Need some help getting my iTunes over to my new Mabook pro

Hi:
I am trying to populate the iTunes application on my new laptop with my song from my G5 desk top. I failed trying to burn the songs to a DVD. I needed three dvd's to hold all my songs. The process failed on disk one. But it did totally fill the disk with something as the is now worthless. it is not recognized by iDVD.
Help need some ideas.
Thanks
Dan Page
Maui, Hawaii

Hi:
Thank you for the reply, most appreciated.
Did you burn as a data disc? Yes, I used iTunes "file/back up to disc".
Why are you using iDVD to import you music?
I had to use a DVD because I have many songs.
The only error I got was that the first of three DVD's was not usable. I did not burn the next two.
Thanks
Dan Page

Similar Messages

  • Need some help getting my G5 "SCSI" compatible

    Aloha:
    I need some help getting my G5 to work with my SCSI scanner.
    It has been suggested that I use an Adaptec PowerDomain 29160N to connect my Lacie SilverScanner III scanner, which is SCSI.
    http://www.adaptec.com/en-US/products/mac/scsi/APD-29160N/
    Does anyone have any experience with this unit or another SCSI adaptor that may be of help.
    I have a G5 using OS 10.4.8
    Any help would sure be of use!
    Thanks
    Dan Page
    Maui, Hawaii

    Dan Page-
    I've not used this card, but a quick scan of the web page says that it is compatible with Mac OSX 10.3.X. You may want to contact them to verify that it will work with your system.
    Luck-
    -DaddyPaycheck

  • Need some help with weird iTunes occurrence

    Hello all,
    First time poster here; it's rather lengthy but here goes. Four days ago I purchased some songs from iTunes; when I went to move them to a playlist, I noticed all my purchased music and my self-created playlists were gone. All of my purchased TV shows and podcasts were gone also. I also noticed some of my playlists were missing from my iPod. And no, I had not backed up my stuff...Stupid, I know. I hooked up my iPod to try to restore at least the purchased stuff and I rec'd a message saying my iPod is synced with another library; it did give me the option of transferring my purchased stuff from the iPod to iTunes. Everything transferred over except my purchased podcasts and music I had loaded from my CDs. It also didn't restore my playlists so I recreated the lists in iTunes then reconnected my iPod. The only option I now receive is the following message: "The iPod Mary Connell's iPod is synced with another iTunes library. Do you want to erase this iPod and sync with this iTunes library?"
    My questions:
    1. I have never connected my iPod to another computer or set up another library on my computer so I'm not sure what is going on. Can anybody provide an explanation? What should I do next? Is it possible there is another instance of iTunes on my computer? I'm not sure how since I never added one but I have heard of iTunes doing funky stuff on a Windows system.
    2. I read the instructions in the FAQs in another iTunes group re: how to transfer music files from the iPod to iTunes in Windows (I have a 30g video iPod and am using XP) Will I be able to restore my playlists and podcasts?
    3. I now have an external hard drive and the Roxio back up software. If I only want to back up my iTunes files at this point, what files am I looking for?
    I know that's a lot but I hope you guys can help! Thanks in advance and yes, I promise to do a back up ASAP!!!
    Mary
    dell dimension 3000   Windows XP  

    See if this helps--from The iTunes Help Page:
    Finding duplicate items
    You can search for items that have the same title and are by the same artist.
    To find duplicates:
    Select an item below Library or Playlists, and then choose View > Show Duplicates.
    To see all items again, click Show All at the bottom of the iTunes window.

  • Need some help getting iTunes installed

    I already know that I have a problem installing iTunes and its during the "publishing product information" part of the installation. I got my hands on a Windows XP Home Edition disc . . . I attempted to do the installation repair . . . part way through it I was asked to give the "administrators password" . . . this I do not know. After the third wrong password I was told that I needed to reboot and start over. I am trying to avoid the re-installing windows b/c of all the factory crap that I have on this comptuer.
    Is there anyone out there that can break this down to me big bird and barney style?? I have been on the phone waiting to talk to someone at compaq from more than 80 mins now!!
    Thanks
    Puck

    hi puckusmc!
    I attempted to do the installation repair . . . part way through it I was asked to give the "administrators password" . . . this I do not know.
    okay, it sounds like you've already found the correct KB doc for the "vanishing installation" problem:
    http://docs.info.apple.com/article.html?artnum=300361
    ... so you're on the right track.
    what administrative rights do you have on that PC?
    if you don't have administrative rights, can you contact the administrator to get them to do the install for you?
    love, b

  • Hello I have a few questions and I need some help with my iTunes and  iPod

    Hello iTunes people.
    I have a little problem with my iTunes. I actually almost know nothing about iTunes really. But I have had a 80 gig ipod .. ummm I think it's a iPod classic maybe. A long time ago I just downloaded iTunes. I think one of my tech friends already had put the program onto my PC so I did not even have to download it. Anyways I put my life's collection of mp3's onto iTunes and then syncs it with my iPod and it worked great. Here is my problem. I just recently bought a MONSTER PC. I have lovingly named it " ED209 " I downloaded iTunes for it and I have the most up to date version.8.1.1 is the most current version correct? Ok well here is my problem. What I want to do is I want to put everything that is currently on my iPod ONTO the iTunes library. I DO NOT want to import anything from the library or playlist or whatever you call it ONTO the iPod because there is nothing in the library. Now this is were its gets weird and possibly silly. A person I was chatting with on Facebook sort of made fun of me because she was like " Dude! Just push " Sync " But the reason I am paranoid is because THIS is the message I get....
    " The iPod " Aaron's iPod " is synced with another iTunes library. Do you want to erase this ipod and sync with this iTunes library? "
    HOLY COW!! That girl on Facebook was making fun of me but READ THAT. That exactly says ERASE the "iPod" and Sync with THIS library " It does not say put what is ON the iPod into THIS Library. It says it the other way around. Clear as day it says it will ERASE the " Ipod " it does not say " Fill the library with whats on your iPod "
    Do I all of a sudden not understand English or something???? I know how to freaking read and from what it says is sounds a 100 percent like " we will ERASE youe iPod and put everything from this playist or library onto your iPiod" But there is NOTHING in my library? Am I mentally challenged or what?
    I hope someone can help me here and I have another request. Could someone just tell me all the cool things I can do with iTunes and my iPod? I am trying to read the help files and the FAQ and whatever else Apple provides you with but it has SO MUCH crap that looks usless. I find myself reading a whole paragraph about some simple little section of s section of a section of a feature! Know what I mean. Someone give me the long and short of the neat things I can do with this stuff. I have windows Vista with a wicked computer that has like 6 gigs of ram and m iPod is a 80 GB Classic
    help !!
    PROTEUS

    *What I want to do is I want to put everything that is currently on my iPod ONTO the iTunes library.*
    1). Connect your iPod to your computer. When you get the message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod.
    2). When your iPod appears in the iTunes source list change the update setting to manual, that will let you continue to use your iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod and iPhone
    3). Once you are connected and your iPod is safely in manual mode there are a few things you can do to restore your iTunes from the iPod. iTunes will only let you copy your purchases directly from an iPod to the computer, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
    For everything else (music from CDs, other downloads and including iTunes purchases) there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. You can read reviews and comparisons of some of them here:
    Wired News - Rescue Your Stranded Tunes
    Comparison of iPod managers
    A selection of iPod to iTunes utilities:
    TuneJack Windows Only (iPhone and iPod Touch compatible)
    SharePod Windows Only (iPhone and iPod Touch compatible)
    iPod2PC Windows Only
    iDump Windows Only
    YamiPod Mac and Windows
    iPod Music Liberator Mac & Windows
    Floola Mac & Windows
    iPodRip Mac & Windows (iPhone and iPod Touch compatible)
    iPod Music Liberator Mac & Windows (iPhone and iPod Touch compatible)
    Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
    iGadget Mac & Windows (iPhone and iPod Touch compatible)
    iRepo Mac & Windows (iPhone and iPod Touch compatible)
    iPod Access Mac & Windows (iPhone and iPod Touch compatible)
    TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
    There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
    4). Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.
    5). I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay: Back up your iTunes library by copying to an external hard drive

  • Alright guys I need some help here with itunes and my music files

         Basically, I've had two apple accounts in the past like 4 years.  One day I connect my Ipod touch to my computer and downloaded an update from Itunes, not knowing that it erases all your content.  I didnt have my music files backed up either, so I ended up losing over $300 worth of music and apps.  Ever since then I never updated my touch, from the fear of losing my music.  Now that I have my own apple account, I have music files from the first account and my account.  My question is how can I back both of these groups of files up and update my ipod without losing any of this content!?  I would really appreciate a step by step process etc.  Thanks guys for helping me out!
    -Colin Wagner

    You can always redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    You can transfer iTunes purchases to your computer by:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer

  • Need some help getting my logic express 7 to work!

    alright so....i bought logic express 7 about 3 years ago and i HAVE NEVER USED IT! the reason being is because i could never get it to work and gave up 3 yrs ago. i just recently came across again while cleaning out my closet...i tried again but it still wont work...i think it says i need logic express 6 in order to get it work. is this true???? if so, where can i get logic express 6? i've searched everywhere and i can't seem to find it!
    can someone please help me out?? i don't want it to go to waste! please?
    thanx.
    -smitty

    sorry disregard...i just saw the sticker that says upgrade for express...idiot!

  • I need some help taking my site over the top.

    Ok, i built the site for a small business and i believe it looks better than most sites in the industry. How do i get it noticed in searches and take it over the top and make it look like it was done by a professional. How do i increase the search hits. Has a cottage industry spawned with people who do this in IWEB. i want to maintain control of the site.
    Your thoughts and direction
    john

    Rugbyjoey wrote:
    How do i get it noticed in searches...
    John ~ This article may help:
    _How to get your iWeb Websites into Google & Other Major Search Engines_
    Rugbyjoey wrote:
    ...and make it look like it was done by a professional.
    “Do only what is necessary to convey what is essential. Carefully eliminate elements that distract from the essential whole, elements that obstruct and obscure....Clutter, bulk, and erudition confuse perception and stifle comprehension, whereas simplicity allows clear and direct attention." — Richard Powell, in his book +Wabi Sabi Simple+.
    "One of the biggest mistakes typical business people make with documents is going out of their way to seemingly use every centimeter of space on a page, filling it up with text, boxes, clip art, charts, footers, etc. Space, often called "white space," is good. Embrace it. Use it. Often, the more space you don't use on a page, the clearer your message becomes.
    Empty space is beautiful, yes. But empty space also implies importance, elegance, professionalism. This is true with graphic design, but you can see the importance of space (both visual and physical) in the context of interior design. Think of the retail space, for example. Target is dedicated to design although they are a discounter. They know about space. Target stores are well designed. They have more empty space than other discounters, Walmart, for example."
    ...Understanding such basic points on graphic design will help set you apart. You can read more design tips in this Presentation Zen article:

  • [SOLVED] Need some help getting the sound to work again

    Recently I changed the motherboard and CPU to an AM3 platform, everything works with my previous setup except sound.
    Reinstalling alsa-utils and rebooting had absolutely no effect. Google didn't help either.
    lspci -v
    00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
    Subsystem: ASUSTeK Computer Inc. Device 8415
    Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
    Memory at dfff4000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel modules: snd-hda-intel
    The motherboard documentation refers to it as "VIA VTI708S".
    VLC complains about alsa-lib. Reinstalling it also didn't help.
    aplay /usr/share/sounds/alsa/Front_Center.wav
    ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
    ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
    ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
    ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
    ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
    ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
    ALSA lib conf.c:4633:(snd_config_expand) Evaluate error: No such file or directory
    ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM default
    aplay: main:654: audio open error: No such file or directory
    alsamixer
    cannot open mixer: No such file or directory
    Edit:
    Damn ASUS font... It's "VIA VT1708S" (number one, not the letter "i") !  Duh. No wonder Google couldn't find any info.
    Still, any ideas ? Or would you just rather let me squirm a little and diagnose the problem myself ?
    Last edited by DSpider (2010-11-28 18:15:41)

    sudo modprobe snd-hda-intel
    (I think it's what you tried to tell me, igndenok)
    Great. It took the bulk of my day trying to figure out how to get this thing to work.
    VolWheel is now set to adjust "Master Front" (it was previously set to "Master" with the old motherboard) and the Sonata volume bar apparently works too, just like I wanted (adjusting the PCM volume by default). Good. Great ! Now I just need to set the "snd-hda-intel" module to load at boot so I don't have to type "sudo modprobe snd-hda-intel" all the time and this thread can be considered SOLVED.
    sudo nano /etc/rc.conf
    ...and add the following:
    MODULES="... snd-hda-intel ..."
    (also removed snd-ac97-codec from the list because that's what the old mobo used)
    THANKS FOR ALL YOUR HELP !
    PS: Just out of curiosity, why is it called "snd-hda-intel" ? Why intel ? The CPU is AMD, the chipset is Nvidia nForce, sound is VIA...
    Anyone know ? I'll subscribe to this topic just in case anyone knows. Thanks again.
    Last edited by DSpider (2010-11-28 18:16:36)

  • Need some helping getting safari up

    OK a friend just got her Mac, the cable internet guy just spent 4 hours at her house trying to get her online. The moden is getting a signal, he doesn't knwo how to get the mac to acquire. I didn't have this issue when setting up mine, and I am not in front of my machine to walk her through it. Will she need to set up an account first, shouldn't she be able to see the cable network? On my machine I just plugged in the line and I was on the net in 3 seconds..????
    Can anyone walk me through this to help her get set-up,

    Network connection problems can be buggers.
    Go to the Network panel in System Preferences
    Click on the drop down menu next to Show> Select "network port configuration". Make sure her cable type (Ethernet or Airport) is selected. If it was unchecked, she found her problem. If checked:
    Have her open Safari. The page will say "cannot connect etc." with a box below for Network Configuration. Select it and see if the internal help function can make the connection work.
    Post back

  • New to sun/unix need some help getting my solaris express developers workin

    well it installed, detected my dvd but during the install process I was not asked any networking questions. I figured perhaps it meant I had to configure that after the fact but alas it says the network admin can't configure the network because the network auto-magic is configured. whatever that means...well I guess it means my ethernet was not found? also a right click screen resolution only gives my 50hz refresh rate and 640x480 so I am guessing that means my video card is not detected either? I have an asus 800se motherboard with built in graphics and ethernet so I guess I will need to get 2 pci cards?
    well if so I started to look at the very large hardware list and my head started spinning. so my question is...can anyone here suggest both an older video and ethernet card that I might say be able to find on ebay? because I really don't need anything fancy I am must out to learn sun...old but good and reliable???
    thank you.

    extendedping wrote:
    well it installed, detected my dvd but during the install process I was not asked any networking questions. I figured perhaps it meant I had to configure that after the fact but alas it says the network admin can't configure the network because the network auto-magic is configured. whatever that means...Please see the rest of the message on the network issue:
    Please see the nwamd(1M) manpage for more information on
    how to configure the system in this operational state.
    More information is also available at:
    http://www.opensolaris.org/os/project/nwam/phase0/
    Did you do a "man nwamd" to see the instructions on what you can do?
    -- Alan

  • Need some help getting add/remove field buttons working

    Someone here on the forums had previously assisted me with getting a button set up on a form that would add an additional text field to a form.  I now need a separate button created that will delete a text field in case too many were added.  I am hoping that someone can assist me with this since my XML knowledge is pretty much nil.  It doesn't look like I can upload files to the forum here, so I am going to attempt to paste my code.  I just need to get the "-" button to subtract a row.  Thanks in advance for the assistance.
    -Chris
    <?xml version="1.0" encoding="UTF-8"?>
    <?xfa generator="AdobeLiveCycleDesignerES_V8.2.1.4029.1.523496" APIVersion="2.8.9029.0"?>
    <xdp:xdp xmlns:xdp="http://ns.adobe.com/xdp/" timeStamp="2010-06-28T16:04:04Z" uuid="081329f3-4914-4dde-87ae-75a83da8434e">
    <template xmlns="http://www.xfa.org/schema/xfa-template/2.6/">
       <?formServer defaultPDFRenderFormat acrobat8.1static?>
       <subform name="form1" layout="tb" locale="en_US">
          <pageSet>
             <pageArea name="Page1" id="Page1">
                <contentArea x="19.05mm" y="12.7mm" w="190.5mm" h="266.7mm"/>
                <medium stock="default" short="612pt" long="792pt"/>
                <?templateDesigner expand 1?></pageArea>
             <?templateDesigner expand 1?></pageSet>
          <subform w="7.5in" h="10.5in" name="Page1">
             <subform w="174.625mm" y="79.377mm" name="Current_Objectives" layout="tb">
                <subform w="174.625mm" h="9.522mm" name="Objective">
                   <field name="txt_currobj" minH="8.263mm" w="174.625mm">
                      <ui>
                         <textEdit multiLine="1">
                            <border>
                               <?templateDesigner StyleID aped3?>
                               <edge stroke="lowered"/>
                            </border>
                            <margin/>
                         </textEdit>
                      </ui>
                      <font size="11pt" typeface="Verdana"/>
                      <margin topInset="1mm" bottomInset="1mm" leftInset="1mm" rightInset="1mm"/>
                      <para vAlign="middle"/>
                      <caption reserve="7.76mm">
                         <para vAlign="middle"/>
                         <value>
                            <text>1.</text>
                         </value>
                         <font size="11pt" typeface="Verdana"/>
                      </caption>
                      <event activity="initialize" name="event__initialize">
                         <script contentType="application/x-javascript">this.caption.value.text.value = (this.parent.index + 1) + "."
    </script>
                      </event>
                   </field>
                   <occur max="-1"/>
                   <?templateDesigner expand 1?></subform>
                <field h="5.08mm" name="curr_obj_add_line" w="5.08mm">
                   <ui>
                      <button highlight="push"/>
                   </ui>
                   <font typeface="Arial"/>
                   <caption>
                      <value>
                         <text>+</text>
                      </value>
                      <para hAlign="center" vAlign="middle"/>
                      <font typeface="Arial"/>
                   </caption>
                   <border hand="right">
                      <edge stroke="raised"/>
                      <fill>
                         <color value="212, 208, 200"/>
                      </fill>
                      <?templateDesigner StyleID apbx2?></border>
                   <bind match="none"/>
                   <assist>
                      <toolTip>Add an item</toolTip>
                   </assist>
                   <event activity="click" name="event__click">
                      <script contentType="application/x-javascript">
    _Objective.addInstance(1)
    </script>
                   </event>
                </field>
                <field h="5.08mm" name="curr_obj_del_line" w="5.08mm">
                   <ui>
                      <button highlight="push"/>
                   </ui>
                   <font typeface="Arial"/>
                   <caption>
                      <value>
                         <text>-</text>
                      </value>
                      <para hAlign="center" vAlign="middle"/>
                      <font typeface="Arial"/>
                   </caption>
                   <border hand="right">
                      <edge stroke="raised"/>
                      <fill>
                         <color value="212,208,200"/>
                      </fill>
                      <?templateDesigner StyleID apbx2?></border>
                   <bind match="none"/>
                   <assist>
                      <toolTip>Delete an item</toolTip>
                   </assist>
                   <event activity="click" name="event__click">
                      <script contentType="application/x-javascript">
    _Objective.deleteInstance(1)
    </script>
                   </event>
                </field>
                <?templateDesigner expand 0?></subform>
             <?templateDesigner expand 1?></subform>
          <desc>
             <text name="version">8.2.1.4029.1.523496.503679</text>
          </desc>
          <?templateDesigner expand 1?></subform>
       <?templateDesigner DefaultLanguage FormCalc?>
       <?templateDesigner DefaultRunAt client?>
       <?acrobat JavaScript strictScoping?>
       <?templateDesigner Zoom 100?>
       <?templateDesigner Grid show:1, snap:1, units:0, color:ff8080, origin:(0,0), interval:(125000,125000)?>
       <?templateDesigner FormTargetVersion 26?>
       <?templateDesigner SaveTaggedPDF 1?>
       <?templateDesigner SavePDFWithEmbeddedFonts 1?>
       <?templateDesigner Rulers horizontal:1, vertical:1, guidelines:1, crosshairs:0?></template>
    <config xmlns="http://www.xfa.org/schema/xci/2.6/">
       <agent name="designer">
          <destination>pdf</destination>
          <pdf>
             <!--  [0..n]  -->
             <fontInfo/>
          </pdf>
       </agent>
       <present>
          <!--  [0..n]  -->
          <pdf>
             <!--  [0..n]  -->
             <version>1.7</version>
             <adobeExtensionLevel>1</adobeExtensionLevel>
          </pdf>
          <common/>
          <script>
             <runScripts>server</runScripts>
          </script>
          <xdp>
             <packets>*</packets>
          </xdp>
       </present>
       <?originalXFAVersion http://www.xfa.org/schema/xci/2.8/?></config>
    <localeSet xmlns="http://www.xfa.org/schema/xfa-locale-set/2.6/">
       <?originalXFAVersion http://www.xfa.org/schema/xfa-locale-set/2.6/?>
       <locale name="en_US" desc="English (United States)">
          <calendarSymbols name="gregorian">
             <monthNames>
                <month>January</month>
                <month>February</month>
                <month>March</month>
                <month>April</month>
                <month>May</month>
                <month>June</month>
                <month>July</month>
                <month>August</month>
                <month>September</month>
                <month>October</month>
                <month>November</month>
                <month>December</month>
             </monthNames>
             <monthNames abbr="1">
                <month>Jan</month>
                <month>Feb</month>
                <month>Mar</month>
                <month>Apr</month>
                <month>May</month>
                <month>Jun</month>
                <month>Jul</month>
                <month>Aug</month>
                <month>Sep</month>
                <month>Oct</month>
                <month>Nov</month>
                <month>Dec</month>
             </monthNames>
             <dayNames>
                <day>Sunday</day>
                <day>Monday</day>
                <day>Tuesday</day>
                <day>Wednesday</day>
                <day>Thursday</day>
                <day>Friday</day>
                <day>Saturday</day>
             </dayNames>
             <dayNames abbr="1">
                <day>Sun</day>
                <day>Mon</day>
                <day>Tue</day>
                <day>Wed</day>
                <day>Thu</day>
                <day>Fri</day>
                <day>Sat</day>
             </dayNames>
             <meridiemNames>
                <meridiem>AM</meridiem>
                <meridiem>PM</meridiem>
             </meridiemNames>
             <eraNames>
                <era>BC</era>
                <era>AD</era>
             </eraNames>
          </calendarSymbols>
          <datePatterns>
             <datePattern name="full">EEEE, MMMM D, YYYY</datePattern>
             <datePattern name="long">MMMM D, YYYY</datePattern>
             <datePattern name="med">MMM D, YYYY</datePattern>
             <datePattern name="short">M/D/YY</datePattern>
          </datePatterns>
          <timePatterns>
             <timePattern name="full">h:MM:SS A Z</timePattern>
             <timePattern name="long">h:MM:SS A Z</timePattern>
             <timePattern name="med">h:MM:SS A</timePattern>
             <timePattern name="short">h:MM A</timePattern>
          </timePatterns>
          <dateTimeSymbols>GyMdkHmsSEDFwWahKzZ</dateTimeSymbols>
          <numberPatterns>
             <numberPattern name="numeric">z,zz9.zzz</numberPattern>
             <numberPattern name="currency">$z,zz9.99|($z,zz9.99)</numberPattern>
             <numberPattern name="percent">z,zz9%</numberPattern>
          </numberPatterns>
          <numberSymbols>
             <numberSymbol name="decimal">.</numberSymbol>
             <numberSymbol name="grouping">,</numberSymbol>
             <numberSymbol name="percent">%</numberSymbol>
             <numberSymbol name="minus">-</numberSymbol>
             <numberSymbol name="zero">0</numberSymbol>
          </numberSymbols>
          <currencySymbols>
             <currencySymbol name="symbol">$</currencySymbol>
             <currencySymbol name="isoname">USD</currencySymbol>
             <currencySymbol name="decimal">.</currencySymbol>
          </currencySymbols>
          <typefaces>
             <typeface name="Myriad Pro"/>
             <typeface name="Minion Pro"/>
             <typeface name="Courier Std"/>
             <typeface name="Adobe Pi Std"/>
             <typeface name="Adobe Hebrew"/>
             <typeface name="Adobe Arabic"/>
             <typeface name="Adobe Thai"/>
             <typeface name="Kozuka Gothic Pro-VI M"/>
             <typeface name="Kozuka Mincho Pro-VI R"/>
             <typeface name="Adobe Ming Std L"/>
             <typeface name="Adobe Song Std L"/>
             <typeface name="Adobe Myungjo Std M"/>
          </typefaces>
       </locale>
    </localeSet>
    <x:xmpmeta xmlns:x="adobe:ns:meta/" x:xmptk="Adobe XMP Core 4.2.1-c041 52.337767, 2008/04/13-15:41:00        ">
       <rdf:RDF xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#">
          <rdf:Description xmlns:xmp="http://ns.adobe.com/xap/1.0/" rdf:about="">
             <xmp:MetadataDate>2010-06-28T16:04:04Z</xmp:MetadataDate>
             <xmp:CreatorTool>Adobe LiveCycle Designer ES 8.2</xmp:CreatorTool>
             <xmp:ModifyDate>2010-06-28T11:28:54-04:00</xmp:ModifyDate>
             <xmp:CreateDate>2010-06-18T11:45:23-04:00</xmp:CreateDate>
          </rdf:Description>
          <rdf:Description xmlns:pdf="http://ns.adobe.com/pdf/1.3/" rdf:about="">
             <pdf:Producer>Adobe LiveCycle Designer ES 8.2</pdf:Producer>
          </rdf:Description>
          <rdf:Description xmlns:xmpMM="http://ns.adobe.com/xap/1.0/mm/" rdf:about="">
             <xmpMM:DocumentID>uuid:081329f3-4914-4dde-87ae-75a83da8434e</xmpMM:DocumentID>
             <xmpMM:InstanceID>uuid:4d9ea5d0-fbf1-4be5-8aa5-b9c828a765e9</xmpMM:InstanceID>
          </rdf:Description>
          <rdf:Description xmlns:dc="http://purl.org/dc/elements/1.1/" rdf:about="">
             <dc:format>application/pdf</dc:format>
          </rdf:Description>
          <rdf:Description xmlns:desc="http://ns.adobe.com/xfa/promoted-desc/" rdf:about="">
             <desc:version rdf:parseType="Resource">
                <rdf:value>8.2.1.4029.1.523496.503679</rdf:value>
                <desc:ref>/template/subform[1]</desc:ref>
             </desc:version>
          </rdf:Description>
       </rdf:RDF>
    </x:xmpmeta>
    <xfdf xmlns="http://ns.adobe.com/xfdf/" xml:space="preserve">
       <annots/>
    </xfdf></xdp:xdp>

    Hi,
    The (1) is incorrect for the removeInstance.
    In the addInstance script the (1) is for "true" - merge the new instance with the data model.
    In the removeInstance you need to specify which instance you want to remove.
    So in your button the script would look think this:
    var vCount = _Objective.count - 1;
    _Objective.removeInstance(vCount);
    This counts the number of instances and then subtracts 1, because the instances are zero based.
    I have also added a button within the repeating instance, which allows the user to select the instance they want to remove.
    _Objective.removeInstance(this.parent.index);
    The this.parent.index is telling Acrobat that the instance to delete is the one that the button is in.
    Form is here: https://acrobat.com/#d=nn2Ubo6tq5TDEcrtnz-SCg
    Good luck,
    Niall

  • Need some help! install itunes without sim card

    hello there, i`ve bought the Iphone 3GS 16gb, from england sealed, from a guy, he told me it runs on vodafone, the problem is i`m back in romania new, but i havent download the itunes yet, because i don`t have the vodafone uk sim card, and i tried with a romanian vodafone sim card but when i try to install the itunes it keeps telling me: The SIM card inserted in this iphone does not appear to be supported. why??? isnt the same network ??? how can i install the aplication without an an UK Vodafone sim card... ??

    You need the original Vodafone SIM. Vodafone UK does not offer unlocking according to http://support.apple.com/kb/HT1937 and your phone will not work with Vodafone Romania.

  • HELP! I'm new at this and need some help getting started

    I am currently working on our website and was wondering how do I make a new page?
    for example.
    I want people to click on a link on the homepage to say a stockist list and see another page open with that information on.
    Also I need to know how to make the homepage have white strips on the left and right (for an example of what I mean please visit www.internationalrobes.com)
    I look forward to your replies!
    Carly

    Well, these are more web design related questions, but I will help as much as I can in the context.
    Going about adding a page:
    1) Navigate to Admin > Layout > Static pages
    2) Add a new static page here and enter your content
    3) Once it is saved, you should see an eyeglasses icon next to the page and you can copy that url and use it in a link.
    4) For example
    <a href="common/pagedetail.aspx?PageCode=test">My link here</a>
    As far as the white stripes, I think you mean centering a page?
    1) Edit the main master page under your theme
    2) Center the content using css, more info here: [http://www.thesitewizard.com/css/center-div-block.shtml]
    I think you would also benefit from the WebEx i created on implementing a layout into Webtools available here: [http://www.businessoneecommerce.com/developerdownloads/Implementing_a_Webtools_Theme.zip]

  • I need some help getting flash player 10.2

    I need to have an older version of flash because my SiteGrinder web software doesn't work with flash 10.3. Can anyone please give me a version of 10.2 or a valid link where I could get a copy of it? I would appreciate it.
    Thank you

    I just installed Camino 2.0.7 and Flash Player 10.2.159.1 but the Sitegrinder page you posted appears to load proplerly.  The Youtube video appears and plays as expected.  Do you also encounter issues with playback on Youtube itself?

Maybe you are looking for