Need some help in finding a specific stroke weight...

My preflight program is flagging illustrations with less than a .2 stroke weight and finding these instances can be a reall bugger. The preflight will give the >.2 value so I tried going back to the illustration and creating a line with the offending pt value and selecting same stroke weight but it won't select them. Once I have manually found the small stroke weight I've compared the two strokes for any differences but it won't select even when the color is the same and stroke=default appearance. Once I select the original line and do the select same stroke than it finds the other instances just fine. Anyone know whats going on? I'm using Illustration CS4 and the files are all .ai.
Any help would be much appreciated!

For anyone looking at thread I found a quick solution on the forum...
17. Jan 6, 2009 10:26 AM in response to: (Alesclandre)
Re: Thousands of paths take a huge time to treat !
> So what I wanted to do is to force all the paths that were thinner than 0.25 to 0.25. I think I can't do it inside Illustrator. But maybe I'm wrong ? 1. Line Tool: Draw a line. Give it a stroke of .01 pt.
2. Magic Wand Palette: Set Stroke Weight Tolerance to ".24 pt"
3. Magic Wand Tool: Click the line you drew in step 1. Paths with stroke weight of .25 pt or less should be selected. JET

Similar Messages

I need some help with finder

ok so i was clearing my mac to give back to my school at the end of the year.... i know a little early but still..... and well i messed up.
my mac was locked so i couldnt find the system files and core files and stuff..... but i cracked that right opan and got them and so i found the app finder in the system file for coreservices right and well i changed the finder image and i wanted to change it back.... so i moved the finder app to the desktop and well this is when it started. everything was ok untill i clicked on the desktop in the sidebar of finder.... well i think it crashed and now when i click on finder it says "The application can't be found" and well yeh im F#$@ ..... i cant opan finder,, i cant opan any files, i was lucky i could still opan the internet browser.
so anyway if anyone could help me that would be nice.... BTW i cant do anything to criticle like dump the hard drive and start over... because this is a school (Government) laptop and well i just cant do something like that. so if anyone can help still plz do i would relly like it

well yes thats exaxcly what has happaned... i blantantly moved it out of coreservices and onto the desktop.
but if it was still on my desktop then i would have put it back... (im not that stupid) so that isnt very helpfull .... when i moved it to the desktop and i clicked out of the coreservices file every file on my desktop disapered and i cant opan finder and when i go to opan a file this error code comes up
"the application finder can't be opaned
-10810"
what this means i dont know.
any idears that are simple???? if not then i wont waste anyones time here and ill go as noondaywitch said "fessing up to your IT dept." so yeh
thanks to both of you so far who have replyed

Need to try to find Pi, need some help

I have need to try to find some of the values of Pi,
but when i try math.PI i only get down to like 8 decimals.
I need some help.
Not sure were to start either!
Message was edited by:
Aten

You're just adding terms together. There's a series of them, so you need a loop. Each pass through the loop could add one more term. Note that each term has a denominator that is bigger by 2, and it's either added or subtracted (or to look at it another way, you're adding negatives alternately).
The main issue is how accurate you want it to be. You can't add the digits together forever. So you have to choose a stopping point. You can stop based on a time period (when you've run out of time, stop adding new terms) or on precision (when two subsequent values are close enough to each other, stop).
You'll probably want to use java.math.BigDecimal.
If you give some more details about the assignment I can make some more suggestions.
Why don't you give it a try and see how it works?

I need some help. im getting error -69 when trying to sync my ipod. i dont kno what to do. ive tried googling as much info as i can on this but i cant seem to find a answer to get me off to a good starting point. i back all my music up on a hard drive.

i need some help. im getting error -69 when trying to sync my ipod. i dont kno what to do. ive tried googling as much info as i can on this subject but i cant seem to find a answer to get me off to a good starting point. i back all my music up on a external hard drive.

If the file was not originally from iTunes, you'll need to redownload it from it's original source or rerip it from the CD. Files can sometimes go bad and become corrupted. As to how or why that happens, there are a number of ways.
What format are the problematic tracks in? Have you tried converting them to another format in iTunes?
iTunes: How to convert a song to a different file format
B-rock

I lost my ipod touch 4g and I have find my iphone on but I dont know how to find it. I need some help to track my stolen ipod touch 4g.

I need some help to track my lost ipod touch 4g

If you set up the Find My iPod service prior to the iPod going missing, then there is a chance that can be tracked, though it depends on a number of factors (the iPod is turned on, connected to a WiFi network, and has not had the Find My iPod service disabled or the iPod been completely restored).
If you did not set up Find My iPod, then there is no way to track it. Contact the police in case someone turns it in, and change any passwords for any online accounts you may have used from your iPod (the iTunes Store, for instance).
Regards.

Need some help in creating Search Help for standard screen/field

I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewarded

Hi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh

HT1222 I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (messages, Facebook, ext..) it glitches and won't load. Any advice?

I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (ie..messages, Facebook, ect..) it glitches and won't load. The blue loading bar will just jump back and forth and the page will not load properly if at all....

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Need some help with MDX formula

Hello, I am not finding any good documentation on MDX formulas, there is a specific one that I need some help with....could someone please elaborate what exactly does this formula mean? thanks.
(MEASURES.[SIGNEDDATA],
CLOSINGPERIOD([%TIMEDIM%].
[%TIMEBASELEVEL%]))

If new MEASURE gets added to Measure's table , in BPC Client , etools->client Options-> Refresh Dimensions should get the new measure into the CurrentView .IF not try etools->client Options-> Clear Local application information .
Formula 2 :
(MEASURES.SIGNEDDATA,
CLOSINGPERIOD(%TIMEDIM%.
%TIMEBASELEVEL%))
This formula is used to retrieve AST & LEQ account values.
If current time member is at monthlevel ,ie ClosingPeriod of 2011.FEB is the current member it self ,and would retrieve 2011.FEB value.
If Current time member is at quarter level then ClosingPeriod of 2011.Q1 is 2011.Mar ,and would retrieve 2011.MAR value.
If Current time member is at year level then ClosingPeriod of 2011.TOTAL is 2011.DEC ,and would retrieve 2011.DEC value.
Formula 1 :
MEASURES.SIGNEDDATA
Irrespective of the level of the Time , MEASURES.SIGNEDDATA would retrieve current Time member value.This formula is used to retrieve INC & EXP account values
if current time member is at month level,2011.FEB , 2011.FEB value is retrieved.
if current time member is at quarter level,2011.Q1 , 2011.Q1(JANFEBMAR) value is retrieved.
if current time member is at year level,2011.TOTAL , 2011.TOTAL(JAN,FEB,....,DEC) value is retrieved.
Hope this helps.

Need some help and guidance please!

Hi everyone,
I desperately need some help because I am at my wits end. In September I purchased a Compaq Presario CQ60-450US. Shortly after purchasing, I fresh installed Windows 7 Professional. Recently I decided to tried to dual boot ubuntu on the machine only to find that the installation failed because of CD read error. I know for a fact that the CD is not the issue because I have used this CD three other times to install ubuntu thus I came to the conclusion that the CD/DVD drive was bad.
I called HP support to get a new CD/DVD drive replaced only to spend 2 hours on the phone with a individual that decided to troubleshoot first trying to install ubuntu remotely (I informed the indiviual that the remote session would end), then by playing a DVD and "skipping throughout" the movie. He/she said that she could see no issue. (no diagnostic was run)I informed the individual that I had issues with buring as well. He/she proceeded to go online and install software asking me to demonstrate the issue after which the call got dropped mysteriously.
I called HP support back and told them that I am having an issue now burning. They proceed to connect remotely and look at the software the previous support individual downloaded and said that the software was not supported by HP. I informed the individual that I give permission to install any software needed to troubleshoot but the individual said that I could not be suppoted because I wasn't using the OS installed by HP. I was instructed to recover my machine to the OS that was installed with the machine if I was to continue to get support.
I informed the individual that the drivers and software are the same for either OS considering the CD/DVD rom is a plug and play device. The individual refused to help and told me I had lost my warranty because of my decision to install an OS directly from Microsoft or a third paper vendor.
That is where I stand. HP is refusing to give me support because I am not running their Vista Home edition even though my issue is hardware. I cannot find any warrent information stating that I need to have the original operating system installed on the machine to receive support. Can anyone point me to a reputable division that can help me with my issue? I feel I was just thrown aside so that they don't have to initiate a repair. If not has anyone filed a compalint against this outrageous support requirement?

Dear ndjumpball,
I would like to say that I have some good -- or at least encouraging -- advice. Regretfully, I do not. I had issues with my dv7 practically since purchasing it a year ago specifically so I would have a reliable computer for school. My first problem: I bought my laptop a mere 7 weeks before HP started offering their free upgrade to Windows 7. Consequently, I was forced to purchase the full installation retail or continue to deal with the wonton freezes and system failures that inevitably occurred while I was working on homework -- courtesy of HP's installation of Vista Home Premium 64-bit. Thankfully, I was able to purchase a copy of Windows 7 Professional 64-bit through a significant student discount offer from Microsoft, and I had my new OS downloaded the evening of October 23, 2009; I had to give their servers time to free up, since it seemed like everyone and their dogs were also downloading what the reviews posted on CNET and PC World touted as being more reliable. I recall (I can't remember exactly which site this appeared) the statement, "Windows 7 is what Vista should have been from the beginning."
I was all excited and happy now that I had a laptop for school that had everything I was looking for: decent size hard drive, a fair amount of RAM, great 17.3" display with awesome colors, and a CDRW/DVDRW/Blu-Ray disk drive in the bay. Not only was I very satisfied with the hardware; it also came with a decent host of software that are thought was pretty cool, too. It came with CyberLink's DVD Suite 6 that I could activate simply by touching a soft button above the keyboard. Aside from Vista Home Premium crashing on me at the most inopportune times, I was exceedingly happy with my $1000 purchase and investment. Then came the "upgrade" to Windows 7 Professional 64-bit...Because I didn't have a "compatible" version of Vista, I had to do a full ("custom") install. In other words, I lost all of the cool features I originally bought the machine for in the first place...no more cool one-finger's brush software activation (still don't have that working), and HP Chat Support told me the same thing they told you. The following is a direct copy/paste quote from an email response I received from HP Total Care: "In order to help you relevantly I would like to request you to please revert back to Vista operating system and check whether the issue is persisting or not. If the issue is still persisting after reverting the operating system back to vista then we need to perform system recovery."
After pursuing my case for 6 months -- finally getting my case escalated to two HP Customer Care Case Managers in Texas/Oklahoma -- the best "customer support" I received was what I'm sure was a truly heartfelt and sincere apology... Oh, neither case manager was "able" to send me either the true upgrade disks that would have preserved the features purchased, nor were they willing to send me a stand-alone installation of the CyberLink’s DVD Suite 6 that is currently offered with the HP Pavilion dv6t Quad Edition series. (In massive frustration and anger, I bought the CyberLink’s DVD software - $100 I didn't have to spend on something I had already bought...)
A month later (late March), MY CD-RW/DVD-RW/Blu-Ray drive stopped working. After an hour online with Customer Care, I had finally convinced the rep that the drive was working fine after my ditching Vista Home Premium, and that its failure had absolutely nothing to do with Windows 7 Pro. After giving the guy my credit card number as security, I had a replacement drive shipped to me.
My personal recommendation: clearly state that the hardware failure had nothing to do with whatever software or OS you chose to install. Bottom line: your computer is only 8 months old and is still covered under warranty, they can replace the defective part, or you can return the entire machine. You probably want to be the "Nice Guy" but you need to remind them that you have other brands available to purchase.
I don't know if that helps or not, but thank you for giving me the opportunity to vent! :-)

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.

This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

My iphone 4 has switch of itself, and cant switch on its blankout , i need some help to solve this matter, My iphone 4 has switch of itself, and cant switch on its blankout , i need some help to solve this matter

i need some help! my i phone has switch off totally blank as if there is no baterry, i cant wsitch on anymore, i live in Africa whereby there is no any apple offises arroung, i want to find a solution thats why i am asking for the help

Plug in iPhone with Wall Charger for 10 minutes, it may turn on itself. If not, keep on Wall Charger and Reset, hold both Home and Power buttons until the iPhone begins to restart. This usually takes less than 20 seconds of holding both buttons.

Need some help with a remove function

Design and code a program that will maintain a list of product names. Use a String type to represent the product name and an array of strings to implement the list. Your program must implement the following methods:
Add a product to the list
Remove a product from the list
Display then entire list
Find out if a particular product is on the list.
You need to create a command command loop with a menu() function. The program must continue asking for input until the user stops.
This is the assignment and this is what I have so far. I need some help writing the remove function.
Thanks
* Title: SimpleSearchableList.java
* Description: this example will show a reasonably efficient and
* simple algorithm for rearranging the value in an array
* in ascending order.
public class SimpleSearchableList {
     private static String[] List = new String[25]; //These variables (field variables)
     private static int Size; //are common to the entire class, but unavailable
     //except to the methods of the class...
     public static void main(String[] args)
          String Cmd;
          for(;;) {
               Menu();
               System.out.print("Command: ");
               Cmd = SimpleIO.inputString();
               if(Cmd.equals("Quit"))
                    break;
               else if(Cmd.equals("Fill"))
                    FillList();
               else if(Cmd.equals("Search"))
                    SearchList();
               else if(Cmd.equals("Show"))
                    ShowList();
               else if(Cmd.equals("Remove"))
                    Remove();
     //Tells you what you can do...
     public static void Menu()
          System.out.println("Choices..................................");
          System.out.println("\tFill to Enter Product");
          System.out.println("\tShow to Show Products");
          System.out.println("\tSearch to Search for Product");
          System.out.println("\tRemove a Product");
          System.out.println("\tQuit");
          System.out.println(".........................................");
     //This method will allow the user to fill an array with values...
     public static void FillList()
          int Count;
          System.out.println("Type Stop to Stop");
          for(Count = 0 ; Count < List.length ; Count++)
               System.out.print("Enter Product: ");
               List[Count] = SimpleIO.inputString();
               if(List[Count].equals("Stop"))
                    break;
          Size = Count;
     //This method will rearrange the values in the array so that
     // go from smallest to largest (ascending) order...
     public static void SearchList()
          String KeyValue;
          boolean NotFoundFlag;
          int Z;
          System.out.println("Enter Product Names Below, Stop To Quit");
          while(true)
               System.out.print("Enter: ");
               KeyValue = SimpleIO.inputString();
               if(KeyValue.equals("Stop")) //Note the use of a method for testing
                    break; // for equality...
               NotFoundFlag = true; //We'll assume the negative
               for(Z = 0 ; Z < Size ; Z++)
                    if(List[Z].equals(KeyValue)) {
                         NotFoundFlag = false; //If we fine the name, we'll reset the flag
          System.out.println(List[Z] + " was found");
               if(NotFoundFlag)
                    System.out.println(KeyValue + " was not found");
     //This method will display the contents of the array...
     public static void ShowList()
          int Z;
          for(Z = 0 ; Z < Size ; Z++)
               System.out.println("Product " + (Z+1) + " = " + List[Z]);
     public static void Remove()
}

I need help removing a product from the arrayYes. So what's your problem?
"Doctor, I need help."
"What's wrong?"
"I need help!"
Great.
By the way, you can't remove anything from an array. You'll have to copy the remaining stuff into a new one, or maybe maintain a list of "empty" slots. Or null the slots and handle that. The first way will be the easiest though.

Ok i have indesign CS6 and all files are stored on a 10.7.5 MAC server. This just started happening. When I open a file indesigns is creating a textfile in the same folder? I need some help on this.

Ok i have indesign CS6 and all files are stored on a 10.7.5 MAC server. This just started happening. When I open a file indesigns is creating a textfile in the same folder? I need some help on this.

Ask in the ID forum and be much more specific about your configuration. there could be any number of reasons why manifests, temp files or restore files are created.
Mylenium

Need some help with downloading PDF's from the net.

need some help with downloading PDF's from the net. Each time I try to click on a link from a website, if it takes me to a new screen to view a pdf, it just comes up as a blank black screen? any suggestions?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

The backup disk image "/Volumes/Data/David Witkowski's Mac Pro.sparsebundle" is already in use. Whenever Time Machine starts to backup to Time Capsuel I get the previous error message. I need some help to fix this.

The backup disk image “/Volumes/Data/David Witkowski’s Mac Pro.sparsebundle” is already in use. Whenever Time Machine starts to backup to Time Capsuel I get the previous error message Where can I find this disk image?. I need some help to fix this.
Thanks,
David W

There are multiple answers and solutions if you look just to the right under the heading of More Like This.

Need some help in finding a specific stroke weight...

Similar Messages

Maybe you are looking for