Need some help getting my new Bower and Wikins mm-1 speakers on line

Hi I have the speaker system tied into my Mac 10.6.8 via USB, but nothing is happening,
Any ieas?
Thanks
Dan Page

Misfit138 wrote:
jmetal88 wrote:It's a Honeywell manufactured for Tandy in the 386 era.
All I can say is "WOW".
You're probably as old as me.
Actually I'm 19. I just found it out in the garage one day while I was collecting parts for my system build.
EDIT: OK yeah, now I'm sure it's my keyboard that's the problem. I unplugged it and plugged it back in and the combinations worked for 3-4 minutes then stopped again.
EDIT 2: I just did some more experimentation and it turns out my alt keys don't work at all. Why it's only my alt keys and why it's both of them, I have no idea.
Last edited by jmetal88 (2007-12-11 03:54:41)

Similar Messages

TS2634 Please People I need some help.My iPod is disabled and when I connect it to iTunes it says: Itunes could not connect to the ipod because it is locked with a passcode...

Please People I need some help.My iPod is disabled and when I connect it to iTunes it says: Itunes could not connect to the ipod because it is locked with a passcode...how can I do it?

Place the iPod in Recovery mode and then restore.

Need some help getting my G5 "SCSI" compatible

Aloha:
I need some help getting my G5 to work with my SCSI scanner.
It has been suggested that I use an Adaptec PowerDomain 29160N to connect my Lacie SilverScanner III scanner, which is SCSI.
http://www.adaptec.com/en-US/products/mac/scsi/APD-29160N/
Does anyone have any experience with this unit or another SCSI adaptor that may be of help.
I have a G5 using OS 10.4.8
Any help would sure be of use!
Thanks
Dan Page
Maui, Hawaii

Dan Page-
I've not used this card, but a quick scan of the web page says that it is compatible with Mac OSX 10.3.X. You may want to contact them to verify that it will work with your system.
Luck-
-DaddyPaycheck

Need some help with a Macally enclosure and a spare internal drive

Need some help with a Macally enclousure
Posted: Oct 1, 2010 10:55 AM
Reply Email
Aloha:
I have a Macally PHR-S100SUA enclousure that does not recognise,my WD 1001fals hard drive. It has worked just fine with other internal drives, but not this one?
This is a spare internal drive that I am trying to make an external drive to store back ups for a lot of data. But so far I can not get it recognized by the computer. Maybe I need different drivers?
Any suggestions?
Dan Page

Hi-
Drivers aren't typically needed for external enclosures.
Macally has none listed for that enclosure.
The same is true for the WD drive, internal or external; no drivers.
With the exception of high end PM multi drive enclosures, I can't think of any that use drivers.
How is the external connected?
Have you tried different cables, different ports?
Bad/damaged cables are fairly common.
Have you verified connections inside of the enclosure?

Need some help getting my iTunes over to my new Mabook pro

Hi:
I am trying to populate the iTunes application on my new laptop with my song from my G5 desk top. I failed trying to burn the songs to a DVD. I needed three dvd's to hold all my songs. The process failed on disk one. But it did totally fill the disk with something as the is now worthless. it is not recognized by iDVD.
Help need some ideas.
Thanks
Dan Page
Maui, Hawaii

Hi:
Thank you for the reply, most appreciated.
Did you burn as a data disc? Yes, I used iTunes "file/back up to disc".
Why are you using iDVD to import you music?
I had to use a DVD because I have many songs.
The only error I got was that the first of three DVD's was not usable. I did not burn the next two.
Thanks
Dan Page

Need some help about Win 8.1 and linux with a dual boot

Hi!
I have a Lenovo z50-70 notebook and I have a Windows 8.1 on it. (The one which was shipped with this notebook...)
My concerns are Intalling Linux as a dual boot and loosing Windows 8.1.
As I am not familiar to Win 8.1, the product key is in the ?BIOS? and there's a lot of partitions...
If I install Linux Ubuntu (latest version) as a dual boot by manually making the partitions, etc. and then if I lose my Windows 8.1 system, how can I get it back?
I've made a backup of the system to the portable hdd but I don't know can I restore it, as I have no win installation disc and I am not sure if i can restore win 8.1 from the backup by using random win 8 installation disc that I've made from the downloaded ISO (for e.g. Win 8.1 pro iso from internet)...
I need a Linux distro for developing my Android ROM but I don't want to lose that Win 8.1 OS from my notebook. So.. What should I do?

Did you do a full disc backup of the C: Drive using a backup tool other than windows? If you did, then the recover of that partition will be up to your backup software.
If worse comes to worse, you can use the novo button to restore your computer to what it was like when it came from the factory. But there really is nothing to worry about. Create your new partition and just make sure that you install Linux to that partition. Make sure it is not the same size as any other partition, that way even if the Linux installer does not show the volume labels, you can tell which partition you want to install Linux in just by the size.
Hoov
Microsoft MVP - Consumer Security
SpywareHammer.com

Need some help getting my logic express 7 to work!

alright so....i bought logic express 7 about 3 years ago and i HAVE NEVER USED IT! the reason being is because i could never get it to work and gave up 3 yrs ago. i just recently came across again while cleaning out my closet...i tried again but it still wont work...i think it says i need logic express 6 in order to get it work. is this true???? if so, where can i get logic express 6? i've searched everywhere and i can't seem to find it!
can someone please help me out?? i don't want it to go to waste! please?
thanx.
-smitty

sorry disregard...i just saw the sticker that says upgrade for express...idiot!

I need some help with my new podcast. Please!

I've just set up a new podcast and it's online on itunes. The xml file is hosted on my website. Can i edit the text within this file...i.e. if there is a spelling mistake...ping this...and itunes will update it? Cos i tried doing that but no changes were made...any ideas?
Also, to generate my xml file, i used this website
http://www.podcastblaster.com/podcast-feed/index.php
However i noticed that feedburner allows you to collate statistics on subscribers and podcast downloads....how can i switch to feedburner? i find this all so confusing. does anyone know what im talking about?

From looking at their site, Podblaster creates the feed file from the data you give it: so it's no good you editing the feed file yourself as Podblaster will over-write it the next time you add an episode. Any changes you make to data or episode in Podblaster will cause an amended version of the feed file to be uploaded and this will eventually be reflected in the itunes Store; it usually takes 1-2 days, occasionally longer, for new episodes to appear in the Store, and it's possible that minor amendments to the texts won't show until you upload a new episode.
To take advantage of Feedburner's statistics facilities you need to submit the feed to Feedburner, and then submit the feed it generates to the iTunes Store. This will involve you either using the procedure detailed here (which involves adding a special tag to the feed - something you may well not be able to do) or submitting this feed as a new podcast to the Store (which will necessitate making a small change to the name).
If you have any further queries please post both the URL of your feed and of the iTunes Store page (please include the http:// in both cases), without which it's possible only to give very general answers.

Need some help getting my system running again.

So the other day I decided to do a full system upgrade with pacman -Syu. It then asked me to exit X and reload the Nvidia drivers. Now, somehow switching to consoles got broken on my system (the ctrl+alt+F? key combination does nothing) so instead of exiting X I had to reboot. Something must have gone wrong with the kernel install because when I booted up I got a segmentation fault when trying to mount the local file system. Utilizing the fallback kernel didn't work, probably because I tried to install the kernel twice as the first time pacman gave me some errors. So then I booted up with the install CD and did a chroot back to my hard drive's root directory and tried to reinstall the kernel. What I ended up getting were a bunch of errors regarding line 60 of /lib/initcpio/functions. There was another line mentioned as well, line 132 or something like that, I can't remember exactly. After that I tried to reinstall mkinitcpio but I kept getting the same errors. Finally I just started removing every package I could find references to to reinstall later (which I'll admit was a rather irrational decision) and I apparently ended up removing something that pacman depends on so now I can't remove or install any packages (I really wish I actually knew what I was doing sometimes). Anyway I was wondering if any of you had any bright ideas as to how I can get my system up and running again without doing a clean install. I have a lot of stuff on there that I don't want to lose but I'm not sure where it all is so I'd have a tough time trying to back it up.

Misfit138 wrote:
jmetal88 wrote:It's a Honeywell manufactured for Tandy in the 386 era.
All I can say is "WOW".
You're probably as old as me.
Actually I'm 19. I just found it out in the garage one day while I was collecting parts for my system build.
EDIT: OK yeah, now I'm sure it's my keyboard that's the problem. I unplugged it and plugged it back in and the combinations worked for 3-4 minutes then stopped again.
EDIT 2: I just did some more experimentation and it turns out my alt keys don't work at all. Why it's only my alt keys and why it's both of them, I have no idea.
Last edited by jmetal88 (2007-12-11 03:54:41)

HELP! I'm new at this and need some help getting started

I am currently working on our website and was wondering how do I make a new page?
for example.
I want people to click on a link on the homepage to say a stockist list and see another page open with that information on.
Also I need to know how to make the homepage have white strips on the left and right (for an example of what I mean please visit www.internationalrobes.com)
I look forward to your replies!
Carly

Well, these are more web design related questions, but I will help as much as I can in the context.
Going about adding a page:
1) Navigate to Admin > Layout > Static pages
2) Add a new static page here and enter your content
3) Once it is saved, you should see an eyeglasses icon next to the page and you can copy that url and use it in a link.
4) For example
<a href="common/pagedetail.aspx?PageCode=test">My link here</a>
As far as the white stripes, I think you mean centering a page?
1) Edit the main master page under your theme
2) Center the content using css, more info here: [http://www.thesitewizard.com/css/center-div-block.shtml]
I think you would also benefit from the WebEx i created on implementing a layout into Webtools available here: [http://www.businessoneecommerce.com/developerdownloads/Implementing_a_Webtools_Theme.zip]

New to sun/unix need some help getting my solaris express developers workin

well it installed, detected my dvd but during the install process I was not asked any networking questions. I figured perhaps it meant I had to configure that after the fact but alas it says the network admin can't configure the network because the network auto-magic is configured. whatever that means...well I guess it means my ethernet was not found? also a right click screen resolution only gives my 50hz refresh rate and 640x480 so I am guessing that means my video card is not detected either? I have an asus 800se motherboard with built in graphics and ethernet so I guess I will need to get 2 pci cards?
well if so I started to look at the very large hardware list and my head started spinning. so my question is...can anyone here suggest both an older video and ethernet card that I might say be able to find on ebay? because I really don't need anything fancy I am must out to learn sun...old but good and reliable???
thank you.

extendedping wrote:
well it installed, detected my dvd but during the install process I was not asked any networking questions. I figured perhaps it meant I had to configure that after the fact but alas it says the network admin can't configure the network because the network auto-magic is configured. whatever that means...Please see the rest of the message on the network issue:
Please see the nwamd(1M) manpage for more information on
how to configure the system in this operational state.
More information is also available at:
http://www.opensolaris.org/os/project/nwam/phase0/
Did you do a "man nwamd" to see the instructions on what you can do?
-- Alan

Need some Help with the new Genius Mixes on iTunes 9

I would like to know how to use the New Genius Mixes on iTunes 9. I don't quit know how to use it yet and like all of us we're all just learning how to use the Genius Mixes. I did watch the KeyNote but they didn't go into great detail on how to use it. Does Apple have a web site that has more detail instruction on how to use the genius Mixes? I did find some info. on how to use the Genius mixes but it didn't go into great detail on how or what to do with the genius Mixex and thats what I need.
when I click on the genius Mixes icon under the "Genius", what shows up is a Big square with four album images of my music that I have in my music collection, I go and roll my mouse over the Big square with my four music albums and click on it to play the music and it'll play what ever I have in the Genius Mix list plus as I roll my mouse over the Big Square, under it it says "Jazz Mix" with some text writings under the Jazz mix.
I want to change the Jazz mix Title and I want to know how to add more music square boxes to my Genius Mixes just like they show in the Keynote and I would like to edit and create my own four square music boxes in my Genius Mixes.
I never used my music genius list, I always created just a play List, now I am just learning how to use this music Genius lists and I don't know how to use it at all and I need someone that knows how to use thr Genius Mixes list to help me how to use it since there isn't a how to book yet for the new iTunes 9.
Can someone Please help me with the new genius Mixes on iTunes.
Thank you,
Mrs Trisha Foster

Today, I was getting an array out of bounds exception on a split
I don't see how that could happen with the 'split' method since it creates its own array.
For this particular string, ordSplit.length = 24 and commas = 26.
PERFECT! That is exactly what it should be!
Look closely at the end of the sample string you posted and you will see that it has trailing empty strings at the end: '1096200000000242505,,,'
Then if you read the Javadocs for the 'split' method you will find that those will NOT be included in the resulting array:
http://docs.oracle.com/javase/6/docs/api/java/lang/String.html#split(java.lang.String)
split
public String[] split(String regex)
Splits this string around matches of the given regular expression. This method works as if by invoking the two-argument split method with the given expression and a limit argument of zero. Trailing empty strings are therefore not included in the resulting array.
Just a hunch but your 'out of bounds exception' is likely due to your code assuming that there will be 26 entries in the array and there are really only 24.

Poor student in desperate need of help getting my Adam 4017 and 18 units functioning!!

Thought I was getting a great deal. Like the loggers. Have them hooked up but I can not link to any program. Grant it I am a novice when it comes to these things. Im a microbiologist looking for bacteria that makes electric not a programmer.
I need the most cost effective way to record data off of these loggers. Im supposesd to begin a project on friday. Dasylab? Anything. If I can just collect the numbers in a folder I can process.
Please help.
Thanks

DASYLab 13 includes an ADAM module that should work with those units.
You do need to ensure that they are configured correctly, and have unique unit ids, and that they are wired correctly. Documentation should be available on the Advantech site.
You can download the DASYLab 13 evaluation from www.dasylab.com. Choose the Evaluation mode, and select the ADAM driver under the Data Acquisition packages.
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

Need some help getting add/remove field buttons working

Someone here on the forums had previously assisted me with getting a button set up on a form that would add an additional text field to a form. I now need a separate button created that will delete a text field in case too many were added. I am hoping that someone can assist me with this since my XML knowledge is pretty much nil. It doesn't look like I can upload files to the forum here, so I am going to attempt to paste my code. I just need to get the "-" button to subtract a row. Thanks in advance for the assistance.
-Chris
<?xml version="1.0" encoding="UTF-8"?>
<?xfa generator="AdobeLiveCycleDesignerES_V8.2.1.4029.1.523496" APIVersion="2.8.9029.0"?>
<xdp:xdp xmlns:xdp="http://ns.adobe.com/xdp/" timeStamp="2010-06-28T16:04:04Z" uuid="081329f3-4914-4dde-87ae-75a83da8434e">
<template xmlns="http://www.xfa.org/schema/xfa-template/2.6/">
   <?formServer defaultPDFRenderFormat acrobat8.1static?>
   <subform name="form1" layout="tb" locale="en_US">
      <pageSet>
         <pageArea name="Page1" id="Page1">
            <contentArea x="19.05mm" y="12.7mm" w="190.5mm" h="266.7mm"/>
            <medium stock="default" short="612pt" long="792pt"/>
            <?templateDesigner expand 1?></pageArea>
         <?templateDesigner expand 1?></pageSet>
      <subform w="7.5in" h="10.5in" name="Page1">
         <subform w="174.625mm" y="79.377mm" name="Current_Objectives" layout="tb">
            <subform w="174.625mm" h="9.522mm" name="Objective">
               <field name="txt_currobj" minH="8.263mm" w="174.625mm">
                  <ui>
                     <textEdit multiLine="1">
                        <border>
                           <?templateDesigner StyleID aped3?>
                           <edge stroke="lowered"/>
                        </border>
                        <margin/>
                     </textEdit>
                  </ui>
                  <font size="11pt" typeface="Verdana"/>
                  <margin topInset="1mm" bottomInset="1mm" leftInset="1mm" rightInset="1mm"/>
                  <para vAlign="middle"/>
                  <caption reserve="7.76mm">
                     <para vAlign="middle"/>
                     <value>
                        <text>1.</text>
                     </value>
                     <font size="11pt" typeface="Verdana"/>
                  </caption>
                  <event activity="initialize" name="event__initialize">
                     <script contentType="application/x-javascript">this.caption.value.text.value = (this.parent.index + 1) + "."
</script>
                  </event>
               </field>
               <occur max="-1"/>
               <?templateDesigner expand 1?></subform>
            <field h="5.08mm" name="curr_obj_add_line" w="5.08mm">
               <ui>
                  <button highlight="push"/>
               </ui>
               <font typeface="Arial"/>
               <caption>
                  <value>
                     <text>+</text>
                  </value>
                  <para hAlign="center" vAlign="middle"/>
                  <font typeface="Arial"/>
               </caption>
               <border hand="right">
                  <edge stroke="raised"/>
                  <fill>
                     <color value="212, 208, 200"/>
                  </fill>
                  <?templateDesigner StyleID apbx2?></border>
               <bind match="none"/>
               <assist>
                  <toolTip>Add an item</toolTip>
               </assist>
               <event activity="click" name="event__click">
                  <script contentType="application/x-javascript">
_Objective.addInstance(1)
</script>
               </event>
            </field>
            <field h="5.08mm" name="curr_obj_del_line" w="5.08mm">
               <ui>
                  <button highlight="push"/>
               </ui>
               <font typeface="Arial"/>
               <caption>
                  <value>
                     <text>-</text>
                  </value>
                  <para hAlign="center" vAlign="middle"/>
                  <font typeface="Arial"/>
               </caption>
               <border hand="right">
                  <edge stroke="raised"/>
                  <fill>
                     <color value="212,208,200"/>
                  </fill>
                  <?templateDesigner StyleID apbx2?></border>
               <bind match="none"/>
               <assist>
                  <toolTip>Delete an item</toolTip>
               </assist>
               <event activity="click" name="event__click">
                  <script contentType="application/x-javascript">
_Objective.deleteInstance(1)
</script>
               </event>
            </field>
            <?templateDesigner expand 0?></subform>
         <?templateDesigner expand 1?></subform>
      <desc>
         <text name="version">8.2.1.4029.1.523496.503679</text>
      </desc>
      <?templateDesigner expand 1?></subform>
   <?templateDesigner DefaultLanguage FormCalc?>
   <?templateDesigner DefaultRunAt client?>
   <?acrobat JavaScript strictScoping?>
   <?templateDesigner Zoom 100?>
   <?templateDesigner Grid show:1, snap:1, units:0, color:ff8080, origin:(0,0), interval:(125000,125000)?>
   <?templateDesigner FormTargetVersion 26?>
   <?templateDesigner SaveTaggedPDF 1?>
   <?templateDesigner SavePDFWithEmbeddedFonts 1?>
   <?templateDesigner Rulers horizontal:1, vertical:1, guidelines:1, crosshairs:0?></template>
<config xmlns="http://www.xfa.org/schema/xci/2.6/">
   <agent name="designer">
      <destination>pdf</destination>
      <pdf>
         
         <fontInfo/>
      </pdf>
   </agent>
   <present>
      
      <pdf>
         
         <version>1.7</version>
         <adobeExtensionLevel>1</adobeExtensionLevel>
      </pdf>
      <common/>
      <script>
         <runScripts>server</runScripts>
      </script>
      <xdp>
         <packets>*</packets>
      </xdp>
   </present>
   <?originalXFAVersion http://www.xfa.org/schema/xci/2.8/?></config>
<localeSet xmlns="http://www.xfa.org/schema/xfa-locale-set/2.6/">
   <?originalXFAVersion http://www.xfa.org/schema/xfa-locale-set/2.6/?>
   <locale name="en_US" desc="English (United States)">
      <calendarSymbols name="gregorian">
         <monthNames>
            <month>January</month>
            <month>February</month>
            <month>March</month>
            <month>April</month>
            <month>May</month>
            <month>June</month>
            <month>July</month>
            <month>August</month>
            <month>September</month>
            <month>October</month>
            <month>November</month>
            <month>December</month>
         </monthNames>
         <monthNames abbr="1">
            <month>Jan</month>
            <month>Feb</month>
            <month>Mar</month>
            <month>Apr</month>
            <month>May</month>
            <month>Jun</month>
            <month>Jul</month>
            <month>Aug</month>
            <month>Sep</month>
            <month>Oct</month>
            <month>Nov</month>
            <month>Dec</month>
         </monthNames>
         <dayNames>
            <day>Sunday</day>
            <day>Monday</day>
            <day>Tuesday</day>
            <day>Wednesday</day>
            <day>Thursday</day>
            <day>Friday</day>
            <day>Saturday</day>
         </dayNames>
         <dayNames abbr="1">
            <day>Sun</day>
            <day>Mon</day>
            <day>Tue</day>
            <day>Wed</day>
            <day>Thu</day>
            <day>Fri</day>
            <day>Sat</day>
         </dayNames>
         <meridiemNames>
            <meridiem>AM</meridiem>
            <meridiem>PM</meridiem>
         </meridiemNames>
         <eraNames>
            <era>BC</era>
            <era>AD</era>
         </eraNames>
      </calendarSymbols>
      <datePatterns>
         <datePattern name="full">EEEE, MMMM D, YYYY</datePattern>
         <datePattern name="long">MMMM D, YYYY</datePattern>
         <datePattern name="med">MMM D, YYYY</datePattern>
         <datePattern name="short">M/D/YY</datePattern>
      </datePatterns>
      <timePatterns>
         <timePattern name="full">h:MM:SS A Z</timePattern>
         <timePattern name="long">h:MM:SS A Z</timePattern>
         <timePattern name="med">h:MM:SS A</timePattern>
         <timePattern name="short">h:MM A</timePattern>
      </timePatterns>
      <dateTimeSymbols>GyMdkHmsSEDFwWahKzZ</dateTimeSymbols>
      <numberPatterns>
         <numberPattern name="numeric">z,zz9.zzz</numberPattern>
         <numberPattern name="currency">$z,zz9.99|($z,zz9.99)</numberPattern>
         <numberPattern name="percent">z,zz9%</numberPattern>
      </numberPatterns>
      <numberSymbols>
         <numberSymbol name="decimal">.</numberSymbol>
         <numberSymbol name="grouping">,</numberSymbol>
         <numberSymbol name="percent">%</numberSymbol>
         <numberSymbol name="minus">-</numberSymbol>
         <numberSymbol name="zero">0</numberSymbol>
      </numberSymbols>
      <currencySymbols>
         <currencySymbol name="symbol">$</currencySymbol>
         <currencySymbol name="isoname">USD</currencySymbol>
         <currencySymbol name="decimal">.</currencySymbol>
      </currencySymbols>
      <typefaces>
         <typeface name="Myriad Pro"/>
         <typeface name="Minion Pro"/>
         <typeface name="Courier Std"/>
         <typeface name="Adobe Pi Std"/>
         <typeface name="Adobe Hebrew"/>
         <typeface name="Adobe Arabic"/>
         <typeface name="Adobe Thai"/>
         <typeface name="Kozuka Gothic Pro-VI M"/>
         <typeface name="Kozuka Mincho Pro-VI R"/>
         <typeface name="Adobe Ming Std L"/>
         <typeface name="Adobe Song Std L"/>
         <typeface name="Adobe Myungjo Std M"/>
      </typefaces>
   </locale>
</localeSet>
<x:xmpmeta xmlns:x="adobe:ns:meta/" x:xmptk="Adobe XMP Core 4.2.1-c041 52.337767, 2008/04/13-15:41:00        ">
   <rdf:RDF xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#">
      <rdf:Description xmlns:xmp="http://ns.adobe.com/xap/1.0/" rdf:about="">
         <xmp:MetadataDate>2010-06-28T16:04:04Z</xmp:MetadataDate>
         <xmp:CreatorTool>Adobe LiveCycle Designer ES 8.2</xmp:CreatorTool>
         <xmp:ModifyDate>2010-06-28T11:28:54-04:00</xmp:ModifyDate>
         <xmp:CreateDate>2010-06-18T11:45:23-04:00</xmp:CreateDate>
      </rdf:Description>
      <rdf:Description xmlns:pdf="http://ns.adobe.com/pdf/1.3/" rdf:about="">
         <pdf:Producer>Adobe LiveCycle Designer ES 8.2</pdf:Producer>
      </rdf:Description>
      <rdf:Description xmlns:xmpMM="http://ns.adobe.com/xap/1.0/mm/" rdf:about="">
         <xmpMM:DocumentID>uuid:081329f3-4914-4dde-87ae-75a83da8434e</xmpMM:DocumentID>
         <xmpMM:InstanceID>uuid:4d9ea5d0-fbf1-4be5-8aa5-b9c828a765e9</xmpMM:InstanceID>
      </rdf:Description>
      <rdf:Description xmlns:dc="http://purl.org/dc/elements/1.1/" rdf:about="">
         <dc:format>application/pdf</dc:format>
      </rdf:Description>
      <rdf:Description xmlns:desc="http://ns.adobe.com/xfa/promoted-desc/" rdf:about="">
         <desc:version rdf:parseType="Resource">
            <rdf:value>8.2.1.4029.1.523496.503679</rdf:value>
            <desc:ref>/template/subform[1]</desc:ref>
         </desc:version>
      </rdf:Description>
   </rdf:RDF>
</x:xmpmeta>
<xfdf xmlns="http://ns.adobe.com/xfdf/" xml:space="preserve">
   <annots/>
</xfdf></xdp:xdp>

Hi,
The (1) is incorrect for the removeInstance.
In the addInstance script the (1) is for "true" - merge the new instance with the data model.
In the removeInstance you need to specify which instance you want to remove.
So in your button the script would look think this:
var vCount = _Objective.count - 1;
_Objective.removeInstance(vCount);
This counts the number of instances and then subtracts 1, because the instances are zero based.
I have also added a button within the repeating instance, which allows the user to select the instance they want to remove.
_Objective.removeInstance(this.parent.index);
The this.parent.index is telling Acrobat that the instance to delete is the one that the button is in.
Form is here: https://acrobat.com/#d=nn2Ubo6tq5TDEcrtnz-SCg
Good luck,
Niall

Need some help regarding Client Proxy generation and test via SOAMANAGER

Hello,
we are integrating a 3rd party Java client via webservices.
For that matter I generated a client proxy (consumer proxy) in se80 using the existing WSDL.
This worked fine.
The I wanted to create a logical port.
Since this is only possible in SOAMANAGER I tried it there.
Trying to do this automatically by the given WSDL file didn't work. The system dumps.
So, I tried the manual approach by entering the server name and path in the 'Transport settings' tab.
Now I wanted to test this.
Unfortunately the test function in se80 (Proxy->Test) doesn't show a positive result.
I always get an error
SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response:
ICM_HTTP_CONNECTION_FAILED")
So, I am kind of stuck here.
Do you guys have any idea what's wrong (approach, settings, bugs)?.
I tested the webservices with a test application (soapUI), and they work fine.
So it seems to be a problem in the proxy framework or a network problem?
I really appreciate any kind of help.
Thanks,
Michael

i created the port in soamanager.Do i need to create in lpconfig also?
yes i have loaded the certificate in strust.
i am getting the response also from the web service. as Security requirements are not satisfied because the security header is not present in the incoming message.
i need to pass the user name and password while using the method.wsse security.wld u have any clue?

Need some help getting my new Bower and Wikins mm-1 speakers on line

Similar Messages

Maybe you are looking for