Need some help getting my G5 "SCSI" compatible

Aloha:
I need some help getting my G5 to work with my SCSI scanner.
It has been suggested that I use an Adaptec PowerDomain 29160N to connect my Lacie SilverScanner III scanner, which is SCSI.
http://www.adaptec.com/en-US/products/mac/scsi/APD-29160N/
Does anyone have any experience with this unit or another SCSI adaptor that may be of help.
I have a G5 using OS 10.4.8
Any help would sure be of use!
Thanks
Dan Page
Maui, Hawaii

Dan Page-
I've not used this card, but a quick scan of the web page says that it is compatible with Mac OSX 10.3.X. You may want to contact them to verify that it will work with your system.
Luck-
-DaddyPaycheck

Similar Messages

Need some help getting my iTunes over to my new Mabook pro

Hi:
I am trying to populate the iTunes application on my new laptop with my song from my G5 desk top. I failed trying to burn the songs to a DVD. I needed three dvd's to hold all my songs. The process failed on disk one. But it did totally fill the disk with something as the is now worthless. it is not recognized by iDVD.
Help need some ideas.
Thanks
Dan Page
Maui, Hawaii

Hi:
Thank you for the reply, most appreciated.
Did you burn as a data disc? Yes, I used iTunes "file/back up to disc".
Why are you using iDVD to import you music?
I had to use a DVD because I have many songs.
The only error I got was that the first of three DVD's was not usable. I did not burn the next two.
Thanks
Dan Page

Need some help getting my logic express 7 to work!

alright so....i bought logic express 7 about 3 years ago and i HAVE NEVER USED IT! the reason being is because i could never get it to work and gave up 3 yrs ago. i just recently came across again while cleaning out my closet...i tried again but it still wont work...i think it says i need logic express 6 in order to get it work. is this true???? if so, where can i get logic express 6? i've searched everywhere and i can't seem to find it!
can someone please help me out?? i don't want it to go to waste! please?
thanx.
-smitty

sorry disregard...i just saw the sticker that says upgrade for express...idiot!

[SOLVED] Need some help getting the sound to work again

Recently I changed the motherboard and CPU to an AM3 platform, everything works with my previous setup except sound.
Reinstalling alsa-utils and rebooting had absolutely no effect. Google didn't help either.
lspci -v
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 8415
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
Memory at dfff4000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel modules: snd-hda-intel
The motherboard documentation refers to it as "VIA VTI708S".
VLC complains about alsa-lib. Reinstalling it also didn't help.
aplay /usr/share/sounds/alsa/Front_Center.wav
ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4633:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM default
aplay: main:654: audio open error: No such file or directory
alsamixer
cannot open mixer: No such file or directory
Edit:
Damn ASUS font... It's "VIA VT1708S" (number one, not the letter "i") ! Duh. No wonder Google couldn't find any info.
Still, any ideas ? Or would you just rather let me squirm a little and diagnose the problem myself ?
Last edited by DSpider (2010-11-28 18:15:41)

sudo modprobe snd-hda-intel
(I think it's what you tried to tell me, igndenok)
Great. It took the bulk of my day trying to figure out how to get this thing to work.
VolWheel is now set to adjust "Master Front" (it was previously set to "Master" with the old motherboard) and the Sonata volume bar apparently works too, just like I wanted (adjusting the PCM volume by default). Good. Great ! Now I just need to set the "snd-hda-intel" module to load at boot so I don't have to type "sudo modprobe snd-hda-intel" all the time and this thread can be considered SOLVED.
sudo nano /etc/rc.conf
...and add the following:
MODULES="... snd-hda-intel ..."
(also removed snd-ac97-codec from the list because that's what the old mobo used)
THANKS FOR ALL YOUR HELP !
PS: Just out of curiosity, why is it called "snd-hda-intel" ? Why intel ? The CPU is AMD, the chipset is Nvidia nForce, sound is VIA...
Anyone know ? I'll subscribe to this topic just in case anyone knows. Thanks again.
Last edited by DSpider (2010-11-28 18:16:36)

Need some helping getting safari up

OK a friend just got her Mac, the cable internet guy just spent 4 hours at her house trying to get her online. The moden is getting a signal, he doesn't knwo how to get the mac to acquire. I didn't have this issue when setting up mine, and I am not in front of my machine to walk her through it. Will she need to set up an account first, shouldn't she be able to see the cable network? On my machine I just plugged in the line and I was on the net in 3 seconds..????
Can anyone walk me through this to help her get set-up,

Network connection problems can be buggers.
Go to the Network panel in System Preferences
Click on the drop down menu next to Show> Select "network port configuration". Make sure her cable type (Ethernet or Airport) is selected. If it was unchecked, she found her problem. If checked:
Have her open Safari. The page will say "cannot connect etc." with a box below for Network Configuration. Select it and see if the internal help function can make the connection work.
Post back

New to sun/unix need some help getting my solaris express developers workin

well it installed, detected my dvd but during the install process I was not asked any networking questions. I figured perhaps it meant I had to configure that after the fact but alas it says the network admin can't configure the network because the network auto-magic is configured. whatever that means...well I guess it means my ethernet was not found? also a right click screen resolution only gives my 50hz refresh rate and 640x480 so I am guessing that means my video card is not detected either? I have an asus 800se motherboard with built in graphics and ethernet so I guess I will need to get 2 pci cards?
well if so I started to look at the very large hardware list and my head started spinning. so my question is...can anyone here suggest both an older video and ethernet card that I might say be able to find on ebay? because I really don't need anything fancy I am must out to learn sun...old but good and reliable???
thank you.

extendedping wrote:
well it installed, detected my dvd but during the install process I was not asked any networking questions. I figured perhaps it meant I had to configure that after the fact but alas it says the network admin can't configure the network because the network auto-magic is configured. whatever that means...Please see the rest of the message on the network issue:
Please see the nwamd(1M) manpage for more information on
how to configure the system in this operational state.
More information is also available at:
http://www.opensolaris.org/os/project/nwam/phase0/
Did you do a "man nwamd" to see the instructions on what you can do?
-- Alan

Need some help getting add/remove field buttons working

Someone here on the forums had previously assisted me with getting a button set up on a form that would add an additional text field to a form. I now need a separate button created that will delete a text field in case too many were added. I am hoping that someone can assist me with this since my XML knowledge is pretty much nil. It doesn't look like I can upload files to the forum here, so I am going to attempt to paste my code. I just need to get the "-" button to subtract a row. Thanks in advance for the assistance.
-Chris
<?xml version="1.0" encoding="UTF-8"?>
<?xfa generator="AdobeLiveCycleDesignerES_V8.2.1.4029.1.523496" APIVersion="2.8.9029.0"?>
<xdp:xdp xmlns:xdp="http://ns.adobe.com/xdp/" timeStamp="2010-06-28T16:04:04Z" uuid="081329f3-4914-4dde-87ae-75a83da8434e">
<template xmlns="http://www.xfa.org/schema/xfa-template/2.6/">
   <?formServer defaultPDFRenderFormat acrobat8.1static?>
   <subform name="form1" layout="tb" locale="en_US">
      <pageSet>
         <pageArea name="Page1" id="Page1">
            <contentArea x="19.05mm" y="12.7mm" w="190.5mm" h="266.7mm"/>
            <medium stock="default" short="612pt" long="792pt"/>
            <?templateDesigner expand 1?></pageArea>
         <?templateDesigner expand 1?></pageSet>
      <subform w="7.5in" h="10.5in" name="Page1">
         <subform w="174.625mm" y="79.377mm" name="Current_Objectives" layout="tb">
            <subform w="174.625mm" h="9.522mm" name="Objective">
               <field name="txt_currobj" minH="8.263mm" w="174.625mm">
                  <ui>
                     <textEdit multiLine="1">
                        <border>
                           <?templateDesigner StyleID aped3?>
                           <edge stroke="lowered"/>
                        </border>
                        <margin/>
                     </textEdit>
                  </ui>
                  <font size="11pt" typeface="Verdana"/>
                  <margin topInset="1mm" bottomInset="1mm" leftInset="1mm" rightInset="1mm"/>
                  <para vAlign="middle"/>
                  <caption reserve="7.76mm">
                     <para vAlign="middle"/>
                     <value>
                        <text>1.</text>
                     </value>
                     <font size="11pt" typeface="Verdana"/>
                  </caption>
                  <event activity="initialize" name="event__initialize">
                     <script contentType="application/x-javascript">this.caption.value.text.value = (this.parent.index + 1) + "."
</script>
                  </event>
               </field>
               <occur max="-1"/>
               <?templateDesigner expand 1?></subform>
            <field h="5.08mm" name="curr_obj_add_line" w="5.08mm">
               <ui>
                  <button highlight="push"/>
               </ui>
               <font typeface="Arial"/>
               <caption>
                  <value>
                     <text>+</text>
                  </value>
                  <para hAlign="center" vAlign="middle"/>
                  <font typeface="Arial"/>
               </caption>
               <border hand="right">
                  <edge stroke="raised"/>
                  <fill>
                     <color value="212, 208, 200"/>
                  </fill>
                  <?templateDesigner StyleID apbx2?></border>
               <bind match="none"/>
               <assist>
                  <toolTip>Add an item</toolTip>
               </assist>
               <event activity="click" name="event__click">
                  <script contentType="application/x-javascript">
_Objective.addInstance(1)
</script>
               </event>
            </field>
            <field h="5.08mm" name="curr_obj_del_line" w="5.08mm">
               <ui>
                  <button highlight="push"/>
               </ui>
               <font typeface="Arial"/>
               <caption>
                  <value>
                     <text>-</text>
                  </value>
                  <para hAlign="center" vAlign="middle"/>
                  <font typeface="Arial"/>
               </caption>
               <border hand="right">
                  <edge stroke="raised"/>
                  <fill>
                     <color value="212,208,200"/>
                  </fill>
                  <?templateDesigner StyleID apbx2?></border>
               <bind match="none"/>
               <assist>
                  <toolTip>Delete an item</toolTip>
               </assist>
               <event activity="click" name="event__click">
                  <script contentType="application/x-javascript">
_Objective.deleteInstance(1)
</script>
               </event>
            </field>
            <?templateDesigner expand 0?></subform>
         <?templateDesigner expand 1?></subform>
      <desc>
         <text name="version">8.2.1.4029.1.523496.503679</text>
      </desc>
      <?templateDesigner expand 1?></subform>
   <?templateDesigner DefaultLanguage FormCalc?>
   <?templateDesigner DefaultRunAt client?>
   <?acrobat JavaScript strictScoping?>
   <?templateDesigner Zoom 100?>
   <?templateDesigner Grid show:1, snap:1, units:0, color:ff8080, origin:(0,0), interval:(125000,125000)?>
   <?templateDesigner FormTargetVersion 26?>
   <?templateDesigner SaveTaggedPDF 1?>
   <?templateDesigner SavePDFWithEmbeddedFonts 1?>
   <?templateDesigner Rulers horizontal:1, vertical:1, guidelines:1, crosshairs:0?></template>
<config xmlns="http://www.xfa.org/schema/xci/2.6/">
   <agent name="designer">
      <destination>pdf</destination>
      <pdf>
         
         <fontInfo/>
      </pdf>
   </agent>
   <present>
      
      <pdf>
         
         <version>1.7</version>
         <adobeExtensionLevel>1</adobeExtensionLevel>
      </pdf>
      <common/>
      <script>
         <runScripts>server</runScripts>
      </script>
      <xdp>
         <packets>*</packets>
      </xdp>
   </present>
   <?originalXFAVersion http://www.xfa.org/schema/xci/2.8/?></config>
<localeSet xmlns="http://www.xfa.org/schema/xfa-locale-set/2.6/">
   <?originalXFAVersion http://www.xfa.org/schema/xfa-locale-set/2.6/?>
   <locale name="en_US" desc="English (United States)">
      <calendarSymbols name="gregorian">
         <monthNames>
            <month>January</month>
            <month>February</month>
            <month>March</month>
            <month>April</month>
            <month>May</month>
            <month>June</month>
            <month>July</month>
            <month>August</month>
            <month>September</month>
            <month>October</month>
            <month>November</month>
            <month>December</month>
         </monthNames>
         <monthNames abbr="1">
            <month>Jan</month>
            <month>Feb</month>
            <month>Mar</month>
            <month>Apr</month>
            <month>May</month>
            <month>Jun</month>
            <month>Jul</month>
            <month>Aug</month>
            <month>Sep</month>
            <month>Oct</month>
            <month>Nov</month>
            <month>Dec</month>
         </monthNames>
         <dayNames>
            <day>Sunday</day>
            <day>Monday</day>
            <day>Tuesday</day>
            <day>Wednesday</day>
            <day>Thursday</day>
            <day>Friday</day>
            <day>Saturday</day>
         </dayNames>
         <dayNames abbr="1">
            <day>Sun</day>
            <day>Mon</day>
            <day>Tue</day>
            <day>Wed</day>
            <day>Thu</day>
            <day>Fri</day>
            <day>Sat</day>
         </dayNames>
         <meridiemNames>
            <meridiem>AM</meridiem>
            <meridiem>PM</meridiem>
         </meridiemNames>
         <eraNames>
            <era>BC</era>
            <era>AD</era>
         </eraNames>
      </calendarSymbols>
      <datePatterns>
         <datePattern name="full">EEEE, MMMM D, YYYY</datePattern>
         <datePattern name="long">MMMM D, YYYY</datePattern>
         <datePattern name="med">MMM D, YYYY</datePattern>
         <datePattern name="short">M/D/YY</datePattern>
      </datePatterns>
      <timePatterns>
         <timePattern name="full">h:MM:SS A Z</timePattern>
         <timePattern name="long">h:MM:SS A Z</timePattern>
         <timePattern name="med">h:MM:SS A</timePattern>
         <timePattern name="short">h:MM A</timePattern>
      </timePatterns>
      <dateTimeSymbols>GyMdkHmsSEDFwWahKzZ</dateTimeSymbols>
      <numberPatterns>
         <numberPattern name="numeric">z,zz9.zzz</numberPattern>
         <numberPattern name="currency">$z,zz9.99|($z,zz9.99)</numberPattern>
         <numberPattern name="percent">z,zz9%</numberPattern>
      </numberPatterns>
      <numberSymbols>
         <numberSymbol name="decimal">.</numberSymbol>
         <numberSymbol name="grouping">,</numberSymbol>
         <numberSymbol name="percent">%</numberSymbol>
         <numberSymbol name="minus">-</numberSymbol>
         <numberSymbol name="zero">0</numberSymbol>
      </numberSymbols>
      <currencySymbols>
         <currencySymbol name="symbol">$</currencySymbol>
         <currencySymbol name="isoname">USD</currencySymbol>
         <currencySymbol name="decimal">.</currencySymbol>
      </currencySymbols>
      <typefaces>
         <typeface name="Myriad Pro"/>
         <typeface name="Minion Pro"/>
         <typeface name="Courier Std"/>
         <typeface name="Adobe Pi Std"/>
         <typeface name="Adobe Hebrew"/>
         <typeface name="Adobe Arabic"/>
         <typeface name="Adobe Thai"/>
         <typeface name="Kozuka Gothic Pro-VI M"/>
         <typeface name="Kozuka Mincho Pro-VI R"/>
         <typeface name="Adobe Ming Std L"/>
         <typeface name="Adobe Song Std L"/>
         <typeface name="Adobe Myungjo Std M"/>
      </typefaces>
   </locale>
</localeSet>
<x:xmpmeta xmlns:x="adobe:ns:meta/" x:xmptk="Adobe XMP Core 4.2.1-c041 52.337767, 2008/04/13-15:41:00        ">
   <rdf:RDF xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#">
      <rdf:Description xmlns:xmp="http://ns.adobe.com/xap/1.0/" rdf:about="">
         <xmp:MetadataDate>2010-06-28T16:04:04Z</xmp:MetadataDate>
         <xmp:CreatorTool>Adobe LiveCycle Designer ES 8.2</xmp:CreatorTool>
         <xmp:ModifyDate>2010-06-28T11:28:54-04:00</xmp:ModifyDate>
         <xmp:CreateDate>2010-06-18T11:45:23-04:00</xmp:CreateDate>
      </rdf:Description>
      <rdf:Description xmlns:pdf="http://ns.adobe.com/pdf/1.3/" rdf:about="">
         <pdf:Producer>Adobe LiveCycle Designer ES 8.2</pdf:Producer>
      </rdf:Description>
      <rdf:Description xmlns:xmpMM="http://ns.adobe.com/xap/1.0/mm/" rdf:about="">
         <xmpMM:DocumentID>uuid:081329f3-4914-4dde-87ae-75a83da8434e</xmpMM:DocumentID>
         <xmpMM:InstanceID>uuid:4d9ea5d0-fbf1-4be5-8aa5-b9c828a765e9</xmpMM:InstanceID>
      </rdf:Description>
      <rdf:Description xmlns:dc="http://purl.org/dc/elements/1.1/" rdf:about="">
         <dc:format>application/pdf</dc:format>
      </rdf:Description>
      <rdf:Description xmlns:desc="http://ns.adobe.com/xfa/promoted-desc/" rdf:about="">
         <desc:version rdf:parseType="Resource">
            <rdf:value>8.2.1.4029.1.523496.503679</rdf:value>
            <desc:ref>/template/subform[1]</desc:ref>
         </desc:version>
      </rdf:Description>
   </rdf:RDF>
</x:xmpmeta>
<xfdf xmlns="http://ns.adobe.com/xfdf/" xml:space="preserve">
   <annots/>
</xfdf></xdp:xdp>

Hi,
The (1) is incorrect for the removeInstance.
In the addInstance script the (1) is for "true" - merge the new instance with the data model.
In the removeInstance you need to specify which instance you want to remove.
So in your button the script would look think this:
var vCount = _Objective.count - 1;
_Objective.removeInstance(vCount);
This counts the number of instances and then subtracts 1, because the instances are zero based.
I have also added a button within the repeating instance, which allows the user to select the instance they want to remove.
_Objective.removeInstance(this.parent.index);
The this.parent.index is telling Acrobat that the instance to delete is the one that the button is in.
Form is here: https://acrobat.com/#d=nn2Ubo6tq5TDEcrtnz-SCg
Good luck,
Niall

HELP! I'm new at this and need some help getting started

I am currently working on our website and was wondering how do I make a new page?
for example.
I want people to click on a link on the homepage to say a stockist list and see another page open with that information on.
Also I need to know how to make the homepage have white strips on the left and right (for an example of what I mean please visit www.internationalrobes.com)
I look forward to your replies!
Carly

Well, these are more web design related questions, but I will help as much as I can in the context.
Going about adding a page:
1) Navigate to Admin > Layout > Static pages
2) Add a new static page here and enter your content
3) Once it is saved, you should see an eyeglasses icon next to the page and you can copy that url and use it in a link.
4) For example
<a href="common/pagedetail.aspx?PageCode=test">My link here</a>
As far as the white stripes, I think you mean centering a page?
1) Edit the main master page under your theme
2) Center the content using css, more info here: [http://www.thesitewizard.com/css/center-div-block.shtml]
I think you would also benefit from the WebEx i created on implementing a layout into Webtools available here: [http://www.businessoneecommerce.com/developerdownloads/Implementing_a_Webtools_Theme.zip]

Need some help getting iTunes installed

I already know that I have a problem installing iTunes and its during the "publishing product information" part of the installation. I got my hands on a Windows XP Home Edition disc . . . I attempted to do the installation repair . . . part way through it I was asked to give the "administrators password" . . . this I do not know. After the third wrong password I was told that I needed to reboot and start over. I am trying to avoid the re-installing windows b/c of all the factory crap that I have on this comptuer.
Is there anyone out there that can break this down to me big bird and barney style?? I have been on the phone waiting to talk to someone at compaq from more than 80 mins now!!
Thanks
Puck

hi puckusmc!
I attempted to do the installation repair . . . part way through it I was asked to give the "administrators password" . . . this I do not know.
okay, it sounds like you've already found the correct KB doc for the "vanishing installation" problem:
http://docs.info.apple.com/article.html?artnum=300361
... so you're on the right track.
what administrative rights do you have on that PC?
if you don't have administrative rights, can you contact the administrator to get them to do the install for you?
love, b

I need some help getting flash player 10.2

I need to have an older version of flash because my SiteGrinder web software doesn't work with flash 10.3. Can anyone please give me a version of 10.2 or a valid link where I could get a copy of it? I would appreciate it.
Thank you

I just installed Camino 2.0.7 and Flash Player 10.2.159.1 but the Sitegrinder page you posted appears to load proplerly. The Youtube video appears and plays as expected. Do you also encounter issues with playback on Youtube itself?

Need some help getting my system running again.

So the other day I decided to do a full system upgrade with pacman -Syu. It then asked me to exit X and reload the Nvidia drivers. Now, somehow switching to consoles got broken on my system (the ctrl+alt+F? key combination does nothing) so instead of exiting X I had to reboot. Something must have gone wrong with the kernel install because when I booted up I got a segmentation fault when trying to mount the local file system. Utilizing the fallback kernel didn't work, probably because I tried to install the kernel twice as the first time pacman gave me some errors. So then I booted up with the install CD and did a chroot back to my hard drive's root directory and tried to reinstall the kernel. What I ended up getting were a bunch of errors regarding line 60 of /lib/initcpio/functions. There was another line mentioned as well, line 132 or something like that, I can't remember exactly. After that I tried to reinstall mkinitcpio but I kept getting the same errors. Finally I just started removing every package I could find references to to reinstall later (which I'll admit was a rather irrational decision) and I apparently ended up removing something that pacman depends on so now I can't remove or install any packages (I really wish I actually knew what I was doing sometimes). Anyway I was wondering if any of you had any bright ideas as to how I can get my system up and running again without doing a clean install. I have a lot of stuff on there that I don't want to lose but I'm not sure where it all is so I'd have a tough time trying to back it up.

Misfit138 wrote:
jmetal88 wrote:It's a Honeywell manufactured for Tandy in the 386 era.
All I can say is "WOW".
You're probably as old as me.
Actually I'm 19. I just found it out in the garage one day while I was collecting parts for my system build.
EDIT: OK yeah, now I'm sure it's my keyboard that's the problem. I unplugged it and plugged it back in and the combinations worked for 3-4 minutes then stopped again.
EDIT 2: I just did some more experimentation and it turns out my alt keys don't work at all. Why it's only my alt keys and why it's both of them, I have no idea.
Last edited by jmetal88 (2007-12-11 03:54:41)

Need some help getting started with Mobility Services Engine

Someone has ordered several 3602 access points, a 5508 controller, and a MSE 3310 for one of our remote locations. The access points and controller are in place and are working fine (we use lightweight APs at many other locations), but I'm not sure how to approach the MSE. I've gone through the set up, and it's onsite, on the network, and I've added it to our WCS server. It's got a 2000 user context-aware services license. But I'm not sure where to go from here. It doesn't seem to actually be doing much of anything. Is there some quick start guide as to where to go from this point? The wireless users are mostly mini netbooks and iPads.

Well, I'm no expert, but I did spend the night...
Ok. In the WCS on the Services tab, Mobility Services, your MSE is recognized and reachable with matching SW Versions.
So, on the home tab, ContextAware tab, you see your MSE and it is showing Zero's for data in most if not all fields?
Back to the Services tab, Synchronize Services... is this empty?
The MSE can only 'SEE' what you tell it to 'LOOK' at. That is, buildings and floor areas. I haven't tried just a building.
Check the left hand box for all the floor areas of interest. Scroll to the bottom an slect 'Change MSE Assignment"
select which (of the many or the one) MSE you wish to have monitor the area. Check the 'CAS' box and save.
Up on the upper levt is a Synchronization block.. push the Synchronize button and sit back..
All MSE data is presented only to the WCS (or Pi).
Good Luck
David

Need some help getting my new Bower and Wikins mm-1 speakers on line

Hi I have the speaker system tied into my Mac 10.6.8 via USB, but nothing is happening,
Any ieas?
Thanks
Dan Page

Misfit138 wrote:
jmetal88 wrote:It's a Honeywell manufactured for Tandy in the 386 era.
All I can say is "WOW".
You're probably as old as me.
Actually I'm 19. I just found it out in the garage one day while I was collecting parts for my system build.
EDIT: OK yeah, now I'm sure it's my keyboard that's the problem. I unplugged it and plugged it back in and the combinations worked for 3-4 minutes then stopped again.
EDIT 2: I just did some more experimentation and it turns out my alt keys don't work at all. Why it's only my alt keys and why it's both of them, I have no idea.
Last edited by jmetal88 (2007-12-11 03:54:41)

Need some help getting started

This is my occi.c (test file)
#include <occi.h>
main()
printf("hoho");
Compile it
gcc -I /u01/app/oracle/product/10.1.0/db_1/rdbms/public/ occi.c -o occi
In file included from /u01/app/oracle/product/10.1.0/db_1/rdbms/public/occi.h:39,
from occi.c:1:
/u01/app/oracle/product/10.1.0/db_1/rdbms/public/occiCommon.h:125:18: string: No such file or directory
/u01/app/oracle/product/10.1.0/db_1/rdbms/public/occiCommon.h:129:18: vector: No such file or directory
/u01/app/oracle/product/10.1.0/db_1/rdbms/public/occiCommon.h:134:16: list: No such file or directory
In file included from /u01/app/oracle/product/10.1.0/db_1/rdbms/public/occi.h:39,
from occi.c:1:
/u01/app/oracle/product/10.1.0/db_1/rdbms/public/occiCommon.h:145: error: syntax error before "oracle"
/u01/app/oracle/product/10.1.0/db_1/rdbms/public/occiCommon.h:145: error: syntax error before '{' token
/u01/app/oracle/product/10.1.0/db_1/rdbms/public/occiCommon.h:272: warning: data definition has no type or storage class
/u01/app/oracle/product/10.1.0/db_1/rdbms/public/occiCommon.h:273: error: syntax error before "EnvironmentImpl"
/u01/app/oracle/product/10.1.0/db_1/rdbms/public/occiCommon.h:273: warning: data definition has no type or storage class
/u01/app/oracle/product/10.1.0/db_1/rdbms/public/occiCommon.h:274: error: syntax error before "Connection"
/u01/app/oracle/product/10.1.0/db_1/rdbms/public/occiCommon.h:274: warning: data definition has no type or storage class
/u01/app/oracle/product/10.1.0/db_1/rdbms/public/occiCommon.h:275: error: syntax error before "ConnectionImpl"
There is a lot more of the error messages.
What am I doing wrong? Or rather what is wrong? In this example I only include the header file and get lots of errors.
Message was edited by:
Marius

I think I found the mistake, at least it feels that I'm closer:
[oracle@akurei master]$ g++ -I/u01/app/oracle/product/10.1.0/db_1/rdbms/public/ -L/u01/app/oracle/product/10.1.0/db_1/lib -l occi10 occi.c -o occi
occi.c: In function `int main()':
occi.c:5: error: `Environment' undeclared (first use this function)
occi.c:5: error: (Each undeclared identifier is reported only once for each function it appears in.)
occi.c:5: error: `env' undeclared (first use this function)
occi.c:5: error: `Environment' has not been declared
occi.c:5: error: `createEnvironment' undeclared (first use this function)
occi.c:6: error: `Connection' undeclared (first use this function)
occi.c:6: error: `conn' undeclared (first use this function)
occi.c:9: error: `Statement' undeclared (first use this function)
occi.c:9: error: `stmt' undeclared (first use this function)
occi.c:32: error: `Environement' has not been declared
occi.c:32: error: `terminateEnvironment' undeclared (first use this function)
With this file:
#include <occi.h>
main()
Environment *env = Environment::createEnvironment();
Connection *conn = env->createConnection("marius","passord","orcl");
env->terminateConnection(conn);
Statement *stmt = conn->createStatement("INSERT INTO test(empno) VALUES(:1)");
int empno = 2;
stmt->setInt(1,empno);
stmt->executeUpdate();
Environement::terminateEnvironment(env);
I do not understand why environment is not declared. I though it should be as it is included through occi.h that include occiControl.h where it is declared.
Can anyone point me in the right direction.

Need some help-getting an error while installing

Hi all..
I am having a problem while installing Java applications via GPRS. The application's working fine when i download it from a remote site and install it on the emulator. But when i try downloading and installing it via GPRS on to a java enabled phone it gives me en error "Invalid Application". And on another phone tells me "Downloaded jar file are invalid"
Please give me your suggestions on how to solve this error.

Sound like a corrupted jad-file. Check if MIDP and CLDC version are set correctly and also take care that the jar-file does not exceed the filesize limitation of your phone.

Need some help getting my G5 "SCSI" compatible

Similar Messages

Maybe you are looking for