Need some help figuring out a formula
I need a formula for the following example: http://www.flickr.com/photos/22513617@N05/2198012835/
What I need is that the "Total" column (i.e. C6) automatically takes the above "total" (i.e. C5) and withdraws the "outcome" (i.e. A6) and adds the "income" (i.e. B6) from the same row. I know I can use the formula "=C5-A6+B6" but what can I type to tell it to take the above "total" and withdraw and add the A and B in the corresponding row?
Hope I make myself clear...:-)
Hi Kayelel,
I'm with WWJD in not understanding what you're wanting to do. Why, because the formula you're using is, to my minds eye, doing what you're asking. I recreated your spreadsheet from Flickr to Numbers. Using cell C3 I used your formula then copied down to C6 receiving the same results in the total column as you have in your sheet.
It appears to me you've created the correct formula. Allow me to ask the same question that WWJD asks, "are you wanting to copy the formula down multiple rows"?
If this hasn't assisted you please post back here with additional in-depth information.
Sincerely,
RicD
Similar Messages
-
I need some help figuring out why parts of my form don't work
I have built a couple forms to use with my work, the first 1 is a write up sheet that I fill out while on a field job. When complete, I have an insert button that inserts times, dates customer info and employee info into a MYSQL database that is pertinent to the second form which is a standard type timecard. It is with the timecard form that I am having problems. On the timecard form I have a radio button list with seven buttons (1 for each "start/stop" row of the timecard) when I click a button it makes a subform on the second page visible that allows me to insert the data from my database into the start/stop field of the timecard. I used the action builder to make these subforms visable and invisible and this all works except for 1. Also one of the subforms won't insert the data. I can't for the life of me figure out why, I have gone over both problems and don't see anything to cause it. I was hoping that I could upload my form and database somewhere and have somebody look it over, maybe I have overlooked something but at this point I have studied the problems for 3 days and haven't figured either out. any help would be greatly appreciated
ThanksYes, after the last iOS. So is that different than the App update I just did through the app store? Or is there a different version app that I need to go download again?
-
Hi everyone! I am brand new to InDesign, took a beginner's class on it, bought a Mac, ready to dive in. A friend of mine offered me an amazing opportunity to be the "middle man" for her sticker/magnet distributing business. She already has the artists and she does the printing and distributing (obviously) my job will be to create the cut marks around the artwork to designate where the printer blade should cut.....I have tried googling and you tubing, but my terminology is clearly severely lacking. ANY SORT OF ADVICE WOULD BE GREAT!!! Thank you so much
Here's a method for creating a contour line in ID that might work in many situations to create the die line you'll need:
Place the art, then copy and "paste in place" so you have two stacked images.
For this type of art it's pretty likely that there is a strong edge contrast, even a transparent background, so there's a good chance you can make a decent clipping path. Select the top copy, go to Object > Clipping Path > Options... and set it to detect edges (turn on the preview). Play with the tolerance and threshold sliders (lower numbers are likely to work better) until you get a path that matches the shape to your satisfaction, and set an Inset Frame value if you want to chop off part of the art (not likely) or enter a negative value for moving the line away from the art (very likely). When you're happy, click OK.
Object > Clipping Path > Convert Clipping Path to Frame, then double click on the art inside the newly shaped frame to select the content (or use the direct select tool) and delete it, leaving the frame and the other art behind it intact. Apply a stroke to the contoured frame, colored with a spot color assigned to die lines (die lines are always a spot color so they are on their own plate all alone), and set the stroke to overprint.
Group with the art and you're done. -
I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.
amarilysfl wrote:
"Your disk could not be partitioned. An error occurred while partitioning the disk".
https://www.apple.com/support/bootcamp/
If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
Once it's completed, try creating a partiton again in BootCamp.
If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
reboot and attempt Bootcamp again.
If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
To fix this
BootCamp: "This disc can not be partitioned/impossible to move files."
How to safely defrag a Mac's hard drive -
I need some help with the GUI design.
Have you tried the line inputs on the back of your FirePod? If you update its firmware (not sure if you will need to or not), I seem to remember hearing that the FirePod can run without FW connection, i.e. stand alone. In this mode with the outs from your mixer into line ins 1-2 (2nd from left on the back) it should work fine. I say should because I have never tried. However, these are used for returns from an external effects unit. I assume here, and the important word is assume, that there are two so that they can be used as a stereo send or as a mono send. Worth a try! Let us know how it goes.
Best, Fred -
Need some help with MDX formula
Hello, I am not finding any good documentation on MDX formulas, there is a specific one that I need some help with....could someone please elaborate what exactly does this formula mean? thanks.
(MEASURES.[SIGNEDDATA],
CLOSINGPERIOD([%TIMEDIM%].
[%TIMEBASELEVEL%]))If new MEASURE gets added to Measure's table , in BPC Client , etools->client Options-> Refresh Dimensions should get the new measure into the CurrentView .IF not try etools->client Options-> Clear Local application information .
Formula 2 :
(MEASURES.SIGNEDDATA,
CLOSINGPERIOD(%TIMEDIM%.
%TIMEBASELEVEL%))
This formula is used to retrieve AST & LEQ account values.
If current time member is at monthlevel ,ie ClosingPeriod of 2011.FEB is the current member it self ,and would retrieve 2011.FEB value.
If Current time member is at quarter level then ClosingPeriod of 2011.Q1 is 2011.Mar ,and would retrieve 2011.MAR value.
If Current time member is at year level then ClosingPeriod of 2011.TOTAL is 2011.DEC ,and would retrieve 2011.DEC value.
Formula 1 :
MEASURES.SIGNEDDATA
Irrespective of the level of the Time , MEASURES.SIGNEDDATA would retrieve current Time member value.This formula is used to retrieve INC & EXP account values
if current time member is at month level,2011.FEB , 2011.FEB value is retrieved.
if current time member is at quarter level,2011.Q1 , 2011.Q1(JANFEBMAR) value is retrieved.
if current time member is at year level,2011.TOTAL , 2011.TOTAL(JAN,FEB,....,DEC) value is retrieved.
Hope this helps. -
I have a mac 10.5 and need help figuring out how to change my email settings so it does not automatically delete my inbox every 30 days. How to I adjust the mail settings?
I think it must be an IMAP account then, & in Mail>Preferences>Accounts>Advanced>Keep copies for Offline viewing:>Don't keep copies, then on the Server, or maybe it's just this one itself, but on the Server you have a setting to remove eMails after 30 days.
If it's a POP account we'd have to investigate that... but you didn't say so I'm guessing here. -
Need Help figuring out how to alphabetize itunes artist.
I need help figuring out one more thing. I have my artist tab in my itunes library and I need to figure out how to get all the artists grouped together instead of being scattered all around.
This is how it looks now:
Justin Timberlake
Linkin Park
Linkin Park
Linkin Park
Justin Bieber
Daughtry
Linkin Park
Linkin Park
JoJo
Linkin Park
This is how I want it to look:
Daughtry
Justin Timberlake
Justin Bieber
JoJo
Linkin Park
Linkin Park
Linkin Park
Linkin Park
Linkin Park
Please help! Thanks!Enable the Sort Artist, Album Artist and Sort Album Artist columns so you can see what is going on. Album Artist normally takes precedence over Artist, with the Sort fields further controlling the order.
See also Grouping tracks into albums.
tt2 -
How do I get my previous contacts from mobileme now to the icloud? I need help figuring out how to make that transition?
Try using the app My Contacts Backup, which will back up your contacts as an attachment to an email. Send this email to yourself, open it on your Mac and double-click the attachment to import them to Address Book (or Contacts if you have Mountain Lion).
-
Need some help with threads...
Hello all,
I am working on a project at work, and I am not the best programmer in the world. I have been trying to get my head around this for a couple of days and just cannot get it to work.
I am writing an instrumentation control program that will have three threads. One is the GUI, one will receive control information and set up the hardware, and one will check the hardware status and report it to the GUI periodically. I plan on using the invokeLater() method to communicate the status to the GUI and change the status display in the GUI. Communication from the GUI to the controller thread and from the status thread to the controller thread I had planned on being piped input/output stream as appropriate. I have a control class and a status class that need to be communicated over these piped streams. In some trial code I have been unable to wrap the piped input/output streams with object input/output streams. I really need some help with this. Here is the main thread code:
package playingwiththreads1;
import java.io.*;*
*public class PlayingWithThreads1 {*
public static void main(String[] args) {*
* PipedOutputStream outputPipe = new PipedOutputStream();*
* ObjectOutputStream oos = null;*
* ReceiverThread rt = new ReceiverThread(outputPipe);*
// Start the thread -- First try*
* Thread t = new Thread(rt);*
t.start();*
// Wrap the output pipe with an ObjectOutputStream*
try*
oos = new ObjectOutputStream(outputPipe);*
catch (IOException e)*
System.out.println(e);*
// Start the thread -- Second try*
//Thread t = new Thread(rt);*
//t.start();*
/** Send an object over the pipe. In reality this object will be a
class that contains control or status information */
try
if (!oos.equals(null))
oos.writeObject(new String ("Test"));
catch (IOException e)
try
Thread.sleep(5000);
catch (InterruptedException e)
I read somewhere that it matters where you start the thread relative to where you wrap piped streams with the object streams. So, I tried the two places I felt were obvious to start the thread. These are noted in the comments. Here is the code for the thread.
package playingwiththreads1;
import java.io.*;
public class ReceiverThread implements Runnable {
private PipedInputStream inputPipe = new PipedInputStream();
private ObjectInputStream inputObject;
ReceiverThread (PipedOutputStream outputPipe)
System.out.println("Thread initialization - start");
try
inputPipe.connect(outputPipe);
inputObject = new ObjectInputStream(inputPipe);
catch (IOException e)
System.out.println(e);
System.out.println("Thread initialization - complete");
public void run()
System.out.println("Thread started");
try
if (inputObject.available() > 0)
System.out.println(inputObject.read());
catch (IOException e)
System.out.println(e);
Through testing I have determined that no matter where I start the thread, the thread never gets past the "inputObject = new ObjectInputStream(inputPipe);" assignment.
Could someone please help me with this? There are other ways for me to write this program, but this is the one that I would like to make work.
Many thanks in advance,
Rob Hix
Edited by: RobertHix on Oct 6, 2009 3:54 AMThanks for the help, but that did not work. I tried flushing the ObjectOutputStream and it is still hanging when initializing the thread.
Here is a better look at the code since I was helped to figure out how to insert it:
The main method:
package playingwiththreads1;
import java.io.*;
public class PlayingWithThreads1 {
public static void main(String[] args) {
PipedOutputStream outputPipe = new PipedOutputStream();
ObjectOutputStream oos = null;
ReceiverThread rt = new ReceiverThread(outputPipe);
// Start the thread -- First try
//Thread t = new Thread(rt);
//t.start();
// Wrap the output pipe with an ObjectOutputStream
try
oos = new ObjectOutputStream(outputPipe);
oos.flush();
catch (IOException e)
System.out.println(e);
// Start the thread -- Second try
Thread t = new Thread(rt);
t.start();
/* Send an object over the pipe. In reality this object will be a
* class that contains control or status information */
try
if (!oos.equals(null))
oos.writeObject(new String ("Test"));
oos.flush();
catch (IOException e)
System.out.pringln(e);
try
Thread.sleep(5000);
catch (InterruptedException e)
}The thread code:
package playingwiththreads1;
import java.io.*;
public class ReceiverThread implements Runnable {
private PipedInputStream inputPipe = new PipedInputStream();
private ObjectInputStream inputObject;
ReceiverThread (PipedOutputStream outputPipe)
System.out.println("Thread initialization - start");
try
inputPipe.connect(outputPipe);
inputObject = new ObjectInputStream(inputPipe);
catch (IOException e)
System.out.println(e);
System.out.println("Thread initialization - complete");
public void run()
System.out.println("Thread started");
try
if (inputObject.available() > 0)
System.out.println(inputObject.read());
catch (IOException e)
System.out.println(e);
}Does anyone else have and ideas? -
Need some help with strange sounds in Logic Pro 8
Hi!
I need some help with a problem I have in Logic Pro 8.
When I have arrange window open, suddley strange high tones starts to make noise in my headphones. I don't know where these sounds comes from or why, but I need some help to get them away. Should I just try to contact Apple?
MartinHi Martin
Welcome to the forum. Give everyone here some more info about your set up otherwise it may be difficult to figure out what is wrong.
Which mac?
Which OS?
any hardware devices?
if you are listening through headphones using the built in audio from the mac, you may be hearing fan noise or a hard drive spin noise.
Don -
I'm new to xcode and need some help.
i have written app and it easily launches etc.
but when i add background image to the ui app doesnt launch even though it says that there are no issues.
it highlights these lines in green and says:"thread 1 programm received signal:"SIGABRT"":
return NSApplicationMain(argc, (const char **) argv);I figured out how to solve our problem. I was using a Web View, and I had to add the Webkit.framework to my project to fix it.
I am not sure what framework if for images...sorry...
If you can find the framework, just add it to fix the problem...
Hope I helped!
Thanks,
Adam B -
Help request - Could need some help with a logo for my site
Hi I'm working on a project and i have come across a huge problem.
please check out my logo on this site:
http://www.tuxxen.com
I have no idea how i should make my logo and it seems like i have no skills to make one either, i have been trying for days to make one that look decent but it end up looking really really bad each time.
Could really need some help to get a nice logo up, the site im working on is about fishing, the name of this site will be changed to: Absolut mete. So the logo need to have this name.
I have managed to make the layout for my site but i cannot make a logo its a bit funny really but yeah...
Any help are very much welcome!THANK YOU/___sbsstatic___/migration-images/migration-img-not-avail.png so the tolerance makes it not care so much about the gradations in color? what else is tolerence good for?
I have a cleaner copy now after someone suggested GIMP, so played with it last night - though couldn't figure out transparency - that was clear on converter- just not cooperative till these wonderful directions.
So now I know how to do it without messing with the pic, and with messing with it - both good lessons and got a bit brighter color out of the deal.
many thanks for the straightforward and clear directions, they worked perfectly/___sbsstatic___/migration-images/migration-img-not-avail.png extra strars for you/___sbsstatic___/migration-images/migration-img-not-avail.png -
my husand received a ibook from a customer as a form of payment for some work he did. It works but need some help trying to figure out some things any help will be appreciated. We received it with a admin password so i rebooted it with my new mac os x 10.5.4 to set our own admin password. I can connect to internet with my cable modem no problem however it will not let me open yahoo! it says not a supported browser so i click safari 5 to download and it then tells me that bill of materials is missing any ideas? when i load my mac os x disk it will not load just spins in tray all cds work so dont know why it won't run. It occassionally tells me that classic doesnot have mac os 9 supported?Also any updates i need from this info would also help me out. thank you.
mac os x version 10.3.9 processor 300 mhz PowerPc G3/powerPc 750 (83.2) memory 192 MB L2 Cache 512 kb bus speed 67 Mhz boot rom version 3.2.4f1
ata-4 bus: Toshiba 5.59GB revision N2.10c OS9 drivers:Yes
Safari 1.3.2
I hope any of this helps. Not really wanting to invest alot of money to do modifications just want to be able to do simple tasks like:itunes check email etcHI and welcome to Apple Discussions...
Try repairing permissions.Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
And since you don't the original install disc, boot in Safe Mode to make sure the startup disk is ok.
Instructions for starting up in Safe Mode
What is Safe Mode
It occassionally tells me that classic doesnot have mac os 9 supported?
The original owner probably had the Classic environment installed (Mac OS 9).
For software updates, click the Apple Menu / Software Update...
Carolyn -
Need some help in Rounding a double value to a whole number
Hey Peeps,
Need some help here, I got a method that returns a value in double after a series of calculation.
I need to know how can I round the double value, so for example,
1. if the value is 62222.22222222, it rounds to 62222 and
2. if the value is 15555.555555, it rounds to 15556
How can i do this
ZubHi Keerthi- Try this...
1. if the value is 62222.22222222, it rounds to 62222 and
double d = 62222.22222222;long l = (int)Math.round(d * 100); // truncatesd = l / 100.0;
double d = 62222.22222222;
System.out.println(d);
long l = (int)Math.round(d * 100);
// truncatesSystem.out.println(l);
d = l / 100.0;System.out.println(d);
for (int i = 0; i < 1000; i++)
{ d -= 0.1;}
for (int i = 0; i < 1000; i++)
{ d += 0.1;}System.out.println(d);
regards- Julie Bunavicz
Output:
62222.22222222
62222
62222.22
62222.22000000000001
Maybe you are looking for
-
Update application which uses Web Services library
Hello! I am developing an application in which a Web Service is imported into a LabView Library. My virtual instrument (vi) has some functions/references of the Web Service, used from the lvlib. My problem is that when I update the webservice (change
-
How many NPS server can be registered as radius server in AD
Hi We are using 2x Microsoft (2008 R2 Ent) NPS radius servers for our Wifi authentication for two different SSID on Aerohive WLAN network. Trying to setup radius authentication for our Cisco Network devices and trying to use one of the radius server
-
Hi, I have an active integration model between R/3 and APO. When I create a forecast requirement in APO in the product view (/sapapo/rrp3), it is not reflected in the R/3 (md04). Could you give me some pointers to this? Also, I have similar issue whe
-
I can't sign into mail on icloud
-
What can I do to get any lost songs or photo's back caused by installing the new ios5 software?