Need some Help Creating Widescreen Video???
Got a simple question (hopefully) from a first time user of Final Cut Express.... I'm trying to make my son's birth video in widescreen format. I must have accidentally changed something on the settings. (b/c I burned a video once before with FCE and it played in widescreen format). For some crazy reason this video will not play in widescreen and I cannot figure out what I've done wrong. I hate to start the project over, b/c I've spent so much time on it already.
Hoping it's simple......Can anyone help me?
Thank you!
We shot in widescreen format. Our new video recorder that we used is Canon HD 1920x 1080 Recording.
The item properties of the Sequence I edited are: Creator- QuickTime Player, Source- Macintosh HD, Size- 1.1 GB, Vid Rate- 29.97 fps, Frame Size- 720x 480, Compressor - H.264, Data Rate- 620.1 K/sec, Pixel Aspect - NTSC - CCIR 601, Field Dominance - Lower (Even), Alpha - None/Ignore, Composite- Normal.
Not sure how to find the item properties of the slip I captured.... working on that right now
Similar Messages
-
Need some help in saving video message from viber to my Iphone 5S with new ios 8's program . I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery" thing but it doesn't save in gallery. I tried all, restarting my phone, rebooting then turning on the save automatically thing and when I watch it again, it still wouldn't save.
Probably a good question to ask Viber or look at their support site.
-
I need some help with my video - need to blur some footage.
Hi!
I was wondering if somebody could help me out with my video. I've got some video footage downloaded from the internet (with permission, of course) and I was wondering if there is any way I could blur the clip and then have it slowly fade into focus. I know how to blur the video (the Gaussian blur effect), but I basically want it to look like I've filmed the footage myself and I'm slowly turning the focus wheel until the image is in focus.
Obviously it's quite easy to do in-camera but for my film I needed footage of animals and wasn't able to film any of my own so I needed to source footage online. It's really imperative to my production that I get this blur thing working so if anyone can please explain to me the easiest way to do it then I would be extremely thankful! (That's if it is possible at all... I sure hope so)
I've searched online but so far I've only been able to find videos explaining how to blur a small section of the image (e.g. blurring out logos, faces, etc)
Thanks a lotFor what you want to do, the 'Camera Blur' effect (Windows only)
will work much better than Gaussian Blur.
Add the effect to the clip (or to an Adjustment Layer above to the clip),
then use keyframes to change the amount of blur over a specified
period of time.
Camera Blur effect (Windows only)
http://help.adobe.com/en_US/premierepro/cs/using/WS1E7C690B-2342-43c3-9253-2BAAFF4168EF.ht ml#WS1c9bc5c2e465a58a91cf0b1038518aef7-7deaa
Adjustment Layers - Pr
http://helpx.adobe.com/premiere-pro/using/help-tutorials-adjustment-layers.html#id_1358
Adding, navigating, and setting keyframes - Pr
http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7e63a .html
WS3878526689cb91655866c1103906c6dea-7df0a.html -
I need some help on transferring videos to my 5th-gen. iPod
My "Tetris" game will not dowload to my iPod. There are also several South Park and Jackas episodes, and music videos that I purchased from the iTunes store that will not sync to my fifth generation iPod with video. How can I get these videos and game to download, and why aren't they? One of the common error messages that comes up is:
iTunes could not sync [file] to [my] iPod because the file is corrupt and could not be read.
Reposting the files on my account did not work, at least for the game. Please help me. My problem is not an issue of authorization, due to separate accounts. Please shed some light on my problem, and thanks.Firmware is basically the internal OS (operating system) software in which your iPod runs on.
A "Firmware update" can be found in iTunes (if you aren't updated to the latest version of internal software for your iPod), which updates your iPod's OS (operating system).
New firmware update versions usually do not make a noticable change on your iPod, unless the last firmware update contained a bug, where is slowed your iPod down, for example, and the new firmware is tweaked from the last version, and doesn't slow down your iPod anymore.
Also, iTunes and your computer will call a firmware update/software the "firmware files", because a computer will read what an update contains, by how its files are... just another bit of info.
I hope that explains it.
-Kylene
If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards! -
I'm creating a program that allows you to order a pizza. It is a border layout with section containing different grid layouts that are contained within there own classes in separate files. My question is that I'd like to produce a running total for the cost of the pizza but I'm having trouble getting the classes to "talk" to each other. How would I go about being able to access a double value that is in one class and use it in another class?
Thanks for the input. I think I've got that part of the program figured out, now my problem is how to add an action listener to a JComboBox. What I have is a combobox that represents the quantity of pizzas to be ordered. All I need it to do is set the variable Quant equal to the current selection but I'm having a hard time calling the current selection. Here's what I've got so far
// QuantityPanel
// Sets up the quantity panel
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
public class QuantityPanel extends JPanel
public static double sodaPrice = 1.5;
public static int Quant;
public QuantityPanel()
setLayout (new GridLayout(10, 1,0,0));
JLabel quantity, beverages, space;
quantity = new JLabel ("Number of Pizzas:");
beverages = new JLabel ("Beverages:");
space = new JLabel ();
int choices[] = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10};
String bev[] = {"Pepsi", "Mt. Dew", "Dr. Pepper", "Sierra Mist", "Root Beer",
"Water"};
JComboBox numpizzas = new JComboBox();
JComboBox beverage = new JComboBox();
for (int i=0;i<choices.length;i++)
numpizzas.addItem (choices);
for (int x=0;x<bev.length;x++)
beverage.addItem (bev[x]);
numpizzas.addActionListener (new ComboListener());
add (quantity);
add (numpizzas);
add (space);
add (beverages);
add (beverage);
private class ComboListener implements ActionListener
public void actionPerformed (ActionEvent event)
if (current == 1)
Quant = 1;
else Quant = 1;
if (current == 2)
Quant = 2;
else Quant = 1;
if (current == 3)
Quant = 3;
else Quant = 1;
if (current == 4)
Quant = 4;
else Quant = 1;
if (current == 5)
Quant = 5;
else Quant = 1;
if (current == 6)
Quant = 6;
else Quant = 1;
if (current == 6)
Quant = 6;
else Quant = 1;
if (current == 7)
Quant = 7;
else Quant = 1;
if (current == 8)
Quant = 8;
else Quant = 1;
if (current == 9)
Quant = 9;
else Quant = 1;
if (current == 10)
Quant = 10;
else Quant = 1; -
Need some help in creating Search Help for standard screen/field
I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewardedHi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh -
Ok i have indesign CS6 and all files are stored on a 10.7.5 MAC server. This just started happening. When I open a file indesigns is creating a textfile in the same folder? I need some help on this.
Ask in the ID forum and be much more specific about your configuration. there could be any number of reasons why manifests, temp files or restore files are created.
Mylenium -
I need some help , for create some paper on air
Hi everyone
I need some help , i work in a static sequence from Tehran street (1 frame), i paint damages on this frame in Photoshop because i need war atmosphere, then i add some smoke and cloud with particular .
but i think this sequence is not realistic yet
now i want add some moving paper in air and on street
do u have any solution for how can i make this paper and moving those
Thanks a lot
and pardon me for bad English
Ali MolaviThe best tool to add this kind of particle is After Effects.
If you have the Creative Cloud then I recommend you download that.
Slightly annoying voice over, but here is a youtube tutorial you can follow top make floating particals. You can adjust it to make it look exactly as you want.
http://www.youtube.com/watch?v=dq2op6yqvFk&noredirect=1 -
Need some help learning cue points, etc
I need some help with a Flash project I'm working on. If any
Flash junkies out there are up for sitting down with me through
email or IM and helping me get to the point where I have a template
FLA doing what I want to do, I'd be willing to pay you. It wouldn't
be much, but it would be something. Here's what I'm trying to do:
I need to create an interactive talking-head style flash
presentation with a number of progressive download externally
linked FLV files, playing in succession, supported by movie-clip
text animations and supporting graphics which are triggered by cue
points in the video. I also need a simple navigation menu linking
to the FLV files. I've got some of this down already, namely, I've
laid the FLVs in and they are playing in succession. I'm stuck on
the cue point part. At this point I really just need some hands-on
help. I've bought books, I've scoured the web.
I'm easy to communicate with, and I'm good with computers and
comfortable in many multimedia design programs. Flash is very
powerful, but tougher to learn than I expected, and I'm at the end
of my rope =PMy advice... start with a very simple "proof of concept" project before you attempt the entire package.
It will be much easier to scale up if you first have a very good understanding of what's going on.
So one simple video with just one cuepoint and only one button and additional display. You'll also have to work out the interaction of pausing the video when a cuepoint is reached or button pushed to display the graph, giving the viewer time to read the graph... then when the viewer closes the graph, the video should "resume".
Start very simple and build on that only after you understand the fundamentals.
Second, you mention "video reports"... plural. So that most likely means that you will need a video player with a "playlist".
This may mean that you'll need to learn to use a little .xml to bring in the playlist data. You may also find xml an excellant way to bring other data into you project.
At the link listed above there is an excellant tutorial on "Integrating Flash and XML"
"Flash and XML"
"XML Video Playlist"
"ActionScript 3 XML Basics"
"ActionScript 3 Advanced XML"
Personally I would not even begin a project like this without considering how I could use xml to feed data into the project.
Here's an example of a video player I created that has a playlist, thumbnails, categories, transcipts, "Now Playing" etc. All that data comes into the main .swf via various xml files. Super good way in input data into Flash.
http://www.drheimer.com/video/
Yours is a rather ambitious project and will take awhile to gain the skill and assemble the pieces. So when you come to a new part... first create a real simple "proof of concept" model so you can learn how that section works. Don't expect to be able to assemble the entire project all at once.
Best wishes,
Adninjastrator -
Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now. -
TS1702 I need some help the apps were downloading slowly
The apps downloaded but it didn't cause it's stuck in downloading mode what should I do?
The iOS 6 update didn't work.
Please I need some help.
The apps didn't download.
Talking Angela and Ginger didn't download.
Talking Santa didn't update.Try moving the existing backup file to a safe location so that iTunes has to create an entire new file. The backup file is located here. You can delete that backup once you get a successfull backup.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: If you do not see the AppData or Application Data folders, you may need to show hidden files (Windows XP, Windows Vista and Windows 7), or iTunes may not be installed in the default location. Show hidden files and then search the hard drive for the Backup directory. -
I need Fusion help creating a demo of BRM JCA Resource Adapter
I need Fusion help creating a demo of BRM JCA Resource Adapter.
I know BRM well but am clueless with Fusion.
I am trying to figure out what Fusion products to download and install and how I manipulate the Fusion side to manipulate BRM.
My BRM docs say:
Installing the BRM JCA Resource Adapter ->
Software requirements
(yada yada install a bunch of BRM stuff I know how to do)
The adapter must be deployed on a J2EE 1.4-compliant application server that has implemented the JCA 1.5 specification. The adapter runs only in a managed environment. (Does this imply some particular Fusion package?)
(more yada yada about installing more BRM packages I know how to do)
Deploying and configuring the BRM JCA Resource Adapter ->
Overview of the BRM JCA Resource Adapter configuration procedure
The procedure for setting up the BRM JCA Resource Adapter includes the following tasks:
Installing the adapter on your BRM system, if you have not already done so. See Installing the BRM JCA Resource Adapter.
Generating the schema files for the adapter. See Generating the schema files for your system. (links to some BRM commands np)
Specifying how to construct XML tags. See Specifying the XML tags for extended fields. (links to an oob file included with directions on how to address BRM customizations np)
Generating the WSDL files for the adapter. See Generating the WSDL files for your system. (links to an oob file with directions to configure. I could use some help if/when I get this far)
The last two look pretty important but I haven't a clue. I pasted the text from the docs below.
Deploying the adapter on your application server. See Deploying the BRM JCA Resource Adapter on an Oracle application server.
Connecting the adapter to the BRM software. See Connecting the adapter to BRM in Oracle AS.
Deploying the BRM JCA Resource Adapter on an Oracle application server
The adapter is dependent on Java Archive (JAR) files to deploy properly. The following table lists the JAR files that the adapter requires from each application in your system.
Application
JAR files
J2EE application server
classes12.jar, connector15.jar, and jta.jar
Oracle BPEL process
bpm-infra.jar, orabpel-thirdparty.jar, orabpel.jar, and xmlparserv2.jar
BRM J2EE Resource Adapter
pcm.jar and pcmext.jar
Apache
xercesImpl.jar
If you are deploying the adapter in a standalone Oracle Containers for Java EE (OC4J) instance, make sure these JAR files are available to the class loader that is loading the adapter.
If you are deploying the adapter by using Oracle SOA Suite, these JAR files are available as part of the oracle.bpel.common code source. You import these libraries as follows:
Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
Add the oracle.bpel.common entry (shown in bold below) to the imported-shared-libraries section of the file:
<imported-shared-libraries>
<import-shared-library name="adf.oracle.domain"/>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
Save and close the file.
Restart the application server or the J2EE instance.
After you make the JAR files available, deploy the adapter on the Oracle application server by using either the Oracle Application Server (Oracle AS) Application Server Control (ASC) or the Oracle admintool.jar file. Copy the adapter archive file (BRM_home/apps/brm_integrations/jca_adapter/OracleBRMJCA15Adapter.rar) from the installation directory to a location that is accessible to the adapter deployment tool. You can then open and deploy the archive file on your application server.
After successful deployment, return the applications.xml file to its original settings and add the oracle.bpel.common codesource to the BRM Adapter oc4j-ra.xml file:
Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
Remove the following oracle.bpel.common entry (shown in bold below):
<imported-shared-libraries>
<import-shared-library name="adf.oracle.domain"/>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
Save and close the file.
Open the JCA Resource Adapter oc4j-ra.xml file from the Oracle_home/j2ee/Instance/application-deployments/default/BRMAdapterDeploymentName directory.
Add the oracle.bpel.common entry (shown in bold below) to the oc4j-connector-factories section of the file:
<oc4j-connector-factories...>
<imported-shared-libraries>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
<oc4j-connector-factories>
Save and close the file.
Restart the application server or the J2EE instance.
For more information about deploying the adapter, see your application server’s documentation.
Connecting the adapter to BRM in Oracle AS
You connect the adapter to the BRM software by creating connection pools and connection factories. As part of the adapter deployment, the application server creates oc4j-ra.xml from the packaged ra.xml. The ra.xml file is located in the Oracle_home/j2ee/Instance/connectors/AdapterDeploymentName/AdapterDeploymentName/META-INF directory. For example, Oracle_home/j2ee/home/connectors/BRMAdapter/BRMAdapter/META-INF/ra.xml.
Use the resource adapter home page from the Oracle AS ASC page to create connection pools and connection factories.
Create your connection pool by following the performance and tuning guidelines in Configuring Connection Pooling in OC4J in Oracle Containers for J2EE Resource Adapter Administrator's Guide. See download.oracle.com/docs/cd/B31017_01/web.1013/b28956/conncont.htm.
Make sure you set the pool’s Maximum Connections parameter (maxConnections XML entity) equal to or greater than the Oracle BPEL process manager’s dspMaxThreads parameter. For more information, see Oracle BPEL Process Manager Performance Tuning in Oracle Application Server Performance Guide for 10g Release 3 (10.1.3.1.0) at download.oracle.com/docs/cd/B31017_01/core.1013/b28942/tuning_bpel.htm.
Note To set up JCA Resource Adapter transaction management in BPEL, you must create a private connection pool and set its Inactive Connection Timeout property (inactivity-timeout XML entity) to 0. See About JCA Resource Adapter transaction management in BPEL for more information.
Create as many connection factories as your system needs. For each connection factory, specify the following:
The JNDI location for the connection factory.
The connection pool to use.
How to connect to BRM by using these entries:
Entry
Description
ConnectionString
Specify the protocol, host name, and port number for connecting to the BRM software. For example: ip Server1 12006.
DBNumber
Specify the database number for the BRM database. For example, enter 1 or 0.0.0.1 for database 0.0.0.1.
InputValidation
Specifies whether to validate the input XMLRecord:
True — The adapter validates the input XMLRecord against the opcode schema.
False — The adapter does not validate the input XMLRecord.
The default is False.
This overrides any other validation parameter specified in the WSDL file.
OutputValidation
Specifies whether to validate the output XMLRecord:
True — The adapter validates the output XMLRecord against the opcode schema.
False — The adapter does not validate the output XMLRecord.
The default is False.
This overrides any other validation parameter specified in the WSDL file.
LoginType
Specifies the authentication method:
1 — The adapter logs in to BRM by using the specified login name and password.
0 — The adapter logs in to BRM by using the specified service type and POID ID.
The default is 1.
UserName
Specifies the login name the adapter uses for logging in to the BRM software.
Note This entry is required only if LoginType is set to 1.
Password
Specify the password the adapter uses for logging in to the BRM software.
Note This entry is required only if LoginType is set to 1.
PoidID
Specifies the POID ID. This entry should be set to 1.
ServiceType
Specifies the service the adapter uses to log in to the BRM software.
The default is /service/pcm_client.
You have successfully configured the adapter to connect to BRM.I need Fusion help creating a demo of BRM JCA Resource Adapter.
I know BRM well but am clueless with Fusion.
I am trying to figure out what Fusion products to download and install and how I manipulate the Fusion side to manipulate BRM.
My BRM docs say:
Installing the BRM JCA Resource Adapter ->
Software requirements
(yada yada install a bunch of BRM stuff I know how to do)
The adapter must be deployed on a J2EE 1.4-compliant application server that has implemented the JCA 1.5 specification. The adapter runs only in a managed environment. (Does this imply some particular Fusion package?)
(more yada yada about installing more BRM packages I know how to do)
Deploying and configuring the BRM JCA Resource Adapter ->
Overview of the BRM JCA Resource Adapter configuration procedure
The procedure for setting up the BRM JCA Resource Adapter includes the following tasks:
Installing the adapter on your BRM system, if you have not already done so. See Installing the BRM JCA Resource Adapter.
Generating the schema files for the adapter. See Generating the schema files for your system. (links to some BRM commands np)
Specifying how to construct XML tags. See Specifying the XML tags for extended fields. (links to an oob file included with directions on how to address BRM customizations np)
Generating the WSDL files for the adapter. See Generating the WSDL files for your system. (links to an oob file with directions to configure. I could use some help if/when I get this far)
The last two look pretty important but I haven't a clue. I pasted the text from the docs below.
Deploying the adapter on your application server. See Deploying the BRM JCA Resource Adapter on an Oracle application server.
Connecting the adapter to the BRM software. See Connecting the adapter to BRM in Oracle AS.
Deploying the BRM JCA Resource Adapter on an Oracle application server
The adapter is dependent on Java Archive (JAR) files to deploy properly. The following table lists the JAR files that the adapter requires from each application in your system.
Application
JAR files
J2EE application server
classes12.jar, connector15.jar, and jta.jar
Oracle BPEL process
bpm-infra.jar, orabpel-thirdparty.jar, orabpel.jar, and xmlparserv2.jar
BRM J2EE Resource Adapter
pcm.jar and pcmext.jar
Apache
xercesImpl.jar
If you are deploying the adapter in a standalone Oracle Containers for Java EE (OC4J) instance, make sure these JAR files are available to the class loader that is loading the adapter.
If you are deploying the adapter by using Oracle SOA Suite, these JAR files are available as part of the oracle.bpel.common code source. You import these libraries as follows:
Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
Add the oracle.bpel.common entry (shown in bold below) to the imported-shared-libraries section of the file:
<imported-shared-libraries>
<import-shared-library name="adf.oracle.domain"/>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
Save and close the file.
Restart the application server or the J2EE instance.
After you make the JAR files available, deploy the adapter on the Oracle application server by using either the Oracle Application Server (Oracle AS) Application Server Control (ASC) or the Oracle admintool.jar file. Copy the adapter archive file (BRM_home/apps/brm_integrations/jca_adapter/OracleBRMJCA15Adapter.rar) from the installation directory to a location that is accessible to the adapter deployment tool. You can then open and deploy the archive file on your application server.
After successful deployment, return the applications.xml file to its original settings and add the oracle.bpel.common codesource to the BRM Adapter oc4j-ra.xml file:
Open the Oracle_home/j2ee/Instance/config/applications.xml configuration file for the J2EE instance.
Remove the following oracle.bpel.common entry (shown in bold below):
<imported-shared-libraries>
<import-shared-library name="adf.oracle.domain"/>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
Save and close the file.
Open the JCA Resource Adapter oc4j-ra.xml file from the Oracle_home/j2ee/Instance/application-deployments/default/BRMAdapterDeploymentName directory.
Add the oracle.bpel.common entry (shown in bold below) to the oc4j-connector-factories section of the file:
<oc4j-connector-factories...>
<imported-shared-libraries>
<import-shared-library name="oracle.bpel.common"/>
</imported-shared-libraries>
<oc4j-connector-factories>
Save and close the file.
Restart the application server or the J2EE instance.
For more information about deploying the adapter, see your application server’s documentation.
Connecting the adapter to BRM in Oracle AS
You connect the adapter to the BRM software by creating connection pools and connection factories. As part of the adapter deployment, the application server creates oc4j-ra.xml from the packaged ra.xml. The ra.xml file is located in the Oracle_home/j2ee/Instance/connectors/AdapterDeploymentName/AdapterDeploymentName/META-INF directory. For example, Oracle_home/j2ee/home/connectors/BRMAdapter/BRMAdapter/META-INF/ra.xml.
Use the resource adapter home page from the Oracle AS ASC page to create connection pools and connection factories.
Create your connection pool by following the performance and tuning guidelines in Configuring Connection Pooling in OC4J in Oracle Containers for J2EE Resource Adapter Administrator's Guide. See download.oracle.com/docs/cd/B31017_01/web.1013/b28956/conncont.htm.
Make sure you set the pool’s Maximum Connections parameter (maxConnections XML entity) equal to or greater than the Oracle BPEL process manager’s dspMaxThreads parameter. For more information, see Oracle BPEL Process Manager Performance Tuning in Oracle Application Server Performance Guide for 10g Release 3 (10.1.3.1.0) at download.oracle.com/docs/cd/B31017_01/core.1013/b28942/tuning_bpel.htm.
Note To set up JCA Resource Adapter transaction management in BPEL, you must create a private connection pool and set its Inactive Connection Timeout property (inactivity-timeout XML entity) to 0. See About JCA Resource Adapter transaction management in BPEL for more information.
Create as many connection factories as your system needs. For each connection factory, specify the following:
The JNDI location for the connection factory.
The connection pool to use.
How to connect to BRM by using these entries:
Entry
Description
ConnectionString
Specify the protocol, host name, and port number for connecting to the BRM software. For example: ip Server1 12006.
DBNumber
Specify the database number for the BRM database. For example, enter 1 or 0.0.0.1 for database 0.0.0.1.
InputValidation
Specifies whether to validate the input XMLRecord:
True — The adapter validates the input XMLRecord against the opcode schema.
False — The adapter does not validate the input XMLRecord.
The default is False.
This overrides any other validation parameter specified in the WSDL file.
OutputValidation
Specifies whether to validate the output XMLRecord:
True — The adapter validates the output XMLRecord against the opcode schema.
False — The adapter does not validate the output XMLRecord.
The default is False.
This overrides any other validation parameter specified in the WSDL file.
LoginType
Specifies the authentication method:
1 — The adapter logs in to BRM by using the specified login name and password.
0 — The adapter logs in to BRM by using the specified service type and POID ID.
The default is 1.
UserName
Specifies the login name the adapter uses for logging in to the BRM software.
Note This entry is required only if LoginType is set to 1.
Password
Specify the password the adapter uses for logging in to the BRM software.
Note This entry is required only if LoginType is set to 1.
PoidID
Specifies the POID ID. This entry should be set to 1.
ServiceType
Specifies the service the adapter uses to log in to the BRM software.
The default is /service/pcm_client.
You have successfully configured the adapter to connect to BRM. -
Need some help in debugging this exported script
Below is DDL generated by visio forward engineering tool . The example below consists of 2 test tables with one foreign key.
Forward engineering generated DDL script
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Table1]') AND type in (N'U'))
DROP TABLE [dbo].[Table1]
GO
CREATE TABLE [dbo].[Table1] (
[test] CHAR(10) NOT NULL
, [test2] CHAR(10) NULL
GO
ALTER TABLE [dbo].[Table1] ADD CONSTRAINT [Table1_PK] PRIMARY KEY CLUSTERED (
[test]
GO
GO
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Table2]') AND type in (N'U'))
DROP TABLE [dbo].[Table2]
GO
CREATE TABLE [dbo].[Table2] (
[test2] CHAR(10) NOT NULL
GO
ALTER TABLE [dbo].[Table2] ADD CONSTRAINT [Table2_PK] PRIMARY KEY CLUSTERED (
[test2]
GO
GO
ALTER TABLE [dbo].[Table1] WITH CHECK ADD CONSTRAINT [Table2_Table1_FK1] FOREIGN KEY (
[test2]
REFERENCES [dbo].[Table2] (
[test2]
GO
GO
When i converted this DDL script using scratch editor the migration tool gave some errors can anyone help me to resolve below
DECLARE
v_temp NUMBER(1, 0) := 0;
BEGIN
BEGIN
SELECT 1 INTO v_temp
FROM DUAL
WHERE EXISTS ( SELECT *
FROM objects
WHERE OBJECT_ID_ = NULL/*TODO:OBJECT_ID(N'[OPS].[Table1]')*/
AND TYPE IN ( N'U' )
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
IF v_temp = 1 THEN
TRUNCATE TABLE Table1;
END IF;
END;
CREATE TABLE Table1
test CHAR(10) NOT NULL,
test2 CHAR(10)
ALTER TABLE Table1
ADD
CONSTRAINT Table1_PK PRIMARY KEY( test );
--SQLDEV:Following Line Not Recognized
DECLARE
v_temp NUMBER(1, 0) := 0;
BEGIN
BEGIN
SELECT 1 INTO v_temp
FROM DUAL
WHERE EXISTS ( SELECT *
FROM objects
WHERE OBJECT_ID_ = NULL/*TODO:OBJECT_ID(N'[OPS].[Table2]')*/
AND TYPE IN ( N'U' )
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
IF v_temp = 1 THEN
TRUNCATE TABLE Table2;
END IF;
END;
CREATE TABLE Table2
test2 CHAR(10) NOT NULL
ALTER TABLE Table2
ADD
CONSTRAINT Table2_PK PRIMARY KEY( test2 );
--SQLDEV:Following Line Not Recognized
ALTER TABLE Table1
ADD
CONSTRAINT Table2_Table1_FK1 FOREIGN KEY( test2 ) REFERENCES Table2 (test2)
--SQLDEV:Following Line Not Recognized
;Pl do not post duplicates - Need some help in debugging this script
-
working on a music video that needs some help. I own Final Cut and Color. Done the edit and it looks great but it needs help polishing and I have no idea what to do. Planning on showing the video this friday night in hollywood and I want it to blow people away. Is there anyone in the area would be willing to help? Please contact me ASAP. Thanks Ray
if you can give me a call that would be best, I can tell you what I need to accomplish. Thanks
818 935 5079 -
Hi! I got Movies on my external hard drive that are AVI kind and won't play on my macbook pro? When I start playing the movie a message pops up and says "a required codec is not available". I tried flip4mac, xvid, divx already and still not playing my video. need some help please!! thanks.
Although vlc mentioned above is a much more powerful and better player you could try installing Perian if you insist on using the quicktime player. It may supply the codec it needs.
Not sure why you wouldn't be able to play straight avi files though in quicktime.
Maybe you are looking for
-
KT4V BOOT Problems please help quick
ok i just got everything running again, then i replaced the cup heatsync and fan. now, everything starts up, cd roms spin up, hdd's spin up, but the monitor shows nothing at all the usb mouse does not light up. please help me figure out whats wrong,
-
What is the correct file version?
Why does it appear that there are differing file versions for Firefox, Thunderbird and SeaMonkey depending where you look? Windows Explorer show one file version for example 1.9.2.3951 is the 3.6.12 product version but yet our SCCM reports 1.9.2.12 f
-
Video in 16:9 Motion menu preview being cropped
I can't find any discussion on this but am maybe asking the wrong question. How do I get the 16:9 preview buttons on a 16:9 motion menu to play without cropping the top and bottom of the source clip? I don't understand why a 16:9 clip doesn't fill a
-
Is there a System Menu for special Functions, like WIPE CACHE?
On my DX, there was a method of pressing and holding the Menu button & Power up button to get to special "Systems" functions like WIPE CACHE & FACTORY RESET. Does such a procedure exist for the Razr ? I know about SAFE MODE and was able to see that
-
Where is the green screen effect in Elements 13 on a Mac
In the help manual they list different key options, such as blue and green screens. can not find them under keying for the Mac