  You probably want to be the "Nice Guy" but you need to remind them that you have other brands available to purchase.
    I don't know if that helps or not, but thank you for giving me the opportunity to vent!  :-)

  • Need some help frist time useing dreamweaver

    Hey all,
    I am totaly new to Dreamweaver and am needing some help. I am
    needing to make a feedback form. Would need it to e-mail me the
    feedback to something like [email protected] I also need to know
    how to make a footer for the copyright and desiged by, on each page
    without having to manually entering them. Any help I could get
    would be awsome.

    There are only two ways to process form data -
    1. Use mailto:[email protected] as the action of the form
    2. Use a server-side scripting method to a) harvest the
    form's data, b)
    process it in some manner, e.g., enter it into a database, c)
    formulate and
    send an email to one or more email recipients, and d)
    redirect the visitor
    to some ending page
    Method 1 is quite simple, and is also the least reliable. It
    depends both
    on your visitor having an email client already installed on
    their computer -
    this eliminates public computers, or home users without email
    clients
    installed (more and more it seems) - and on the installed
    email client
    responding to
    the mailto call. It is not possible to use this method *and*
    send the
    visitor to a
    thank you page as well.
    Method 2a is the preferred method, since it eliminates the
    problems of
    method
    1, but it means that you have to grapple with
    server-scripting somehow (ASP,
    CF, PHP, perl, etc.).
    Method 2b would be to use some third-party form processing,
    like
    http://www.bebosoft.com/products/formstogo/.
    You would have to decide which of these methods is best for
    your needs,
    but if it's Method 2a, then start by asking your host what
    they provide for
    form
    processing. If it's 2b, then read their FAQ/instructions
    carefully.
    For your footer, investigate the use of DW's Templates (use
    F1 Help to read
    about them), or of server-side includes (again, F1 Help will
    give you some
    info here, as will Google).
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Xysos_Designs" <[email protected]> wrote in
    message
    news:[email protected]...
    > Hey all,
    > I am totaly new to Dreamweaver and am needing some help.
    I am needing to
    > make
    > a feedback form. Would need it to e-mail me the feedback
    to something like
    > [email protected] I also need to know how to make a
    footer for the
    > copyright
    > and desiged by, on each page without having to manually
    entering them. Any
    > help
    > I could get would be awsome.
    >

  • Basic Output program need some help...Please

    import java.io.*;
    class FileOutputDemo
    public static void main(String args[])
    int one=1, two=2, three=3;
         FileOutputStream out; // declare a file output object
         PrintStream p; // declare a print stream object
         try
              // Create a new file output stream
              // connected to "myfile.html"
              out = new FileOutputStream("myfile.html");
              // Connect print stream to the output stream
              p = new PrintStream( out );
              p.printf ("This is written to a file %d", one);
              p.close();
         catch (Exception e)
              System.err.println ("Error writing to file");
    }Hello I am new to java, and I hope someone help me to modify the above code in order to make it work as the following:
    I have a list of integer values like 1, 2, 3, 4? 10
    And I want the program to substitute the integer values (the integer declared list) subsequently one by one to output a new html file as the following output:
    This is written to a file 1
    This is written to a file 2
    This is written to a file3 ?etc
    Also this substitution has to be outputted to a new file every time.
    Thank you very much in advance for your kind help
    if i have to post this anywhere else please advise me..
    Adam

    import java.io.*;
    public class FileOutputDemo
        public static void main(String[] args) {
             FileOutputStream out; // declare a file output object
             PrintStream p; // declare a print stream object
             try
                  // Create a new file output stream
                  // connected to "myfile.html"
                  out = new FileOutputStream("myfile.html");
                  p = new PrintStream( out );
                  int[] arrayOfInts = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 };
                for (int element : arrayOfInts)
                     p.printf (element + " ");
                  p.close();
                  // Connect print stream to the output stream
             catch (Exception e)
                  System.err.println ("Error writing to file");
    }ok .... guys i really understand what do you mean,
    i only need your help to make the program print one integer at a time from the array to a seprate file ....what do you suggest ... any hints
    Thanks

  • Need some Help in Design please...

    Hi All,
    I am creating dimensions for my sales cube in which I am going to store Day level data with Customer and Material Data. I have to store all the Customer and Material Groups (1-5) in the cube as most of the reports are based on them. I have planned to created 2 seperate dimensions for Customer and Material and include all the Group fields as well in the respective dimensions. But, as Customer and Material master data itself are gonna be big, I am bit confused if it creates a performance issue if I include the groups in the same dimension. I remember that there is a rule like Dimension table should be < x% of cube (I didnot remember the exact figure)...Any suggestions on this design please...
    I am in the process of creating process chain for my FI-GL and FI-AR flows. I am loading both line item and transaction level data for both of them. I am confused if I can include both the flows in the same chain or seperate ones? What is the sequence in loading the data i.e First Transaction or line item? First GL or AR? Any such dependencies?..Any help please...
    Best Regards,
    James.

    Hi,
    Generally, if we need to take Characterstics like Document no as part of the cube then we define them as line item dimensions, becuase we can easily predict that the no of entries in  those dimensions are almost equal to fact table entries. So ask your business process team to tell about no of new entries created for Material and customers.On that basis you can decide whether it should be a Line item Dimension or not. It is juat a hypothetical assumption.
    For further info on how to decide which dimension is line item dimension, search the forum.
    And comming to chain:
    You can go with that design.
    With rgds,
    Anil Kumar Sharma .P

  • Hey I need some HELP!! Please, it's important...

    Hi everybody! First post in here...well today I accidentally installed iTunes 7.6 pressing "software upgrade". Since I'm using OSX 10.4.8 iTunes 7.6 doesn't open: it pops out kind of "need the OSX upgrade for 10.4.9 or 10.4.10 up!!"...I can't upgrade to 10.4.10 or 10.4.11 because of Pro Tools (7.1 version can give some trouble with these OSX versions).
    WHAT SHOULD I DO??
    Should I uninstall iTunes 7.6? Just by trashing it and then using an old version (which one would you suggest)?? I found (http://mac.oldapps.com/itunes.php) old iTunes version...but I actually can't remember which one I was using (it worked great with my 10.4.8).
    Gotta say I'm a little bit scared...thanks in advance!
    Hed

    Searching in the forum, I found this...
    "To downgrade - D/L what version you want at - http://www.oldapps.com/downloadiTunesmac.php
    Go to HD>Library>Receipts - remove the iTunesX.pkg to the trash.
    Drag your iTunes app to the trash. B/U your iTunes Library and .xml files. B/U your iTS purchases.
    Repair permissions with Disk Utility - install iTunes - repair permissions again.
    Open iTunes - if all is well you can empty the trash.
    MJ"
    But which version should I use with OSX 10.4.8??
    Any help?
    ...Hed

  • TS3694 enyone???.....i need some help,...please...i have the 1611 code error,the phone does nothyng,he does.t restart,in the phone main screen,he show me to conect with itunes and that.s  it,i think it.s  block....what can i do???????

    Hy everyone!!!...please, help me,i realy dont no what else can i do,the phone its block i think,cus give me the1611 code error at the time i want to reiniciatet or restarded(with itunes or without);thanks!

    hey...!!!!!! i am also facing the same problem but my error code was 1602 and now after that problem my iphone got connected to ituns but it is showng restore option afte doing once....its again showing that option ..........help me if you know something

  • Need some help understanding AUR please solved

    Still learning the command line here sooooo....
    I've read and reread everything recommended regarding AUR.
    Somewhere I'm overlooking or missing something.
    The AUR users guide says to:
    Users can access the AUR [community] repo by adding/uncommenting this line in their pacman.conf file:
    Include = /etc/pacman.d/community
    Well that line doesn't exist so the guide says to:
    If /etc/pacman.d/community does not exist then it should be created and contain the following:
    [community]
    Server = ftp://ftp.archlinux.org/community/os/i686/
    Evidently I might have a pacman.d/community, but when I pull it up with nano, it's a totally blank page which leads me to believe it's there but not actually created.
    I can't find anything that tells me what I need to do to make sure I've created a pacman.d/community.
    Is a blank page right or shouldn't there be some text in there with comments?
    I can and have installed a few things with yaourt, but I know that I've been lucky so far with that as I know something isn't right.
    I have to use my user password and then my root password in that order or nothing will finish installing so I've stopped using it until I have a better understanding of it.
    Man,, all I wanna do is try out doom3-phantasm,,, for now anyway.
    Last edited by windtalker (2008-04-04 00:40:26)

    windtalker wrote:
    Floke:
    I tried that, pacman won't synch with that addy.
    Brebs;
    That's how pacman.conf is set for all the repo's listed. [mirrorlist]
    I know phantasm is in unsupported, I'm trying to figure out how to get unsupported added to pacman so I can get it.
    Theringmaster:
    Yaourt is installed and as I've said I've used it, but, as I also said, each time I use it just before it completes the install it asks for my password, which is fine, but I have to first enter my user password which it refuses, then my root password which it accepts.
    It flat wil not settle for me simply using my root password like it should.
    I've tried several times and this is something that I'm missing also somewhere somehow.
    To my way of thinking, it should be like pacman and accept my root password no questions asked.
    I'll also add that I've tried installing phantasm with yaourt.
    It found all the depends and compiled the complete package.
    When it came to the stage to do the actual install, it asked for a pasword.
    I've tried my user pasword followed by my root password and was kicked out.
    I've tried just my user password and was rejected.
    I've tried my root password and was rejected and when re-entered was kicked out.
    Unless things have changed with Arch and the guide is out of date, there should be a way to add unsupported to pacman.
    I'll try flokes suggestion of changing the permissions in sudo and see what happens.
    Thx guys.
    edit: How the heck does one save a change in VI?
    you do have to have sudo installed and configured (just a three step process see wiki) to use yaourt properly. to save a change in vi press :wq

  • Needing some help with Time Capsule Error.  New to Apple Support and not super tech smart.

    Can not get the MacBook Pro to back up to Time Capsule.  Can any one help me with the following Error Please?
    The backup disk image “/Volumes/Data/XXXXXXXXXX MacBook Pro.sparsebundle” is already in use.

    We don't see that error much but it is about the easiest to fix.
    Pull the power on the TC.. count to 10. Plug the power back into the TC.
    Viola.. working TC again.

  • I need some help. first time mac user.

    I have an airport express unit that I want to set up through a laptop using windows xp, and I want to be able to connect to the internet wirelessly through my new macbook pro. Please help me.

    Hello
    Try This:
    1. Download Airport Setup for Windows and Install (v5.3.1.9)
    http://www.apple.com/support/downloads/airportutility531forwindows.html
    2. Connect your DSL or cable modem to the Ethernet port on your AirPort Express.
    3. Open AirPort Utility, select your AirPort Express, and click Continue.
    4. Follow the on screen directions
    5. If you have a cable modem which is also used for a phone line, you might have a problem with the cable modem assigning a valid DHCP number. This happened to me and unplugging the modem does no good because it has a battery. If this is your case, you will have to unplug the cable modem and remove the battery, then replace the battery, hook back to the Airport express and plug back in.
    6. If none of these things help, then post back and I'll see if I can help you figure it out.
    Dr. P

  • Need some help asap! Please

    I'm typing up a long paper, and I have a outline that I made in outline form.
    ie -
    I.
    A. xxxxx
    B. xxxxxxx
    Now what I want to do is go under each line in my outline and make remarks. What I want to do is start my comment where the first letter of the outline is (for instance, under the first "x" of letter A.)
    What I'm doing is going to the inspector and change the option under "follow paragraph style" to "free form", then I hit enter, tab over, and it works. But every time I to go the time line it goes back to "original" and I have to change it back to "free form"
    Is there a way to keep it on "Free form" so I can just in my outline? is there any eaiser way to do what I'm trying to do? I really need to get this done tonight.
    thanks!

    You need to redefine your list style.
    What you are going to do is the 3rd level will be indented but have no number.
    Create a sample of the list text with only the 3 levels
    Select the 3rd level text and go:
    +Inspector > Text > List > Bullets & Numbering > No Bullets+
    This will be indented too far in.
    With the 3rd level still selected:
    +Inspector > Text > List > Bullets & Numbering > Text Indent: 0.2 cm (in my case)+
    till it aligns with above.
    Now select the whole range of the 3 level list:
    +Menu > View > Show Styles Drawer > List Styles > click on tiny triangle > Create New List Style from Selection… > Give name > OK+
    Use that as your list style from now on.
    Peter

  • Still need some help.. Please!

    I´ve tried to do the tree component transparent so that
    I can see the background thru it but it doesn´t seem to work.
    Do any one know how to do??

    cSource3D=thisComp.layer("Light"); //reference a 3D light as source
    cSource2D=cSource3D.toComp([0,0,0]); //convert to screen coordinates
    cMiddleX=thisComp.width*0.5; //midpoint X
    cMiddleY=thisComp.height*0.5; //midpoint Y
    cDiffX=cSource2D[0]-cMiddleX; //position difference X
    cDiffY=cSource2D[1]-cMiddleY; //position difference Y
    cAngle=Math.atan2(cDiffY,cDiffX); //find angle
    cOffset=200; //distance from middle
    X=cMiddleX+Math.sin(cAngle)*cOffset;
    Y=cMiddleY+Math.cos(cAngle)*cOffset;
    [X,Y]
    Yes, simply copy&paste the above code ( I corrected the typos) to your secondary element and adjust the cOffset variable to suit (you could tie it to a slider, if needed; negative values move in opposite direction). Make sure to adjust the reference to the light in your comp (or your 3D Null). If you use an expression Point control or the Lensflare effect on a solid, you don't need the first line and the second line would then look something like that:
    cSource2D=thisComp.layer("Lensflare").effect("Lens Flare")("Flare Center")
    Mylenium

  • I need some help here. someone please respond with some type of idea.

    okay, here's the deal
    when i take the Ipod out of the usb, i cut it on, and it's just a constant green light in the front that wont go away. it wont play, and wont have any affect on the buttons or anything. it's just a steady green light.
    it wont show my battery life until it's cut off.
    do you have any idea what's going on?
    i'm so uber angry it isn't funny.
    P.S.- I've had this ipod for like, almost a year.

    okay, here's the deal
    when i take the Ipod out of the usb, i cut it on, and
    it's just a constant green light in the front that
    wont go away. it wont play, and wont have any affect
    on the buttons or anything. it's just a steady green
    light.
    it wont show my battery life until it's cut off.
    do you have any idea what's going on?
    i'm so uber angry it isn't funny.
    P.S.- I've had this ipod for like, almost a year.
    See if this helps:
    http://docs.info.apple.com/article.html?artnum=303332

Maybe you are looking for